Messages

Use the warning and error messages to identify the response from IBM® Security Directory Server for the operations that you run against the server.

GLPADC003E
The directory server instance 'instance name' does not exist.
GLPADC008E
Incorrect version for Directory server instance: 'instance name'
GLPADC010E
Failed to generate unique port number for Cloudscape database while configuring the solution for instance: 'instance name'.
GLPADC011E
Failed to generate unique port number for remote API while configuring the solution for instance: 'instance name'
GLPADM003E
Unable to complete the initial feature registration.
GLPADM005E
Admin Audit log file 'file name' is full, unable to log any more records.
GLPADM007E
Admin server attempt to setsockopt() failed to set TCP_NODELAY; errno error value (error string).
GLPADM008E
Admin server call to setsockopt() to set keep alive failed; errno error value (error string).
GLPADM016E
A client sent non-secured communications to the SSL port.
GLPADM018E
Unable to open file 'file'. Try specifying the full path name.
GLPADM019E
Unable to create the necessary thread.
GLPADM020E
Configuration error: server using port port for both SSL and non-SSL.
GLPADM021E
An administrator DN must be specified in the adminDn line.
GLPADM022E
The -p option requires an integer to be specified for the port.
GLPADM023E
The -s option requires an integer to be specified for the secure port.
GLPADM024E
The program is unable to run because of an initialization error.
GLPADM025E
Admin server was unable to start because it could not write to the ibmdiradm.pid file.
GLPADM026E
You are not in the same primary group as the directory server instance owner 'instance name'. Only users in the same primary group as the directory server instance owner can start the Admin server of a directory server instance.
GLPADM027E
Extended operation OID failed, option decimal option is not valid for this request.
GLPADM032E
Failed to create Windows service for Admin server instance: 'instance name'.
GLPADM035E
Failed to stop Admin server instance: 'instance name'.
GLPADM036E
Unable to stop Admin server instance 'instance name', because the state of the server cannot be determined.
GLPADM039E
Failed to delete Windows service for Admin server instance: 'instance name'.
GLPADM040E
Unable to open audit log file 'filename'.
GLPADM042E
No Admin Audit entry found in the configuration file. Admin server starting with no auditing.
GLPADM043E
The -k and -i options cannot be used together.
GLPADM044E
The -k and -u options cannot be used together.
GLPADM045E
The -i and -u options cannot be used together.
GLPADM046E
Problems retrieving entry 'entry DN'.
GLPADM047E
Found an unknown attribute 'attribute name' in entry 'entry DN'.
GLPADM051E
Admin server received a request to start or restart the server with an unsupported option.
GLPADM052E
Incorrect port number specified: port number. Port number must be numeric, in the range 1 - 65535.
GLPADM053W
The Admin server audit configuration entry: entry DN is missing some values. The default values will be used.
GLPADM059E
The admin server configuration entry for backup and restore 'entry DN' attribute 'attribute' is missing or has an invalid value 'value'.
GLPADM063E
The backup requested by the admin server has failed.
GLPADM066E
The restore requested by the admin server has failed.
GLPADM067E
The admin server is currently performing a backup of the directory server.
GLPADM068E
The admin server is currently performing a restore of the directory server.
GLPADM069W
The admin server is stopping the directory server for a scheduled offline backup.
GLPADM072W
The admin server is not configured to perform regularly scheduled backups.
GLPADM074E
The admin server configuration entry for backup and restore 'entry DN' attribute 'attribute' value 'value' specifies an invalid path.
GLPADM075E
The admin server configuration entry for backup and restore 'entry DN' attribute 'attribute' value is not set.
GLPADM076W
The admin server will not backup or restore changelog data if change log is configured.
GLPADR006E
AD to TDS Synchronization for directory server instance: 'instance name' failed.
GLPADR007E
TDS server instance 'instance name' is not accessible.
GLPADR008E
AD to TDS Synchronization solution is not configured for TDS server instance 'instance name'.
GLPADR009E
Incorrect version for directory server instance 'instance name'
GLPADR010E
The directory server instance 'instance name' does not exist.
GLPBLK002E
Disconnect other applications from the directory database and restart program_name.
GLPBLK003E
Parsing entry failed. DN: Distinguished Name.
GLPBLK007E
The file system is full; bulkload cannot write to 'filename'.
GLPBLK008E
The bulkload utility was unable to read the file specified at line line number. The entry was ignored.
GLPBLK009E
Unsupported URL in the entry at line line number. The entry was ignored.
GLPBLK010E
An error occurred in the translation of a value to UTF-8 codeset at line line number. The entry was ignored.
GLPBLK011E
An unrecognized charset name, codeset name, was found in the LDIF file. No translation to UTF-8 was attempted.
GLPBLK012E
utility_program_name: Cannot authenticate DN and password.
GLPBLK013E
utility_program_name failed on 'file_operation' to file: file name.
GLPBLK014E
Disconnect other applications from the directory database and restart program_name.
GLPBLK015E
The -A option value must be 'yes' or 'no'.
GLPBLK016E
The -a option value must be 'parseonly', 'loadonly' or 'parse_and_load'.
GLPBLK017E
The -c option value must be 'yes' or 'no'.
GLPBLK018E
The -E option value must be an integer between 0 and 1000000.
GLPBLK019E
The -e option value must be 'yes' or 'no'.
GLPBLK020E
Starting with the IBM Tivoli Directory Server 6.3 release this message is deprecated.
GLPBLK021E
The -S option value must be 'yes', 'no', or 'only'.
GLPBLK022E
The -x option value must be 'yes' or 'no'.
GLPBLK023E
The -L option value is too long; maximum number of characters is number of characters.
GLPBLK024E
The -R option value must be 'yes' or 'no'.
GLPBLK025E
The -i option is required.
GLPBLK026E
Value of 0 specified for option -k not valid.
GLPBLK027E
The load action option (-a) must be 'parse_and_load' when the -k option is specified.
GLPBLK028E
The Remove tmp (-R option) must be yes when the -k option is specified.
GLPBLK029W
The -s option was specified with an incorrect character delimiter. The default delimiter '|' will be used.
GLPBLK030E
Run DB2CMD.EXE first, and then run bulkload within the DB2 CLP command interpreter.
GLPBLK031E
Options -o and -t are mutually exclusive.
GLPBLK032E
The -o file 'file_name' already exists.
GLPBLK033E
Options -G and -k are mutually exclusive.
GLPBLK034E
The -S option is not allowed when the -k option is specified.
GLPBLK035W
Previous LOAD failure detected in 'filename'. Bulkload will try to restart load operations. ACTION is set to LOADONLY.
GLPBLK036W
Parse only option was chosen last time and detected in 'filename'. But ACTION is not LOADONLY. Bulkload will back up the status file to 'filename.filename_suffix'.
GLPBLK037E
The -a 'loadonly' option was specified but there are no load files to load. 'filename' is not found. Bulkload will stop.
GLPBLK038E
The load only option is chosen but the bulkload status file is either not readable or corrupted. Bulkload will end.
GLPBLK039E
Bulkload failed to rename the old status file 'filename'. Bulkload will end.
GLPBLK040E
Bulkload failed to determine the home directory. Bulkload will end.
GLPBLK041E
Bulkload failed to determine import directory 'path'. Bulkload will end.
GLPBLK042E
Bulkload failed to create the temporary directory under 'path'. Bulkload will end.
GLPBLK043E
Bulkload failed to chdir to 'path'. Bulkload will end.
GLPBLK045E
Input data failed to pass schema checking or parsing completely.
GLPBLK046E
Entry 'DN of entry' above line line number violates the schema definition. The error code is return code.
GLPBLK047E
Entry 'DN of entry' above line line number does not contain objectclass.
GLPBLK048E
UUID 'UUID' in input file not valid.
GLPBLK049E
Entry DN above line line number contains an incorrect ACL definition.
GLPBLK051E
DN 'DN' detected at line line number not valid.
GLPBLK052E
DN 'DN' at line line number exceeds maximum length size limit.
GLPBLK053W
LDADPIMPORT directory is not consistent with the directory specified in 'filename'. For ACTION=LOADONLY, bulkload will use 'path' in filename.
GLPBLK054W
LDADPIMPORT directory is not consistent with the directory specified in 'filename'. Bulkload will use 'path'.
GLPBLK056W
Bulkload failed to remove temporary directory under 'path'.
GLPBLK057E
Error in translation of value from UTF-8 to a database codepage for entry 'DN of entry'.
GLPBLK058E
Entry 'DN of entry' already exists in the directory.
GLPBLK059E
Entry 'DN of entry' already exists in the input file.
GLPBLK060E
Cannot create DB2 table for attribute 'attribute name'.
GLPBLK064E
Entry 'DN of entry' at line line number does not exist in the directory .
GLPBLK065E
Attribute 'attribute name' at line line number is not defined in the schema.
GLPBLK066E
attribute 'attribute name' at line line number is not allowed with option -G.
GLPBLK068E
Attribute 'attribute name' has a maximum value length of integer. Current attribute value is of length integer.
GLPBLK069E
Bulkload error; cannot find input file 'file name'.
GLPBLK070E
Parent entry for 'DN of entry' does not exist.
GLPBLK071E
Bulkload is unable to run because of an initialization error.
GLPBLK074E
An internal error occurred while getting the directory database applications.
GLPBLK098E
An internal error occurred while processing the LDADPIMPORT directory.
GLPBLK099E
The file system is full or a load file exceeded maximum file size.
GLPBLK100E
An internal error occurred while attempting to generate the load script.
GLPBLK101E
An internal error occurred while attempting to stream out the status file.
GLPBLK108E
An internal error occurred while loading the data.
GLPBLK109E
script name failed! rc = rc. The status file file is created and temp directory directory will not be removed. See db2load.log in db2load directory for details.
GLPBLK110E
An internal error occurred while attempting to stream out the status file due to load failure.
GLPBLK111E
An internal error occurred while loading the attribute data.
GLPBLK112E
script name failed! rc = rc. The status file file is created and temp directory directory will not be removed. See db2load.log in db2load directory for details.
GLPBLK113E
An internal error occurred while attempting to stream out the status file due to attribute load failure.
GLPBLK114E
Bulkload failed to remove the ldapimport directory directory file. Bulkload will end.
GLPBLK115E
An internal error occurred while attempting to set file position during parsing.
GLPBLK116E
Line detected: line not valid.
GLPBLK117E
URL processing error at line: line
GLPBLK118E
Codepage conversion failed at line: line
GLPBLK119E
An internal error occurred while attempting to set file position during parsing entries.
GLPBLK120E
Line detected while parsing entries: line not valid.
GLPBLK121E
URL processing error while parsing entries at line: line
GLPBLK122E
Codepage conversion failed while parsing entries at line: line
GLPBLK123E
DN 'DN' detected at line line number while parsing entries not valid.
GLPBLK124E
Attribute 'attribute name' at line line number is not preceded by a DN.
GLPBLK125E
Codepage conversion failed while parsing entries at line: line
GLPBLK126E
Language tag not supported for attribute 'attribute name' in entry 'entry name' at line line number
GLPBLK127E
Language tag not supported for attribute 'attribute name' in entry 'entry name' at line line number
GLPBLK128E
An internal error occurred while attempting to open load file for attribute name.
GLPBLK129E
An internal error occurred while reading load file for attribute name at line line number.
GLPBLK130E
attribute name is not allowed at line line
GLPBLK131E
attribute name is not allowed at line line
GLPBLK132E
Line detected: line not valid.
GLPBLK133E
Codepage conversion failed at line: line
GLPBLK134E
Attribute 'attribute name' at line line number is not preceded by a DN.
GLPBLK135E
Codepage conversion failed at line: line
GLPBLK136E
Language tag not supported for attribute 'attribute name' in entry 'entry name' at line line number
GLPBLK137E
Language tag not supported for attribute 'attribute name' in entry 'entry name' at line line number
GLPBLK138E
An internal error occurred while attempting to open load file for attribute name.
GLPBLK139E
An internal error occurred while reading load file for attribute name at line line number.
GLPBLK140E
An internal error occurred while attempting to close file handles.
GLPBLK142E
An internal error occurred while attempting to stream out the status file.
GLPBLK143E
script name failed! rc = rc. The status file file is created and temp directory directory will not be removed. See db2load.log in db2load directory for details.
GLPBLK144E
An internal error occurred while attempting to stream out the status file due to load failure.
GLPBLK145E
Bulkload failed to remove the ldapimport directory directory file. Bulkload will end.
GLPBLK146E
The status file indicates attr failed but load message file indicates it finished the phase phase successfully. Bulkload will end.
GLPBLK147E
The file system is full or a load file exceeded maximum file size.
GLPBLK148E
An internal error occurred while attempting to generate the load script.
GLPBLK149E
An internal error occurred because bulkload failed to reset variables for the next cardinal number round of parse and load.
GLPBLK152E
Parsing entry failed at line line number.
GLPBLK153E
Operational attribute attribute name is specified more than once.
GLPBLK154E
Entry contains incorrect value for operational attribute attribute name
GLPBLK155E
Option -t is specified and entry contains operational attributes in plain text form.
GLPBLK156E
Option -t was specified and entry contains operational attributes in the LDAP control.
GLPBLK157E
Entry contains operational attributes in both LDAP control and plain text format.
GLPBLK158E
Nested groups exist in the database and nested group processing is not enabled. Bulkload will stop.
GLPBLK159E
Nested groups exist in the input file and nested group processing is not enabled. Bulkload will stop.
GLPBLK161E
Suffix entry 'Suffix entry DN' does not exist.
GLPCAT001E
Requested message number message_number beyond bounds of internal table.
GLPCAT002E
Cannot open message catalog file catalog_name.
GLPCAT003E
A character transformation error occurred while trying to output a message. The UTF-8 codepage conversion failed.
GLPCCH004E
Failed to add change log to directory server instance: 'instance name'.
GLPCCH007E
Failed to configure change log database 'database name' for directory server instance: 'instance name'.
GLPCCH008E
A change log database is already configured in directory server instance 'instance name'.
GLPCCH009E
A database instance is not configured for directory server instance 'instance name'.
GLPCCH010E
Unable to configure change log. No database is configured for directory server instance 'instance name'.
GLPCCH011E
A change log is already configured for directory server instance 'instance name'.
GLPCCH015E
The argument for the -m option must be an integer greater than or equal to 0.
GLPCCH016E
The argument for the -h option must be an integer greater than or equal to 0 and less than or equal to 24.
GLPCCH017E
The argument for the -y option must be an integer greater than or equal to 0.
GLPCCH018E
An internal error occurred while running the idscfgchglg command.
GLPCCH019W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPCCH022E
Failed to set change log maximum entries to 'number of entries'.
GLPCCH025E
Failed to set change log maximum age limit to 'number of days' days 'number of hours' hours.
GLPCDB004E
Failed to add database 'database name' to directory server instance: 'instance name'.
GLPCDB007E
Failed to configure database 'database name' for directory server instance: 'DB2 instance'.
GLPCDB008E
A database is already configured in directory server instance 'instance name'.
GLPCDB009E
A database instance is not configured for directory server instance 'instance name'.
GLPCDB010E
Failed to configure local loopback for directory server instance: 'instance name'.
GLPCDB011E
The specified database location 'location' is not a drive.
GLPCDB012E
The -a -t and -l options are required. The -w is only required if the -n is also specified.
GLPCDB013E
Unable to configure database. No database instance is configured for directory server instance 'instance name'.
GLPCDB014E
A database is already configured for directory server instance 'instance name'.
GLPCDB016E
The -w option is required.
GLPCDB017E
The database administrator user ID specified, 'user name', is not a valid name and violates the DB2 database name naming rules.
GLPCDB018E
The DB2 administrator ID or password you specified is not valid.
GLPCDB019E
The DB2 instance owner ID that you specified does not exist.
GLPCDB020E
The specified directory, 'filename', is not a valid directory, does not exist, or is not writable.
GLPCDB021E
The specified directory, 'filename', does not have enough free space. Specify an existing location that is writable with at least 80 MB of free space.
GLPCDB025E
An internal error occurred while running the idscfgdb command.
GLPCDB026W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPCDB027E
The database name specified, 'database name', is not a valid name and violates the DB2 database name naming rules.
GLPCDB030E
Failed to reconfigure database password.
GLPCDB031E
Unable to determine the primary group of the user 'user name'. The primary group of the DB2 database instance owner must be valid before a database can be configured.
GLPCDB032E
Unable to determine the primary group of the user 'user name'. The primary group of the DB2 database administrator must be valid before a database can be configured.
GLPCDB033E
The database instance owner, 'user name', and the database administrator, 'user name', must have the same primary group.
GLPCDB034E
An internal error occurred while retrieving the database instance for the directory server instance.
GLPCDB036E
The database name specified, 'database name', is reserved for the change log database of the directory server instance.
GLPCDB037W
The specified directory, 'directory', does not have read, write, and execute permissions for the primary group 'group name' of directory server instance owner 'username'.
GLPCDB038E
Unable to determine the ownership and permissions on the directory 'filename'.
GLPCDB040E
An incorrect value for the argument 'argname' is passed. The valid value for this argument is an integer greater than or equal to vldvalue.
GLPCDB042E
An incorrect value for the argument 'argname' is passed. The valid value for this argument is SMS or DMS.
GLPCDB043W
No change to the properties of tablespaces will occur as an existing database will be configured for the directory server instance 'instance name'.
GLPCDB044E
Sufficient disk space is not available for tablespace container.
GLPCDB047E
Error while removing online backup configuration.
GLPCDB048E
Both the arguments 'c' and 'k' can not be passed together.
GLPCDB050E
Specified a backup directory 'filename', that does not exist or is not accessible.
GLPCDB051E
Filename specified with the -u option is invalid.
GLPCDB052E
Filename specified with the -r option is invalid.
GLPCDB053E
Creating a DB2 database in a local code page with the -x option is not supported.
GLPCFG001E
All fields are required.
GLPCFG002E
Invalid DN.
GLPCFG003E
Passwords do not match.
GLPCFG004E
Server must be stopped before running this operation.Do you want to stop the server?
GLPCFG005E
Specified directory is not valid.
GLPCFG006E
The specified location location is not valid. Specify a valid local drive with at least 30 MB of free space.
GLPCFG007E
The specified location location is not valid. Specify a valid location with at least 30 MB of free space.
GLPCFG009E
operation failed.
GLPCFG010E
Specified file does not exist.
GLPCFG011E
No file name specified.
GLPCFG012E
Specified value is not a valid number.
GLPCFG013W
Disabling the change log will destroy the data currently in the change log database. Do you still want to continue?
GLPCFG015W
File already exists. Do you want to overwrite it?
GLPCFG017E
Deletion of a reserved schema file is not allowed.
GLPCFG018E
Deletion of a reserved suffix is not allowed.
GLPCFG019W
Are you sure you want to delete the selected suffix?
GLPCFG020W
Are you sure you want to delete the selected Suffixcount suffixes?
GLPCFG021W
Are you sure you want to delete the selected entry?
GLPCFG022W
Are you sure you want to delete the selected Entrycount entries?
GLPCFG023W
No suffixes are currently available.
GLPCFG024W
No schema files currently available.
GLPCFG025E
Failed to add suffix suffix.
GLPCFG026E
Failed to add file filename schema file.
GLPCFG027E
Failed to remove suffix suffix.
GLPCFG028E
Failed to remove schema file filenames.
GLPCFG029E
Specified database location has insufficient free space. Specify a valid location with minimum 80 MB of free space.
GLPCFG030E
Either the specified user ID or the password is invalid.
GLPCFG031E
The specified database is not valid. Enter a valid database.
GLPCFG032E
Failed to drop the current database instance.
GLPCFG034E
There is currently no database instance available.
GLPCFG035E
There is currently no database available.
GLPCFG038E
No database is currently configured.
GLPCFG041E
Failed to unconfigure database.
GLPCFG042E
Failed to start the task.
GLPCFG043E
Failed to initialize the task.
GLPCFG044E
Task is already running.
GLPCFG045E
IBM Security Directory Server not installed.
GLPCFG048E
Target directory could not be created.
GLPCFG049E
Database location not specified in the configuration file.
GLPCFG050E
DB2 could not be found on the system.
GLPCFG053E
Value specified must be in the range of 0 - 2147483647.
GLPCFG054E
A dependent task is already running or is in an incomplete state.
GLPCFG066E
The specified file system location is not a valid location.
GLPCFG067E
Invalid value for 'Days'. Value expected in the range 0 - 65535.
GLPCFG068E
Invalid value for 'Hours'. Value expected in the range 0 - 24.
GLPCFG069E
RDBM not installed.
GLPCFG070E
The specified location does not contain valid backup files of IBM Security Directory Server. Specify a valid location.
GLPCFG072E
One or more ports specified are the same. Specify unique ports.
GLPCFG073E
The IP address ip and port port combination is already in use by another directory server instance. Specify a unique IP and port combination.
GLPCFG074E
The user name and password do not match the credentials of any existing user on the system.
GLPCFG075E
The database names 'ldapclog' and 'ldapclgb' are reserved and cannot be used for normal database configuration.
GLPCFG076E
Select either the check box or at least one IP from list.
GLPCFG077E
The user name username is not a valid system user.
GLPCFG078E
DB2 instance InstanceName is already associated with another directory server instance.
GLPCFG079E
The user name cannot contain more than count characters.
GLPCFG080E
The user name is not a valid name and violates the directory server instance naming rules.Only the a-z, A-Z, and 0-9 characters are allowed. The user name cannot include accented characters or certain reserved keywords.
GLPCFG081E
The directory server instance 'DirInstanceName' already exists. Specify a unique value.
GLPCFG082E
The encryption seed must contain only printable ISO-8859-1 ASCII characters with values in the range of 33 to 126 inclusive.The encryption seed must be a minimum of 12 and a maximum of 1016 characters in length.
GLPCFG083E
Only a-z, A-Z, and 0-9 allowed.
GLPCFG084E
The user name cannot start with a number.
GLPCFG085E
The encryption seed string cannot start with a number.
GLPCFG086E
An internal error has occurred.
GLPCFG087E
The operation did not complete successfully.
GLPCFG088E
DB2 database is required to successfully migrate the specified directory server.
GLPCFG089W
You have chosen to delete directory server instance instname. This will result in deletion of the instance configuration file, schema files, log files, directories, and other directory server instance system files. The associated database (if any) will not be deleted. Do you want to continue?
GLPCFG090W
You have chosen to delete directory server instance instname and to destroy the associated database instance dbinst. This will result in deletion of the instance configuration file, schema files, log files, directories, and related database information. Do you want to continue ?
GLPCFG091E
The directory server instance is currently running. You must stop the directory server before deleting it.
GLPCFG093E
This directory server instance has no associated DB2 instance. Cannot proceed with database configuration.
GLPCFG094W
Database will be unconfigured. Do you want to continue?
GLPCFG095W
Database will be unconfigured and destroyed. Do you want to continue?
GLPCFG097E
Failed to set administrator DN.
GLPCFG099E
Failed to set administrator password.
GLPCFG100E
The default directory server instance could not be determined. Use the -I option to specify the instance, or set the IDS_LDAP_INSTANCE environment variable before launching idsxcfg.
GLPCFG101E
The directory server instance 'instance_name' does not exist.
GLPCFG102E
The directory server instance owner, 'user name', must be a member of the primary group, 'group name', of the database instance owner, 'user name'.
GLPCFG103E
The directory server instance owner, 'user name', must be a member of the group 'idsldap'.
GLPCFG104E
The password specified violates administrator password policy. A minimum of number of characters characters is required.
GLPCFG105E
The password specified violates administrator password policy. A minimum of number of characters alphabetic characters is required.
GLPCFG106E
The password specified violates administrator password policy. A minimum of number of characters non-alphabetic characters is required.
GLPCFG107E
The password specified violates administrator password policy. A maximum of number of characters repeated characters is allowed.
GLPCFG108E
The password specified violates administrator password policy. A minimum of number of characters characters must be different from the previous password.
GLPCFG109E
The backup directory specified 'directory', does not exist or is not accessible.
GLPCFG110E
An unsupported version was given for migration.
GLPCFG111E
Unable to locate file 'filename'.
GLPCFG112E
Unable to determine location of configuration file.
GLPCFG113E
Unable to read configuration file 'filename'.
GLPCFG114E
Files in backup directory 'directory' are determined to be of version 'version'. Migration will continue based on this migration path.
GLPCFG115E
The log file name and path information from the backed up configuration file will not be preserved by migration. Log file names and paths will be updated to be specific for a directory server instance.
GLPCFG116E
Unable to run command on directory server instance because the state of the server cannot be determined.
GLPCFG117E
A required field has not been entered.
GLPCFG118W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPCFG119E
Select a directory server instance.
GLPCFG120E
The encryption seed and salt values are required. If you do not want to specify these values, clear the Export data for AES-enabled destination server check box.
GLPCFG121E
The encryption salt must only contain printable ISO-8859-1 ASCII characters with values in the range of 33 to 126, and must be exactly 12 characters in length.
GLPCFG122E
The Admin DN and password must be configured before continuing with this operation.
GLPCFG123W
You have not changed the original settings. Do you want to continue?
GLPCFG124E
The database instance 'db2InstanceName' is not present on the system. Migration cannot continue.
GLPCFG125E
The database 'databaseName' is not present on the system. Migration cannot continue.
GLPCFG126E
The directory server instance owner, 'username', must be a member of the group 'Administrators'.
GLPCFG127E
'root' must be a member of the primary group, 'groupName', of the database instance owner, 'username'.
GLPCFG128E
Encryption seed values do not match.
GLPCFG129E
Unable to connect to the server at ldapURL
GLPCFG130E
The server, ldapURL is running in configuration only mode
GLPCFG131E
The server, ldapURL is not running a supported version.
GLPCFG132E
No permission to access the server, ldapURL
GLPCFG133E
Administrator DN or password of the selected instance is not configured.
GLPCFG134E
No path specified.
GLPCFG135E
Unable to retrieve information from the specified server
GLPCFG136E
Path for backup images is required while setting up a peer or replica server.
GLPCFG137E
Unable to add or update the user.
GLPCFG138E
Provide the primary group of the user.
GLPCFG139E
Encryption salt value mismatch.
GLPCFG140E
Unable to load existing configuration.
GLPCFG141W
No performance tuning updates are requested. Do you want to continue?
GLPCFG142E
Unable to load 'statFile'
GLPCFG143E
Unable to fetch total number of entries and average size of an entry in server instance database. Use command line option to update 'inputFile'.
GLPCFG144E
The suffix 'suffix' conflicts with an existing suffix.
GLPCFG145E
The password specified violates administrator password policy. A maximum of number of characters consecutive repeated characters is allowed.
GLPCFG146E
Server must be started before running this operation.Do you want to start the server?
GLPCFG147E
Data not valid in 'field'.
GLPCFG148E
'field value' is not a valid value.
GLPCFG149E
Specified location is not valid.
GLPCFG150E
Specified file already exists.
GLPCFG151E
Invalid administrator DN or password.
GLPCFG152E
None of the options is selected.
GLPCFG153E
Unable to locate the specified command. 'cmd'
GLPCFG154E
Unable to generate statistics using perftune, refer task messages.
GLPCFG159E
Failed to start administration server.
GLPCFG160E
Failed to stop administration server.
GLPCFG164E
Failed to stop server instance.
GLPCFG168E
Initial size must be greater than initialValue pages.
GLPCFG169E
IBM Tivoli Directory Integrator (TDI) is not detected on the system. If TDI is installed at custom install location then set IDS_LDAP_TDI_HOME to TDI install location and restart the utility.
GLPCOM001E
Creation of socket failed; errno error value (error string).
GLPCOM002E
The listen() failed; errno error value (error string).
GLPCOM005E
SocketInit failed for port port number.
GLPCOM006E
SocketInit failed for port port number.
GLPCOM007E
No objectclass was specified for entry entry DN.
GLPCOM008E
The required attribute attribute name is missing for entry entry DN.
GLPCOM009E
The attribute attribute name is not allowed for entry entry DN.
GLPCOM012E
Failed to load plugin from plugin location.
GLPCOM013E
Attribute attribute name not found in schema.
GLPCOM014E
Failed to log on user: user name.
GLPCOM015E
Failed to impersonate user.
GLPCOM016E
Windows operating system error
GLPCOM017W
Log file cleared.
GLPCOM018E
Call to setsockopt() to set reuse failed; errno error value (error string).
GLPCOM019E
The listen() failed; errno error value (error string).
GLPCOM020E
SocketInit failed for port port number.
GLPCOM026E
Objectclass objectclass name not found in schema.
GLPCOM027E
Attempt to bind failed with errno error value (error string).
GLPCOM028E
Codepage codepage value cannot be opened by LDAP server: errno message.
GLPCOM029E
LDAP Configuration file cannot be fully translated to UTF-8 codepage: errno message.
GLPCOM032W
Warning: The attribute table name table name is longer than 128 characters, so the table will be created with the name hashed table name.
GLPCOM034E
This command cannot be started while a backup for directory server instance instance name is in progress.
GLPCOM035E
This command cannot be started while a restore for directory server instance instance name is in progress.
GLPCOM036E
select() system call failed; errno error value (error string).
GLPCOM037E
This command cannot be started for directory server instance instance name while bulkload is in progress.
GLPCRY003E
The encryption seed must contain only printable ISO-8859-1 ASCII characters with values in the range of 33 to 126, and must be a minimum of 12 and a maximum of 1016 characters in length.
GLPCRY004E
The encryption salt must contain only printable ISO-8859-1 ASCII characters with values in the range of 33 to 126, and must be exactly 12 characters in length.
GLPCRY007E
The file name key stash file is inconsistent with the associated encrypted data.
GLPCRY008E
Attempting to write two-way encrypted data without the required key stash file consistency checking.
GLPCRY009E
Password value could not be decrypted.
GLPCSC002E
An internal error occurred while running the idscfgsch command.
GLPCSC003W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPCSC006E
Failed to add schema file: 'schemafile'.
GLPCSC008E
The specified schema file 'schemafile' does not exist on the system or is not accessible.
GLPCSC009E
The schema file 'schemafile' already exists in the configuration file of the directory server instance.
GLPCSC010E
The -s option is required and is used to specify the name of the schema file to add.
GLPCSC011E
The specified schema file 'schemafile' is a directory.
GLPCSF002E
An internal error occurred while running the idscfgsuf command.
GLPCSF003W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPCSF006E
Failed to add suffix: 'suffix'.
GLPCSF008E
The suffix 'suffix' conflicts with an existing suffix in the configuration file of the directory server instance.
GLPCSF009E
The -s option is required and is used to specify the name of the suffix to add.
GLPCTL001E
A directory server instance was not specified.
GLPCTL004E
Failed to create database instance: 'instance name'. The failure might have occurred because the system was not set up correctly before using the tool.
GLPCTL007W
Failed to remove database instance: 'instance name'.
GLPCTL010E
Failed to start database manager for database instance: 'instance name'.
GLPCTL013W
Failed to stop database manager for the database instance: 'instance name'.
GLPCTL016W
Failed to uncatalog database instance node: 'instance name'.
GLPCTL019E
Failed to catalog database instance node: 'instance name'. The failure might have occurred because the system was not set up correctly before using the tool.
GLPCTL022E
Failed to update the database manager: 'instance name'.
GLPCTL025W
Failed to enable multi-page file allocation: 'database name'
GLPCTL028E
Failed to create database: 'database name'. The failure might have occurred because the system was not set up correctly before using the tool.
GLPCTL029E
User 'user name' does not have correct system permissions to create a database in 'location'
GLPCTL030E
The DB2 administrator ID or password specified is not valid.
GLPCTL033W
Failed to remove database: 'database name'.
GLPCTL036E
Failed to update the database: 'database name'
GLPCTL039E
Failed to add local loopback to database: 'database name'. The failure might have occurred because the system was not set up correctly before using the tool.
GLPCTL042W
Failed to remove local loopback from database: 'database name'.
GLPCTL045E
Failed to add local loopback to change log database: 'database name'. The failure might have occurred because the system was not set up correctly before using the tool.
GLPCTL048W
Failed to remove local loopback from the changelog database: 'database name'.
GLPCTL051E
Failed to add TCP/IP services to database instance: 'instance name'. The failure might have occurred because the system was not set up correctly before using the tool.
GLPCTL054W
Failed to remove TCP/IP services from database instance: 'instance name'.
GLPCTL055E
Failed to load shared library 'library name'.
GLPCTL056E
Failed to load symbol from shared library 'library name'.
GLPCTL058E
The file specified to redirect the output to, 'filename', is a directory instead of a file.
GLPCTL059E
The file specified to redirect output to, 'filename', is not writable.
GLPCTL060E
The file specified to redirect output to, 'filename', could not be created.
GLPCTL061E
The file specified to redirect output to, 'filename', could not be opened.
GLPCTL062E
The specified IP address 'IP address' is not a valid IP address for this computer.
GLPCTL064E
Internal error setting terminal attribute.
GLPCTL065E
Unable to reset the display.
GLPCTL066E
The file 'filename' cannot be created. The location is not valid, is not writable, or is not accessible.
GLPCTL067E
The file 'filename' cannot be copied to 'filename'.
GLPCTL068W
Failed to delete the file: 'filename'.
GLPCTL070W
Failed to delete the directory: 'directory'.
GLPCTL071E
The directory server instance repository, 'filename', cannot be read. You do not have authority to read the repository and run this command.
GLPCTL072E
The directory server instance repository, 'filename', cannot be written to. You do not have authority to write to the repository and run this command.
GLPCTL073E
The log file, 'filename', cannot be written to. You do not have authority to write to the log and run this command.
GLPCTL076W
Failed to start admin server for directory server instance: 'instance name'.
GLPCTL079W
Failed to stop admin server for instance: 'instance name'.
GLPCTL082W
Failed to start directory server for directory server instance: 'instance name'.
GLPCTL085W
Failed to stop directory server for directory server instance: 'instance name'.
GLPCTL086E
The directory 'location' cannot be created. The location is not valid, is not writable, or is not accessible.
GLPCTL087E
The directory server instance 'instance name' does not exist.
GLPCTL088E
Unable to run the command on directory server instance 'instance name', while the directory server is running.
GLPCTL089E
Unable to run the command on directory server instance 'instance name', because the state of the directory server cannot be determined.
GLPCTL090E
Unable to run the command on directory server instance 'instance name' because the server configuration file (ibmslapd.conf) for the directory server instance could not be found.
GLPCTL091E
Unable to run the command on directory server instance 'instance name' because the configuration file, 'file name', does not exist, was not accessible, or could not be written to.
GLPCTL092E
Unable to run the command on directory server instance 'instance name'. The command can only be run on directory server instances at version 'version number'.
GLPCTL093E
The directory server instance configuration key stash file, 'filename', cannot be read. You do not have authority to read the repository and run this command.
GLPCTL094E
The directory server instance directory key stash file, 'filename', cannot be read. You do not have authority to read the repository and run this command.
GLPCTL095E
Failure to load key data from directory server instance configuration key stash file 'filename'.
GLPCTL096E
Failure to load key data from directory server instance configuration directory stash file 'filename'.
GLPCTL097E
The directory server instance ,'instance name', is a proxy server. The command cannot be run on a proxy server.
GLPCTL100E
Failed to back up database database name.
GLPCTL103E
Failed to restore backup database database name to configured database database name.
GLPCTL104E
The configuration key stash file data is inconsistent with the associated encrypted data in the configuration file 'filename'.
GLPCTL105E
The encryption synchronization attribute, ibm-slapdCryptoSync, could not be retrieved from directory server instance's configuration file. The attribute is required to validate encrypted data integrity.
GLPCTL106E
Failure to load key data from directory server instance configuration key stash file into memory.
GLPCTL107E
Failed to bind to the configuration file 'filename' of directory server instance 'instance name'. Bind failed with a return code of 'return code'.
GLPCTL108E
Unable to run the command on the directory server instance 'instance name' while the admin server is running.
GLPCTL109E
Unable to run the command on directory server instance 'instance name' because the state of the admin server cannot be determined.
GLPCTL110E
DB2 did not have sufficient access to back up the database to 'location'. The database instance owner 'user ID' and the owner's primary group must be able to access and write to the backup location.
GLPCTL111E
No directory server instance exists on the computer.
GLPCTL112E
Only the root user is authorized to run the command.
GLPCTL117E
The value specified for the 'option' option is blank.
GLPCTL125E
Failed to remove the online backup configuration for the database: 'database name'.
GLPCTL129E
Failed to remove the online backup configuration for the instance: 'instance name'.
GLPCTL130E
Error while allocating memory.
GLPD2L003E
Option -x is not allowed for a subtree that is not a replication context.
GLPD2L004E
db2ldif cannot authenticate DN and password.
GLPD2L005E
db2ldif failed on file_operation to file: file.
GLPD2L006E
db2ldif failed on file_operation to file: file.
GLPD2L007E
db2ldif failed on file_operation to file: file.
GLPD2L008E
db2ldif failed on file_operation to file: file.
GLPD2L009E
Entry DN of entry specified on db2ldif does not exist.
GLPD2L010E
db2ldif unable to run because of initialization error.
GLPD2L012E
Starting with the IBM Tivoli Directory Server 6.1 release this message is deprecated.
GLPD2L013E
The filter DN DN of filter specified is not valid.
GLPD2L014E
The filter entry DN of entry not found.
GLPDBA002E
idsdbmaint is unable to run because of initialization error.
GLPDBA007E
The tablespace LDAPSPACE creation failed.
GLPDBA008E
The tablespace USERSPACE1 creation failed.
GLPDBA009E
The tablespace LDAPSPACE deletion failed.
GLPDBA010E
The tablespace USERSPACE1 deletion failed.
GLPDBA015E
The tablespace LDAPSPACE import failed.
GLPDBA016E
The tablespace USERSPACE1 import failed.
GLPDBA017E
The tablespace LDAPSPACE export failed.
GLPDBA018E
The tablespace USERSPACE1 export failed.
GLPDBA026W
The db2inspect command failed for the table 'tabname'.
GLPDBA035W
Row compression could not be enabled for the table 'tabname'.
GLPDBA045W
The table 'tabname' has not been reorganized.
GLPDBA047W
Statistics on table 'tabname' have not been updated.
GLPDBA048E
The diagpath for database instance 'dbinstance' could not be determined.
GLPDBA049E
An incorrect value for the argument 'argname' is passed. The valid value for this argument is SMS or DMS.
GLPDBA050E
The 'work_dir' option is required with the 'ts_convertion' option.
GLPDBA051E
The specified directory, 'filename', is not a valid directory, does not exist, or is not writable.
GLPDBA052E
The specified directory, 'work_dir', does not have enough free space required for table space conversion.
GLPDBA054E
Unable to estimate the database size.
GLPDBB002E
Specified a backup directory, 'filename', that does not exist or is not accessible.
GLPDBB003E
An internal error occurred while running the idsdbback command.
GLPDBB004W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPDBB005E
The -k <backup dir> option is required. Use the -? option to see the syntax for the idsdbback command.
GLPDBB006E
Unable to back up database. No database instance is configured for directory server instance 'instance name'.
GLPDBB007E
Unable to back up database. No database is configured for directory server instance 'instance name'.
GLPDBB010E
Failed to back up directory server instance 'instance name'.
GLPDBB011E
Unable to retrieve the database name from the directory server instance's configuration file.
GLPDBB012E
Unable to retrieve the database instance name from the directory server instance's configuration file.
GLPDBB013E
Unable to retrieve the database administrator ID from the directory server instance's configuration file.
GLPDBB014E
Unable to retrieve the database administrator password from the directory server instance's configuration file.
GLPDBB017E
Failed to back up the configuration file for directory server instance 'instance name'.
GLPDBB020E
Failed to back up the key stash files for the directory server instance 'instance name'.
GLPDBB023E
Failed to back up the schema files for the directory server instance 'instance name'.
GLPDBB024E
The backup file file name cannot be created or is not writable.
GLPDBB025E
The backup file file name could not be created or was not writable.
GLPDBB028E
Failed to save backup information to a file.
GLPDBB030E
Starting with the IBM Tivoli Directory Server 6.2 release this message is deprecated. A dbback.dat file already exists in the specified location to back up the directory server instance. Specify a directory that does not already contain backup information or delete the backup information.
GLPDBB031E
The request to configure the database for online backups cannot be completed while the directory server is running.
GLPDBB032W
The space available for a future backup is too low. The current backup location: backup path has only free space in MB MB available and the backup just completed required used space in MB MB.
GLPDBB035E
Failed to back up the database properties file for the directory server instance 'instance name'.
GLPDBB038E
Failed to back up the command file for the directory server instance 'instance name'.
GLPDBB041E
Changelog not configured.
GLPDBB044E
Conflicting options in the command line.
GLPDBB047E
The specified path backup path cannot be used for a backup.
GLPDBB050E
The -u switch for online backups is a required command line agument when specifing the -a parameter to set the archive directory. Use the -? option to see the syntax for the idsdbback command.
GLPDBB051E
Failed to create path 'archive path ' for logging inactive log files.
GLPDBM002E
The -I option is required and is used to specify the directory server instance.
GLPDBM003E
The -N option is required and is used to specify the new DB2 install location.
GLPDBM004E
The -u option is required and is used to specify the DB2 User ID.
GLPDBM005E
The -w option is required and is used to specify the DB2 User password.
GLPDBM011E
The DB2 start database manager command failed.
GLPDBM012W
The DB2 database manager is already active.
GLPDBM014E
The DB2 list database directory command failed.
GLPDBM016E
The DB2 connect to database command failed.
GLPDBM018E
The DB2 stop database manager command failed.
GLPDBM023E
Failed to updated the DB2 instance width space to 64 bits.
GLPDBM025E
The DB2 force application all failed.
GLPDBM027E
The DB2 terminate failed.
GLPDBM029E
The DB2 update DBM CFG failed.
GLPDBM033E
DB2 instance migration failed.
GLPDBM035E
DB2 database migration failed for database 'dbname'.
GLPDBM043E
DB2 rebind packages failed.
GLPDBM045E
DB2 activate database command for database 'dbname' failed.
GLPDBM046W
DB2 database is already active.
GLPDBM051E
The new DB2 location specified by the -N option is not a valid path.
GLPDBM053E
The new DB2 location does not support database migration.
GLPDBM056E
Directory instance specified by the -I option is not a valid instance.
GLPDBM058E
Could not find the DB2 instance name from the directory server instance server configuration file.
GLPDBM060E
Could not find the DB2 database name from the directory server instance server configuration file.
GLPDBM062E
The directory server instance version check failed.
GLPDBM064E
DB2 initial version check failed.
GLPDBM066E
Could not find the directory server instance repository file 'instinfo'.
GLPDBM068E
Could not find the directory server instance location 'instloc'.
GLPDBM070E
Could not find the directory server instance configuration file.
GLPDBM072E
Could not determine whether directory server instance 'instance name' is running as 32-bit or a 64-bit application.
GLPDBM074E
Could not find the DB2 install location from the ldapdb.properties file 'db2loc'.
GLPDBM076E
Could not find DB2 information for directory 'db2prop'.
GLPDBM078E
Update operation for 'db2prop' file in the install location failed.
GLPDBM080E
Update operation for 'db2prop' file for the directory server instance failed.
GLPDBM083E
Could not find the directory server instance specific ldapdb.properties file.
GLPDBM085E
The db2 migration tool did not run successfully. Check the log file, 'idsdbmigrlog' for details.
GLPDBM089E
Unable to run the command on directory server instance 'instance name', while the directory server is running.
GLPDBM090E
DB2 User ID 'user id' provided with -u option does not match with DB2 User ID in directory server configuration file.
GLPDBR004E
Failed to restore directory server instance 'instance name'.
GLPDBR007E
Failed to load the backup information from a file.
GLPDBR008E
The backup file file name does not exist or cannot be read.
GLPDBR009E
The location of directory server instance 'instance name' cannot be found.
GLPDBR010E
The file 'file name' located in the backup file 'file name', does not exist, was not accessible, or cannot be written to.
GLPDBR011E
The file 'file name' is missing the database backup information.
GLPDBR014E
Failed to restore the configuration file for the directory server instance 'instance name'.
GLPDBR017W
Failed to restore the key stash files for the directory server instance 'instance name'.
GLPDBR020E
Failed to restore one or more of the schema files for the directory server instance 'instance name'.
GLPDBR021E
Specified a backup directory, 'filename', that does not exist or is not accessible.
GLPDBR022E
The -k <backup dir> option is required. Use the -? option to see the syntax for the idsdbrestore command.
GLPDBR023E
Unable to restore the database. No database instance is configured for directory server instance 'instance name'.
GLPDBR024E
Unable to restore database. No database is configured for directory server instance 'instance name'.
GLPDBR025E
The backup file file name does not exist or cannot be accessed.
GLPDBR027E
An internal error occurred while running the idsdbrestore command.
GLPDBR028W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPDBR029E
The file 'file name' is missing the backup directory server version information.
GLPDBR030E
The file 'file name' is missing the backup operating system information.
GLPDBR031E
The file 'file name' contains information about a backed up directory server instance that does not match the version of directory server instance 'instance name'.
GLPDBR032E
The file 'file name' was backed up from a different operating system. The idsdbrestore command can only restore backup information that was backed up on the same operating system.
GLPDBR033E
The idsdbrestore command can only restore a database to the original database instance with the same database name. The backup up database 'database name' resided in database instance 'database instance' and the configured database 'database name' resides in database instance 'database instance'
GLPDBR036E
Failed to restore the database properties file for the directory server instance 'instance name'.
GLPDBR039E
Failed to restore the command files for the directory server instance 'instance name'.
GLPDBR041E
Unable to restore changelog data; changelog is not configured for this directory server instance.
GLPDBR043E
Conflicting options in the command line requesting a restore for the directory server instance.
GLPDDS002E
The -I option is required and is used to specify the instance name.
GLPDDS003E
The -B option is required and is used to specify the base DN for splitting.
GLPDDS004E
The -i option is required and is used to specify the input file for splitting.
GLPDDS005E
Specify the proxy server configuration file for splitting.
GLPDDS006E
Error while parsing command line arguments.
GLPDDS007E
Exiting ddsetup due to error processing the command line.
GLPDDS008E
Error while validating command line arguments.
GLPDDS009E
Input LDIF file file name does not exist.
GLPDDS012E
Exiting partitioning utility due to error in configuration.
GLPDDS013E
Input argument provided on the command line is missing a value.
GLPDDS014E
Input argument provided on the command line contains all spaces.
GLPDDS025E
The directory path provided by the -l option does not exist.
GLPDDS027E
Error extracting partitioning information from proxy configuration file.
GLPDDS028E
The instance proxy instance provided by -I option is not a proxy server instance.
GLPDDS029E
Number of partitions must be greater than zero.
GLPDDS030E
Number of partitions value exceeds the allowed limit of 50.
GLPDDS031E
Error opening input LDIF file file name.
GLPDDS032E
Exiting partitioning utility due to a setup error.
GLPDDS033E
The output file out file already exists. Exiting partitioning utility.
GLPDDS034E
Error opening output filename file. Exiting partitioning utility.
GLPDDS035E
Exiting partitioning utility due to an internal error.
GLPDDS036E
Error parsing the input LDIF file on line number line no.
GLPDDS039E
Incorrect option specified on the command line.
GLPDDS041E
The partition base DN base DN provided by the -B option is not part of the proxy server's namespace.
GLPDDS042E
Unable to load the partition plugin library.
GLPDDS043E
The partition base DN base DN provided by -B option does not exist in proxy server's configuration file.
GLPDDS044E
A split name does not exist in proxy server's configuration file.
GLPDDS047E
Value for attribute attr is missing.
GLPDDS048E
Failed to write output file filename.
GLPDDS049E
Unable to continue due to parsing errors.
GLPDDS050E
Unable to continue partitioning the entries.
GLPDPW003E
The -p option is required.
GLPDPW008E
Failed to set the directory server administrator password.
GLPDPW011E
Failed to set the directory server administrator DN.
GLPDPW012E
An internal error occurred while running the idsdnpw command.
GLPDPW013W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPDPW014E
The password specified violates administrator password policy. A minimum of number of characters characters is required.
GLPDPW015E
The password specified violates administrator password policy. A minimum of number of characters alphabetic characters is required.
GLPDPW016E
The password specified violates administrator password policy. A minimum of number of characters non-alphabetic characters is required.
GLPDPW017E
The password specified violates administrator password policy. A maximum of number of characters repeated characters is allowed.
GLPDPW018E
The password specified violates administrator password policy. A minimum of number of characters characters must be different from the previous password.
GLPDPW020E
The password specified violates administrator password policy. A maximum of number of characters consecutive repeated characters is allowed.
GLPDSM008E
Problem configuring the XML parser.
GLPDSM010E
Problem configuring the XML transformer.
GLPDSM011E
Problem reading or writing to file.
GLPDSM012E
Problem writing DOMSource to file: file name
GLPDSM013E
Error processing DSML BatchRequest.
GLPDSM015E
Element name must be element name .
GLPDSM016E
BatchResponse: Required elements not set.
GLPDSM017E
LdapResult: All required values are not set.
GLPDSM018E
Incorrect input (not all parentheses are matched): filter
GLPDSM022E
Incorrect input parameters. All options must use -name value syntax.
GLPDSM025E
Incorrect element name. Valid element names are: authRequest, searchRequest, modifyRequest, addRequest, delRequest, modDNRequest, compareRequest, abandonRequest, extendedRequest, searchResponse, authResponse, modifyResponse, addResponse, delResponse, modDNResponse, compareResponse, extendedResponse, errorResponse, searchResultEntry, searchResultReference, searchResultDone.
GLPDSM026E
Input is not of valid Base 64 encoding: input value
GLPDSM027E
error details .
GLPDSM028E
No DsmlResponse returned.
GLPDSM029E
No security principal or credentials supplied.
GLPDSM030E
AbandonRequest is not supported.
GLPDSM031E
AbandonRequest: Incorrect abandonID.
GLPDSM032E
AbandonRequest: All required values are not set.
GLPDSM033E
AddRequest: Unable to add DsmlAttribute.
GLPDSM034E
AddRequest: Incorrect DN.
GLPDSM035E
AddRequest: All required values are not set.
GLPDSM036E
AttibuteDescriptions: Incorrect AttributeDescriptionValue.
GLPDSM037E
AttributeDescriptions: All required values are not set.
GLPDSM038E
AttributeValueAssertion: Incorrect element value.
GLPDSM039E
AttributeValueAssertion: Illegal attribute name.
GLPDSM040E
AttributeValueAssertion: All required values are not set.
GLPDSM041E
AuthRequest: All required values are not set.
GLPDSM042E
BatchMessage: All required values are not set.
GLPDSM043E
CompareRequest: All required values are not set.
GLPDSM044E
ErrorResponse: All required values are not set.
GLPDSM045E
DeleteRequest: All required values are not set.
GLPDSM046E
DsmlAttr: All required values are not set.
GLPDSM047E
DsmlValue: All required values are not set.
GLPDSM048E
ExtendedRequest: All required values are not set.
GLPDSM049E
Presence Filter: All required values are not set.
GLPDSM050E
Equality Filter: All required values are not set.
GLPDSM051E
ApproxMatch Filter: All required values are not set.
GLPDSM052E
GreaterOrEqual Filter: All required values are not set.
GLPDSM053E
LessOrEqual Filter: All required values are not set.
GLPDSM054E
Substrings Filter: All required values are not set.
GLPDSM055E
ExtensibleMatch Filter: All required values are not set.
GLPDSM056E
Filter does not match any supported filter types: filter
GLPDSM057E
Filter: All required values are not set.
GLPDSM058E
Internal Error (related to regular expressions).
GLPDSM059E
Filter has unmatched parentheses. The partial filter below includes the unmatched parenthesis: filter
GLPDSM060E
MatchingRuleAssertion: All required values are not set.
GLPDSM061E
ModifyDNRequest: All required values are not set.
GLPDSM062E
ModifyRequest: All required values are not set.
GLPDSM063E
SearchRequest: All required values are not set.
GLPDSM064E
SearchResponse: All required values are not set.
GLPDSM065E
SearchResultEntry: All required values are not set.
GLPDSM066E
SearchResultReference: Incorrect refURI.
GLPDSM067E
SearchResultReference: All required values are not set.
GLPDSM068E
SubstringFilter: All required values are not set.
GLPDSM069E
Problem opening log file: error details
GLPDSM070E
Incorrect escape sequence in input segment: input segment
GLPDSM071E
DsmlControl: All required values are not set.
GLPDSM072E
DsmlMessage: All required values are not set.
GLPDSM073E
DsmlModification: All required values are not set.
GLPDSM074E
Incorrect parameters in AuthRequest.
GLPDSM075E
Incorrect value for attribute RequestID.
GLPDSM076E
Incorrect value for attribute processing.
GLPDSM077E
Incorrect value for attribute responseOrder.
GLPDSM078E
Illegal value for attribute onError.
GLPDSM079E
DsmlRequest: Element name should be element name .
GLPDSM080E
AuthRequest must be the first element in BatchRequest.
GLPDSM081E
Required RequestID for AuthRequest not set.
GLPDSM082E
Required RequestID not set for element name .
GLPDSM083E
BatchRequest: Required elements are not set.
GLPDSM084E
Duplicate request ID found: request ID
GLPGRP003E
The -w option is required.
GLPGRP008E
Failed to set the user password.
GLPGRP009E
An internal error occurred while running the 'idsadduser' command.
GLPGRP010W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPGRP011W
The user 'user' already exists. The user will be recreated with modified properties.
GLPGRP014E
Script 'script' failed to create user 'user'.
GLPGRP017E
The user 'user' could not be added to group 'group'.
GLPGRP018E
The required options -u and -g are missing.
GLPGRP027E
Failed to create user 'user'. Error code returned by 'command' is error code.
GLPGRP033W
Cannot create group 'group'. Error code returned by 'command' is error code.
GLPGRP035E
Failed to delete user 'user'. Error code returned by 'command' is error code.
GLPGRP036E
Pwdadm failed to clear 'user' password.
GLPGRP037E
'OS' is not a supported operating system.
GLPGRP038E
Unable to change the access of 'directory' directory.
GLPGRP040W
'command' was unable to add user 'root' to group 'command'.
GLPGRP043E
Failed to create user 'user'. Error code returned by 'command' is error code.
GLPGRP045W
Failed to modify file '/etc/group'.
GLPGRP046W
The group 'group' is not defined locally in the '/etc/group' file.
GLPGRP050E
Required script 'script' not found.
GLPGRP051E
The 'User name' user cannot be recreated because an instance already exists for the user.
GLPGRP052W
If the Network Information Service (NIS) database is installed on the system, user properties modification is not recommended.
GLPGRP054E
The primary group, 'group name', of the user , 'user name', is not a valid name and violates the naming rules.
GLPGRP055E
The user ID specified, 'user name', is not a valid name and violates the naming rules.
GLPHST002E
An internal error occurred while running the idssethost command.
GLPHST003W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPHST008E
Failed to configure the IP address information for directory server instance: 'instance name'.
GLPHST009E
The requested IP address change will cause a port conflict with another directory server instance.
GLPHST010E
The -i option is required and was not specified.
GLPHST011W
The Admin Server for the directory server instance is currently running and must be restarted for the change to the IP addresses to take effect.
GLPHST012E
The IP address specified 'IP Address' is not an existing IP Address on the computer.
GLPICR003E
The port number specified by the -a option must be an integer greater than 0 and less than or equal to 65535.
GLPICR004E
The port number specified by the -c option must be an integer greater than 0 and less than or equal to 65535.
GLPICR005E
The port number specified by the -p option must be an integer greater than 0 and less than or equal to 65535.
GLPICR006E
The port number specified by the -s option must be an integer greater than 0 and less than or equal to 65535.
GLPICR007E
The -I option is required and is used to specify the instance name.
GLPICR008E
The directory server instance name specified, 'instance name', is not a valid name and violates the directory server instance name naming rules.
GLPICR009E
The DB2 instance name specified, 'database name', is not a valid name and violates the DB2 instance name naming rules.
GLPICR010E
The DB2 instance name specified, 'db2 instance', must match an existing user ID on the operating system.
GLPICR011E
The directory server instance name specified, 'instance name', must match an existing user ID on the operating system. If a user is to be created, then the -G and -w options must be specified.
GLPICR012E
The -t option cannot be specified if the RDBM component of the server has not been installed on the operating system.
GLPICR018E
The -e option is required.
GLPICR022E
The directory server instance 'instance name' already exists.
GLPICR023E
An internal error occurred while creating the directory server instance.
GLPICR024W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPICR027E
Failed to register directory server instance: 'instance name'.
GLPICR030E
Failed to create directory server instance: 'instance name'.
GLPICR033E
Failed to add database instance 'DB2 instance' to directory server instance: 'instance name'.
GLPICR036E
Failed to create schema files for directory server instance: 'instance name'.
GLPICR039E
Failed to create log files for directory server instance: 'instance name'.
GLPICR042E
Failed to create configuration file for directory server instance: 'instance name'.
GLPICR045E
Failed to create key stash files for directory server instance: 'instance name'.
GLPICR048E
Failed to create profile scripts for directory server instance: 'instance name'.
GLPICR051E
Failed to create directories for directory server instance: 'instance name'.
GLPICR054E
Failed to create DB2 instance link for directory server instance: 'instance name'.
GLPICR055E
The -l option is required and is used to specify the location to create the directory server instance.
GLPICR056E
Failed to retrieve the home directory for the following user: 'user name'.
GLPICR058E
The specified directory, 'filename', is not a valid directory, does not exist, or is not writable.
GLPICR059E
The specified directory server instance location 'location' is not a drive.
GLPICR060E
The database instance specified 'DB2 instance' is already being used by another directory server instance.
GLPICR063E
Failed to create Windows service for the administration server for directory instance: 'instance name'.
GLPICR064W
The Windows service for the administration server for directory instance 'instance name' already exists.
GLPICR067E
Failed to create Windows service for directory server instance: 'instance name'.
GLPICR068W
The Windows service for directory server instance 'instance name' already exists.
GLPICR071E
Failed to add entry to /etc/inittab for the administration server for directory instance: 'instance name'.
GLPICR072W
The entry in /etc/inittab for the administration server for directory instance 'instance name' already exists.
GLPICR075E
Failed to configure ports and IP addresses for directory server instance: 'instance name'.
GLPICR076E
The directory server instance 'instance name' already exists.
GLPICR079E
Failed to configure key stash files for directory server instance: 'instance name'.
GLPICR080E
The specified directory, 'filename', does not have enough free space. Specify an existing location that is writable with at least 30 MB of free space.
GLPICR083E
Failed to configure database instance 'DB2 instance' for directory server instance: 'DB2 instance'.
GLPICR087E
Failed to configure schema files for directory server instance: 'instance name'.
GLPICR090E
Failed to configure log files for directory server instance: 'instance name'.
GLPICR091E
A database instance is already configured in directory server instance 'instance name'.
GLPICR092E
The encryption seed must only contain printable ISO-8859-1 ASCII characters with values in the range of 33 to 126 inclusive, and must be a minimum of 12 and a maximum of 1016 characters in length.
GLPICR093E
The IP address specified 'IP Address' is not an existing IP address on the computer.
GLPICR094E
The ports numbers specified by the -a, -c, -p or -s options must not match each other and must not cause a conflict between any ports in the configuration file of the directory server instance.
GLPICR095E
Port 'port number' is already being used by another directory server instance.
GLPICR096E
The primary group, 'group name', of the user , 'user name', is not a valid name and violates the name naming rules.
GLPICR097E
Unable to determine the primary group of the user 'user name'. The primary group of the directory server instance owner must be validated before a directory server instance can be created.
GLPICR098E
The primary group, 'group name', of the user , 'user name', is not a valid name and violates the name naming rules.
GLPICR099E
Unable to determine the primary group of the user 'user name'. The primary group of the DB2 database instance owner must be valid before a directory server instance can be created.
GLPICR100E
The directory server instance owner, 'user name', must be a member of the primary group, 'group name', of the database instance owner, 'user name'.
GLPICR101E
The directory server instance owner, 'user name', must be a member of the group 'idsldap'.
GLPICR102E
'root' must be a member of the primary group, 'group name', of the database instance owner, 'user name'.
GLPICR105E
Failed to add instance information to the .profile file for directory server instance: 'instance name'.
GLPICR108E
Failed to add environment variables for directory server instance: 'instance name'.
GLPICR111E
Failed to create ibmslapdService.cmd file for directory server instance: 'instance name'.
GLPICR114E
Failed to create ibmdiradmService.cmd file for directory server instance: 'instance name'.
GLPICR115E
Cannot configure database instance because the directory server instance 'instance name' does not exist.
GLPICR116E
The -C option cannot be specified if the RDBM component of the server has not been installed on the operating system.
GLPICR117E
A database instance is already configured for directory server instance 'instance name'.
GLPICR120E
Failed to create runtime executable for directory server instance: 'instance name'.
GLPICR121E
The directory server instance owner, 'user name', must be a member of the group 'Administrators'.
GLPICR122E
The specified directory, 'directory', does not have read, write, and execute permissions for the directory server instance owner 'username'.
GLPICR123E
Unable to determine the ownership and permissions on the directory 'filename'.
GLPICR124E
The location of directory server instance 'instance name' cannot be found.
GLPICR125E
The directory server instance 'instance name' is a proxy server instance for which a database instance cannot be configured.
GLPICR126E
A directory server instance with a DB2 database instance cannot be created because the necessary libraries are not loaded.
GLPICR128E
The encryption salt must contain only printable ISO-8859-1 ASCII characters with values in the range of 33 to 126 inclusive, and must be exactly 12 characters in length.
GLPICR129E
Error on running the idsadduser program.
GLPICR131E
The -G option must be specified in conjunction with -w and vice-versa.
GLPICR132E
The directory server instance owner, 'user name', must be a member of the group 'db2group'.
GLPICR135E
Failed to set the DB2 registry for database instance 'DB2 instance' to allow DB2 SELECTIVITY.
GLPICR136W
The DB2 registry for database instance 'DB2 instance' could not be set to allow DB2 SELECTIVITY but 'IBMSLAPD_USE_SELECTIVITY' is set to 'NO'.
GLPIDL002E
The LDAP URL for the source directory server instance, the -sU option, must be provided.
GLPIDL003E
The administrator DN for the source directory server instance, the -sD option, must be provided.
GLPIDL004E
The administrator DN for the new directory server instance, the -D option, must be provided.
GLPIDL005E
The directory path for the backup of the DB2 database, the -L option, must be provided.
GLPIDL006E
The -x and -r options cannot be used together.
GLPIDL007E
The -x and -p options cannot be used together.
GLPIDL008E
The -L option is required with the -r option. Include a directory path for the database backup and restore.
GLPIDL009E
The -w option is required.
GLPIDL010E
The LDAP URL given for the source directory server instance, the -sU option, is not a valid LDAP URL.
GLPIDL012E
The -sw option is required.
GLPIDL014E
The -a option is required.
GLPIDL016E
Unable to determine what mode the source directory server is running in.
GLPIDL017E
The source directory server is running in configuration only mode.
GLPIDL018E
The source directory server is configured as a proxy server.
GLPIDL019E
The source directory server is configured as an RDBM server.
GLPIDL021E
The encryption seed specified does not match the encryption seed for the source directory server instance.
GLPIDL022E
The encryption seed or encryption salt value could not be retrieved from the source directory server instance.
GLPIDL024E
The source directory server is not running IBM Security Directory Server Version 6.4.
GLPIDL025E
The source directory server type could not be determined.
GLPIDL027E
The directory server instance 'instance name' does not exist.
GLPIDL028E
The specified directory, 'directory', is not a valid directory, does not exist, or is not accessible. Cannot restore database.
GLPIDL029E
The -x and -L options cannot be used together.
GLPIDL030W
The online backup of the source directory server instance database was not successful. Data will not be restored to the new directory server instance.
GLPIDL031E
Cannot establish a connection with the source directory server instance using the LDAP URL provided: 'ldapurl'.
GLPIDL032E
Unable to retrieve the operating system information for the target and source server systems.
GLPIDL034W
The configuration information from the source server for 'configType' could not be copied.
GLPIDL035W
The information for SSL configuration from the source directory server has been copied. Ensure that all necessary files are in place before starting the directory server instance. If desired, set ibm-slapdSslPKCS11Enabled to true.
GLPIDL036W
Unable to transfer one or both of the key database and key stash files for SSL configuration from the source server.
GLPIDL037W
An SSL connection has not been established with the source directory server instance; therefore, information about the SSL configuration of that server will not be copied to the new directory server instance.
GLPIDL038W
The Kerberos configuration information from the source directory server instance has been copied to the target instance, but Kerberos is not currently enabled for the instance. Verify that the information is accurate and applicable to this system and modify the ibm-slapdKrbEnable attribute to be TRUE.
GLPIDL039W
Kerberos is configured for the source directory server instance, but the target system does not support Kerberos. The configuration information will not be copied to the target system.
GLPIDL040W
The restore of the DB2 database associated with the directory server instance was not successful. Data for the source directory server instance will not be loaded.
GLPIDL041W
Any additional plugins defined on the source directory server instance will not be copied to the target directory server instance configuration file. If necessary, plugins must be made available to the target system and added to the configuration file before use.
GLPIDL051W
The replication configuration was not successful. The online backup of the source server will not be performed.
GLPIDL053W
The restore of the database was not successful or was not attempted due to a previous error. For replication to be fully configured, the data must be loaded on the target directory server instance.
GLPIDL055W
Unable to set the server ID. Replication could not be configured.
GLPIDL060W
Replication could not be configured because the source directory server is not currently configured as a master server.
GLPIDL061W
Replication could not be configured because the source directory server is currently configured as a gateway server in the replication topology.
GLPIDL063W
The DB2 backup and restore operations are not permitted between the target operating system, 'targetOS', and the source operating system, 'sourceOS'.
GLPIDL065E
The database instance owner's password (-a option) cannot be specified when a proxy server is being cloned (-x option).
GLPIDL066E
The bind dn and pw to connect to the source server must be the admin DN and PW.
GLPIDL067W
The 'dn' entry cannot be copied to the target server. This entry must be created manually.
GLPIDL068E
The directory server instance name specified, 'instance name', must match an existing user ID on the operating system. If a user is to be created, then the -G and -a options must be specified.
GLPIDL069E
The -G option must be specified in conjunction with -a and vice-versa when deploying a proxy instance.
GLPIDL070E
Restore is not pending for the directory server instance 'instance name'.
GLPIDP004E
Failed to delete directory server instance: 'instance name'.
GLPIDP007E
Failed to remove the DB2 database instance from directory server instance: 'instance name'.
GLPIDP010E
Failed to delete schema files for directory server instance: 'instance name'.
GLPIDP013E
Failed to delete log files for directory server instance: 'instance name'.
GLPIDP016E
Failed to delete configuration file for directory server instance: 'instance name'.
GLPIDP019E
Failed to delete key stash files for directory server instance: 'instance name'.
GLPIDP022E
Failed to delete profile scripts for directory server instance: 'instance name'.
GLPIDP025E
Failed to delete directories for directory server instance: 'instance name'.
GLPIDP028E
Failed to delete DB2 instance link for directory server instance: 'instance name'.
GLPIDP031W
Failed to delete Windows service for the admin server for directory server instance 'instance name'.
GLPIDP034W
Failed to delete Windows service for directory server instance: 'instance name'.
GLPIDP037W
Failed to remove entry from /etc/inittab for the admin server for directory server instance 'instance name'.
GLPIDP038E
The directory server instance 'instance name' does not exist.
GLPIDP041E
Failed to unregister directory server instance: 'instance name'.
GLPIDP042E
The -I option is required and is used to specify the instance name.
GLPIDP046E
The directory server instance 'instance name' does not exist.
GLPIDP049E
An internal error occurred while deleting the directory server instance.
GLPIDP050W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPIDP051E
The directory server instance 'instance name' does not exist.
GLPIDP052E
The location of directory server instance 'instance name' cannot be found.
GLPIDP055E
Failed to unconfigure database instance 'DB2 instance' for directory server instance: 'DB2 instance'.
GLPIDP056E
A database instance is not configured for directory server instance 'instance name'.
GLPIDP059E
Failed to remove instance information from the .profile file for directory server instance: 'instance name'.
GLPIDP062E
Failed to remove environment variables for directory server instance: 'instance name'.
GLPIDP065E
Failed to delete the ibmslapdService.cmd file for directory server instance: 'instance name'.
GLPIDP068E
Failed to delete the ibmdiradmService.cmd file for directory server instance: 'instance name'.
GLPIDP069E
The -r option cannot be specified if the RDBM component of the server has not been installed on the operating system.
GLPIDP070E
A database instance is not configured for directory server instance 'instance name'.
GLPIDP074E
Failed to delete the runtime executable for directory server instance: 'instance name'.
GLPIDP076E
Failed to delete the ldapdb.properties file for directory server instance: 'instance name'.
GLPIDP080E
Failed to remove backup files for directory server instance: 'instance name' from 'backup path'.
GLPIDP081W
The backup location for directory server instance 'instance name' was not configured.
GLPIDP082W
The backup location 'backup path' for directory server instance 'instance name' does not exist.
GLPILT002E
An internal error occurred while running the idsilist command.
GLPILT003W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPILT018E
The -a and -r options cannot be specified at the same time.
GLPISA004E
You must be the root user to run this command.
GLPISA006E
Not a supported operating system: OS
GLPISA007E
Unexpected program name: program name
GLPISA010E
Wrong version of program name. The correct version must be: Version Dir
GLPISA013W
Target file not found: Target File
GLPISA016E
Bitmode=BITMODE is not a supported bit mode.
GLPISA017E
Failed to run: command to execute
GLPISA018W
Not setting this link: link to set
GLPISA019E
Cannot set and remove link in one command.
GLPISA020E
Option was not correctly specified.
GLPISA021E
Invalid argument=option argument
GLPISA023W
Overriding conflict of set description is not allowed because a version of IBM Security Directory Server that is before 6.0 exists.
GLPISA025W
Conflicts found. Cannot set links for set description.
GLPISA035E
Lists to copy are empty or corrupted.
GLPISA036E
From and to lists to copy have unmatched number of elements
GLPISA037W
Not a valid IDSWebApp.war file.
GLPISA042E
The specified profile already exists. Specify another name.
GLPISA045E
The command line parameter, parameter, is not valid. Use -usage to see the available command line options.
GLPISA046E
The IDSWebApp.war uninstallation failed. Upgrade cannot continue.
GLPISA047E
The Embedded WAS PreUpgrade failed. Upgrade cannot continue.
GLPISA048E
The Embedded WAS PostUpgrade failed. Upgrade cannot continue.
GLPISA049E
Error copying the IDSWebApp.war file. Upgrade cannot continue.
GLPISA050E
Error running wsadmin command. Upgrade cannot continue.
GLPISA052E
The specified profile already exists. Specify another name.
GLPISA053E
The current Embedded WebSphere Application Server directory contains a deployed IBM Security Directory Server Web Administration Tool. Upgrade cannot continue.
GLPISA054E
The current IBM Security Directory Web Administration tool must be installed.
GLPISA055E
Cannot back up previous IDSWebApp configuration. Upgrade cannot continue.
GLPISA056E
Cannot restore previous IDSWebApp configuration. Backed up files stored at: RESTORE
GLPJBP006E
Error occurred while connecting to server: error details.
GLPJBP007E
Exception occurred while initializing server server name for SSL. Required parameters are missing. Required parameters: TrustStore, TrustStorePwd, TrustStoreType, KeyStore, KeyStorePwd, KeyStoreType.
GLPJBP011E
Tool is unable to start.
GLPJBP013E
Exception: exception text
GLPJBP015E
Failed to determine the server version for one of the servers.
GLPJBP016W
Password policy is not enabled on one of the servers. Password policy attributes on entries will be ignored during comparisons.
GLPJBP017E
Cannot open the specified file for LDIF output generation.LDIF file will not be created.
GLPJBP018E
Exception occurred while closing the LDIF file: exception details
GLPJBP019E
Missing arguments: Value not specified for argument name.
GLPJBP020W
The supplier and consumer servers have different encryption seed or salt values. The operation will take longer.
GLPJBP021E
Missing required argument; refer to the usage description for valid syntax.
GLPJBP022E
Exception occurred while adding DN to LDIF file: exception details
GLPJBP023E
Exception occurred while deleting DN from LDIF file: exception details
GLPJBP024E
Exception occurred while modifying DN in LDIF file: exception details
GLPJBP025E
Unable to search RootDSE: DirContext is Null.
GLPJBP026E
No RootDSE attributes were returned.
GLPJBP027E
Error occurred during enumeration of attributes from entry name.
GLPJBP028E
Error occurred while reading rootDSE attributes: error details
GLPJBP029E
No naming contexts were found in the rootDSE for this server.
GLPJBP030E
No subschemasubentry found in rootDSE.
GLPJBP031E
An exception occurred during search: exception details.
GLPJBP032E
Error occurred while processing search results for server: error details.
GLPJBP033E
Error occurred while setting environment variables: error details.
GLPJBP034E
Unable to continue. IBM Tivoli Directory Server version 5.1 or higher is required.
GLPJBP039W
The supplier and consumer servers have different encryption settings. The operation may take longer.
GLPJBP040E
Error while retrieving attributes of base DN.
GLPJBP041E
Exception occurred while processing DN.
GLPJBP042E
Exception occurred while fetching attributes from server.
GLPJBP043E
Exception occurred.
GLPJBP044E
Exception occurred while writing binary data to LDIF file.
GLPJBP045E
Invalid entry format for: count or port.
GLPJBP046E
Missing JSSE package for SSL connection.
GLPJBP047E
Specified SASL mechanism is not available for server server name.
GLPJBP048E
Unable to fix entry
GLPJBP049E
Error occurred while retrieving filter ACL support of the server.
GLPJBP050E
Error occurred while quiescing the server.
GLPJBP051E
Error occurred while unquiescing the server.
GLPJBP052E
Error occurred while retrieving type of the server.
GLPJBP054E
Error occurred while setting the replication controls.
GLPJBP055E
Supplier and consumer servers cannot be the same.
GLPJBP056E
Internal error occurred.
GLPKEY002E
The -s option is required and is used to specify the salt value.
GLPKEY003E
The -l option is required and is used to specify the location to create the directory key stash file.
GLPKEY004E
The specified directory, 'location', is not a valid directory, does not exist, or is not writable.
GLPKEY005E
The -e option is required.
GLPKEY007E
The encryption seed must contain only printable ISO-8859-1 ASCII characters with values in the range of 33 to 126 inclusive, and must be a minimum of 12 and a maximum of 1016 characters in length.
GLPKEY008E
The encryption salt must contain only printable ISO-8859-1 ASCII characters with values in the range of 33 to 126 inclusive, and must be exactly 12 characters in length.
GLPKEY010E
The directory key stash file file name cannot be created or was not writable.
GLPKEY013E
Failed to create directory key stash file: 'filename'.
GLPKEY014E
An internal error occurred while creating the directory key stash file.
GLPKEY015W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPL2D002E
ldif2db: entry ending on line line number in LDIF file filename does not have a valid separator. The entry is ignored.
GLPL2D004E
ldif2db: Cannot authenticate DN and password.
GLPL2D005E
ldif2db failed on file_operation to file: file.
GLPL2D006E
ldif2db cannot connect to the directory database at this time.
GLPL2D007E
Database is set to read-only in the IBM Security Directory Server configuration file. No entries can be loaded.
GLPL2D008E
The attribute attribute name on line line number is not preceded by a dn.
GLPL2D009E
Importing the entry dn is not supported by ldif2db.
GLPL2D010E
Importing the entry dn is not supported by ldif2db.
GLPL2D011E
The -i option is required.
GLPL2D012E
The -r option value must be 'yes' or 'no'.
GLPL2D013E
The -W option requires a file name to be specified.
GLPL2D014E
Suffix entry has not been created for entry DN of entry.
GLPL2D015E
Cannot find input file filename.
GLPL2D016E
An error occurred during RDBM backend initialization, rc = error code.
GLPL2D017E
ldif2db unable to run because of initialization error.
GLPL2D018E
Input file contains incorrect data at line line number.
GLPLMT002E
Could not archive file file1 to file2 : file permissions.
GLPLMT003E
Could not archive file file1 to file2 : not enough space.
GLPLMT005E
Value of attribute is invalid
GLPLMT007E
file will not be archived. attribute is not set
GLPLMT013E
Cannot contact CARS server hostname at port
GLPLMT014E
Error sending data to CARS server hostname at port
GLPLMT016E
Invalid command line options. The -I option cannot be specified with -t -a and -p.
GLPLMT017E
The instance instancename specified does not exist.
GLPLMT018E
The instance instancename specified does not match with the OS user running the Log Management tool.
GLPLMT019E
Only root user can perform this operation.
GLPLMT020E
Invalid command line options. The -k option cannot be specified with -t -a and -p.
GLPLMT021E
Unable to obtain port number for TDI server: Max retries exceeded.
GLPLMT022E
Log Management capability for this server instance is already enabled.
GLPLMT023E
Log Management capability for this server instance is already disabled.
GLPLMT024E
Unable to get TDI server's port number.
GLPLMT025E
File file does not exist. Unable to get TDI server's port number.
GLPLMT027E
Invalid command line options. The -k option can be used only in conjunction with -I.
GLPMIG003E
Specified a backup directory, 'directory', that does not exist or is not accessible.
GLPMIG004E
Cannot read V3.modifiedschema file in the 'directory' directory.
GLPMIG005E
Unable to modify V3.modifiedschema file with information in 'filename' file.
GLPMIG006E
Unable to copy file 'filename1' to 'filename2'.
GLPMIG007E
Unable to create file, 'filename'.
GLPMIG009E
Unable to read file, 'file', in directory, 'directory'.
GLPMIG010E
Unable to copy file 'filename1' to 'filename2' file.
GLPMIG011E
Unable to read file, 'filename'.
GLPMIG012E
Unable to delete file, 'filename'.
GLPMIG013E
Unable to write file, 'filename', to directory, 'directory'.
GLPMIG014E
Unable to read schema files from directory, 'directory'.
GLPMIG015E
Unable to write schema files to directory, 'directory'.
GLPMIG016E
The location for the directory server instance 'instance name' cannot be found.
GLPMIG017E
Unable to migrate the schema files from version 'starting version' to version 'ending version'.
GLPMIG019E
Files in backup directory, 'directory', are determined to be of version, 'version'. This is an unsupported migration path.
GLPMIG020E
Unable to locate file, 'filename', in directory, 'directory'.
GLPMIG022E
All necessary files for directory server instance, 'instance name', cannot be found in directory, 'directory'.
GLPMIG023W
Migration has checked the V3.modifiedschema file against the base schema files for any definition collisions. If any collisions are reported, these will be automatically resolved.
GLPMIG024E
Unable to migrate the configuration file from version 'starting version' to version 'ending version'.
GLPMIG026E
Unable to read in configuration file, 'filename'.
GLPMIG030W
The files in the backup directory, 'directory name', are determined to be from version 3.2.2. Due to database compatibility issues, any database information contained in the configuration file will not be migrated.
GLPMIG034E
The -u option must be specified for the backup directory.
GLPMIG036W
The log file name and path information from the backed up configuration file will not be preserved by migration. Log file names and paths will be updated to be specific for a directory server instance.
GLPMIG040E
The DB2 database instance listed in the backed up configuration file cannot be found on the system.
GLPMIG041E
The database name listed in the backed up configuration file cannot be found on the system.
GLPMIG042E
The changelog database name listed in the backed up configuration file cannot be found on the system.
GLPMIG043W
Not all of the schema files included in the configuration file have been found in the backup directory. Check the file names and paths for the included schema files before starting the server.
GLPMIG044W
The file, 'file name', is included in the configuration file but could not be found in the given backup directory, 'directory'.
GLPMIG046E
The DB2 database instance, 'instance name', from the backed up configuration file was found on the system. However, a matching user ID does not exist on the operating system.
GLPMIG047W
The database instance name , 'database instance name', is being overridden by the database instance information from the backed up configuration file. The database instance name, 'database instance name', will be used instead.
GLPMIG048W
The schema files were not migrated and must be migrated manually.
GLPMIG049E
The backup directory must not be specified for this migration scenario.
GLPMIG051E
Encryption key or encryption salt value must not be specified for this migration scenario.
GLPMIG053E
DB2 version specified in the file 'prop_file_name' is not valid.
GLPMIG054E
An error occurred while migrating schema and configuration files. The files were successfully restored to their original state.
GLPMIG055E
An error occurred while migrating schema and configuration files. The files could not be restored to their original state.
GLPMIG057E
Error while allocating memory.
GLPMIG058E
Unable to migrate a RDBM instance into a PROXY only installation environment.
GLPMIG059W
Unable to start the task of DB2 instance and database migration because of insufficient information.
GLPMIG068E
Unable to retrieve DB2 information from the ldapdb.properties file.
GLPMIG074E
Remote migration is detected on the system when the server instance already exists.
GLPPFT001E
Error while extracting information from the server configuration file fileName.
GLPPFT002E
Unable to find input configuration file fileName.
GLPPFT004E
Unable to find the status file fileName.
GLPPFT006E
Incorrect combination of command line options. Monitor switches can either be enabled or disabled.
GLPPFT018E
The database instance name was not found in the server configuration file.
GLPPFT019E
An error result was returned from DB2. Reason: error details
GLPPFT020E
Syntax error found in the property file pfile line number: lineno
GLPPFT021E
Unable to bind to server.
GLPPFT022E
Incorrect command line option specified.
GLPPFT023E
Incorrect filtercache size specified.
GLPPFT025E
Out of memory.
GLPPFT026E
An internal error occurred while running the idsperftune command.
GLPPFT027E
Value specified for DB2 parameter dbparam 'dbval' should be less than dbval .
GLPPFT029W
Not enough data available to perform the advanced tuning operation.
GLPPRT002E
An internal error occurred while running the idssetport command.
GLPPRT003W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPPRT010E
Failed to set port to 'port number' for directory server instance: 'instance name'.
GLPPRT013E
Failed to set secure port to 'port number' for directory server instance: 'instance name'.
GLPPRT016E
Failed to set admin server port to 'port number' for directory server instance: 'instance name'.
GLPPRT019E
Failed to set admin server secure port to 'port number' for directory server instance: 'instance name'.
GLPPRT020E
The port number specified by the -a option must be an integer greater than 0 and less than or equal to 65535.
GLPPRT021E
The port number specified by the -c option must be an integer greater than 0 and less than or equal to 65535.
GLPPRT022E
The port number specified by the -p option must be an integer greater than 0 and less than or equal to 65535.
GLPPRT023E
The port number specified by the -s option must be an integer greater than 0 and less than or equal to 65535.
GLPPRT024E
The port numbers specified by the -a, -c, -p, and -s options must not match each other and must not cause a conflict between any ports in the configuration file of the directory server instance.
GLPPRT025E
Port 'port number' is already being used by another directory server instance.
GLPPRT026E
The -a, -c, -p, or -s option is required to specify a port to configure.
GLPPRT027W
The admin server for the directory server instance is currently running and must be restarted for the change to the port to take effect.
GLPPRT028W
The admin server for the directory server instance is currently running and must be restarted for the change to the secure port to take effect.
GLPPXY001E
Unable to connect to back-end server host name on port port number. Verify that the back-end server is started.
GLPPXY002E
The URL ldap:// qualified URL is invalid.
GLPPXY004E
Connection to back-end server host name:port number is down.
GLPPXY005E
The bind method bind method specified under config DN section is invalid. Reverting to SIMPLE bind.
GLPPXY006E
The specified proxy connection pool size number of connections in section config file DN is invalid.
GLPPXY007E
The specified server host name cannot be contacted after attempts attempts. Server will be unavailable.
GLPPXY008E
The server host name:port does not support the required control OID.
GLPPXY009E
The server host name:port does not support the required capability OID.
GLPPXY010E
The configuration file does not contain any entries for back-end servers. No data will be available.
GLPPXY011E
Proxy server is unable to bind to host host name using the credentials bind DN used.
GLPPXY012E
The credentials bind DN used supplied for host host name are not administrative.
GLPPXY013E
There are no data partitions defined in the configuration file. No data will be available.
GLPPXY014E
The specified DN object DN is not held in any of the proxied contexts.
GLPPXY015E
A referral was returned while performing an operation on object DN.
GLPPXY016E
The back-end server server ID is down.
GLPPXY017E
Error error string occurred for back-end server 'server ID': GSSAPI bind failed using principal name 'dn'.
GLPPXY018E
The DN original entry DN cannot be modified to new object DN.
GLPPXY019E
Entry DN of entry specified on bind does not exist.
GLPPXY020E
Entry DN of entry specified on compare does not exist.
GLPPXY021E
Entry DN of entry to be deleted does not exist.
GLPPXY022E
Entry DN of entry to be modified does not exist.
GLPPXY023E
Entry DN of entry to be renamed or moved does not exist.
GLPPXY024E
The entry object DN already exists.
GLPPXY025E
The server server ID is down. Failing over to server server ID.
GLPPXY026E
The value of ibm-slapdProxyNumPartitions in entry config file entry DN must be greater than zero.
GLPPXY027E
The DN config entry DN specified for attribute attribute name in entry config entry DN is not valid.
GLPPXY028E
The DN back-end Server config entry DN is not located anywhere in the configuration file.
GLPPXY029E
The value of ibm-slapdProxyPartitionIndex in entry config file entry DN must be greater than zero.
GLPPXY030E
The server host name:port does not support the required extension OID.
GLPPXY031E
All back-end servers in server group DN are down.
GLPPXY033E
Internal transaction Tran Id against back-end server ldap url was stopped.
GLPPXY036E
All writable back-end servers within the partition name partition are unavailable. All write operations will fail until a writable back-end server is back online.
GLPPXY037E
The primary write server host name:port for the partition name partition is down. Failing over to server: host name:port.
GLPPXY038E
All back-end servers within the partition name partition are unavailable.
GLPPXY039E
A partition number number that is not valid is returned by the DN partitioning plugin for DN.
GLPPXY044E
The back-end server server ID is unresponsive.
GLPPXY046E
The back-end server server ID is started in configuration only mode.
GLPPXY047E
Unable to retrieve the server ID for the back-end server server ID.
GLPPXY048E
The back-end server server ID is currently running in configuration only mode.
GLPPXY049E
There was an error while parsing required information from the back-end server server ID.
GLPPXY050E
Transaction request to back-end server server host name and port failed because too many connections are currently in use by transactions.
GLPPXY051E
Request to back-end server server host name and port failed because all the connections are currently in use by transactions.
GLPPXY052W
More than one attribute: attribute type defined in the entry: entry DN. Only the first attribute value attribute value will be used.
GLPPXY053E
Failed to add back-end server stored in entry: entry DN.
GLPPXY064W
All writable back-end servers within tier previous tier number of partition partition name are unavailable. Failing over to tier next tier number.
GLPPXY067E
The specified proxy status interval status interval in section config file dn is invalid.
GLPPXY074E
Unsupported scope specified on ibm-allMembers search. Only base level ibm-allMembers searches are allowed.
GLPPXY077E
The proxy server configuration is missing the required split container for cn=ibmpolicies.
GLPPXY080E
Unsupported scope specified on ibm-allGroups search. Only base level ibm-allGroups searches are allowed.
GLPPXY081E
Unsupported NULL based subtree search requested.
GLPPXY082E
Unsupported attribute attribute type on compare request.
GLPPXY083E
Update operations are not allowed on the split point entry entry DN.
GLPPXY084W
The local administrator entry DN has requested the schema updates. The updates will not be propagated to the backend servers.
GLPRDB001E
Error code error_code from function: SQL function error message .
GLPRDB002W
utility program name: number added entries have been successfully added out of number attempted attempted.
GLPRDB003E
database name parameter is missing from LDAP directory configuration file.
GLPRDB004E
The directory server is unable to connect to the database.
GLPRDB005E
DN does not have permission to all parts of the filter or the RDN. The search operation cannot return any results.
GLPRDB006E
Only one attribute-value pair can be compared at a time.
GLPRDB007E
When adding the ownerPropagate field, the entryOwner field must also be added.
GLPRDB008E
When adding the aclPropagate field, the aclEntry field must also be added.
GLPRDB009E
An explicit ACL must be set in order to change or delete this attribute value.
GLPRDB010E
An explicit owner must be set in order to change or delete this attribute value.
GLPRDB011E
Cannot delete and change the same attribute.
GLPRDB012E
Starting with the IBM Tivoli Directory Server 6.1 release this message is deprecated.
GLPRDB013E
The DnType type value specified in the aclentry is not valid. Valid values are: 'access-id', 'group', and 'role'.
GLPRDB014E
The prefix prefix value specified for a permission set is not valid. Valid prefixes are: 'normal', 'critical', 'sensitive', 'system', 'restricted' and 'object'.
GLPRDB015E
DB2 codepage cannot be determined.
GLPRDB016E
DB2 codepage codepage number is not supported by the LDAP server.
GLPRDB017E
XPG4 codepage codepage number cannot be opened by LDAP server: error message.
GLPRDB018E
Incoming data cannot be fully translated to DB2 codepage: codepage number.
GLPRDB019E
Entry entry DN cannot be modified.
GLPRDB020E
Entry entry DN cannot be modified.
GLPRDB021E
The length length specified for attribute attribute exceeds the maximum schema length.
GLPRDB022E
Specified DB2 column length length for attribute attribute must match the length defined for the attribute syntax.
GLPRDB023W
The server is not caching attributes for search filter resolution because not enough memory was configured for attribute caching.
GLPRDB024E
The server cannot load attribute caching because an internal error occurred.
GLPRDB025E
The server cannot cache the objectclass attribute when the environment variable OC_ALIAS is set to Yes.
GLPRDB026E
The server cannot cache attribute attribute name for search filter resolution because it is not a supported attribute.
GLPRDB027E
The server cannot load all configured attribute caches for search filter resolution because not enough memory was configured to hold all configured attribute caches.
GLPRDB028E
The server deleted the cache for attribute attribute_name for search filter resolution because not enough memory was configured to hold all attribute caches configured.
GLPRDB029E
The server deleted the cache for attribute attribute_name for search filter resolution because an error occurred that would have caused the cache to become corrupted.
GLPRDB030E
Migration of the REF attribute table failed.
GLPRDB031E
Failed to drop the unique constraint for attribute attribute_name.
GLPRDB032E
Failed to add the unique constraint for attribute attribute_name.
GLPRDB033E
The server cannot support language tags for attribute attribute_name.
GLPRDB034E
Because attribute attribute name is not defined in the schema, the unique attributes feature cannot be supported for this attribute.
GLPRDB035E
Because attribute attribute name is defined to allow language tags, the unique attributes feature cannot be supported for this attribute.
GLPRDB036E
The unique attributes feature does not support attribute attribute_name. The list of attributes the unique attributes feature does not support includes, but is not limited to, the following: operational attributes, configuration attributes, binary attributes, and the cn and objectclass attributes.
GLPRDB037E
The unique attributes feature does not support attribute attribute_name. The list of attributes the unique attributes feature does not support includes, but is not limited to, the following: operational attributes, configuration attributes, binary attributes, and the objectclass attribute.
GLPRDB038E
utility_program_name is unable to connect to the database.
GLPRDB039E
database_userid parameter is missing from LDAP directory configuration file.
GLPRDB040E
database_user_password parameter is missing from LDAP directory configuration file.
GLPRDB041E
When adding the ownerPropagate field, the entryOwner field must also be added.
GLPRDB042E
When deleting the entryOwner field, the ownerPropagate field must also be deleted.
GLPRDB043E
When adding the aclPropagate field, the aclEntry field must also be added.
GLPRDB044E
When deleting the aclEntry field, the aclPropagate field must also be deleted.
GLPRDB045E
Unable to connect to database; program terminating.
GLPRDB046E
Unable to connect to database; program terminating.
GLPRDB047E
Moving entry 'entry DN' to suffix suffix is not allowed.
GLPRDB048E
Moving entry 'entry DN' is not allowed.
GLPRDB049E
Moving entry to 'new entry DN' is not allowed.
GLPRDB050E
Attribute attribute name was not found in the schema definition.
GLPRDB051E
Entry DN of entry already exists.
GLPRDB052E
Entry DN of entry already exists.
GLPRDB053E
Entry DN of entry violates the schema definition.
GLPRDB054E
Entry DN of entry violates the schema definition.
GLPRDB055E
Parent entry does not exist for entry DN of entry.
GLPRDB056E
Parent entry does not exist for entry DN of entry.
GLPRDB057E
Parent entry does not exist for entry DN of entry.
GLPRDB058E
Entry size size is greater than the maximum size supported (max size).
GLPRDB059E
An SQL call failed: SQL routine name.
GLPRDB060E
Entry DN of entry specified on bind does not exist.
GLPRDB061E
Entry DN of entry specified on compare does not exist.
GLPRDB062E
Entry DN of entry to be deleted does not exist.
GLPRDB063E
Entry DN of entry to be modified does not exist.
GLPRDB064E
Entry DN of entry to be renamed or moved does not exist.
GLPRDB065E
The new superior DN DN of entry that the entry was to be moved to does not exist.
GLPRDB066E
The attribute attribute name with value attribute value already exists.
GLPRDB067E
Entry DN of entry does not contain attribute attribute name.
GLPRDB068E
Entry DN of entry does not contain attribute attribute name with value attribute value.
GLPRDB069E
Attribute attribute name has a maximum value length of max length. Current attribute value is of length current length.
GLPRDB070E
DB2CLI error, SQL data is: native return code=DB2 rc, SQL state=DB2 SQL state, SQL message=message text.
GLPRDB071E
An error occurred during backend identifier backend initialization, rc = return code.
GLPRDB072E
Distinguished name DN might have partial access.
GLPRDB073E
Starting with the IBM Tivoli Directory Server 6.1 release this message is deprecated.
GLPRDB074E
Replication conflict adding DN occurred. The entry was replaced.
GLPRDB075E
Replication conflict: an add of entry DN was rejected because it had an older timestamp.
GLPRDB076E
Specified attribute length attribute length for attribute attribute name must not be less than the length currently defined for the attribute.
GLPRDB077E
Modifying attribute table name, column name, or syntax is not allowed when the attribute attribute name already contains data.
GLPRDB078E
Specified attribute length attribute length for attribute attribute name causes the total size of columns to exceed the maximum record size.
GLPRDB079W
Attribute table name attribute name is longer than 16 characters. The current table name current table name for this attribute is being renamed to table name.
GLPRDB080E
To increase the maximum length of attribute attribute name, its data type must be either VARCHAR, VARGRAPHIC or LONG VARCHAR.
GLPRDB081E
Transaction log is either full or running out of disk space. The current database operation will be rolled back to the last committed state.
GLPRDB082E
The request to increase the size of attribute attribute name was not completed successfully due to failed DB2 operation(s). A partial change (creation of the temporary table temporary table name) has been committed in the database. Issue the modify request again or remove the temporary table temporary table name from your database.
GLPRDB083E
The server cannot be started because a newer version of the IBM Security Directory Server is already installed and configured on the system.
GLPRDB084E
Failed to complete the internal data migration.
GLPRDB085E
Failed to complete the internal data migration for long table names.
GLPRDB086E
Failed to rename the attribute table table name to new table name.
GLPRDB087E
Failed to rename the attribute index index name to new index name.
GLPRDB088E
Entry DN of entry contains an incorrect ACL definition.
GLPRDB089E
The directory server is unable to log on as the database administrator.
GLPRDB090E
Failed to complete the internal data migration for objectclass index.
GLPRDB091W
Attribute attribute name is not indexed but is used in searches number times.
GLPRDB092E
Modifications to object class ibm-pwdGroupAndIndividualPolicies or attribute ibm-pwdGroupAndIndividualEnabled are allowed only for the global password policy entry.
GLPRDB093E
The specified access class access class permission, invalid permission, is not valid. Valid permissions are valid permissions.
GLPRDB098E
Data conversion for encrypted attribute attribute name failed.
GLPRDB101W
Encrypted attribute attribute_name cannot be made unique.
GLPRDB102W
Unique attribute attribute_name cannot be encrypted.
GLPRDB103E
The password policy entry DN of entry referenced by entry DN of entry is not valid.
GLPRDB104E
The DN of the password policy entry DN of entry referenced by entry DN of entry cannot be found.
GLPRDB105E
The password policy entry DN of entry is in use and cannot be renamed or deleted.
GLPRDB106W
The ibm-pwdPolicy attribute in password policy entry DN of entry is set to TRUE, but the ibm-pwdPolicy attribute in the global password policy is set to FALSE. No password policy will be evaluated or enforced.
GLPRDB108E
The creation of a suffix entry DN of suffix failed.
GLPRDB109E
The server does not support automatic creation of a suffix entry using this RDN DN of suffix . An administrator must create the entry before entries can be added under this suffix.
GLPRDB110E
Attribute ibm-pwdPolicyStartTime in entry DN of entry cannot be set to a future time. The value of the attribute is value.
GLPRDB111E
The server is unable to use the username and password combination for the DB2 instance owner in the configuration file to establish a connection to the database.
GLPRDB112E
An attempt to delete entry entry name failed. The return code from creating a tombstone is LDAP return code.
GLPRDB113E
An attempt to delete entry entry name failed. The return code from the delete operation is LDAP return code.
GLPRDB114W
The deleted entry entry name has been restored, but the entry's group membership is not restored.
GLPRDB118E
Failed to update the database configuration for LOGARCHMETH1 for database database to method archive method.
GLPRDB121W
All members of group 'group DN' have been replaced.
GLPRDB122E
The environment variables LDAP_MAXCARD and IBMSLAPD_USE_SELECTIVITY cannot both be set to YES.
GLPRDB131E
Failed to update DB2 statistics for table 'table name' for instance 'instance name' with SQLCODE DB2 sqlcode.
GLPRDB132E
Reading the database for the eid entry id returned null data.
GLPRDB133E
The attribute attr type contains a language tag, but language tags are not enabled.
GLPRDB134E
The maximum filter limit that is set in IDS_MAX_SEARCH_FILTER_LEVEL =max filter exceeded for the assertion control on the host, host, with conn id, conn id and is bound with dn, dn
GLPRDB145E
Invalid replication filter attribute value specified in entry ' entry dn'.
GLPRDB146E
Replication filter value is not specified.
GLPRDB147W
Attribute attribut name is not found in schema.
GLPRPL001E
Unable to connect to replica host name on port port number. Verify that the replica is started.
GLPRPL003W
The DN of the credential entry entry name defined for the replication agreement entry name cannot be found.
GLPRPL004E
The credential entry entry name defined for the replication agreement entry name is not valid.
GLPRPL005E
The credential entry entry name is in use and cannot be deleted.
GLPRPL006E
For the replica group entry entry name, the parent entry must be an ibm-replicationContext entry.
GLPRPL007E
For the replica subentry entry entry name, the parent entry must be an ibm-replicaGroup entry.
GLPRPL008E
For the replication agreement entry DN of entry, the parent entry must be an ibm-replicaSubentry entry.
GLPRPL009E
Master DN and Admin DN cannot be the same.
GLPRPL010E
The consumer URL defined in replication agreement entry entry name is a duplicate.
GLPRPL011E
Initial server startup has not been done.
GLPRPL012W
Server migration in progress; wait for migration to complete. Server migration might take several minutes.
GLPRPL013E
The value of the ibm-slapdMigrationInfo attribute must contain a valid version number and server type.
GLPRPL014E
The schedule DN object entry name cannot be found.
GLPRPL015W
Invalid port port type specified: port number. Port number must be numeric, in the range 1 - 65535. Server starting in configuration only mode on port type port port number.
GLPRPL016E
Internal processing error in server; replication thread cannot start.
GLPRPL019E
Unable to create schedule for replica 'entry name'; all changes will be replicated immediately.
GLPRPL020E
Unable to locate schedule entry with DN 'entry name'.
GLPRPL021E
Error on schedule entry with DN 'entry name' attribute attribute name value 'attribute value'. Value ignored.
GLPRPL022W
Replica 'entry name' missing schedule DN; all changes will be replicated immediately.
GLPRPL023E
Error retrieving pending changes for replica 'entry name'. Will try again.
GLPRPL024E
Error retrieving data for replica 'entry name' change ID change id entry 'entry name' return code 'return code'. Will try again.
GLPRPL025E
Error while removing status entry for replica 'entry name'.
GLPRPL026E
Error while updating status for replica 'entry name' to last change ID change id.
GLPRPL027W
Error while parsing data for change ID change id for replica 'entry name'. Will try again.
GLPRPL032E
Error error string occurred for replica 'entry name': add failed for entry 'entry name' change ID change id.
GLPRPL033E
Error error string occurred for replica 'entry name': modify failed for entry 'entry name' change ID change id.
GLPRPL034E
Error error string occurred for replica 'entry name': rename failed for entry 'entry name' change ID change id.
GLPRPL035E
Error error string occurred for replica 'entry name': delete failed for entry 'entry name' change ID change id.
GLPRPL036E
Error 'error string' occurred for replica 'entry name': bind failed using masterDn 'DN'.
GLPRPL037E
Error error string occurred for replica 'entry name': GSSAPI bind failed using principal name 'DN'.
GLPRPL038E
Error error string occurred for replica 'entry name': EXTERNAL bind failed.
GLPRPL039W
Replication agreement 'entry name' has consumer server ID 'server id', but connected to server with ID 'server id'.
GLPRPL040W
Replication for replica 'replication agreement DN' will continue to retry the same update after receiving an error.
GLPRPL041W
Replication for replica 'replication agreement DN' will continue to the next update after receiving an error.
GLPRPL042W
Replication continuing for replica 'replication agreement DN' after logging update type for entry 'update entry DN' ignoring error: LDAP return code LDAP error description additional error message.
GLPRPL043W
Replication continuing for replica 'replication agreement DN' after skipping update type for entry 'update entry DN' because of error: LDAP return code LDAP error description additional error message.
GLPRPL044E
Server failed to acquire Kerberos credential for the replica 'replication agreement DN'.
GLPRPL045E
Unable to connect to replica host name on port port number. Verify that the replica is started.
GLPRPL046W
The DN of the credential entry credential entry name defined for the replication agreement agreement entry name cannot be found.
GLPRPL047E
The DN of the credential entry credential entry name defined for the replication agreement agreement entry name cannot be found.
GLPRPL048E
The consumer URL defined in replicaAgreement entry name is a duplicate.
GLPRPL049E
The value of the ibm-slapdMigrationInfo attribute must contain a valid version number.
GLPRPL051E
Error error string occurred for replica 'entry name': delete failed for entry 'entry name' change ID change id.
GLPRPL053E
Error retrieving pending change count for replica 'entry name'.
GLPRPL054E
Error while removing status entry for replica 'entry name'.
GLPRPL055E
The schedule DN object entry name cannot be found.
GLPRPL056E
The schedule DN object entry name cannot be found.
GLPRPL057E
The schedule DN object entry name cannot be found.
GLPRPL058E
The schedule DN object entry name cannot be found.
GLPRPL059E
The schedule DN object entry name cannot be found.
GLPRPL060E
Error while updating status for replica 'entry name' to last change ID change id.
GLPRPL061E
Invalid port type port specified: port number. Port number must be numeric, in the range 1 - 65535. Server starting in configuration only mode with port type port port number.
GLPRPL062E
Transaction time limit of time limit exceeded.
GLPRPL063E
Cannot move 'entry DN' from one replication context to another.
GLPRPL064E
The replication configuration could not be read.
GLPRPL065E
The replication configuration DN object entry name cannot be found.
GLPRPL066E
Error on configuration entry with DN 'entry name'; required attribute attribute name is missing.
GLPRPL067E
Error on configuration entry with DN 'entry name' attribute attribute name value 'attribute value'. Value ignored.
GLPRPL068E
Error initializing the log used for replication errors.
GLPRPL070E
Propagation of replication topology entries to host hostname port port number failed with error code rc.
GLPRPL074W
Replication conflict: a modify of 'entry name' was rejected because it had an older timestamp.
GLPRPL075W
Replication conflict: a conflict is detected on a modify operation of DN 'entry name'. The reason for this conflict is because the entry has been modified on this server before the entry was modified on the supplier.
GLPRPL076W
Replication conflict: a conflict is detected on a modify operation of DN 'entry name'. An earlier update on the supplier has not yet been applied to this server.
GLPRPL078W
The extended operation cannot replicate to target server host port port number because the target server does not support replication topology entries.
GLPRPL079E
The extended operation cannot replicate entries to the target server hostname port port number because the target server does not have the suffix suffix.
GLPRPL083W
Replication conflict: re-add of DN 'entry name' to host hostname port port number failed.
GLPRPL084E
Replication conflict: re-add of DN 'entry name' to resolve a conflict will not continue because the entry is too large.
GLPRPL085E
Unable to format a string requiring number of bytes bytes in only numberAvailable bytes.
GLPRPL086E
Attribute 'attribute name' is missing from entry 'entry DN'.
GLPRPL087E
The Replication Topology extended operation failed to quiesce the context entry name on host hostname port port number. The operation will not continue with this server.
GLPRPL089E
The Replication Topology extended operation failed to unquiesce the context entry name on host hostname port port number. The operation will not continue with this server.
GLPRPL091E
The Replication Topology extended operation failed to add a suffix entry name to the configuration file of target host hostname port port number. The operation will not continue with this server.
GLPRPL093E
The Replication Topology extended operation failed to purge the queue that is associated with the replication agreement entry name on host hostname port port number.
GLPRPL095E
The supplier of the Replication Topology extended operation failed to contact target host hostname port port number using replication agreement entry name.
GLPRPL097E
Error initializing or writing to the log used for replication conflict resolution.
GLPRPL098E
The Replication Topology extended operation timed out.
GLPRPL100E
The update logged as a failure with error ID error ID for replication agreement DN 'replication agreement' failed on attempt attempt number with LDAP return code LDAP error text.
GLPRPL103E
Unable to log failure in replication error log for replication agreement DN 'replication agreement for entry with change ID change id.
GLPRPL104W
Reached or exceeded the limit max replication errors for the replication error log for replication agreement DN 'replication agreement'.
GLPRPL105W
Approaching the limit max replication errors for the replication error log for replication agreement DN 'replication agreement'. The current number of logged failures is replication error count.
GLPRPL110E
Replication for DN 'replication agreement' terminated because of an unsupported replication method. method.
GLPRPL111W
Replication for DN 'replication agreement' set to use the limit of max connections for consumer connections.
GLPRPL112W
Replication for DN 'replication agreement' set to use the default number default connections for consumer connections.
GLPRPL113E
Unable to create replication agent on connection connection ID for DN 'replication agreement', replication terminating.
GLPRPL115W
Replication for DN 'replication agreement' encountered a gap in the change IDs: current change ID followed last change ID.
GLPRPL116E
Replication for DN 'replication agreement' encountered a gap in the change IDs: current change ID followed last change ID after trying one more time but is continuing.
GLPRPL117E
Unable to log additional replication failures in replication error log for replication agreement DN 'replication agreement because the number of logged entries exceeds the limit; replication is waiting for the log to be cleared.
GLPRPL118E
Replication for replica 'repl_agmt_dn' will continue to retry the same failed update with change ID change id until it is successful.
GLPRPL119W
Replica 'entry name' will use single-threaded, synchronous replication, instead of the method in the replication agreement.
GLPRPL120E
Error occurred processing the replica URL for replication agreement 'repl_agmt_dn'.
GLPRPL121E
The operation being performed on DN 'dn' is not allowed in a transaction.
GLPRPL124W
Change cannot be replicated because it contains attributes that require a secure connection.
GLPRPL125E
Cannot replicate to consumer because it does not support encrypted attributes. Replica: 'replication agreement'.
GLPRPL126E
Cannot replicate to consumer because it does not support the current password encryption setting. Replica: 'replication agreement'.
GLPRPL127W
Change cannot be replicated because consumer does not support encrypted attributes.
GLPRPL129E
Creation of surrogate entry 'entry name' on partial replica hostname port port number failed.
GLPRPL131W
The replication filter entry filter entry name defined for the replication agreement agreement entry name cannot be found.
GLPRPL132E
The replication filter entry filter entry name defined for the replication agreement agreement entry name cannot be found.
GLPRPL133W
The operational attribute op attr name specified as part of the replication filter inclusion/exclusion list is not allowed.
GLPRPL138W
Consumer server on host host name, port port number, does not support the requested password encryption format.
GLPRPL139E
The filter entry entry name is in use and cannot be deleted.
GLPRPL141W
Consumer server on host host name, port port number, does not support the requested attribute encryption format.
GLPRPL142W
Internal search for the parent entry dn failed.
GLPRPL143E
The attribute attribute name specified in the replication filter is not found in the schema.
GLPRPL144E
The objectclass objectclass name specified in the replication filter is not found in the schema.
GLPRPL145E
Invalid replication filter 'attribute value' specified in entry ' entry dn'.
GLPRPL146W
Replication conflict: modification to 'entry name' was rejected because it has modification timestamp equal to the target entry timestamp.
GLPRPL147E
Cannot replicate to consumer because it does not support SHA2 and Salted SHA2 algorithm families. Replica: 'replication agreement'.
GLPRPL50E
The value of the ibm-slapdMigrationInfo attribute must contain a valid server type.
GLPRUN002E
The idsrunstats tool is unable to run because of initialization error.
GLPRUN004E
Failed to retrieve the list of tables to update index statistics.
GLPRUN007W
Index statistics on table 'tabname' could not be updated at this time.
GLPSCH001E
Data source: file name: line line number: expected Object ID, but could not find it at or before variable.
GLPSCH002E
Data source: file name: line line number: expected one of the following: variables, but could not find it at or before variable.
GLPSCH003E
Data source: file name: line line number: expected digit after '.', but could not find it at or before variable.
GLPSCH004E
Data source: file name: line line number: expected non-empty quoted string, but could not find it at or before variable.
GLPSCH005E
Data source: file name: line line number: expected number after brace, but could not find it at or before variable.
GLPSCH006E
Data source: file name: line line number: expected '}' after '{ <number>', but could not find it at or before variable.
GLPSCH007E
Data source: file name: line line number: expected a quoted string, but could not find it at or before variable.
GLPSCH008E
Data source: file name: line line number: expected a quoted string or open parenthesis, but could not find it at or before variable.
GLPSCH009E
Data source: file name: line line number: expected an LDAP description string, but could not find it at or before variable.
GLPSCH010E
Data source: file name: line line number: expected a quoted LDAP description string, but could not find it at or before variable.
GLPSCH011E
Data source: file name: line line number: expected a quoted LDAP description string or open parenthesis, but could not find it at or before variable.
GLPSCH012E
Data source: file name: line line number: encountered non-terminated quoted string at or before variable.
GLPSCH013E
Data source: file name: line line number: encountered unexpected end of input.
GLPSCH014E
Data source: file name: line line number: input not valid at or before variable.
GLPSCH015E
Data source: file name: line line number: expected usage specification, but could not find it at or before variable.
GLPSCH016E
Data source: file name: line line number: expected one or two quoted strings (database table and/or column names), but could not find them at or before variable.
GLPSCH017E
Data source: file name: line line number: expected ACCESS-CLASS specification, but could not find it at or before variable.
GLPSCH018E
Data source: file name: line line number: variable variable has already been defined.
GLPSCH019E
Data source: file name: line line number: found duplicated definition for variable variable.
GLPSCH020E
Data source: file name: line line number: attribute type variable already has an IBM extended definition.
GLPSCH021E
Data source: file name: line line number: all alternate definitions of same variable must be in a single file. variable is also defined in variable.
GLPSCH022E
Data source: file name: line line number: inconsistent variable, variable and variable (with object ID variable).
GLPSCH023E
Data source: file name: line line number: variable variable does not have a syntax definition.
GLPSCH024E
Operation not valid. Expected one of the following operations: variable.
GLPSCH025E
variable variable not found when processing variable variable.
GLPSCH026E
variable variable does not exist; delete operation failed.
GLPSCH027E
variable variable does not exist; replace operation failed.
GLPSCH028E
variable variable does not have a syntax definition.
GLPSCH029E
Attempt to delete variable failed. The specified object ID object ID and name name do not refer to the same variable.
GLPSCH030E
Attempt to replace variable failed. The specified object ID object ID and name name do not refer to the same variable.
GLPSCH031E
variable variable already exists; add operation failed.
GLPSCH032E
variable variable cannot be deleted. It is still being used.
GLPSCH033E
Missing LDAP V3 specification for variable attribute.
GLPSCH034E
attribute variable and its supertype super have different usages.
GLPSCH035E
Cycle, attribute, detected in supertype specification.
GLPSCH036E
Cycle, class, detected in superclass specification.
GLPSCH037E
entity variable was not provided. Must be provided as quoted string.
GLPSCH038E
entity string must be provided as string, but was provided as string.
GLPSCH039E
string quoted string must be provided as string with inherited properties or IBM extensions string, but was provided as string with inherited properties or IBM extensions string.
GLPSCH040E
The IBM extension for string quoted string must be provided as string, but was provided as string.
GLPSCH041E
Data source: file name: line line number: expected ENCRYPT specification, but could not find it at or before variable.
GLPSCH042E
Data source: file name: line line number: expected RETURN-VALUE specification, but could not find it at or before variable.
GLPSCH043E
Attribute attribute name cannot be encrypted. The server does not support encryption for syntax syntax name.
GLPSCH044E
Attribute attribute name cannot be encrypted.
GLPSCH046W
matching rule type Matching Rule matching rule name for attribute attribute name is not compatible with its syntax syntax name
GLPSCH047E
Password attribute attribute name cannot be encrypted in the schema.
GLPSCH049W
matching rule type Matching Rule matching rule name for attribute attribute name is not consistent with other matching rules defined for this attribute in terms of case-sensitivity handling.
GLPSCH050E
Length attribute length for attribute attribute name is less than the minimum length of 32 for an AES-encrypted value.
GLPSCH052W
Invalid value 'value' set for attribute encryption. Assuming AES256 encryption format.
GLPSRV005E
Server was unable to decode input data from the client (connection ID: connid, IP address: )ip_addr, Port: port) while processing operation: operation.
GLPSRV006E
Unable to open file 'file'. Try specifying the full path name.
GLPSRV007E
Error while trying to allocate memory.
GLPSRV008E
Unable to create necessary thread.
GLPSRV010E
Server unable to start due to attribute dependency check failure.
GLPSRV011E
Server cannot use port port for both SSL and non-SSL.
GLPSRV012E
A primary administrator DN and administrator PW must be specified in the server configuration.
GLPSRV013E
Attempt to initialize administrative connection failed, error value (error string).
GLPSRV014E
An attempt to set a TCP/IP parameter has failed. The operating system returned error error value (error string).
GLPSRV022E
Failed to initialize secure connection from client (connection ID: connid, IP address: ip_addr, Port: port).
GLPSRV027E
Server failed to acquire Kerberos credential.
GLPSRV028E
Mapping from Kerberos principal to LDAP DN failed because more than one krbPrincipalName is found.
GLPSRV029E
SASL GSSAPI bind request from client failed due to a token that is not valid.
GLPSRV030E
Maximum operations per transaction maximum operations exceeded.
GLPSRV031E
Maximum number of transactions maximum transactions exceeded.
GLPSRV032E
Time limit of time limit for a transaction was exceeded and all of the operations in the transaction were rolled back.
GLPSRV036E
Errors were encountered while starting the server; started in configuration only mode.
GLPSRV037E
Failed to change file to file name.
GLPSRV038W
Using default file file name.
GLPSRV039E
Configuration entry: entry DN contains an line that is not valid: entry attribute : attribute value
GLPSRV040E
Server starting in configuration only mode due to errors.
GLPSRV042W
Server responding to a large backlog of requested client operations. There are number of pending requests pending requests.
GLPSRV043W
Server response to the backlog of requested client operations has completed. number of completed requests requests completed.
GLPSRV044W
Client connection from IP address bound as bind DN closed by server.
GLPSRV045W
Automatically closed number of connections idle client connections.
GLPSRV046W
No anonymous binds will be allowed.
GLPSRV047W
Anonymous binds will be allowed.
GLPSRV051W
Anonymous binds will no longer be accepted. Closed number of connections existing anonymous client connections; number of connections will be closed as soon as possible.
GLPSRV052W
Processing unbind request from the directory administrator. Closed number of connections client connections; another number of connections client connections will be closed as soon as possible.
GLPSRV053E
Server unable to respond to the large backlog of client requests.
GLPSRV054E
Unable to enable tracing dynamically.
GLPSRV056E
Server unable to disable tracing dynamically.
GLPSRV058E
Unable to set debug level for server debugging.
GLPSRV059W
Debug level set to debug_output_level.
GLPSRV060E
Unable to set debug output file name for the server.
GLPSRV062E
Attribute attribute name in entry entry name specified the Kerberos ID for an administrator incorrectly.
GLPSRV063E
Unable to complete registration of all supported features.
GLPSRV064E
Failed to initialize plugin name.
GLPSRV065E
Values for the attribute attribute name are not unique. The attribute attribute name was removed from the unique attribute entry: entry name.
GLPSRV066E
DIGEST-MD5 bind attempt failed because the value for the component name component in the response was not valid.
GLPSRV067E
DIGEST-MD5 bind attempt for username was unsuccessful because the username did not match an entry.
GLPSRV068E
DIGEST-MD5 bind attempt for username was unsuccessful because the username matched more than one entry.
GLPSRV069E
DIGEST-MD5 bind attempt was unsuccessful because the response from the client was improperly formatted.
GLPSRV070E
DIGEST-MD5 bind attempt for username was unsuccessful because the password was incorrect.
GLPSRV071E
DIGEST-MD5 bind attempt for username was unsuccessful because the user did not have proxy authority.
GLPSRV072E
Mapping from Kerberos principal to LDAP DN failed because more than one altSecurityIdentities exists.
GLPSRV073E
Attribute attribute name in entry entry name specified the Kerberos ID for an administrator incorrectly.
GLPSRV074E
Attribute attribute name in entry entry name specified the Kerberos ID for an administrator incorrectly.
GLPSRV075E
Bad Administrator Kerberos ID defined in attribute attribute name in entry entry name. The Kerberos ID must start with 'ibm-kn=' or 'ibm-kerberosName='.
GLPSRV076E
Transaction time limit of time limit exceeded. No future operations requested in this transaction are allowed. Transaction rolled back.
GLPSRV077E
Unable to enable tracing at startup.
GLPSRV078W
Server trace enabled.
GLPSRV079E
Unable to set the server debug level at startup.
GLPSRV080W
Server debug level set to debug_output_level.
GLPSRV081E
Unable to set the server debug output file name at startup.
GLPSRV083E
Unable to enable server tracing as requested on the command line.
GLPSRV084W
Trace enabled from command line.
GLPSRV085E
An attempt to set the TCP/IP keep alive option has failed. The operating system returned error error value (error string).
GLPSRV087E
The -a and -n options cannot be used together.
GLPSRV088E
The server is unable to run because of initialization error.
GLPSRV089E
Server unable to start because the server could not write to the slapd.pid file.
GLPSRV090E
Maximum number of operations per transaction, maximum operations, exceeded.
GLPSRV091E
Null based one level search is not supported.
GLPSRV092E
No values for type attribute name.
GLPSRV093E
version number is an unsupported LDAP version.
GLPSRV094E
The value attribute value is not a valid value for attribute ibm-slapdServerBackend. The attribute takes either RDBM or PROXY as its values.
GLPSRV095E
Plugin type plugin type with path plugin path is not supported. Plugin not loaded.
GLPSRV096E
Bind attempt by DN DN and source IP address IP Address was unsuccessful.
GLPSRV097E
Internal processing error in the server; return code return code from pthread library.
GLPSRV099E
Unable to open audit log file 'filename'.
GLPSRV100E
Audit log file 'filename' is full, unable to log any more records.
GLPSRV101E
Problems retrieving entry 'entry DN' in the server configuration.
GLPSRV103E
Found an unknown attribute 'attribute name' in entry 'entry DN'.
GLPSRV106E
Communications error: error string.
GLPSRV114E
Server failed to start normally with SSL; starting in configuration only mode without SSL.
GLPSRV115E
The operator is not in the same primary group as the directory server instance owner 'instance name'. Only users in the same primary group as the directory server instance owner can start a directory server instance.
GLPSRV119E
Failed to create Windows service for directory server instance: 'instance name'.
GLPSRV122E
Failed to stop directory server instance: 'instance name'.
GLPSRV123E
Unable to stop directory server instance 'instance name' because the state of the server cannot be determined.
GLPSRV126E
Failed to delete Windows service for directory server instance: 'instance name'.
GLPSRV127E
The -k and -i options cannot be used together.
GLPSRV128E
The -k and -u options cannot be used together.
GLPSRV129E
The -i and -u options cannot be used together.
GLPSRV131E
The -k and -c options cannot be used together.
GLPSRV132E
The -k and -a options cannot be used together.
GLPSRV133E
The -k and -n options cannot be used together.
GLPSRV135E
A problem was encountered while retrieving server configuration entries for subtree 'subtree DN'.
GLPSRV136E
text
GLPSRV137E
The Administrative Password Policy settings in the server configuration are not valid.
GLPSRV138W
A client connection from IP address bound as bind DN closed by the server.
GLPSRV139W
A client connection from IP address bound as bind DN closed by the server.
GLPSRV140E
An unsupported operation was requested within a transaction. Transaction transaction ID rolled back.
GLPSRV141E
An unsupported operation was requested within a transaction after a prepare transaction extended operation request. Transaction transaction ID rolled back.
GLPSRV142E
An unsupported extended operation was requested within a transaction after a prepare transaction extended operation request. Transaction transaction ID rolled back.
GLPSRV143E
Transaction time limit between prepare and commit or roll back exceeded. Transaction transaction ID rolled back.
GLPSRV144E
Extended operation OID failed, option decimal option is not valid for this request.
GLPSRV145E
The modify request failed because proxy split name is not unique.
GLPSRV146E
The add request failed because proxy split name is not unique.
GLPSRV147W
Connection write time limit exceeded. Connection from IP address bound as bind DN will be closed.
GLPSRV148W
Transaction with ID transaction ID submitted by bind DN will be rolled back due to an error (LDAP error) in an operation.
GLPSRV149E
Ulimit entry entry DN is not present in the server configuration.
GLPSRV150E
Input not valid for option ulimit option.
GLPSRV151E
Prescribed soft limit is out of range or greater than hard limit value for option ulimit option.
GLPSRV153W
The server was not able to accept a requested client connection. The maximum capacity of message has been reached. This error has occurred message times.
GLPSRV154E
A new persistent search request could not be handled by the server.
GLPSRV161W
There are no Administrative Password Policy settings in the server configuration.
GLPSRV162W
Referral 'referral' not valid.
GLPSRV163E
Pass-through bind failed on 'URL' for entry 'bind DN'.
GLPSRV164E
Pass-through bind failed because the attribute 'attribute name' has multiple values in entry 'EntryDN'.
GLPSRV165E
Pass-through authentication failed due to a timeout.
GLPSRV166E
The pass-through search to get mapped DN for the bind DN 'bind DN', returned more than one entry.
GLPSRV167E
Nested subtrees '1st subtree DN' and '2nd subtree DN' found in pass-through authentication configuration.
GLPSRV168E
Attribute mapping is configured for attribute 'attribute name', which is not present in the schema.
GLPSRV169W
Attribute mapping is configured for attribute 'attribute name', which is not present in the schema for pass-through directory server 'URL'.
GLPSRV170E
Attribute name 'attribute name' that is not valid specified in attribute mapping.
GLPSRV171E
Specified attribute mapping 'attribute map' is not valid.
GLPSRV172E
Pass-through attribute mapping is configured for bind DN 'bind DN' but the entry is missing.
GLPSRV173E
Value for attribute 'attribute name' not valid in entry 'entry DN'.
GLPSRV174E
Pass-through subtree 'subtree DN' conflicts with restricted subtree 'restricted subtree DN'.
GLPSRV175W
Unable to check schema of pass-through directory 'URL' for attribute 'attribute name', received return code LDAP return code.
GLPSRV177W
Directory server instance unable to shut down; exiting now.
GLPSRV178E
Internal error while processing plugin type plugin type with path plugin path.
GLPSRV179E
The pass-through URL 'URL' is not valid.
GLPSRV181E
The pass-through authentication bind failed during attribute mapping with rc=rc.
GLPSRV182E
Failed to connect to pass-through directory 'URL'.
GLPSRV183E
Unable to modify log path to 'path' for the 'entry DN'. The file already exists on the system.
GLPSRV184E
Unable to modify log path to 'path' for the 'entry DN'. The 'entry DN' entry is already configured with that log file path.
GLPSRV185E
Unable to modify log path to 'path' for the 'entry DN'. The file cannot be written to.
GLPSRV186W
The proxy server has temporarily suspended reading client requests from the network.
GLPSRV188E
Sort control missing in virtual list view search request.
GLPSRV191E
Terminating server because of initialization errors.
GLPSRV192E
Server is unable to start because the server could not write to the slapd.properties file.
GLPSRV203W
The server has temporarily suspended reading client requests from the network. There are number of writewaiters of number of total workers worker threads attempting to write results.
GLPSRV204W
The server has temporarily suspended reading client requests from the network number of times times. There are number of writewaiters of number of total workers worker threads attempting to write results.
GLPSRV208W
Persistent search is not supported on subtree dn.
GLPSRV209W
Message for support team: additional text.
GLPSRV217W
Invalid value 'value' set for ibm-slapdPwEncryption attribute. Assuming AES256 encryption format.
GLPSRV218E
User provided encrypted string is badly formatted.
GLPSRV224E
No entry matching the search criterion 'value' was found.
GLPSRV225E
Too many entries matching the search criterion 'value' were found.
GLPSRV226E
The maximum filter limit that is set in IDS_MAX_SEARCH_FILTER_LEVEL, max filter exceeded for the search on the host, host with conn id, conn id and is bound with dn=dn
GLPSSL002E
File I/O error on opening SSL key database file key database filename.
GLPSSL003E
Open of SSL key database file key database filename failed.
GLPSSL004E
SSL key database file key database filename is in an unknown format.
GLPSSL005E
The password supplied for key database file key database filename is not correct.
GLPSSL006E
A memory allocation error occurred processing SSL key database file key database filename.
GLPSSL007E
SSL socket initialization failed due to a problem with creating the key pair.
GLPSSL008E
An incorrect label was specified for SSL key database key database filename.
GLPSSL009E
An incorrect value of cipher spec was given for the SSL cipher specification.
GLPSSL010E
No SSL ciphers were specified.
GLPSSL011E
The certificate in the SSL key database file key database filename has expired.
GLPSSL012E
The certificate certificate label in the SSL key database file is not valid.
GLPSSL013E
The certificate is of an unsupported type in the SSL key database file key database filename.
GLPSSL014E
No certificate exists in SSL key database file filename.
GLPSSL015E
The underlying secure socket was closed.
GLPSSL016E
An SSL error of error code was encountered contacting consumer server host name, port port number.
GLPSSL017E
The required SSL shared libraries could not be loaded.
GLPSSL018E
The required SSL shared libraries encountered an internal load error.
GLPSSL019E
The SSL layer has reported an unidentified internal error, SSL extended error code:error code.
GLPSSL020E
The SSL layer has reported a bad parameter.
GLPSSL021E
An attempt has been made to use a domestic key database with an export version of the SSL library.
GLPSSL022E
Secure socket client authentication error occurred.
GLPSSL023W
Attempted to configure server for SSL in a non-SSL version of the product.
GLPSSL024E
Failed to start with SSL. Starting in configuration only mode without SSL.
GLPSSL026E
SSL socket initialization failed due to a problem with creating a handle.
GLPSSL027E
SSL socket initialization failed due to a problem with initializing a handle.
GLPSSL031W
The server is operating in FIPS mode for the SSL layer but not the underlying cryptographic layer.
GLPSSL033E
Unable to load the specified PKCS#11 library library.
GLPSSL034E
A PKCS#11 token token is not present in the slot.
GLPSSL035E
The password/pin to access the PKCS#11 token is not valid.
GLPSSL036E
A PKCS#11 token label token label is not valid.
GLPSSL038W
Unable to start the server in FIPS Mode. Turning off the FIPS Support.
GLPSSL040E
An incorrect value of protocol was given for the security protocol specification.
GLPSSL041E
An incorrect value of mode was given for the Suite B specification.
GLPSSL042E
An incorrect value of sigalg was given for the signature algorithm specification.
GLPUCH004E
Failed to remove change log from directory server instance: 'instance name'.
GLPUCH007E
Failed to unconfigure change log database 'database name' for directory server instance: 'DB2 instance'.
GLPUCH008E
A change log database is not configured for directory server instance 'instance name'.
GLPUCH009E
A database instance is not configured for directory server instance 'instance name'.
GLPUCH010E
Unable to unconfigure the change log. No change log is configured for directory server instance 'instance name'.
GLPUCH012E
An internal error occurred while running the idsucfgchglg command.
GLPUCH013W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPUDB004E
Failed to remove the DB2 database from directory server instance: 'instance name'.
GLPUDB007E
Failed to unconfigure database 'database name' for directory server instance: 'DB2 instance'.
GLPUDB008E
A database is not configured for directory server instance 'instance name'.
GLPUDB009E
Failed to unconfigure local loopback for directory server instance: 'instance name'.
GLPUDB010E
A database is not configured for directory server instance 'instance name'.
GLPUDB011E
A database instance is not configured for directory server instance 'instance name'.
GLPUDB012E
An internal error occurred while running the idsucfgdb command.
GLPUDB013W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPUDB014E
Unable to unconfigure database. No database is configured for directory server instance 'instance name'.
GLPUDB024E
Inactive logs for directory server instance 'instance name' could not be removed from location 'inactive log path'.
GLPUDB025E
The database backup file for directory server instance 'instance name' named 'backup file name' could not be removed.
GLPUSC002E
An internal error occurred while running the idsucfgsch command.
GLPUSC003W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPUSC006E
Failed to remove schema file: 'schemafile'.
GLPUSC008E
The schema file 'schemafile' does not exist in the configuration file of the directory server instance.
GLPUSC009E
Deletion of a system defined schema file 'schemafile' is not allowed.
GLPUSC010E
The -s option is required and is used to specify the name of the schema file to remove.
GLPUSF002E
An internal error occurred while running the idsucfgsuf command.
GLPUSF003W
The program did not complete successfully. View earlier error messages for information about the exact error.
GLPUSF006E
Failed to remove suffix: 'suffix'.
GLPUSF008E
The suffix 'suffix' does not exist in the configuration file of the directory server instance.
GLPUSF009E
Deletion of the system defined suffix 'suffix' is not allowed.
GLPUSF010E
The -s option is required and is used to specify the name of the suffix to remove.
GLPWCO002E
Select an entry.
GLPWCO003E
Cannot connect to the server.
GLPWCO005E
Select a row.
GLPWCO006E
The server is running in configuration only mode. This task cannot be initialized.
GLPWCO008E
A server with the same hostname and port already exists.
GLPWCO009E
The administration port specified is already in use.
GLPWCO010E
Authentication error: Either the user name or password (or both) is incorrect, or the password has expired.
GLPWCO011E
Communications error: Unable to connect to the specified LDAP server.
GLPWCO012E
Login failed: The server is currently unwilling to accept the bind. The specified account might be locked.
GLPWCO013E
LDAP server error: Unable to connect to the specified LDAP server using the existing connection settings.
GLPWCO014E
Internal error: An internal error occurred while trying to authenticate the user.
GLPWCO015E
Parameter error: Either the user name or the password or both were not specified.
GLPWCO016E
Unknown error: Attempted to access this page without all required parameters.
GLPWCO017E
The current user does not have access to this page. Current session might have timed out.
GLPWCO018E
Error: Current password incorrect.
GLPWCO019E
Error: Confirmation password incorrect.
GLPWCO020W
Are you sure you want to delete the selected server?
GLPWCO021E
Unauthorized access. The user is not a console administrator.
GLPWCO022W
The password must be changed before access can be granted to the LDAP data.
GLPWCO023W
The account is locked.
GLPWCO024W
The password was reset and must be changed now.
GLPWCO025W
The password cannot be changed. The user does not have the authority to modify the password.
GLPWCO026W
The current password was not supplied or is not correct.
GLPWCO027W
Incorrect password syntax.
GLPWCO028W
The password is too short.
GLPWCO029W
The current password is not old enough and cannot be changed at this time.
GLPWCO030W
The password specified is incorrect. The password has already been used.
GLPWCO031W
number of binds LDAP binds remain before the account will be locked.
GLPWCO032W
Password will expire after number of seconds seconds.
GLPWCO033E
Connected to administration server. This task cannot be initialized.
GLPWCO034E
Server with the same server name already exists.
GLPWCO035W
Connected to administration server. Not all operations are available.
GLPWCO036E
Incorrect port in Server entry.
GLPWCO037E
Incorrect server entry. Provide the server entry in the following format 'hostname:port'.
GLPWCO038W
Changes made to the schema are not propagated to the back-end servers. For changing the schema of the back-end servers, changes must be made on the back-end servers.
GLPWCO039E
Key database password does not match.
GLPWCO040E
Trust database password does not match.
GLPWCO041E
Insufficient access rights.
GLPWCO042E
Password is required if an ssl key database path is specified.
GLPWCO043E
SSL key database path is required if the password for an ssl key database file is specified.
GLPWCO044E
SSL key database file name is not valid.
GLPWCO045E
Password is required if an trust database path is specified.
GLPWCO046E
Trust database path is required if the password for an trust database file is specified.
GLPWCO047E
Trust database file name is not valid.
GLPWDM001E
An error occurred connecting to server server name: error.
GLPWDM002E
An error occurred while disconnecting from the server server name: error.
GLPWDM003E
An error occurred while adding entry entry DN : error.
GLPWDM004E
An error occurred while deleting the entry DN. The logged in user cannot delete that user's own entry.
GLPWDM005E
An error occurred while deleting entry entry DN: error.
GLPWDM006E
The language tag already exists: tag.
GLPWDM007E
Entry already exists: entry DN.
GLPWDM008E
The user already exists: user DN.
GLPWDM009E
The group already exists: user DN.
GLPWDM010E
Cannot delete non-leaf node entry entry DN.
GLPWDM011E
Missing required attributes on entry entry DN: error.
GLPWDM012E
Error: Entry entry DN does not exist.
GLPWDM013E
The current operation cannot continue.
GLPWDM014E
An error occurred opening the context for server server name: error.
GLPWDM015E
An error occurred while retrieving attributes for entry : error.
GLPWDM016E
An error occurred setting attributes for entry : error.
GLPWDM017E
Editing RDN entry entry DN failed.
GLPWDM018E
An error occurred renaming entry entry DN: error.
GLPWDM019E
The context was null on entry entry DN.
GLPWDM020E
An error occurred while performing a search operation on the directory server.
GLPWDM022E
An error occurred while retrieving attributes for the rootDSE search on server server name: error
GLPWDM023E
Unable to read any naming context from the directory server.
GLPWDM024E
Unable to read any subschemaSubentry from the directory server.
GLPWDM026E
An error occurred searching server server name: error.
GLPWDM027E
An error occurred while browsing search results for server server name: error.
GLPWDM028W
An error occurred while retrieving entries. The server does not support paging, sorting, or both. Displaying the first number entries: error.
GLPWDM029E
The search base DN entry DN does not exist.
GLPWDM030E
Encountered unknown attribute: attribute ID.
GLPWDM032E
Incorrect input ACL DN.
GLPWDM033E
Error: incorrect input ACL DN details.
GLPWDM035W
Are you sure you want to delete the entry : entry?
GLPWDM036W
Are you sure you want to delete the selected static group DN?
GLPWDM037W
Are you sure you want to delete the selected member?
GLPWDM038W
Are you sure you want to delete the selected entry : Entry DN ?
GLPWDM039W
Are you sure you want to delete the selected non-leaf node and all its children : Entry DN ?
GLPWDM041E
A leaf node cannot be expanded.
GLPWDM042E
Incorrect group name.
GLPWDM043E
Select an attribute from the Available attributes list to add to the Selected required attributes list.
GLPWDM044E
Select an attribute to be removed from the Selected required attributes list.
GLPWDM045E
Select an attribute from the Selected required attributes list to move it to the Selected optional attributes list.
GLPWDM046E
Select an attribute from the Available attributes list to add to the Selected optional attributes list.
GLPWDM047E
Select an attribute to be removed from the Selected optional attributes list.
GLPWDM048E
Select an attribute from the Selected optional attributes list to move it to the Selected required attributes list.
GLPWDM049E
Collapse operation cannot occur. The top-level entries are already displayed.
GLPWDM050E
No auxiliary object classes are available to be deleted.
GLPWDM051E
Not a valid user.
GLPWDM052W
Are you sure you want to delete the selected auxiliary object classes ?
GLPWDM053E
Cannot read all ACL information. Contact the directory server administrator to check the ACLs for this entry.
GLPWDM054E
Cannot read all Owner information. Contact the directory server administrator to check the owners on this entry.
GLPWDM055E
The syntax of the language tag is incorrect.
GLPWDM056E
Enter a search condition.
GLPWDM057E
Enter a search condition.
GLPWDM058E
This value already exists. Add a different value.
GLPWDM059E
No value was specified for the Value field.
GLPWDM060E
No value is specified for the Subject DN field on the Owners panel.
GLPWDM061E
No value is specified for the Group DN field on the Static memberships panel.
GLPWDM062E
No value is specified for the attribute to be added on the Enter multiple values panel.
GLPWDM063E
No value is specified for the given attribute in the Value field on the Language tag values panel.
GLPWDM064E
No value is specified for the Nested group DN field on the Nested groups panel.
GLPWDM065E
No value is specified for the member field of Static group members panel.
GLPWDM066E
No value is specified for the uniqueMember field on the Static group members panel.
GLPWDM067E
All fields on the Required attributes page are required.
GLPWDM068E
The RDN must be provided.
GLPWDM069E
Select at least one auxiliary object class for deletion.
GLPWDM070E
All the users under the realm are already members of the selected group. No more users can be added to this group.
GLPWDM071E
ACLs cannot be edited for entries under cn=configuration
GLPWDM072E
The DN Subject DN is not valid for the type Subject Type.
GLPWDM073E
The current server data will be loaded. However, there are pending changes that are not yet saved in the current group memberships table of the Static memberships panel. Do you want to make these changes?
GLPWDM074E
The current server data will be loaded. However, there are pending changes that are not yet saved in the static group members table of the Static group members panel. Do you want to retain these changes?
GLPWDM075E
The current server data will be loaded. However, there are pending changes that are not yet saved in the unique members table of Static group members panel. Do you want to retain these changes?
GLPWDM076E
The selected entry is not a group. This option is not valid. Select a group entry or make this entry a group by adding appropriate auxiliary classes.
GLPWDM077E
Incorrect DN entry. Specify a valid DN.
GLPWDM078W
The directory server entries have not been loaded into the table. Only the user changes will be removed from the table. Are you sure you want to remove all the entries in the table?
GLPWDM079E
Cannot remove a MUST attribute: attribute name
GLPWDM080E
Are you sure you want to remove all the table entries?
GLPWDM081E
Possible duplicate value(s) exist for attribute name attribute on the server: server name
GLPWDM082E
One or more of the entries selected in the table already exist and will be ignored.
GLPWDM083E
The value entered is not a valid static group DN. Specify a valid static group entry.
GLPWDM084E
An error occurred in the Referral panel while retrieving the list of attributes from the directory server.
GLPWDM085E
Incorrect Base DN.
GLPWDM086E
Malformed referral URL.
GLPWDM087E
Date format is incorrect. Provide the date value in date format format for column ''column''.
GLPWDM088W
Are you sure you want to delete the selected binary data entry?
GLPWDM089E
File cannot be uploaded on Web server or file not found.
GLPWDM091E
Select a binary data entry to delete.
GLPWDM092E
Select only one binary data entry to export.
GLPWDM096W
Are you sure you want to remove all the encrypted attributes?
GLPWDM097E
Not a valid realm location. The Parent DN field value is not allowed.
GLPWDM099E
Not a valid template location. The Parent DN field value is not allowed.
GLPWDM100E
A template or entry with the same name already exists in the specified location.
GLPWDM101E
Incorrect administrator group container location.
GLPWDM102E
Incorrect user container location.
GLPWDM103E
Not a valid group container location.
GLPWDM104E
This template is in use by one or more realms and cannot be deleted.
GLPWDM105E
The specified administrator group is not a group.
GLPWDM106E
The selected tab name tab cannot be moved.
GLPWDM107E
The selected tab cannot be moved down because the tab is already at the bottom of the list.
GLPWDM108E
A tab with this name already exists.
GLPWDM109E
The tab name cannot be renamed. A tab with this name already exists.
GLPWDM110W
Are you sure you want to delete the selected tab?
GLPWDM111E
The tabs NOT_DISPLAYED and REQUIRED cannot be deleted.
GLPWDM112E
All required attributes must be on a displayed tab.
GLPWDM113E
No naming attribute was found in the selected object classes. Select object classes with at least one naming attribute.
GLPWDM114E
There is no template associated with this realm
GLPWDM115E
An error occurred while adding the user to the group.
GLPWDM116E
An error occurred while removing the user from the group.
GLPWDM117E
No realms were found. Add a realm and then access the selected panel.
GLPWDM119E
Some of the changes could not be saved.
GLPWDM120W
The entry entry DN has been successfully added. Would you like to add a similar entry?
GLPWDM121E
Select an object class.
GLPWDM122E
No value was specified for the Value field.
GLPWDM124E
Select a role for the administrative group member.
GLPWDM125E
Member member does not exist in the Directory Information Tree (DIT).
GLPWDM126W
Not all values are fetched for this entry. Displaying number of values fetched of total number of values total values.
GLPWDM127E
Incorrect search filter filter for users in the realm realm name : error message.
GLPWDM128E
Illegal combination for the attribute.
GLPWDM129E
Are you sure you want to delete selected ACL objects ?
GLPWRM001E
Select a node in the tree.
GLPWRM002E
Failed to suspend replication for selected replication agreement.
GLPWRM003E
Failed to resume replication for selected replication agreement.
GLPWRM004E
Failed to force replication for selected replication agreement.
GLPWRM005E
Failed to skip the blocking unreplicated change for the selected replication agreement.
GLPWRM006E
Failed to skip all unreplicated changes for selected replication agreement.
GLPWRM008E
Failed to configure subtree as a replication context.
GLPWRM009E
Failed to modify the selected replication context.
GLPWRM010E
Unable to add the default group under the replicated subtree.
GLPWRM011E
Connected to administration server. Replication management cannot function in this mode.
GLPWRM012E
Unable to add the subentry: subentry.
GLPWRM013E
Unable to delete the subentry: subentry.
GLPWRM014E
Unable to add the agreement: agreement name.
GLPWRM015E
Unable to edit the agreement: agreement name.
GLPWRM016E
Unable to delete the agreement: agreement name.
GLPWRM017E
Unable to add the daily schedule: schedule name.
GLPWRM018E
Unable to edit the daily schedule: schedule name.
GLPWRM019E
Unable to copy the daily schedule: schedule name.
GLPWRM020E
Server is running in configuration only mode. Replication management cannot function in this mode.
GLPWRM021E
Unable to add the weekly schedule: schedule name.
GLPWRM022E
Unable to edit the weekly schedule: schedule name.
GLPWRM023E
Unable to delete the replication filter object.
GLPWRM024E
Unable to edit the replication filter object.
GLPWRM025E
Unable to retrieve the suffixes from the server.
GLPWRM026E
Unable to get the list of available daily schedules from the server.
GLPWRM027E
Unable to retrieve the list of available weekly schedules from the server.
GLPWRM028E
Unable to get the list of available credentials from the server.
GLPWRM029E
Unable to get the server ID of the server you are connected to.
GLPWRM030E
Unable to get the server ID of the replica server.
GLPWRM031E
Unable to get server ID of the master server. A valid server ID must be provided for a peer master topology to work.
GLPWRM032E
Unable to get the hostname of the server.
GLPWRM033E
Unable to add the ibm-slapdSupplier credential object.
GLPWRM034E
Unable to modify the ibm-slapdSupplier credential object.
GLPWRM035E
Unable to delete the ibm-slapdSupplier credential object.
GLPWRM036E
Unable to add the ibm-slapdReplication credential object.
GLPWRM037E
Unable to modify the ibm-slapdReplication credential object.
GLPWRM038E
Unable to delete the ibm-slapdReplication credential object.
GLPWRM039E
Unable to add the simple credential.
GLPWRM040E
Unable to add the replication filter object.
GLPWRM041E
Unable to modify the simple credential.
GLPWRM042E
Unable to add the Kerberos credential.
GLPWRM043E
Unable to modify the Kerberos credential.
GLPWRM044E
Unable to add the SSL credential.
GLPWRM045E
Unable to modify the SSL credential.
GLPWRM046E
Unable to delete the credential object.
GLPWRM047E
Unable to add the container object under localhost.
GLPWRM048E
Unable to quiesce the subtree.
GLPWRM049E
Unable to unquiesce the subtree.
GLPWRM050E
Unable to get the credential object from the server.
GLPWRM051E
Error in retrieving the enabled capabilities from the root DSE.
GLPWRM052E
Unable to get the values from cn=replication, cn=configuration.
GLPWRM053E
Unable to set the values in cn=replication, cn=configuration.
GLPWRM054E
Unable to search for the replication container object under localhost.
GLPWRM055E
Unable to search for the default group under the replicated subtree.
GLPWRM056E
Unable to search for the replicated subtrees under the suffixes.
GLPWRM057E
Unable to convert the string to name.
GLPWRM058E
Unable to search for the master credential object.
GLPWRM059E
Unable to search for the supplier credential objects.
GLPWRM060E
Unable to search the directory.
GLPWRM061E
Daily schedule daily schedule name has been deleted.
GLPWRM062E
The selected string is not a schedule.
GLPWRM063E
The cascading replication extended operation failed.
GLPWRM064E
Server server name reported an error from server server name. The logged-in user does not have authority to perform this operation.
GLPWRM065E
error message replica details agreement DN details
GLPWRM066E
Replication context is already in the requested state.
GLPWRM067E
The specified change is not the next change to replicate. The server might already have replicated this change.
GLPWRM068E
Server server name reported an error from server server name. Operation did not complete within the specified time.
GLPWRM069E
Replication from supplier replica supplier replica to consumer replica consumer replica did not complete.
GLPWRM070E
Server server name reported an error from server server name. Operation failed with result code result code.
GLPWRM071E
'Create missing parent entries' will only be considered when replication filter DN is specified.
GLPWRM072E
Error occurred on the agreement to server server name.
GLPWRM073E
Unable to add the container object under IBMpolicies.
GLPWRM074E
Unable to search for the replication container object under IBMpolicies.
GLPWRM075E
Entry already exists in the list.
GLPWRM076E
Error occurred setting the gateway and master servers.
GLPWRM078E
Master DN cannot be the same as the administrator DN.
GLPWRM079E
Replication error control extended operation failed.
GLPWRM080E
Schedule does not exist or was deleted.
GLPWRM081E
Failed to create topology on consumer consumer name. Synchronize the topology on the new server. Refer to the IBM Security Directory Server Installation and Configuration Guide for instructions.
GLPWRM082E
Failed to create supplier credentials on consumer consumer name. The supplier credentials must be created on the consumer for replication to work. Refer to the IBM Security Directory Server Administration Guide for instructions.
GLPWRM083E
Failed to connect to consumer server consumer name.
GLPWRM084E
Failed to start consumer server consumer name.
GLPWRM085E
Cannot connect to administration server.
GLPWRM086E
Failed to restart to consumer server server name.
GLPWRM088E
The server server name is a proxy server. A proxy server cannot be added to the replication topology
GLPWRM089E
Cannot move source server because there are agreements associated with it.
GLPWRM090E
The requested operation cannot be performed. The server being promoted is already a master server.
GLPWRM091E
The requested operation cannot be performed. The old and new suppliers cannot both be master servers.
GLPWRM092E
Cannot connect to server. The manage topology function must connect to the server being promoted to perform this operation.
GLPWRM093E
The selected node cannot be deleted.
GLPWRM094W
Consumer server server name must be restarted for the supplier credential to take effect. Do you want to restart the server?
GLPWRM095E
Cannot edit the ACL for this subtree. One can only edit the ACL on a server that is a master server for this subtree.
GLPWRM096E
The selected node cannot be moved.
GLPWRM097E
Cannot delete a node that has agreements under it.
GLPWRM098E
The selected node cannot be edited.
GLPWRM099E
Hostname or port not provided.
GLPWRM100E
Referral LDAP URL not valid.
GLPWRM101E
Cannot delete this subtree. There are non-empty ibm-replicaGroup objects under this replication context.
GLPWRM102E
The entry does not exist or the logged-in user does not have sufficient authority to perform this operation.
GLPWRM103E
No credential selected to edit.
GLPWRM104E
No credential selected.
GLPWRM105E
Cannot create replicated subtree at subtree DN. Access control is not defined properly for this entry.
GLPWRM106E
Failed to promote a replica under a master server. There is no replica subentry corresponding to the server to which the Web Administration Tool is connected.
GLPWRM107E
Agreement agreement name does not have a valid replica ID defined. First set the replica ID in all agreements supplying agreement name. If there are multiple masters, it might be necessary to change this agreement under each master.
GLPWRM108E
Cannot promote server to master. The server being promoted must be a leaf replica with no subordinate replicas.
GLPWRM109E
This server cannot be promoted to a master server.
GLPWRM110E
The source server and the destination server are the same. Select a different destination server.
GLPWRM111E
Unable to delete the subtree
GLPWRM112E
Unable to get ACL information.
GLPWRM113E
The time selected has already been scheduled.
GLPWRM114E
Select a subtree.
GLPWRM115E
Select an entry in the table to remove.
GLPWRM116E
Unable to add schedule. The schedule object schedule object name already exists.
GLPWRM117E
Master DN cannot be the same as the administrator DN.
GLPWRM118E
Default credential has already been deleted.
GLPWRM119E
Passwords do not match.
GLPWRM120E
Select an entry in the list.
GLPWRM121E
The subtree subtree DN already has a supplier object associated with it. Choose a different replicated subtree.
GLPWRM122E
Replica bind DN is a required field.
GLPWRM123E
Bind password is a required field.
GLPWRM124E
This subtree was originally created as a non-replicated subtree. To create credentials in this subtree, the subtree must be initialized for replication with this server as the master. Click OK to initialize the subtree.
GLPWRM125E
Confirm password is a required field.
GLPWRM126E
Passwords do not match.
GLPWRM127E
Simple bind credential details not specified.
GLPWRM128E
Credential not selected.
GLPWRM129E
Select a replication filter.
GLPWRM130E
Unable to add the credential. The credential object credential object name already exists.
GLPWRM131E
Unable to add the replication filter. The filter object filter object name already exists.
GLPWRM132E
Select at least one object class or select the check box to include all object classes.
GLPWRM133E
Select at least one attribute or select the check box to include all attributes.
GLPWRM134W
You have requested to skip all unreplicated changes for this agreement.Click OK to continue with this request, or click Cancel.
GLPWRM136W
Are you sure you want to delete the selected node node names from the topology ?
GLPWRM137W
Warning: All the agreements under the selected master will be deleted. Are you sure you want to continue?
GLPWRM138W
This subtree is a non-replicated subtree. To edit ACLs for this subtree, the subtree must be initialized for replication with this server as the master. Click OK to continue.
GLPWRM139W
The current server to which you are connected to will become a master for this subtree. Are you sure you want to continue?
GLPWRM140W
If you cancel this request, the new server will not be added to the topology. Are you sure you want to cancel?
GLPWRM141W
If you cancel this request, the move operation will not be completed. Are you sure you want to cancel?
GLPWRM142W
Are you sure you want to quiesce the subtree subtree DN?
GLPWRM143W
Are you sure you want to delete the subtree subtree DN?
GLPWRM144W
Are you sure you want to unquiesce the subtree subtree DN?
GLPWRM145W
Are you sure you want to delete this daily schedule?
GLPWRM146W
Are you sure you want to delete this weekly schedule?
GLPWRM147W
Are you sure you want to remove this entry?
GLPWRM148W
Are you sure you want to delete the selected credential object?
GLPWRM149W
Are you sure you want to delete this replication filter object?
GLPWRM156E
The selected node is neither a master nor a gateway. Select a master or gateway node and then click View server.
GLPWRM165E
The selected node is neither a master nor a gateway. Select a master or gateway node and then click View schedule.
GLPWRM168E
Incorrect DN: DN.
GLPWRM904E
This subtree was originally created as a non-replicated subtree. To create replication filters in this subtree, the subtree must be initialized for replication with this server as the master. Click OK to initialize the subtree.
GLPWRM9838W
Warning: This will only delete the agreement agreement with the selected supplier.If this node consumes changes from other suppliers, you must delete each of those agreements separately in order to completely remove it from the topology.
GLPWRP001E
Ran wrapper script on an unsupported operating system: OS
GLPWRP002E
The program program name is not installed or could not be found.
GLPWRP003E
The java command at location is not installed or could not be found.
GLPWRP004W
Could not remove oldest archived core file because write access is needed for: filename.
GLPWRP006E
The DB2 property file 'filename' is not available.
GLPWRP007E
The instance instance is not created or could not be found.
GLPWRP008E
The instance instance is either not a TDS version version instance or it does not exist.
GLPWRP009E
The instance type (PROXY or RDBM) for instance instance was not found.
GLPWRP010E
The executable 'progname' cannot be used on the PROXY server instance 'instance'.
GLPWRP011E
The executable progname cannot be used on the default PROXY server instance instance.
GLPWRP012E
An invalid file name was specified.
GLPWRP013E
DB2 versions prior to 9.1 are not supported.
GLPWRP014E
A supported version of IBM DB2 is not installed on the system, or the ldapdb.properties file does not contain information about the supported IBM DB2 version.
GLPWSA004E
Some of the changes could not be saved.
GLPWSA005E
Cannot connect to administration server.
GLPWSA006E
The confirmation password for simple bind is incorrect.
GLPWSA009E
Passwords do not match.
GLPWSA010E
The confirmation password is incorrect on the certificate revocation panel.
GLPWSA011E
The Certificate revocation list DN was not created. The input value might be incorrect.
GLPWSA012E
The Kerberos DN was not created. The value provided might be incorrect.
GLPWSA015E
Incorrect Directory Server administrator DN syntax.
GLPWSA016E
Incorrect Directory Server administrator DN.
GLPWSA017E
Incorrect Kerberos ID.
GLPWSA018E
Incorrect syntax for Kerberos ID.
GLPWSA019E
Incorrect prefix for Kerberos DN.
GLPWSA020E
Passwords do not match. Some changes were saved.
GLPWSA021E
PKCS#11 interface support is enabled. All fields must be completed and you must select either the key storage or the accelerator mode option or both. Some of the changes were saved.
GLPWSA022E
Passwords do not match. Some changes were saved and will take effect after the server is restarted.
GLPWSA023E
PKCS#11 interface support is enabled. All fields must be completed and you must select either the key storage or the accelerator mode option or both. Some of the changes were saved and will take effect after the server is restarted.
GLPWSA024E
PKCS#11 interface support is enabled. All fields must be completed and you must select either the key storage or the accelerator mode option or both.
GLPWSA025W
Are you sure you want to delete the selected administrative group member DN?
GLPWSA026W
Are you sure you want to delete the selected suffix DN?
GLPWSA027E
Current password is incorrect.
GLPWSA028E
Secure port and unsecure port cannot have the same value.
GLPWSA031E
The administrator DN value already exists.
GLPWSA032E
The selected available attribute already exists under cn=localhost.
GLPWSA033E
The selected available attribute already exists under cn=IBMpolicies.
GLPWSA034E
The selected available attribute already exists in the list of cached attributes under database.
GLPWSA035E
The selected available attribute already exists in the list of cached attributes under changelog.
GLPWSA036E
This suffix DN value already exists.
GLPWSA037W
Are you sure you want to clear the log file?
GLPWSA038E
Select at least one DN or IP address to disconnect.
GLPWSA039W
Are you sure you want to disconnect all connections?
GLPWSA040E
Failed to either add or edit password policy object.
GLPWSA041E
The specified administrator DN already exists. Specify a new administrator DN.
GLPWSA042E
Type a valid value for the server realm in the Digest-MD5 panel.
GLPWSA043E
Type a valid value for the Username attribute in the Digest-MD5 panel.
GLPWSA044W
Are you sure you want to delete the selected back-end directory servers?
GLPWSA045W
Are you sure you want to delete all back-end directory servers?
GLPWSA046E
Passwords do not match.
GLPWSA050E
An error occurred while editing a back-end directory server.
GLPWSA051E
An error occurred while adding the back-end directory server.
GLPWSA052E
An error occurred while deleting back-end directory servers.
GLPWSA053E
An error occurred while loading back-end directory server information.
GLPWSA054E
Kerberos is not enabled for the proxy server.
GLPWSA055E
Incorrect suffix DN.
GLPWSA056E
Incorrect DN specified for displaying entry details.
GLPWSA057E
Incorrect DN specified as partition base DN, while adding a split.
GLPWSA058E
Incorrect DN specified for the bind DN.
GLPWSA059E
Select a referral entry to remove from the table.
GLPWSA060E
Select a suffix DN entry to remove from the table.
GLPWSA061E
Select a suffix DN entry in the table to edit.
GLPWSA062E
No partition entry is selected. Select an entry in the partition entries table to display the associated servers.
GLPWSA063E
No partition base DN entry is selected. Select the partition base DN entry in the table for which you want to perform the resume role operation.
GLPWSA064E
No back-end directory server entry is selected. Select the back-end directory server entry in the table for which you want to perform the resume role operation.
GLPWSA065E
No partition base DN entry is selected. Select the partition base DN entry you want to delete.
GLPWSA066E
No partition base DN entry is selected. Select the entry in the table for the partition base DN to edit.
GLPWSA067E
No back-end directory server entry is selected. Select the back-end directory server entry to delete.
GLPWSA068E
No back-end directory server entry is selected. Select the entry in the table for the back-end directory server to edit.
GLPWSA069E
No back-end directory server entry is selected. Select a back-end directory server entry in the table for which you want to view the corresponding partition bases.
GLPWSA070E
Suffix DN value is incorrect. Type a valid DN.
GLPWSA071W
Are you sure you want to delete the selected back-end directory server split entry?
GLPWSA072W
Are you sure you want to delete the selected partition base DN entry?
GLPWSA073W
Are you sure you want to delete all the back-end directory server splits?
GLPWSA074E
Incorrect partition index value. Partition index value is more than the number of partitions.
GLPWSA075E
Incorrect number of partitions. There exists a partition index value greater than the specified number of partitions.
GLPWSA076E
The specified back-end directory server entry already exists.
GLPWSA077E
The specified partition base already exists.
GLPWSA078E
The specified suffix DN already exists.
GLPWSA079E
An error occurred.
GLPWSA080E
An error occurred while adding the partition base.
GLPWSA081E
An error occurred while editing the partition base.
GLPWSA082E
An error occurred while deleting the partition base.
GLPWSA084E
Resume role extended operation failed because the selected back-end directory server does not exist.
GLPWSA086E
The format of the split name is incorrect.
GLPWSA088E
Type a valid entry DN to search.
GLPWSA089E
You clicked 'Select a file containing multiple DN'. Type the name of a file containing multiple DNs, or select a file using the Browse button, and then click Submit to submit the file on the Web server. Then click Show entry details.
GLPWSA090E
File cannot be uploaded on Web server or file not found.
GLPWSA093E
Error retrieving information for entry: DN
GLPWSA094E
Error retrieving information for the following entries: DNs
GLPWSA104E
Select a role.
GLPWSA105W
Connected to administration server. Not all values are available.
GLPWSA106E
Select an administration group member DN from the table.
GLPWSA108E
You have selected a subtree that is not a suffix. Parent entries for this subtree will not be available for pass-through authentication. Do you want to continue ?
GLPWSA109E
Incorrect port.
GLPWSA110E
Specify the Subtree DN.
GLPWSA111E
Cannot connect to Pass-through server.
GLPWSA112E
Entries under suffixes 'cn=configuration', 'cn=schema', 'cn=pwdpolicy,cn=ibmpolicies', 'cn=changelog', and 'cn=localhost' cannot be configured for pass-through authentication.
GLPWSA113E
Another subtree under this suffix is already configured for pass-through authentication. Select a subtree in a different suffix.
GLPWSA114E
Password policy rule violated. Verify the input given.
GLPWSA115E
Subtree DN is not specified.
GLPWSA116W
Do you want to remove the selected subtree DN?
GLPWSA117W
Do you want to remove the configured subtree?
GLPWSA118E
The number of registrations per connection cannot be more than the total registrations.
GLPWSA119W
Select only one back-end directory server to edit.
GLPWSA120W
Select only one back-end directory server to view partition bases.
GLPWSA121E
The number of database connections for replication cannot exceed the total number of database connections.
GLPWSA122E
Failed to enable / disable multiple password policy.
GLPWSA123E
Global password policy object cannot be deleted.
GLPWSA124E
Failed to delete the password policy object.
GLPWSA125E
Select a role for the administrative group member.
GLPWSA126W
Are you sure you want to delete the selected proxy server group DN entry?
GLPWSA130E
Selected back-end directory server list is empty.
GLPWSA132E
Error performing operation.
GLPWSA133E
Password policy object with the name policy name already exists.
GLPWSA134E
Password policy object policy name is in use by some user or group and it cannot be deleted.
GLPWSA135W
Are you sure you want to delete the selected password policy object?
GLPWSA136W
Are you sure you want to change the number of partition for the split?
GLPWSA137E
A parent node or a child node of the specified suffix DN value already exists. The specified suffix DN value cannot be added.
GLPWSA138E
The number of elements from a single search that can be added to the search filter cache should not exceed the number of elements in a search filter cache.
GLPWSA150E
The backup/restore directory path specified is invalid.
GLPWSA155E
The backup/restore directory path is not specified.
GLPWSA156E
The value of password monitoring interval is out of range.
GLPWSA157W
Are you sure you want to delete the selected referral/s?
GLPWSA847E
Failed to start the server.
GLPWSA848E
Failed to stop the server.
GLPWSA849E
Failed to restart the server.

Parent topic: Messages