Fix Readme
Abstract
IBM MQ provides regular updates containing new function and fixes. The following is a complete listing of available fixes for IBM MQ 9.2.x, with the most recent release at the top.
Content
| Release Date | Total APARs | Security APARs | HIPER APARs | |
| IBM MQ 9.2.5.8 Appliance CSU | 28 June 2023 | 4 | 3 | 0 |
| IBM MQ 9.2.5.7 Appliance CSU | 27 April 2023 | 4 | 3 | 0 |
| IBM MQ 9.2.5.6 Appliance CSU | 28 February 2023 | 1 | 0 | 0 |
| IBM MQ 9.2.5 Appliance CSU04 | 21 December 2022 | 6 | 5 | 0 |
| IBM MQ 9.2.5 Appliance CSU03A | 26 October 2022 | 6 | 4 | 0 |
| IBM MQ 9.2.5 Appliance CSU02 | 19 August 2022 | 3 | 3 | 0 |
| IBM MQ 9.2.5 Appliance CSU01 | 07 July 2022 | 9 | 9 | 0 |
| IBM MQ 9.2.5 | 24 Feb 2022 | 83 | 9 | 12 |
| IBM MQ 9.2.4 | 18 Nov 2021 | 56 | 8 | 7 |
| IBM MQ 9.2.3 | 22 July 2021 | 56 | 5 | 3 |
| IBM MQ 9.2.2 | 25 March 2021 | 53 | 3 | 5 |
| IBM MQ 9.2.1 | 3 December 2020 | 65 | 6 | 2 |
| IBM MQ 9.2.0 | 23 July 2020 | 59 | 6 | 3 |
To download IBM MQ Fix and Refresh Packs follow this link. http://www.ibm.com/support/docview.wss?uid=swg27006037
Vulnerability risk information for IBM MQ can be found at Security Bulletin for WebSphere MQ
Example table
| Security APAR | HIPER APAR | APAR |
Description
|
|
| ✓ | AB12345 |
CVE-XXXX-XXXXX (security/integrity exposure) [CVSS base score 3.3]
|
An example of a Security APAR | |
| ✓ | ZY98765 |
Dummy description for dummy APAR
|
An example of a HIPER APAR |
IBM MQ 9.2.5.8 Appliance Cumulative security update
(Last modified: June 2023)
IBM MQ Appliance 9.2.5 firmware security patches and fixes will be made available until the end of support of IBM MQ Appliance M2001, scheduled for July 10, 2023. For more information, see Withdrawal Announcement LP18-0336, dated July 10, 2018.
These security patches and fixes are available as a cumulative security update on the IBM MQ Appliance 9.2.5 firmware only. Cumulative security update 9.2.5.8 is available from IBM Fix Central Cumulative Security Update for IBM MQ Appliance 9.2.5. As a cumulative update, this update also includes fixes listed below for previous 9.2.5 cumulative security updates.
Fixes included in 9.2.5.8:
| Security APAR | HIPER APAR | APAR | Description |
| ✓ | IT42945 | IBM MQ Appliance CVE-2023-28513 [CVSS base score 5.9] | |
| IT43327 | Thirdparty component updates for cumulative security update 9.2.5.8 | ||
| ✓ | IT43717 | IBM MQ Appliance CVE-2023-24998 [CVSS base score 7.5] | |
| ✓ | IT43802 | IBM MQ Appliance CVE-2023-32342 [CVSS base score 7.5] |
IBM MQ 9.2.5.7 Appliance Cumulative security update
(Last modified: April 2023)
IBM MQ Appliance 9.2.5 firmware security patches and fixes will be made available until the end of support of IBM MQ Appliance M2001, scheduled for July 10, 2023. For more information, see Withdrawal Announcement LP18-0336, dated July 10, 2018.
These security patches and fixes are available as a cumulative security update on the IBM MQ Appliance 9.2.5 firmware only. Cumulative security update 9.2.5.7 is available from IBM Fix Central Cumulative Security Update for IBM MQ Appliance 9.2.5. As a cumulative update, this update also includes fixes listed below for previous 9.2.5 cumulative security updates.
Fixes included in 9.2.5.7:
| Security APAR | HIPER APAR | APAR | Description |
| ✓ | IT42674 | IBM MQ Appliance CVE-2022-43919 [CVSS base score 5.3] | |
| ✓ | IT43177 | IBM MQ Appliance CVE-2022-4304, CVE-2023-0215, CVE-2023-0286, CVE-2022-4450 [CVSS base scores 7.5 - 8.2] | |
| IT43319 | Third party component updates for cumulative security update 9.2.5.7 | ||
| ✓ | IT43381 | IBM MQ Appliance CVE-2023-26285 [CVSS base score 5.9] |
IBM MQ 9.2.5.6 Appliance Cumulative security update
(Last modified: February 2023)
IBM MQ Appliance 9.2.5 firmware security patches and fixes will be made available until the end of support of IBM MQ Appliance M2001, scheduled for July 10, 2023. For more information, see Withdrawal Announcement LP18-0336, dated July 10, 2018.
These security patches and fixes are available as a cumulative security update on the IBM MQ Appliance 9.2.5 firmware only. Cumulative security update 9.2.5.6 is available from IBM Fix Central Cumulative Security Update for IBM MQ Appliance 9.2.5. As a cumulative update, this update also includes fixes listed below for previous 9.2.5 cumulative security updates.
Fixes included in 9.2.5.6:
| Security APAR | HIPER APAR | APAR | Description |
| IT42764 | Thirdparty component updates for cumulative security update 9.2.5.6 |
IBM MQ 9.2.5 Appliance Cumulative security update CSU04
(Last modified: February 2023)
IBM MQ Appliance 9.2.5 firmware security patches and fixes will be made available until the end of support of IBM MQ Appliance M2001, scheduled for July 10, 2023. For more information, see Withdrawal Announcement LP18-0336, dated July 10, 2018.
These security patches and fixes are available as a cumulative security update on the IBM MQ Appliance 9.2.5 firmware only. Cumulative security update CSU04 is available from IBM Fix Central Cumulative Security Update for IBM MQ Appliance 9.2.5. As a cumulative update, this update also includes fixes listed below for previous 9.2.5 cumulative security updates.
Fixes included in CSU04:
| Security APAR | HIPER APAR | APAR | Description |
| ✓ | IT41915 | IBM MQ Appliance: CVE-2022-31773 [CVSS base score 8.8] | |
| IT42418 | Update the WebSphere Liberty Profile to 22.0.0.12 | ||
| ✓ | IT42447 | IBM MQ Appliance: CVE-2020-25705 (security/integrity exposure) [CVSS base score 7.4] | |
| ✓ | IT42456 | Update the IBM JRE to level 8.0.7.20 (AIX, Linux, Solaris, and Windows) for IBM MQ | |
| ✓ | IT42457 | IBM MQ Appliance: CVE-2022-21626 [CVSS base score 5.3] | |
| ✓ | IT42613 | IBM MQ Appliance: CVE-2022-43902 [CVSS base score 6.5] |
IBM MQ 9.2.5 Appliance Cumulative security update CSU03
(Last modified: October 2022)
IBM MQ Appliance 9.2.5 firmware security patches and fixes will be made available until the end of support of IBM MQ Appliance M2001, scheduled for July 10, 2023. For more information, see Withdrawal Announcement LP18-0336, dated July 10, 2018.
These security patches and fixes are available as a cumulative security update on the IBM MQ Appliance 9.2.5 firmware only. Cumulative security update CSU03 is available from IBM Fix Central Cumulative Security Update for IBM MQ Appliance 9.2.5. As a cumulative update, this update also includes fixes listed below for previous 9.2.5 cumulative security updates.
Fixes included in CSU03A:
| Security APAR | HIPER APAR | APAR | Description |
| ✓ | IT41133 | IBM MQ CVE-2022-21496, CVE-2022-21434, CVE-2022-21443, CVE-2021-35561 (security/integrity exposure) [CVSS base score 5.3] | |
| IT41424 | Update the JRE to level 8.0.7.15 on AIX, Linux, Solaris,Windows, and 8.0.7.10 on HP-UX for IBM MQ | ||
| IT41539 | Support for forward migration to IBM MQ Appliance 9.3 firmware on M2002 hardware | ||
| ✓ | IT41997 | IBM MQ Appliance CVE-2022-40230 (security/integrity exposure) [CVSS base score 5] | |
| ✓ | IT42021 | IBM MQ CVE-2022-34165 & IBM MQ Appliance CVE-2022-34165 (security/integrity exposure)[CVSS base score 5.4] | |
| ✓ | IT42100 | IBM MQ Appliance CVE-2023-30441 (security/integrity exposure) [CVSS base score 7.5] |
IBM MQ 9.2.5 Appliance Cumulative security update CSU02
(Last modified: August 2022)
IBM MQ Appliance 9.2.5 firmware security patches and fixes will be made available until the end of support of IBM MQ Appliance M2001, scheduled for July 10, 2023. For more information, see Withdrawal Announcement LP18-0336, dated July 10, 2018.
These security patches and fixes are available as a cumulative security update on the IBM MQ Appliance 9.2.5 firmware only. Cumulative security update CSU02 is available from IBM Fix Central Cumulative Security Update for IBM MQ Appliance 9.2.5. As a cumulative update, this update also includes fixes listed below for previous 9.2.5 cumulative security updates.
Fixes included in CSU02:
| Security APAR | HIPER APAR | APAR | Description |
| ✓ | IT41579 | IBM MQ Appliance CVE-2022-22476 (security/integrity exposure) [CVSS base score 5] | |
| ✓ | IT41610 | IBM MQ Appliance CVE-2020-35513 [CVSS base score 5.5] | |
| ✓ | IT41682 | IBM MQ Appliance CVE-2022-32750 [CVSS base score 5.4], IBM MQ Appliance CVE-2022-31774 [CVSS base score 5.4] & IBM MQ Appliance CVE-2022-31775 [CVSS base score 5.5] |
IBM MQ 9.2.5 Appliance Cumulative security update CSU01
(Last modified: July 2022)
IBM MQ Appliance 9.2.5 firmware security patches and fixes will be made available until the end of support of IBM MQ Appliance M2001, scheduled for July 10, 2023. For more information, see Withdrawal Announcement LP18-0336, dated July 10, 2018.
These security patches and fixes are available as a cumulative security update on the IBM MQ Appliance 9.2.5 firmware only. Cumulative security update CSU01 is available from IBM Fix Central Cumulative Security Update for IBM MQ Appliance 9.2.5
Fixes included in CSU01:
| Security APAR | HIPER APAR | APAR |
Description
|
| ✓ | IT40182 | IBM MQ Appliance CVE-2022-22356 and IBM MQ Appliance CVE-2022-22355 [CVSS base score 5.3] | |
| ✓ | IT40192 | IBM MQ Appliance CVE-2021-3550 and IBM MQ Appliance CVE-2021-35603 [CVSS base score 5.9] | |
| ✓ | IT40352 | IBM MQ Appliance CVE-2021-38910 [CVSS base score 3.7] | |
| ✓ | IT40353 | IBM MQ Appliance CVE-2022-0778 [CVSS base score 7.5] | |
| ✓ | IT40453 | IBM MQ Appliance CVE-2020-36518 [CVSS base score 7.5] | |
| ✓ | IT40513 | IBM MQ Appliance CVE-2018-25032 [CVSS base score 3.3] | |
| ✓ | IT40779 | IBM MQ Appliance CVE-2017-18595, CVE-2018-19985, CVE-2018-20169, CVE-2019-19527 [CVSS base score 6.2] | |
| ✓ | IT40979 | IBM MQ Appliance CVE-2022-22475 [CVSS base score 7.1] | |
| ✓ | IT41273 | IBM MQ Appliance CVE-2022-0155, CVE-2022-0536 [CVSS base score 8] |
IBM MQ 9.2.5 Windows, UNIX®
(Last modified: Mar 2024)
| Security APAR | HIPER APAR | APAR | Description |
| IT32558 | DEFCLXQ(CHANNEL) is not honored if the CLUSSDR has multiple hostnames in the CONNAME attribute | ||
| IT32681 | IBM MQ clustering allows an out-of-order internal cluster subscription to incorrectly replace a newer one | ||
| IT33500 | MQ-JMS Connection's ExceptionListener is not called when a JMS Session's TCP/IP socket is disconnected | ||
| IT33764 | IVT run on Wildfly-20 ignored DestinationLookup and ConnectionFactoryLookup activation properties | ||
| IT34173 | Defining a topic with PROXYSUB(FORCE) results in an incomplete set of proxy subscriptions. | ||
| ✓ | IT34213 | sethagrp -u command incorrectly reports 'High Availability configuration already migrated' when command actually fails. | |
| IT34422 | Managed File Transfer schema Monitor.xsd incorrectly states that directory monitors can monitor more than 1 directory | ||
| ✓ | IT34722 | IBM MQ 9.2 managed XMS .Net message listener stops receiving messages after first message is consumed. | |
| ✓ | IT34796 | MQRC_TRUNCATED_MSG_ACCEPTED (2079) received unexpectedly by client | |
| IT34994 | Issuing MQCMD_CHANGE_TOPIC using the MQ Administration Interfacefails with MQRC_PARAMETER_MISSING | ||
| ✓ | IT35080 | When MQPUT is ready to give a message to a waiting MQGET, there is a timing window where a message can be malformed | |
| IT35089 | XMS .NET client applications fail to connect to queue manager when using tls and JNDI connectionFactory | ||
| IT35274 | IBM MQ incorrectly generates AMQ8077W warning, reporting missing 'ALTUSR' access to qmgr when activity trace level set to HIGH | ||
| IT35365 | The browse cursor advances when an AMS-enabled application receives MQRC_TRUNCATED_MSG_FAILED | ||
| IT35366 | Memory leak using Publish/Subscribe with large RFH2 headers | ||
| IT35687 | In IBM MQ if qmstatus.ini permissions are changed while the queue manager is running, endmqm does not return an error. | ||
| IT35827 | amqcgskv32 triggered by runmqras creates zero-byte FDCs continuously | ||
| IT35974 | Managed transfers get stuck if a recoverable error occurs at the same time as a full frame of data has been transferred | ||
| IT36083 | Log migration fails with AMQ7716I: migmqlog command has finished unsuccessfully. | ||
| IT36233 | MQ MFT: Agent property monitorGroupRetryLimit=-1 not behaving as expected | ||
| IT36438 | IBM MQ AMQ8079 warning message "ACTION" section is incomplete | ||
| IT36684 | Expired global units of work will now be logged via AMQ7497W in the queue manager error logs | ||
| IT36740 | AMQ9620E: Internal error on call to SSL function on channel withrc=5 from gsk_secure_soc_write | ||
| ✓ | IT36744 | Unable to move IBM MQ appliance HA queue manager back to its original node after fail over | |
| ✓ | IT36745 | IBM MQ Appliance HA queue manager does not return to its preferred node after unexpected fail over | |
| IT36746 | IBM MQ MFT: Files are left on source, when resource monitor is configured to send batches of 100 files. | ||
| ✓ | IT36756 | Memory leak in amqrmppa process | |
| IT36824 | The AMQ7472W message is unclear about automatic recovery of a damaged object | ||
| IT36885 | Enhancements to runmqras utility | ||
| IT36950 | IBM MQ installation might cause failure in non-IBM MQ programs that use libcurl or libedit libraries | ||
| IT36990 | Queue manager not releasing media recovery log extents | ||
| IT37001 | runmqdnm monitor reports "Unexpected error 2147746132" after migrating from earlier versions of IBM MQ to IBM MQ 9.2 | ||
| IT37355 | IBM MQ appliance might reload when querying system load | ||
| IT37427 | crtdrprimary for a HA queue manager fails with AMQ3930E due to DR replication interfaces mismatch on the HA appliances | ||
| IT37469 | Invalid config-property-type returned by IBM MQ RA results in 'Invalid archive: wmq.jmsra' warnings in WildFly/JBoss. | ||
| IT37502 | WebSphere Application Server transaction recovery fails when activation specs are configured to use BINDINGS_THEN_CLIENT | ||
| IT37606 | "Connection refused" and "connection is closed by foreign host" exceptions handled incorrectly by protocol bridge agents | ||
| IT37651 | The default value for the APPLTAG with IBM MQ classes for Java/JMS can result in the value "jar" | ||
| ✓ | IT37723 | Mishandling of return codes from OS calls might result in Q file corruption after file descriptor limit is hit | |
| IT37726 | IBM MQ AMQP channel stops due to an OutOfMemoryError, and an FDC containing probe identifier XR10072014 is generated | ||
| IT37733 | MFT agent monitorGroupRetryLimit is not working as expected because monitor execution count is not getting updated | ||
| IT37747 | SIGSEGV: address not mapped when MQDISC is issued after automatic client reconnection | ||
| ✓ | IT37800 | IBM MQ error reporting logic might enter an infinite loop and generate many FDC records with probe identifier CO051011 | |
| IT37869 | FDC containing a NullPointerException occurs if a managed transfer enters recovery during negotiation and times out | ||
| IT37878 | WebSphere Application Server activation specifications do not pause when an MDB calls setRollbackOnly() | ||
| IT37881 | SYSTEM.MQTT.TRANSMIT.QUEUE fills up with messages for MQTT clients that are no longer connected | ||
| IT37958 | Wrong error reported if managed transfer fails during initialization due to "SocketException: Connection reset" | ||
| IT37973 | IBM MQ internal program amqoampx hangs which prevents IBM MQ REST web server from restarting | ||
| IT38118 | JMSException containing reason code 2009, rather than 2556, is thrown when automatic client reconnection times out | ||
| IT38158 | Connection handle leak when an IBM MQ-JMS application security exit reports an error | ||
| IT38165 | IBM MQ Explorer shows removed channel property "Register with WLM"(DNSWLM) for a z/OS Queue Manager | ||
| IT38173 | IBM MQ classes for JMS application receives AssertionError during automatic client reconnection | ||
| IT38204 | IBM MQ client applications stop consuming messages from a queue protected with AMS MCA interception. | ||
| IT38291 | AMQ9504 error message does not contain the channel name | ||
| ✓ | IT38375 | Shared memory segments grow without limit in some IBM MQ usage scenarios | |
| IT38380 | Unable to use nested XA transactions with Mule and the Bitronix transaction manager. | ||
| IT38381 | After migrating to IBM MQ 9.2, a multi-instance queue manager fails over sooner in response to delays in log write operations | ||
| IT38420 | Possible memory leak in amqrmppa or amqzlaa0 process when using secure connection to LDAP repository | ||
| IT38423 | IBM MQ JMS clients fail to reconnect when using automatic client reconnection after a network break. | ||
| IT38491 | dmpmqcfg objects missing when used with a z/OS queue manager | ||
| IT38527 | MQTT component MQXR service produces an unnecessary Java dump aspart of the FFST generation. | ||
| IT38542 | Transfer request that hit a problem may see increase in Memory or OutOfMemory Exception | ||
| IT38623 | Receiver channel with PipeLineLength=2 might remain in stopping status indefinitely | ||
| IT38693 | On IBM MQ Explorer, the IBM MQ Knowledge Center link does not work. | ||
| IT38745 | Highly available Managed File Transfer agent uses 100% CPU while trying to reconnect to its agent queue manager. | ||
| IT38764 | RDQM configured for both HA and DR is unable to run on any nodeafter frequent connection interruptions | ||
| IT38769 | SIGSEGV XC130003 xehExceptionHandler FDC in xihGetQueueManagerNames | ||
| ✓ | IT38799 | Queue manager ends unexpectedly with FDC Probe Id HL214091 and error code hrcE_MQLP_NOSPACE | |
| ✓ | IT38930 | Description is not yet available (security/integrity exposure) [CVSS base score 5.6] | |
| IT39013 | Using the IBM MQ REST API to query subscriptions may not provide a complete list | ||
| ✓ | IT39209 | Description is not available (security/integrity exposure) [CVSS base score 5.3] | |
| IT39219 | fteShowAgentDetails can output incorrect/inconsistent information | ||
| ✓ | IT39386 | Description is not yet available (security/integrity exposure) [CVSS base score 10] | |
| ✓ | IT39444 | IBM MQ CVE-2021-45046 (security/integrity exposure) [CVSS base score 3.7] | |
| ✓ | IT39467 | Description is not yet available (security/integrity exposure) [CVSS base score 7.5] | |
| ✓ | IT39558 | IBM MQ Appliance CVE-2022-22316 [CVSS base score 5.3] | |
| ✓ | IT39625 | IBM MQ Appliance CVE-2022-22326 [CVSS base score 4 ] | |
| ✓ | IT39770 | Description is not yet available (security/integrity exposure) [CVSS base score 7.5] | |
| ✓ | IT39829 | IBM MQ Appliance CVE-2022-22321 [CVSS base score 5.1] | |
| ✓ | IT40096 | Queue manager intermittently becomes unresponsive after upgrading to MQ 9.2.x | |
| ✓ | IT40099 | IBM MQ CVE-2022-22325 and IBM MQ Appliance CVE-2022-22325 [CVSS base score 5.1] | |
| SE76177 | End SYSTEM.DEF.CLUSSDR report AMQ8227, "STOPPED" status can't preserve | ||
| SE76423 | Channel sequence number lost after manager restart at IBM MQ 9.2. | ||
| SE76719 | IBM MQ in transaction may error with AMQ7435: The IBM MQ commit control exit program failed. |
IBM MQ 9.2.4 Windows, UNIX®
(Last modified: Mar 2024)
| Security APAR | HIPER APAR | APAR | Description | |
| IT32667 | Sender channel does not stop as expected | |||
| IT32993 | Authentication operations fail if more than one IP address is present in the conname of an LDAP AUTHINFO definition | |||
| IT33849 | MQSC DISPLAY command shows "Not authorized" multiple times | |||
| IT33937 | FDC records with probe ID XC035007 and XC364030 are generated during shutdown of MQ C/ C++ application | |||
| IT33961 | TX series application fails with SIGSEGV in check_target when used with MQ | |||
| IT34363 | Improve diagnostics in zxcHealthThread for unexpected queue manager shutdown | |||
| IT34525 | The amqsrua utility might fail with reason code 2033 (MQRC_NO_MSG_AVAILABLE) | |||
| IT35190 | Enhancements to runmqras utility | |||
| ✓ | IT35378 | Queue manager fails to started with FDC AQ234004 from aqlGetLogHdrOrigin | ||
| IT35443 | Queue manager hangs and becomes unresponsive. An FDC record is generated which reports xecS_E_NO_MEM | |||
| IT35459 | The dmpmqcfg -c command fails with MQRC_ENVIRONMENT_ERROR when SHARECNV(0) set on SVRCONN | |||
| ✓ | IT35489 | IBM MQ CVE-2021-29843 [CVSS base score 5.3] | ||
| IT35941 | Running fteCreateTransfer for a message-to-file transfer, where the source queue is empty, results in a failed transf | |||
| IT36047 | The destination queue of the durable subscription might change when an MQTT application restarts | |||
| ✓ | IT36110 | Many PCF status messages flow through the channels of a Uniform Cluster even though no reconnectable applications are present | ||
| ✓ | IT36179 | IBM MQ CVE-2021-38875 [CVSS base score 6.5] | ||
| IT36306 | XMS client application fails to start after migration to V9.1.3. | |||
| IT36442 | After reporting a AMQXR1016W warning, the IBM MQ Telemetry service generates FDCs containing IBM MQ reason code 2219 | |||
| ✓ | IT36495 | Queue manager might enter partitioned state after appliance reloads | ||
| IT36500 | Transfer item fails with a BFGIO0006E error if the source agent abends and restarts partway through a transfer | |||
| IT36636 | IBM MQ AMQP or IBM MQ Telemetry channel fails to start if the queue manager attribute SSLCRLNL contains an OSCP AUTHINFO object | |||
| IT36700 | SIGSEGV within TXSeries cicsas process when trying to get/convert a message | |||
| IT36701 | IBM MQ-JMS applications connected to EBCDIC character set queue managers fail to move messages to BOQ or DLQ | |||
| IT36702 | Source disposition for transfer items is incorrectly processed if a managed transfer fails due to a transfer recovery timeout | |||
| ✓ | IT36745 | IBM MQ Appliance HA queue manager does not return to its preferred node after unexpected fail over | ||
| IT36752 | MQ generates unnecessary Informational FDC reporting AT040010 atxClose arcE_XAER_PROTO | |||
| IT36960 | Transfer items transferred successfully before a transfer recovery timeout occurs may not be deleted. | |||
| IT37072 | Insufficient diagnostics for failures from DeleteFile() Windows API call | |||
| IT37134 | Potential for SIGSEGV from a null pointer in xcsRequestMutexSemFn | |||
| IT37151 | Provide additional queue manager configuration attributes to control the connection and operation timeout for LDAP calls | |||
| IT37224 | java.lang.NullPointerException thrown when multiple threads connecting to the QMGR concurrently | |||
| IT37251 | IBM MQ appliance might reload while processing RBM requests | |||
| IT37283 | IBM MQ channels running with TLS 1.3 cipherspecs intermittently fails with FDC CO373099 from cciTcpSslResetCallback | |||
| IT37357 | Handle EINVAL error from AIX getuserattr call without writing FDC when username is longer than OS limit | |||
| ✓ | IT37359 | IBM MQ channel process amqrmppa hangs after memory exception | ||
| IT37376 | Unable to install IBM MQ 9.2.0.2 rpm components for Linux when there are multiple installations | |||
|
IBM MQ appliance "sethagrp -e" command becomes unresponsive when queue manager file system is in use | |||
| IT37566 | "Could not find key 'RecoveryTimedOut' in ResourceBundle" errorreported when running fteShowAgentDetails -v | |||
| IT37576 | IBM MQ runmqlsr process might enter an infinite loop and consume a high amount of CPU | |||
| ✓ |
|
Description is not yet available (security/integrity exposure) [CVSS base score 7.5] | ||
| IT37799 | Command event messages are not generated for queue commands which specify the STREAMQ attribute | |||
| IT37819 | MQ Java and .NET clients may receive duplicate messages after rolling back a transaction | |||
| IT37968 | IBM MQ 9.2.4 client connecting to a queue manager via IBM MQ IPT fails with AMQ9296E: Password protection negotiation failed. | |||
| IT38009 | AMQP Service fails to start channel with error MQRC 3361 (MQRCCF_SSL_CIPHER_SUITE_ERROR) | |||
| ✓ | IT38349 | IBM MQ Appliance CVE-2021-38958 [CVSS base score 5.1] | ||
| ✓ | IT38503 | Description is not yet available (security/integrity exposure) [CVSS base score 7.5] | ||
| IT38523 | IBM MQ CVE-2021-2388, CVE-2021-2432 [CVSS base score 7.5] | |||
| IT38544 | The IBM MQ WebConsole only edits the first CHLAUTH records when multiple records exist for same channel. | |||
| ✓ | IT38616 | IBM MQ Appliance HA queue manager reports partitioned state after appliance reload. | ||
| ✓ | IT38766 | IBM MQ appliance queue manager fail over fails if the queue manager file system is in use | ||
| ✓ | IT38788 | IBM MQ Appliance CVE-2021-38967 [CVSS base score 8.2] | ||
| IT38931 | IBM Client REST API does not allow newline (CRLF) characters to be delivered to the destination | |||
| ✓ | IT40901 | IBM MQ CVE-2021-28169, CVE-2021-34428, CVE-2021-28163, CVE-2021-28164, CVE-2021-34429, CVE-2021-28165 [CVSS base score 7.5] | ||
| SE75821 | IBM MQ Manager may crash with CPF9803 "Cannot allocate object" when the journal/journalmsgq locked by non-mq process | |||
| SE75874 | RUNMQRAS may not collect definitions when mqs.ini CCSID is not 37 from IBM MQ 9.1. | |||
| SE75994 | Running strmqweb command has authority problem when submitting by different user profiles. |
IBM MQ 9.2.3 Windows, UNIX®
(Last modified: 22 July 2021)
| Security APAR | HIPER APAR | APAR | Description |
| IT31885 | Output from the amqrfdm utility shows invalid value on the "Exp"or "Upd" attributes for a cluster object. | ||
| IT32137 | A valid Windows user ID with a space character in 12th position fails to connect to queue manager. | ||
| IT32295 | IBM MQ classes for Java application hangs when using the BINDINGS transport and getting messages with the MQGMO_CONVERT option. | ||
| IT32871 | A queue manager terminates due to a SIGSEGV within the execution controller process amqzxma0. | ||
| IT33117 | IBM MQ RDQM might not switch to or start on its configured preferred node. | ||
| IT33209 | dltdrprimary command does not completely remove DR definition from HA secondary appliance. | ||
| IT33213 | IBM MQ Appliance link aggregation interface goes down when LLDP is enabled on network switch. | ||
| IT33572 | amqspdbg with -i, -q, -p, or -a options fails with an error and generates an FDC. | ||
| IT33893 | The output of 'dmpmqaut -p [Principal] -e' is misleading when the IBM MQ authority is defined at the group level. | ||
| IT33970 | The dspmqtrc duplicate line suppression functionality prints incorrect lines. | ||
| IT34004 | xcsFreeMemFn xecS_I_PRIVATE_MEMORY_ERROR from amqrmppa during thread cleanup. | ||
| IT34015 | The setmqenv command is missing from the redistributable client package on Linux x86-64. | ||
| IT34095 | The NETTIME parameter for the DISPLAY CHSTATUS command has unexpectedly high values. | ||
| IT34118 | Miscalculation of expiry time for SYSTEM.CLUSTER.HISTORY.QUEUE messages. | ||
| IT34332 | Channel names are blank in MQSC and IBM MQ Explorer after direct migration from IBM MQ 8.0.0.1, 8.0.0.2, or 8.0.0.3 to 9.1.5 or later. | ||
| ✓ | IT34488 | IBM MQ listener runqmqlsr not accepting new connections and also consuming high CPU. | |
| IT34850 | Redistributable MFT command 'fteCreateEnvironment' repeatedly prepends to the PATH environment variable. | ||
| ✓ | IT35258 | Channels remain in initializing state for longer time while starting and messages build up on SYSTEM.CHANNEL.INITQ. | |
| IT35262 | Call to xa_open fails with XAER_INVAL '-5 in XA configuration with TXSeries. | ||
| IT35319 | The OCSPTimeout and SSLHTTPConnectTimeout parameters are not read correctly from the configuration file. | ||
| IT35322 | Queue resource monitor submits two message-to-file transfers for the same message or message group on consecutive polls. | ||
| IT35461 | AMQ6150 error message states a timeout period of zero minutes. | ||
| IT35488 | Partial repository queue manager does not report "update not received" error for queue manager. | ||
| IT35512 | Setting OCSPAuthentication=REQUIRED generates AMQ7076 warning incorrectly. | ||
| ✓ | IT35557 | NPMCLASS(HIGH) not retaining non-persistent messages during QM graceful failover in RDQM HA environment. | |
| IT35582 | IBM MQ MFT Message-To-File Transfer request using a protocol bridge agent (PBA) as the source agent fails silently. | ||
| IT35599 | Standby instance of a Managed File Transfer highly available agent shuts down after being disconnected from its queue manager. | ||
| IT35701 | Messages left on source queue at the end of a successful message-to-file transfer. | ||
| IT35810 | IBM MQ Appliance might reload when a file is downloaded by using WebUI or REST API. | ||
| IT35834 | TLS/SSL channel on distributed platform intermittently stops when partner channel is running on HPE Non Stop. | ||
| IT35878 | Multiple instances of a highly available MFT agent start as the active instance following a queue manager restart. | ||
| IT35881 | IBM MQ Appliance might reload while closing an LDAP connection. | ||
| IT36036 | Using MQ REST API Gateway to administer remote queue manager can result in MQWB0000E Error. | ||
| IT36250 | The ctrhagrp command fails to re-create the HA group on a replaced appliance. | ||
| IT36262 | IBM MQ Appliance HA synchronization might be slow after restart of one of the appliances. | ||
| IT36308 | Exception containing reason code 2009 is thrown even though an application is still connected to a queue manager. | ||
| IT36310 | IBM MQ appliance might reload due to error SSL function/TLS. | ||
| ✓ | IT36319 | IBM MQ CVE-2020-27225 (security/integrity exposure). | |
| ✓ | IT36321 | IBM MQ Appliance vulnerability in TLS (CVE-2020-4831). | |
| IT36351 | The IBM MQ Advanced software license tag file has corrupted content and is not reported correctly by ILMT. | ||
| IT36372 | Permission denied errors reported on the console by runmqras command on the IBM MQ Appliance. | ||
| IT36491 | RDQM creation might fail due to port conflict. | ||
| IT36621 | Changes to IBM MQ Appliance link aggregation LLDP configuration property. | ||
| IT36707 | Potential SIGSEGV in xcsFFSTS code. | ||
| IT36729 | FDC from xcsFreeMemFn in amqrmppa process reporting xecS_I_PRIVATE_MEMORY_ERROR FROM during thread cleanup. | ||
| IT36855 | If certificate renegotiation occurs many times, High memory use can occur in IBM MQ channel processes. | ||
| IT37016 | Update DRBD and Pacemaker packages supplied with IBM MQ 9.2. | ||
| IT37089 | Channel socket error detection logic can generate invalid internal protocol flow. | ||
| ✓ | IT37166 | Description is not available (security/integrity exposure). | |
| IT37223 | IBM MQ Managed .NET Client fails unable to connect to queue manager using OpenShift routes | ||
| ✓ | IT37277 | 172544, CVE-2020-7676, CVE-2019-14863, 172550, 172543, CVE-2019-10768 for IBM MQ Appliance | |
| ✓ | IT37279 | CVE-2020-25648 and CVE-2020-25692 for IBM MQ Appliance | |
| IT40968 | Error: "AMQ8147E IBM MQ object SYSTEM.DEF.AMQP not found" is reported when using MQSC to recreate SYSTEM.DEF.AMQP | ||
| SE75505 | IBM i COBOL apps linked to AMQ0STUB and ILE C & RPG apps linked to LIBMQM fail to co-exist in commit control. | ||
| SE75506 | Update openssl to 1.1.1k. | ||
| SE75562 | blockaddr.ini should be created with CCSID 37 even in multi languages environment on IBM i. |
IBM MQ 9.2.2 Windows, UNIX®
(Last updated: 22 July 2021)
| Security APAR | HIPER APAR | APAR | Description |
| IJ23167 | An internal error CWSMQ0286E is thrown when XMS .NET client tries to retrieve a message containing mqex folder in header. | ||
| IJ25042 | If backout queue is full, XMS .NET doesn't send the messages withRFH header to dead-letter queue. | ||
| IT29638 | The DISPLAY CHSTATUS command output for an AMQP client instance always shows AMQPKA(0) instead of the actual value. | ||
| IT29963 | The JMSAdmin tool is partially shipped by the redistributable Java client "{version}-IBM-MQC-Redist-Java.zip". | ||
| IT31901 | Memory leak in the AMS (Advanced Message Security) component of IBM MQ. | ||
| IT32081 | Error log incorrectly reports remote certificate validation failed when local certificate is invalid. | ||
| IT32415 | Specifying the invalid. | ||
| IT32554 | Channel exits written in Java are unable to access the local address used by the channel. | ||
| IT32854 | Upgrade Qpid Proton-j level for IBM MQ to Qpid Proton 0.33.6. | ||
| IT33261 | The amqrmppa process terminates with memory exception in rrpAdjustPool or rrpRockPool. | ||
| IT33387 | IBM MQ Explorer MFT capture log shows an incorrect destination path. | ||
| IT33398 | FDC with Probe KN432051 from kpiAppSignalTask reporting missing signalapp.xx files. | ||
| IT33439 | Memory leak in IBM MQ when using AMS. | ||
| IT33571 | Channel Status bytesent and bytesrcvd attributes show incorrect value. | ||
| ✓ | IT33612 | IBM MQ Appliance HA initialization error during reboot. | |
| ✓ | IT33668 | MQCTL does not function as expected when issued using MQOP_SUSPEND option. | |
| ✓ | IT33901 | Performance degradation when using extended message selection. | |
| IT34091 | FDCs with ProbeIDs ZC004062 and ZC004040 from zcpCreateMessage. | ||
| ✓ | IT34178 | IBM MQ Appliance is affected by a denial of service vulnerability (CVE-2020-4869). | |
| IT34229 | The 'crtmqfp' utility does not permit the default installation location to be specified when repackaging RPM files. | ||
| IT34336 | MQGET fails with 2004 MQRC_BUFFER_ERROR. | ||
| IT34350 | MFT File-To-Message transfer with delimiter greater than the default length generates two 0 byte messages. | ||
| IT34358 | Displaying channel status for IBM MQ Telemetry channels by using filter on CONNAME attribute might fail with NullPointerException. | ||
| IT34367 | MQSeriesRDQM RPM package does not enforce prerequisite on Pacemaker RPM package. | ||
| IT34419 | IBM MQ Appliance queue manager failover is unsuccessful if the queue manager file system is in use by another process. | ||
| IT34463 | Administrative REST API parameter ibm-mq-rest-gateway-qmgr cannot be used with the REST API discovery feature, and CORS. | ||
| ✓ | ✓ | IT34485 | CVE-2020-4931 for IBM MQ Appliance & CVE-2020-4931 for IBM MQ. |
| IT34486 | MFT error message 'BFGSS0024E' does not provide details on which object it received the MQI Error message. | ||
| IT34493 | MQ Appliance: After disabling eth20 interface addition of a standalone queue manager to HA at DR site fails with AMQ6546E. | ||
| IT34523 | Upgrade JRE level for IBM MQ 9.0 to Java 8.0.6.20 for AIX, Linux, Solaris, and Windows & to Java 8.0.6.10 for HP. | ||
| IT34573 | The FTETopicSubscriptionCollector section of fteRAS takes a longtime to complete. | ||
| IT34591 | Destination agent generates an ABEND file when processing a managed transfer that has timed out. | ||
| IT34605 | Update level of LDAP client supplied with IBM MQ 9.0 LTS to 6.4.0.22 / 6.3.1.27. | ||
| IT34623 | Managed File Transfer agent abends after migrating from version 8.0.0.3 or earlier. | ||
| IT34684 | JMSCC0108 reported by the MQ-RA reference the wrong version of the Knowledge Center. | ||
| IT34691 | IBM MQ Appliance power outage might result in the IBM MQ Web Console reporting 'Error 500: Internal error'. | ||
| IT34780 | MFT Redistribution 'fteCreateEnvironment' command does not validate the installation name argument. | ||
| IT34895 | After failure in IBM MQ Appliance makedrsecondary command, the HA/DR Queue manager failed to start on second node. | ||
| IT34967 | IBM MQ classes for JMS BROKERPUBQMGR property validation failure with asterisk characters. | ||
| IT34978 | If they are unable to connect to a file server using the SFTP protocol, managed transfers get stuck. | ||
| IT35074 | Potential memory leak during of cached resources in multithreaded asynchronous consume client application. | ||
| IT35078 | Improve error message when a certificate does not meet key length requirements. | ||
| IT35156 | Upgrade Eclipse level for IBM MQ 9.0 LTS to 4.15. | ||
| IT35199 | Intermittent IBM MQ Appliance reload when SNMP is enabled. | ||
| IT35214 | Setmqenv does not work in the default/dash shell. | ||
| IT35222 | IBM MQ MFT: NullPointerException thrown by CommandHandler thread with FFDC probe id FFDC_001. | ||
| IT35279 | IBM MQ Appliance: HA queue managers configured for DR fails to be migrated from 9.1. to 9.2. | ||
| IT35336 | Update level of GSKit supplied with IBM MQ 8 to GSKit 8.0.55.19. | ||
| IT35337 | Update level of LDAP client supplied with IBM MQ 8 to 6.4.0.22 /6.3.1.27. | ||
| IT35342 | Upgrade ICU4J for IBM MQ MFT to 68.2. | ||
| IT35362 | Application terminates with SIGSEGV when trace is enabled for AMS operations. | ||
| IT35389 | Exception reason code 2063 thrown when AMS Java clients access CA certificate chains within cryptographic hardware. | ||
| IT35398 | SourceTransferStartExits are run twice for the same managed transfer following a network issue during negotiation. | ||
| ✓ | IT35440 | CVE-2020-8284 | |
| IT35533 | Upgrade Apache Commons libraries for IBM MQ v9.2 to the latest levels. | ||
| IT35534 | Update Bouncy Castle shipped by IBM MQ v9.2 to version 1.68. | ||
| IT35540 | Upgrade the JRE level for IBM MQ V9.2 to Java 8.0.6.25 for AIX, Linux, and Windows. | ||
| IT35541 | Update the IBM MQ embedded WebSphere Liberty Profile to 20.0.0.12. | ||
| IT35594 | Update level of LDAP client supplied with IBM MQ 9.2 LTS to 6.4.0.22. | ||
| IT35683 | Update the Fabric Gateway version supplied with IBM MQ to v2.2.1. | ||
| IT35808 | Update DRBD and Pacemaker packages supplied with IBM MQ 9.2. | ||
| IT35809 | IBM MQ MFT resource monitor runs on multiple threads at the same time after its config. | ||
| IT36118 | RDQM queue manager failed to start due to all nodes in secondary state. | ||
| IT36124 | Updte the version of bouncy Castle shipped within the IBM MQ installation. | ||
| IT36347 | IBM MQ Appliance might fail to collect sysrecord or other logs in error report. | ||
| IT36377 | The crtdrsecondary command fails with "Invaild command string entered" in the IBM MQ Appliance web console when configuring DR. | ||
| IT36788 | BYTESSENT and BYTESRCVD channel status values do not wrap as expected. | ||
| ✓ | IT37970 | RDQM queue managers might fail to start after network outage between nodes | |
| SE75343 | Update OpenSSL to 1.1.1j. |
IBM MQ 9.2.1 Windows, UNIX®
(Last modified: 03 Dec 2020)
| Security APAR | HIPER APAR | APAR | Description |
| IT23170 | If the API subscription destination resolves to non-local cluster queue, published messages are sent to the DLQ. | ||
| IT29565 | IBM MQ client app that uses MQCONNX to make an SSL connection fails with FDC from xehExceptionHandler with rriCopyMQSCO on the stack. | ||
| IT29944 | USEDLQ cluster channel attribute is not replicated across cluster members. | ||
| IT30545 | IBM MQ .NET managed client application returns 2059 when setting certlabel in hashtable properties. | ||
| IT30601 | Performance implications of IT28621 changes. | ||
| IT31118 | MQCMIT of deep queue takes a long time to complete, leading to a transmission queue buildup. | ||
| IT31225 | IBM MQ Managed File Transfers from an SFTP server occasionally hang. | ||
| IT31415 | FDC record with probe id 'OP008000' is generated when runmqdlq is processing messages on the dead letter queue. | ||
| IT31883 | IBM MQ controller process (amqzxma0) stopped due to SIGSEGV after failing to allocate a shared memory set. | ||
| IT31898 | IBM MQ Appliance: 'makehaprimary' command incorrectly reports AMQ6682 error. | ||
| IT31909 | MQTT Channel ends unexpectedly due to NullPointerException. | ||
| IT31917 | IBM MQ Explorer shows protocol value of [Unknown] in channel status of MQTT clients. | ||
| IT32110 | IBM MQ 9.1.4 queue manager might take longer to end and this in turn causes a hang when an RDQM is failed over. | ||
| ✓ | IT32208 | CVE-2020-4870 for IBM MQ and CVE-2020-4870 for IBM MQ Appliance. | |
| IT32212 | Topic handles are not closed when a Classes for Java MQQueueManager disconnects. | ||
| IT32292 | AMQ5542 message misleadingly mentions CHCKCLNT(REQDADM) when using LDAP for users/groups. | ||
| IT32294 | FDC with probe id ZD048010 from zruMetaNotify at queue manager restart. | ||
| IT32481 | IBM MQ reports FDC RM008005/rrxStopChannel after channel reconnects and adopts previous instance. | ||
| IT32547 | Improve tracing in amqscnxc. | ||
| IT32583 | A managed .NET client application initializes slowly in multi-user or heavily loaded environments. | ||
| IT32606 | IBM MQ .Net core application takes several seconds to reestablish a connection with a queue manager after a failover. | ||
| IT32772 | If the replication IP is assigned to a valid local interface, IBM MQ Appliance setdrlink and sethalink commands do not verify. | ||
| IT32775 | Invalid Managed File Transfer scheduled transfers cannot be deleted. | ||
| IT32925 | Update JMQI trace to remove unnecessary values from the options field. | ||
| IT32935 | Managed File Transfer agent restart changes the time zone of scheduled transfer time. | ||
| ✓ | IT32949 | Queue manager terminates due to a SIGSEGV issued for amqrrmfa process with Probe Id XC130004. | |
| IT32987 | NullPointerException occurs when activation specification or WebSphere Application server listener port is configured to use message retention. | ||
| IT33028 | An IBM MQ client receives return code 2119 "MQRC_NOT_CONVERTED" from MQGET when an RFH buffer exceeds the SSL transmission size limit. | ||
| ✓ | IT33097 | CVE-2020-4528 | |
| IT33175 | Managed File Transfer protocol bridge agent generates an FDC when fteShowAgentDetails is run with the -d option. | ||
| IT33189 | IBM MQ MFT fteCreateTransfer from a queue results in a zero byte file if the source queue is empty. | ||
| IT33552 | Using IBM MQ Explorer against IBM MQ 9.0 for z/OS to create a channel does not enable the selection of certain SSL ciphers. | ||
| IT33590 | Resource adapter, deployed into embedded WebSphere Liberty and started by Liberty SPIs, cannot make secure connections to IBM MQ. | ||
| IT33630 | Upgrade the JRE level for IBM MQ to Java 8.0.6.15 for AIX, Linux, Solaris, and Windows. | ||
| IT33633 | Upgrade Apache Commons IO for IBM MQ 9.2 to the latest level. | ||
| IT33639 | Update Bouncy Castle shipped by IBM MQ 9.2. | ||
| IT33642 | Upgrade CometD and Jetty shipped with IBM MQ 9.2 for Linux (X86-64). | ||
| IT33672 | Warning message generated by the IBM MQ Explorer cluster plugin test "Duplicate cluster members" is grammatically incorrect. | ||
| ✓ | IT33772 | CVE-2020-4682. | |
| IT33794 | NullPointerException when using a JSON format CCDT that contains security exit information with no use data. | ||
| IT33852 | IBM MQ classes for JMS generate NullPointerExceptions when an application is accessing a queue or a topic. | ||
| ✓ | IT33881 | CVE-2018-16878, CVE-2018-16877, CVE-2019-3885 for IBM MQ and for IBM MQ Appliance | |
| IT33894 | SourceTransferStartExits can be invoked twice for the same managed transfer. | ||
| IT33914 | Update the IBM MQ embedded angular.js to 1.8.0. | ||
| ✓ | IT33933 | CVE-2019-17638 | |
| IT33936 | Provide mechanism to trace the New Web Console Javascript that runs inside a browser. | ||
| IT33962 | IBM MQ Explorer 9.2 Welcome pages reference earlier versions of the IBM MQ Knowledge Center. | ||
| IT34002 | IBM MQ adding/removing features from a Windows installation can damage the Web Console installation. | ||
| IT34105 | IBM MQ Explorer License on Windows is redirected to IBM MQ 9.0 content. | ||
| IT34120 | Running IBM MQ Explorer with trace enabled does not generate all of the expected trace files. | ||
| IT34127 | Additional diagnostics to investigate a SIGSEGV error reported by an amqrmppa process. | ||
| IT34133 | MFT error message 'BFGIO0121E' incorrectly specifies a fully qualified filename instead of checksum values. | ||
| IT34168 | Managed transfers are incorrectly marked as "Successful" rather than "Partially Successful". | ||
| IT34217 | IBM MQ Explorer fails to connect to a remote Managed File Transfer (MFT) configuration. | ||
| IT34220 | Upgrade COMETD shipped with IBM MQ 9.1 for LINUX (X86-64). | ||
| IT34230 | Memory overwrite error using amqssslc sample. | ||
| IT34251 | Upgrade Apache Ant for IBM MQ 9.0 and 9.1 to the latest level (1.10.9). | ||
| IT34252 | Upgrade Apache Commons IO for IBM MQ 9.1 to the latest level (2.8.0). | ||
| IT34253 | Update the IBM MQ embedded WebSphere Liberty Profile from 20.0.0.6 to 20.0.0.9 + PH29368. | ||
| IT34265 | Delays when using the administrative REST API gateway to process requests for different queue managers simultaneously. | ||
| ✓ | IT34277 | CVE-2020-7676 | |
| IT34391 | RDQM resource probe fails during "stop" action which then prevents auto-restart of the queue manager. | ||
| IT34436 | Zero byte content IBM MQ messages get generated during MFT File to Message transfers when using a prefix delimiter. | ||
| IT34455 | Update level of libcurl supplied with IBM MQ 9.1 LTS to 7.72.0. | ||
| ✓ | ✓ | IT34485 | Description is not available (security/integrity exposure). |
| IT34686 | A failure to downgrade the appliance firmware to an earlier level reports AMQ6546E instead of a meaningful error. | ||
| IT34757 | IBM MQ Appliance status command may not correctly report failure states if there is an HA failure on both HA appliances. | ||
| IT34899 | IBM MQ Appliance "service show component-firmware" command does not report network module firmware version information. | ||
| IT35081 | TCP listener port value is not validates against the documented maximum of 65535. | ||
| IT35854 | FDC generated when runamscred is run with no parameters. | ||
| PH26607 | IBM MQ MFT 'fteListAgents' command throws a java.lang.NullPointerException. | ||
| SE71857 | Using MQRC to convert an IBM MQ error log file to JSON format results in corrupt Japanese characters on IBM i. | ||
| SE74591 | IBM MQ C/RPG/COBOL CLIENT INSTALL WITH TLS AND ONE-WAY AUTHENTICATION. |
IBM MQ 9.2.0 Windows, UNIX®, IBM i
(Last modified: 23 July 2020)
| Security APAR | HIPER APAR | APAR | Description |
| IT25989 | Enhancements to runmqras utility. | ||
| IT26021 | XMS .NET multithreaded async client consumer application fails to process poison messages in bindings mode. | ||
| IT27711 | Trace enhancements for the IBM MQ classes for Java/JMS. | ||
| IT27745 | Incorrect error handling by amqrmppa process while using message selectors. | ||
| IT28461 | Object damage after running amqldmpa utility in STANDARD bindings mode. | ||
| IT28799 | IBM MQ FDCS with Probe IDs RM215010 and RM220005 are written after cluster transmission queue is set to NOSHARE. | ||
| IT29089 | IBM MQ 9.1 queue manager migrated from IBM MQ 7.1 generates FDC AD028008during startup. | ||
| IT29139 | PCF response messages are written to the dead letter queue when .NET application uses PCF commands. | ||
| IT30722 | IBM MQ client reports "AMQ9671:The PKCS #11 token password specified is invalid" when token password is correct. | ||
| IT30738 | Version 7.0 JMS client application connecting to queue manager causes AMQ9504 PROTOCOL ERROR and FDC with probe ID RM680037. | ||
| ✓ | IT30785 | IBM MQ Appliance reports Invalid log type parameter for parse and mpgw log categories. | |
| IT30847 | IBM MQ Managed .Net client connecting to queue manager fails intermittently with MQRC 2195. | ||
| IT31067 | If PSMODE is set to COMPAT, amqsrua sample program fails. | ||
| IT31238 | IBM MQ classes for Java application cannot get NameValueData from RFH2 when using CCSID 1200 with little endian encoding. | ||
| IT31302 | Unable to delete CHILD / PARENT from PUBSUB hierarchy when the Queue Manager CCSID is 1208. | ||
| ✓ | IT31336 | IBM MQ Appliance CVE-2020-4375 | |
| ✓ | IT31349 | CVE-2020-4376 for IBM MQ and CVE-2020-4376 for IBM MQ Appliance. | |
| IT31399 | A newly created or an existing replicated data queue manager (RDQM) does not start after upgrading to IBM MQ 9.1.0.4 fix pack. | ||
| IT31420 | Exclude listing proc files in error report. | ||
| IT31428 | IBM MQ control program dspmqtrn -e can incorrectly output some internally-created XA transactions. | ||
| IT31431 | IBM MQ appliance createcert and createcertrequest commands truncate last character of DN if escape character present. | ||
| IT31458 | IBM MQ client using distribution lists receives 2009 and an FDC with probe RM680078 is generated. | ||
| IT31459 | userrestore command on IBM MQ Appliance fails with AMQ6650. | ||
| IT31529 | .NET client connecting with a TLS enabled channel fails with RC=2538 when using TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384. | ||
| IT31562 | IBM MQ fails to write to queue manager error log files after ERROR_SHARING_VIOLATION on Windows. | ||
| IT31633 | Managed transfers come out of recovery and immediately fail with a BFGIO0410E error. | ||
| ✓ | IT31663 | CVE-2020-4592 for IBM MQ and CVE-2020-4592 for IBM MQ Appliance. | |
| IT31670 | IBM MQ Windows installation in a particular order removes "Web Administration" feature. | ||
| ✓ | IT31684 | After strmqm -ns, OAM can write corrupt data records to its persistent store. | |
| IT31703 | If SYSTEM.ADMIN.CONFIG.EVENT is a cluster queue and not a qlocal, MQRC 2085 is generated. | ||
| IT31733 | IBM MQ 9.1 Appliance displays wrong error message if it fails to create HA queue manager due to full errors file system. | ||
| IT31738 | Improve diagnostics in FDC with probe ID CO247199 in IBM MQ GSKit read or write functions. | ||
| IT31820 | PipeLineLength=2 channel ends and writes FDC with probe XC006001including error code xecS_I_PRIVATE_MEMORY_ERROR. | ||
| IT31832 | fteCreateMonitor ignores any monitor metadata when recreating a monitor from an input file using the -ix parameter. | ||
| IT31843 | Using IBM MQ Explorer against z/OS to create a channel does not enable the selection of certain SSL ciphers. | ||
| IT31856 | Messages on SYSTEM.PROTECTION.ERROR.QUEUE cannot be processed byrunmqdlq using a DESTQ rule. | ||
| IT31898 | IBM MQ Appliance make a primary command incorrectly reports AMQ6682 error. | ||
| IT31958 | Upgrade Apache Commons IO, Lang, Logging & Net JAR libraries for IBM MQ MFT. | ||
| IT31979 | Upgrade Apache Commons FileUpload to 1.4 IBM MQ. | ||
| IT32030 | RBM CLI login failure could cause unexpected appliance reload. | ||
| IT32052 | dmpmqaut did not output an authority record for a specific object name, even though it existed in the OAM. | ||
| ✓ | IT32234 | CVE-2019-1551 | |
| IT32247 | A queue manager became unresponsive when an access violation in lcsFNCLinkAdd caused the AMQZLAA0 process to abnormally end. | ||
| IT32258 | Memory leak in the amqzlaa0 process when the queue manager is processing MQSUBRQ call for a retained publication. | ||
| IT32261 | AMQ9999 is reported when an unrelated channel reports AMQ9645. | ||
| IT32263 | Add "DISPLAY CONN(*) TYPE(*) ALL" to IBM MQ runmqras. | ||
| IT32320 | IBM MQ Appliance, 8436-55X, Alert LED in the front panel show incorrect status. | ||
| IT32337 | Managed transfers run slowly after upgrading to IBM MQ 9.1 LTS. | ||
| IT32401 | Improve diagnostics for socket failures when determining IP configuration. | ||
| IT32409 | AMQ6546E error reported when creating an HA-DR secondary without using floating IP. | ||
| IT32434 | Exclude sys files listing in error report. | ||
| IT32443 | haregtyp /r reports incorrect error message when the command fails. | ||
| ✓ | IT32555 | IBM MQ uniform cluster queue manager creates cluster sender channel instead of cluster receiver channel. | |
| IT32630 | IBM MQ Appliance reports high memory usage due to memory leak in corosync process. | ||
| IT32639 | JMS ConnectionFactory property CNLIST does not work in Apache Tomcat. | ||
| IT32673 | MSCS Cluster log reports error 126 MQ DLL not found, but the correct error is Resource Name is unknown. | ||
| IT32703 | ValidateAuth=No does not preserve non-default file permissions on queue manager error logs. | ||
| IT32708 | IBM MQ Java client application ArrayIndexOutOfBoundsException when using MQCCRED with TLS and SSLPEER. | ||
| IT32726 | IBM MQ 9.1.5 CD classes for Java application gets EOFException when processing PCF messages containing MQI accounting data. | ||
| ✓ | IT32762 | CVE-2020-4203 | |
| IT32824 | Upgrade CometD shipped with IBM MQ V9.1 for Linux (X86-64). | ||
| IT32866 | IBM MQ Appliance reports SFP+ error even though supported SFP+ module is in use. | ||
| IT32924 | IBM MQ Client abends in MQCTL when accessing AMS message, generating FDC with Probe XC130031 - Access Violation. | ||
| IT33094 | After DR test, queue manager's dspmq DR status shows "STATUS NOT AVAILABLE". | ||
| IT33099 | CVE-2020-4498 for IBM MQ Appliance | ||
| IT33201 | AMQ9526E message sequence number error between distributed and zOS channels. | ||
| IT33347 | AMQ3879E and AMQ3812E errors when creating RDQM. | ||
| ✓ | PH19731 | Managed File Transfer source agent abends after a managed transfer resumes after coming out of recovery. | |
| SE72996 | MFT 9.0 slip installation over version 8 might leave old version 8 files in IFS. | ||
| SE73087 | MQM400-CHKPRDOPT might mark 5724H72 as error. |
[{"Line of Business":{"code":"LOB67","label":"IT Automation \u0026 App Modernization"},"Business Unit":{"code":"BU048","label":"IBM Software"},"Product":{"code":"SSYHRD","label":"IBM MQ"},"ARM Category":[{"code":"a8m0z0000001eskAAA","label":"APARs \u0026 PTFs"}],"ARM Case Number":"","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF012","label":"IBM i"},{"code":"PF016","label":"Linux"},{"code":"PF033","label":"Windows"}],"Version":"9.2.0"}]
Was this topic helpful?
Document Information
Modified date:
28 March 2024
UID
ibm16226320