Maximo Asset Management 7.6.0.9 interim fix 004 released

Invoices

After you apply a feature pack, you cannot approve or release an invoice on services. The following error occurs: BMXAA8229W - Record  POLINE: ID=xxxx has been updated by another user.

System User Interface

After you upgrade Maximo Asset Management, in the Purchase Requisition application, when you change the the status of a record, the status on the List tab is not refreshed.

Graphical Assignment - Repair Facility

In the Graphical Assignment - Repair Facility application, a Location shift to a time outside of the specified work time is not causing the assignment to turn yellow.

Graphical Assignment

In the Graphical Assignment - Repair Facility application, double-booking a location does not cause a yellow indication.

Graphical Assignment

In the Graphical Assignment - Repair Facility application, if a parent does not have an association with the repair facility, the parent is not displayed.

Graphical Assignment

In the Graphical Assignment application, a rollings schedule or work list only changes the start and end dates but does not refresh the record.

Graphical Assignment

In the Graphical Assignment application, after you close a tooltip, the dropdown menu n the corner of teh browser remains.

Graphical Assignment

In the Graphical Assignment application, if craft names have underscores, the assignments disappear after running optimization.

Graphical Assignment

In the Graphical Assignment application, on the Activity table, the Filter drop down menu is not available.

Graphical Assignment

In the Graphical Assignment application, on the Filtered Assignment page, you cannot assign available labor.

Graphical Assignment

In the Graphical Assignment application, on the More Information tab, your current schedule and work list are not displayed.

Graphical Assignment

In the Graphical Assignment application, optimization does not consider the alternative resource for the time period defined.

Graphical Assignment

In the Graphical Assignment application, reassignment is not working when performing an undo or redo of the last action taken.

Graphical Assignment

In the Graphical Assignment application, some assignments are not in black lettering.

Graphical Assignment

In the Graphical Assignment application, spatial optimization is not working when the Start and End locations are not the same.

Graphical Assignment

In the Graphical Assignment application, the Apply Individual Street Level Routes action is not working.

Graphical Assignment

In the Graphical Assignment application, the Refresh Interval field should only be visible on the More Information tab if the Scheduler Plus license exists. However, this field is visible without the license.

Graphical Assignment

In the Graphical Assignment application, the right-click menu is not working when the System property mxe.skd.automationids.enabled is set to TRUE.

Graphical Assignment

In the Graphical Assignment application, the skd.gantt.view.snap_to_interval_mins property is available.

Graphical Assignment

In the Graphical Assignment application, when assigning a work order to available labor and then clicking the assignment, you receive a message telling you that an unknown error has occurred.

Graphical Assignment

In the Graphical Assignment application, when creating a new scenario and then typing in the scenario template name, you receive a message telling you that an unknown error has occurred.

Graphical Assignment

In the Graphical Assignment application, when creating a work list without a work query, you receive a message that tells you that the total activities records for that project exceeds the limit of records allowed to be created.

Graphical Assignment

In the Graphical Assignment application, when the end location is changed, and you try to assign a work assignment to a Labor, you receive a message that tells you that an unknown error has occurred.

Graphical Assignment

In the Graphical Assignment application, when the the System property mxe.skd.syncwodates property is set to 1, the scheduled end date does not move when an assignment is added that has a date past the existing scheduled end date.

Graphical Assignment

In the Graphical Assignment application, when you are looking for Labor that has the View Multi Craft icon available, the Multi Craft dialog does not appear when you click the icon.

Graphical Assignment

In the Graphical Assignment application, when you assign a work order to a Labor or Crew that is outside of the default work zone, clicking OK does not work.

Graphical Assignment

In the Graphical Assignment application, when you assign available labor the following error occurs: ASSIGNMENT BMXAA4214E - An unknown error has occurred.

Graphical Assignment

In the Graphical Assignment application, when you assign multiple assignments for a crew, the duration of the assignments is incorrect.

Graphical Assignment

In the Graphical Assignment application, when you change the owner of an action you must refresh the record for the record to be updated.

Graphical Assignment

In the Graphical Assignment application, when you create a schedule with a work order and you move to Assignment or Dispatch, the unassigned records are not displayed. The dates are only at the task level and not the work order level.

Graphical Assignment

In the Graphical Assignment application, when you filter dates with > < operators, the results are incorrect.

Graphical Assignment

In the Graphical Assignment application, when you open the Modify Availability window, in the Resource section, the range of scheduled days do not display correctly.

Graphical Assignment

In the Graphical Assignment application, when you right click on an appointment or note, the following error occurs: BMXAA4214E - An unknown error has occurred.

Graphical Scheduling

In the Graphical Assignment application, when you run optimization on a schedule with partial resources, the optimization is incorrect.

Graphical Assignment

In the Graphical Assignment application, when you try to assign a work order to a labor and crew outside of the Default Work Zone, nothing happens when you click OK.

Graphical Assignment

In the Graphical Assignment application, work orders are assigned to a different parent from the one in their hierarchy.

Graphical Assignment

In the Graphical Assignment application, work that is not selected on a hierarchy is still highlighted blue.

Graphical Assignment

In the Graphical Assignment field, deleting an assignment does not work for scenarios.

Graphical Scheduling - Large Project

In the Graphical Scheduling - Large Project application, when the Calculate Duration Action occurs, the start times, end times, and duration are not displayed.

Graphical Scheduling - Large Project

In the Graphical Scheduling - Large Project application, when you create a schedule based on an existing graphical scheduling record with a type of asset or location, the query section is not correct.

Graphical Scheduling - Large Project

In the Graphical Scheduling - Large Project application, when you create an asset or location type schedule and select new row, the button for query restrictions is missing.

Graphical Scheduling - Large Project

In the Graphical Scheduling - Large Project application, when you use the filter on the toolbar for graphical scheduling, it does not filter.

Graphical Scheduling

In the Graphical Scheduling - Large Projects application, CPM is not calculating Early Start, Early Finish, Late Start, Late Finish and Float times.

Graphical Scheduling - Large Project

In the Graphical Scheduling Large Project application, when you create a schedule and then click New Row inside of Restrict Resources query, there are no data objects to select.

Graphical Scheduling

In the Graphical Scheduling application, in the Additional Resources section, when you add a new row a new row is not added.

Graphical Scheduling

In the Graphical Scheduling application, it is not possible to filter and select multiple data objects using the Filter action.

Graphical Scheduling

In the Graphical Scheduling application, on the Compliance tab, the Dashboard tab should not be displayed.

Graphical Scheduling

In the Graphical Scheduling application, on the Graphical view, when you change the status on selected work, all records are refreshed instead of just the selected records.

Graphical Scheduling

In the Graphical Scheduling application, once you use the filter on the toolbar for a graphical scheduling project, the other actions on the toolbar do not work.

Graphical Scheduling

In the Graphical Scheduling application, right-clicking in the project row produces a message that tells you that an unknown error has occurred.

Graphical Scheduling

In the Graphical Scheduling application, the Revert Changes button takes you back to the original state but the blue italic modify indicator does not display.

Graphical Scheduling

In the Graphical Scheduling application, the Rolling Project action takes a long time to open.

Graphical Scheduling

In the Graphical Scheduling application, the duration column is not displaying correctly.

Graphical Scheduling

In the Graphical Scheduling application, the duration of higher level work orders is calculated inconsistently depending on the operation you do on the Gantt View tab.

Graphical Scheduling

In the Graphical Scheduling application, the modified date is not displayed correctly.

Graphical Scheduling

In the Graphical Scheduling application, when Service Provider applications are used for multiple sites, data is displayed from the wrong site.

Graphical Scheduling

In the Graphical Scheduling application, when you add a filter and select the refresh action, the filter section is collapsed.

Graphical Scheduling

In the Graphical Scheduling application, when you do a calculation on long duration work, the calculation period is incorrect.

Graphical Scheduling

In the Graphical Scheduling application, when you drag and drop, the Gantt bar disappears.

Graphical Scheduling

In the Graphical Scheduling application, when you expand rows, all rows are expanded rather than the selected ones.

Unassigned

In the Graphical Scheduling application, when you expend the Resource in the Graphical View, the Tool Availability does not appear.

Graphical Scheduling

In the Graphical Scheduling application, when you move a column, headers are misaligned.

Graphical Scheduling

In the Graphical Scheduling application, when you publish a Graphical Assignment record, the Last Published date is not available.

Graphical Scheduling

In the Graphical Scheduling application, when you setup the Graphical Scheduler Compliance functionality and select the Activate Cron checkbox, the two compliance crons, SKDComplianceStartCronTask and SKDComplianceFinishCronTask do not get instances created in their respective crons in Cron Task application

Inventory Counting

In the Inspection application, when you update the length of the ORGID field, the length of the ORGID field in the Asset application is not updated.

Locations

In the Locations application, if there is a record that is linked to a polyline feature with points that have the same X or Y coordinates, features are not displayed due to any divide by zero operation. Values should be checked for zeroes before the operation is done, so that the features can be displayed correctly.

OSLC Providers

In the OSLC Providers application, when you view an image on a record, the image is not displayed.

Work Order Tracking

In the Work Order Tracking application, the Assignment Location section does not display the correct end date or duration.

Work Order Tracking

In the Work Order Tracking application, the Interruptible field is missing in children work orders.

System Object Security Scans

Security defect, CVE-2017-12626; CVSS Base Score: 4.3; CVSS Temporal Score: See https://exchange.xforce.ibmcloud.com/vulnerabilities/138361 for the current score.

System Object Security Scans

Security vulnerability: Apache issue.  CVE-2016-1000031; CVSS Base Score: 9.8; CVSS Temporal Score: See https://exchange.xforce.ibmcloud.com/vulnerabilities/117957 for the current score.

System User Interface

When you delete a record from a duplicate record, the attachment on the original record is also deleted.

Linked Documents/Attached Documents

When you delete an Added From Library attachment, the main library attachment file is deleted from the Doclinks folder.

Workflow Administration

When you upgrade a work flow from the old workflow designer to the new workflow designer, the work flow processes are difficult to read and use.

Database Configuration

In the Database Configuration application, if you update the ORGID length, some attributes are not updated due to a missing ORGID same as relationship.