News
Abstract
IBM® API Connect v10.0.1.9 is now available.
Content
IBM® API Connect v10.0.1.9 delivers enhanced capabilities for the market-leading IBM® API Management solution. This update includes important internal development and field reported fixes as defined below.
For more information about API Connect v10.0.1.9, see API Connect IBM® Knowledge Center "What's New"
For new deployments: You can do a full installation that uses 10.0.1.9
When upgrading from API Connect v10.0.1.2 or greater on VMware:There are no special considerations required. Apply 10.0.1.9. Follow the instructions here. The steps apply when upgrading from v10.0.1.2 (with or without ifixes) to v10.0.1.9.
When upgrading from API Connect v10.0.1.1 or earlier: Read the following section:
- Special note when API Connect v10.0.1.1 or earlier is deployed that uses Virtual Appliances (OVAs) on VMware: v10.0.1.6 includes virtual appliances with a newer version of the operating system that requires a version migration to new virtual appliances. This procedure must be completed to move your product data. If the deployment is on v10.0.1.2 or greater this method does not apply. If you are performing a fresh installation of v10, it is highly recommended you begin with the latest delivery of v10.
- Special note when API Connect v10.0.1.1 or earlier is deployed on OpenShift v4 or any other Kubernetes platforms: Due to changes in Kubernetes operator, you must first upgrade to 10.0.1.2-ifix2, and then apply v10.0.1.5. Find information on upgrading to v10.0.1.2-fix2
Read the following section for special updates regarding moving from API Connect v2018 to v10:
- Upgrading from API Connect v2018 to v10 can be accomplished using specific combinations of v2018.4.1.17 or above and v10.0.1.x.
- For deployments on Kubernetes: An in-place upgrade path is available. To move to v10.0.1.5, v2018 must first be at v2018.4.1.17 or above, and Kubernetes must be at a version supported by v10.0.1.5 (see system requirements in IBM® Compatibility Reports.). See details here
- For deployments on VMware: A version migration path is available, where data is backed up from v2018 virtual appliances (OVAs) and data is restored into new v10.0.1.5 virtual appliances (OVAs) deployed separately. During the migration process, v2018 virtual appliances must be powered off. The gateways may remain powered on during the upgrade process of Manager, Portal, and Analytics subsystems. To move to v10.0.1.5, v2018 must first be at v2018.4.1.17 or above. See the IBM® Knowledge Center page for detailed instructions. More storage is required on v2018 OVAs during the upgrade process to perform the backup. See requirements here
- Find planning and overview materials related to moving from v2018 to v10 at API Connect: Upgrade Central
API Connect v10.0.1.9 contains all field APARs included in v10.0.1.8 as well as the following field reported APARs:
| APAR | Summary |
| LI82739 | PRESERVE V4-NOMAP-EMULATION API PROPERTY FOR INVOKE_1.5.0 POLICY USAGE |
| LI82472 | POSTGRES FREQUENTLY LOGGING: Exception during execution of long running task copy_logical_slots |
| LI82807 | DISABLING FORUM MODULE, DISABLES THE APPLICATION PAGE VIEW ON PORTAL |
| LI82805 | CUSTOMED EMAIL ADDRESS IS NOT USED IN PASSWORD CHANGED EMAIL (NOT CONSISTENT) |
| LI82799 | PORTAL SHOULD REQUEST NEW CLIENT ID/SECRET IF APIM REFUSES TO AUTH WITH THE EXISTING ONES |
| LI82797 | ?WSDL RETURNS INCORRECT URL IN LOCATION |
| LI82788 | MULTI SITE HA PORTAL CLUSTERS FAILS TO BOOTSTRAP IF DB-1 POD IN THE ACTIVE DC GETS STUCK IN PASSIVE MODE |
| LI82786 | APIC INVOKE POLICY DEFAULT PARAMETER CONTROL SHOULD BE AN EMPTY ALLOWLIST |
| LI82784 | INVALID IS REQUIRED PROPERTY ADDED TO YAML DEFINITION WHEN BROWSING AN API. |
| LI82783 | RESTORE FAILS FOR S3 DISASTER RECOVERY |
| LI82781 | BACKUP_PORTAL SHOULD ONLY RUN IN THE ACTIVE DC IN 2DC MODE |
| LI82780 | ROLES ALLOWED IN CATALOG SETTING SHOULD BE THE ONLY ONES ALLOWED WHEN EDITING ROLE OF CONSUMER ORG USER. |
| LI82778 | TASK CANNOT BE REJECTED WITH USER DIFFERENT FROM ORIGINATOR LEADS TO 403 ERROR |
| LI82777 | REJECTING THE SUBSCRIPTION APPROVAL TASK LEADS TO A 504 GATEWAY TIMEOUT ERROR |
| LI82774 | [10.0.18]: MESSAGE CORG OWNER/PORG OWNER IN PLAIN TEXT FORMAT FAILS WITH (REQUEST) MUST NOT HAVE ADDITIONAL PROPERTIES (ADDITION |
| LI82769 | DR FAILOVER ERRORS WHEN SUBSYSTEM IS NOT READY. |
| LI82755 | API'S ARE VISIBLE IN API MANAGER. BUT IT GETS NOT VISIBLE IN PORTAL |
| LI82747 | API EXPLORER NEEDS TO DEREFERENCE RESPONSE OBJECTS CORRECTLY |
| LI82745 | LINKS IN E-MAIL NOTIFICATION (SUBSCRIPTION APPROVAL WORKFLOW) FOR PORTAL USERS NOT WORKING |
| LI82722 | V5 TO V10 MIGRATION : COULD NOT FIND AN OAUTH PROVIDER USING BASEPATH THAT WAS CALCULATED FROM TOKEN URL DURING AMU ARCHIVE:UNPA |
| LI82715 | RESTRICTED VISIBILITY DOESN'T WORK IN PORTAL |
| LI82761 | SUPPORT JWT GRANT TYPE FOR OAUTH PROVIDER |
| LI82812 | APIS WITH CONTROL CHARACTERS IN THE SWAGGER DOCUMENT CANNOT BE UNPACKED DURING MIGRATION |
| LI82676 | API GATEWAY APIS WITH V5 EMULATED CUSTOM POLICIES REFERENCING OAUTH CONTEXT VARIABLES WILL FAIL |
| LI82794 | POLICY VALIDATION IN `CATCH` BLOCK IS BROKEN |
| LI82787 | WHEN SELF SERVICE ONBOARDING IS DISABLED ONLY ADMIN CAN USE THE DEVELOPER PORTAL |
| LI82740 | PUBLISHING PRODUCT OVERRIDES THE CUSTOM VISIBILITY TO PUBLIC AND SUBSCRIBE TO AUTHENTICATED |
| LI82737 | THE PORTAL BACKUP STATUS BECOMES WARNING |
| LI82728 | AUDIT MESSAGES WITH DBCS CHARACTERS MAY BE SPLIT INTO 2 LINES |
| LI82721 | Portal sites upgrade fails due to invalid translation language code. |
| LI82720 | DEV PORTAL CONTENT AUTHOR DOES NOT SEE UNPUBLISHED ARTICLES IN VIEW |
| LI82711 | DEV PORTAL CONTENT AUTHOR DOES NOT SEE UNPUBLISHED ARTICLES IN VIEW |
| LI82710 | MAIL SUBSCRIBERS WIZARD ERRORS ON USE |
| LI82708 | UPLOADING CERTS TO TRUSTSTORE VIA API |
| LI82678 | UNABLE TO ACCESS FILES IN SPECIFIC DEVELOPER PORTAL VIEW |
Downloads:
Full installation files for IBM® API Connect v10.0.1.9 can be downloaded with proper entitlement from Fix Central.
| Description – Filename | Date Published |
|
IBM® API Connect Analytics v10.0.1.9 for VMWare
|
22 Nov 2022 |
|
IBM® API Connect Local Test Environment v10.0.1.9
|
22 Nov 2022 |
|
IBM® API Connect Local Test Environment v10.0.1.9 for Linux
|
22 Nov 2022 |
|
IBM® API Connect Local Test Environment v10.0.1.9 for OSX
|
22 Nov 2022 |
|
IBM® API Connect Local Test Environment v10.0.1.9 for Windows
|
22 Nov 2022 |
|
IBM® API Connect v10.0.1.9 for Containers
|
22 Nov 2022 |
|
IBM® API Connect Operator Release Files v10.0.1.9 for Containers
|
22 Nov 2022 |
|
IBM® API Connect Operator Upgrade Release Files v10.0.1.9 for Containers
|
22 Nov 2022 |
|
IBM® API Connect Install Assist v10.0.1.9 for Linux®
|
22 Nov 2022 |
|
IBM® API Connect Install Assist v10.0.1.9 for Mac
|
22 Nov 2022 |
|
IBM® API Connect Install Assist v10.0.1.9 for Windows
|
22 Nov 2022 |
|
IBM® API Connect Management v10.0.1.9 for VMWare
|
22 Nov 2022 |
|
IBM® API Connect Developer Portal v10.0.1.9 for VMWare
|
22 Nov 2022 |
|
IBM® API Connect Toolkit v10.0.1.9 for Linux®
|
22 Nov 2022 |
|
IBM® API Connect Toolkit Designer with Loopback v10.0.1.9 for Linux®
|
22 Nov 2022 |
|
IBM® API Connect Toolkit Designer with Loopback v10.0.1.9 for Mac
|
22 Nov 2022 |
|
IBM® API Connect Toolkit Designer with Loopback v10.0.1.9 for Windows
|
22 Nov 2022 |
|
IBM® API Connect Toolkit with Loopback v10.0.1.9 for Linux®
|
22 Nov 2022 |
| IBM® API Connect Toolkit with Loopback v10.0.1.9 for Mac | 22 Nov 2022 |
| IBM® API Connect Toolkit with Loopback v10.0.1.9 for Windows | 22 Nov 2022 |
|
IBM® API Connect Toolkit v10.0.1.9 for Mac
|
22 Nov 2022 |
|
IBM® API Connect Toolkit v10.0.1.9 for Windows
|
22 Nov 2022 |
|
IBM® API Connect Analytics v10.0.1.9 Upgrade File
|
22 Nov 2022 |
|
IBM® API Connect Management Server Upgrade File v10.0.1.9
|
22 Nov 2022 |
|
IBM® API Connect v10.0.1.9 Portal Upgrade File
|
22 Nov 2022 |
|
IBM® API Connect script and assets required for v10->v10.0.1.9 side-by-side upgrades
|
22 Nov 2022 |
|
IBM® API Connect scripts and assets required for v2018->v10.0.1.9 side-by-side upgrades
|
22 Nov 2022 |
|
IBM® API Connect Security Signature Bundle File v10.0.1.9
|
22 Nov 2022 |
IBM API Connect Control Plane for OVA upgrades
When upgrading on VMWare the following Control Plane files may be required to be downloaded and installed to bring Kubernetes to a supported release level. For more details, see Step 4 of the Upgrade Instructions in the API Connect IBM Documentation.
When upgrading on VMWare the following Control Plane files may be required to be downloaded and installed to bring Kubernetes to a supported release level. For more details, see Step 4 of the Upgrade Instructions in the API Connect IBM Documentation.
| Description – Filename | Date Published |
|
IBM API Connect 10.0.1.9 Control Plane File for OVA (optional)
|
22 Nov 2022 |
API Connect v10.0.1.9-R2 Migration Utility
| Description – Filename | Date Published |
|
IBM® API Connect Migration Utility v10.0.1.9-R2
|
14 Dec 2022 |
[{"Line of Business":{"code":"LOB45","label":"Automation"},"Business Unit":{"code":"BU059","label":"IBM Software w\/o TPS"},"Product":{"code":"SSMNED","label":"IBM API Connect"},"ARM Category":[{"code":"a8m50000000L0rvAAC","label":"API Connect"}],"ARM Case Number":"","Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"All Version(s)"}]
Was this topic helpful?
Document Information
Modified date:
14 December 2022
UID
ibm16825013