Maintaining and Upgrading the TS7650G (Gateway), ProtecTIER V3.4.3
The topics in this section provide information about maintaining and upgrading the TS7650.
- Overview of upgrading a TS7650G (Gateway) server to ProtecTIER V3.4.3
This document provides instructions for upgrading servers that are running any ProtecTIER version 3.4.x to the latest available of ProtecTIER 3.4 branch. This document also provides instructions for upgrading servers that are running ProtecIER version 3.3.x to the latest available version of ProtecTIER 3.4 branch. - Detaching the TSSC
Instructions for detaching the TSSC microcode when replacing 3958 DD4, and 3958 DD5 servers with 3958 DD6. - Reimaging the TSSC microcode for the TS7650G (Gateway)
Instructions for checking the TSSC microcode level and reimaging the microcode, if required. - Upgrading ProtecTIER Manager on the TS7650G (Gateway)
Use these procedures to upgrade the version of ProtecTIER® Manager on the TSSC or ProtecTIER Manager workstation. - Upgrading the ProtecTIER software to 3.4.x from version 3.3.x using ProtecTIER Manager
This information helps you use the ProtecTIER Manager to upgrade ProtecTIER servers to version 3.4.x from version 3.3.x. - Upgrading the ProtecTIER software to 3.3.x from version 3.1.8 or higher using ProtecTIER Manager
This information helps you use the ProtecTIER Manager to upgrade ProtecTIER servers to version 3.3.x from version 3.1.8 or higher. - Upgrading the ProtecTIER software to 3.4.x from version 3.3.x using the ProtecTIER Service Menu
You can use the ProtecTIER service menu to upgrade ProtecTIER servers to version 3.4.x from version 3.3.x. - Upgrading Red Hat Linux and ProtecTIER version 3.4.x for servers at version 3.3.x
This information provides instructions for upgrading Red Hat Linux and ProtecTIER on existing servers at ProtecTIER version 3.3.x. - Applying fix packs for ProtecTIER systems already at version 3.4
After the ProtecTIER software is upgraded to version 3.4.0 or higher, you might need to install updates to ProtecTIER for fixes and other updates. These instructions are for upgrading to version 3.4.x. - Recovering from a failed upgrade
Use these procedures to upgrade to ProtecTIER version 3.4.x from version 3.3.x using the ProtecTIER graphical user interface (GUI) or ProtecTIER Service menus. - Checking the ProtecTIER version on the TS7650G (Gateway) server for servers at ProtecTIER version 3.1.8 or higher
This appendix describes several ways to check the ProtecTIER version on a ProtecTIER server using the command line interface (CLI), the service menu or the graphical user interface (GUI). After you obtain the ProtecTIER version, verify that the package that you are applying is a higher version than the currently installed ProtecTIER version. - Company information worksheet
- TS7600 Upgrade Matrix
This topic provides new installation and upgrade information for all releases. - Additional procedures
The PDFs in this section provide additional procedures for replacing servers and Engineering instructions for the TS7650.