TS7600 Upgrade Matrix
This topic provides new installation and upgrade information for all releases.
New installation* | |||||||
---|---|---|---|---|---|---|---|
Configuration / Version | 2.2 | 2.3 | 2.4 | 2.5 | 3.1 | 3.1.8, 3.1.9, 3.1.10 | 3.2 |
DD11 | Yes | No | No | No | No | No | No |
DD33, 11 | No | Yes | Yes | No | No | Yes7 | Yes7 |
DD4 VTL | No | No | No | Yes | Yes7 | Yes7 | Yes7 |
DD4 OST | No | No | No | Yes | Yes7 | Yes7 | Yes7 |
DD5 VTL | No | No | No | No | No | No | Yes |
DD5 OST | No | No | No | No | No | No | Yes |
DD5 FSI | No | No | No | No | No | No | Yes |
SM1 VTL | No | No | Yes (called v2.1) | Yes | Yes | Yes | Yes |
SM1 OST | No | No | No | Yes | Yes | Yes | Yes |
SM2 VTL | No | No | No | No | No | No | Yes |
SM2 OST | No | No | No | No | No | No | Yes |
AP1 DD3 VTL11 | No | Yes | Yes | No | No | Yes7 | Yes7 |
AP1 DD4 VTL | No | No | No | Yes | Yes7 | Yes7 | Yes7 |
AP1 DD4 OST | No | No | No | Yes | Yes7 | Yes7 | Yes7 |
Generic | Yes | Yes | Yes | Yes5 | Yes5, 7 | Yes5, 7 | Yes5, 7 |
Upgrade to version* | ||||||
---|---|---|---|---|---|---|
Configuration / Version | 2.3 | 2.44 | 2.5 | 3.1 | 3.1.8, 3.1.9, 3.1.10 | 3.29 |
DD11, 12 | Yes (must upgrade to 2.2 previously) | Yes (must upgrade to 2.3 previously)8 | Yes (must upgrade to 2.4 previously) | Yes (must upgrade to 2.4 or 2.5 previously)6 | Yes (must upgrade to 2.4, 2.5, or 3.1 previously) | Yes (must upgrade to 2.4, 2.5, 3.1, or 3.1.8 previously) |
DD311 | Yes | Yes (must upgrade to 2.3 previously) | Yes (must upgrade to 2.4 previously)2 | Yes (must upgrade to 2.4 or 2.5 previously)2 | Yes (must upgrade to 2.4, 2.5, or 3.1 previously) | Yes (must upgrade to 2.4, 2.5, 3.1, or 3.1.8 previously) |
DD4 VTL | No | No | DD4 used only from 2.5 | Yes | Yes | Yes |
DD4 OST | No | No | OST released only from 2.5, DD4 used only from 2.5 | Yes | Yes | Yes |
DD5 VTL | No | No | No | No | No | DD5 only used from 3.2 |
DD5 OST | No | No | No | No | No | DD5 only used from 3.2 |
DD5 FSI | No | No | No | No | No | DD5 only used from 3.2, FSI released only from 3.2 |
SM1 VTL | No | SM1 used only from 2.4 (called v2.1) | Yes | Yes (must upgrade to 2.5 previously) | Yes (must upgrade to 2.5 or 3.1 previously) | Yes (must upgrade to 2.5, 3.1, or 3.1.8 previously) |
SM1 OST | No | No | OST released only from 2.5 | Yes | Yes | Yes |
SM2 VTL | No | No | No | No | No | SM2 used only from 3.2 |
SM2 OST | No | No | No | No | No | SM2 used only from 3.2 |
AP1 DD3 VTL11 | Yes | Yes (must upgrade to 2.3 previously) | Yes (must upgrade to 2.4 previously)2 | Yes (must upgrade to 2.4 or 2.5 previously)2 | Yes (must upgrade to 2.4, 2.5, or 3.1 previously) | Yes (must upgrade to 2.4, 2.5, 3.1, or 3.1.8 previously) |
AP1 DD4 VTL | No | No | DD4 used only from 2.5 | Yes | Yes | Yes |
AP1 DD4 OST | No | No | DD4 used only from 2.5, OST released only from 2.5 | Yes | Yes | Yes |
Generic | Yes | Yes (must upgrade to 2.3 previously) | Yes (must upgrade to 2.4 previously)5 | Yes (must upgrade to 2.4 or 2.5 previously)5, | Yes (must upgrade to 2.4, 2.5, or 3.1 previously)5 | Yes (must upgrade to 2.4, 2.5, 3.1, or 3.1.8 previously)5 |
Grid Manager level should be higher than or equal to ProtecTIER code level. ProtecTIER Manager level should be higher than or equal to the Grid Manager level.
Note:
* In general, use the latest release within the upgrade version as installation issues might have been resolved.
- Before enabling replication on DD1, an additional Ethernet card must be installed on the server. Enabling replication is recommended before upgrading to 3.1.
- RAS can not be configured on DD3 in 2.5 or 3.1. Either configure on 2.4 before upgrading it to a higher version or upgrade to 3.1.8 or higher, and then configure RAS.
- It is recommended to create repository under 2.4.
- Red Hat OS must be upgraded to v5u4.
- Qualified Emulex HBA cards must be provided as per Support Matrix.
- DD1 with only 4 ethernet ports will fail to upgrade using v3.1.0.X. Use v3.1.1.X or above instead.
- Use the ptconfig (not "menu" but manual ptconfig) option -oldclusterkit when using the old cluster kit on 3.1 and newer versions (FC 3447).
- RAS must be configured on 2.3 before upgrading to 2.4.
- Red Hat OS must be upgraded to v5u6.
- The "3.1.8" column in the above tables represents all codes from 3.1.8 and higher (3.1G versions), which is lower than 3.2.
- OST isn't supported on DD3, only VTL.
- Upgrading a DD1 machine to 3.2 code is supported only when an additional Ethernet card is installed on the server (with 2 extra ethernet ports).