Product Documentation
Abstract
System parts listing for the IBM BladeCenter HS20
Content
Move the pointer over the part for a description. Click the part to locate the part number.
Notes:
- Replacement part numbers (Ns) must be serviced only by qualified field service technicians. Customer replaceable units (CRUs) can be replaced by the customer.
- If your specific model is not listed, please use the Quick path feature on the right-nav, and refer to the product description. Look for the "Based on" model.
- This parts listing supports the IBM eServer BladeCenter HS20 - Type 8678 models 21X, 2ZZ, 41X, 4TG, 4TX, 4UG, 4UX, 4VX, 4WX, 4YX, 4ZX, 51X, L1X, M1X
| Item | Description | Replacement part number | CRU |
|---|---|---|---|
| 1 | Microprocessor | ||
| 2GHz/400MHz (512KB) with heatsink (model 21X) | 59P6617 | CRU | |
| 2.4GHz/400MHz (512KB) with heatsink (model 41X) | 59P6619 | CRU | |
| 2.6GHz/400MHz (512KB) with heatsink (model 51X) | 73P5984 | CRU | |
| 2.8GHz/400MHz (512KB) with heatsink (model 61X) | 73P5985 | CRU | |
| 2 | Heatsink | ||
| (models 21X, 41X) | 49P2611 | ||
| (models 51X, 61X, L1X, M1X) | 49P2513 | ||
| 3 | Memory module | ||
| 256MB PC2100 ECC (all models) | 09N4306 | CRU | |
| 512MB PC2100 ECC | 09N4307 | CRU | |
| 1GB PC2100 ECC | 09N4308 | CRU | |
| 256MB Non-ChipKill (2 per on models L1X, M1X) | 73P2872 | CRU | |
| 2GB PC2100 ECC (models L1X, M1X) | 09N4309 | CRU | |
| 4 | Retention module | ||
| (models 21X, 41X, L1X, M1X) | 49P2633 | ||
| 5 | Microprocessor heat sink filler | ||
| (all models) | 49P2609 | CRU | |
| 6 | System board | ||
| (all models) | 73P6042 replaces 73P9121 replaces 59P6610 | ||
| 7 | Chassis (base blade) | ||
| (all models) | 90P4713 replaces 49P2658 | ||
| 8 | Front bezel, with customer CD | ||
| (all models) | 59P6631 | CRU | |
| 9 | Terminator card | ||
| (all models) | 59P6614 | CRU | |
| 10 | Cover with label | ||
| (all models except L1X, M1X) | 49P2612 (CRU) | CRU | |
| (models L1X, M1X) | 02R9149 (CRU) | CRU | |
| . | Hard disk drive, 40GB 5400rpm 2.5 inch | ||
| (all models) | 19K1693 | CRU | |
| . | IDE interposer and hard disk drive tray | ||
| (all models) | 59P6630 | CRU | |
| . | Filler, hard disk drive filler | ||
| (all models) | 19K1291 | CRU | |
| . | Blade storage expansion | ||
| (all models) | 13N2635 replaces 90P4769 replaces 59P6632 | CRU | |
| . | Blade storage expansion base | ||
| (all models) | 49P2554 | CRU | |
| . | Battery, 3.0 volt | ||
| (all models) | 33F8354 | CRU | |
| . | System service label | ||
| (all models) | 25K8253 | CRU | |
| Miscellaneous parts | |||
Kit includes:
| 02R9003 | ||
| . | Single wide blade front | ||
| (models L1X, M1X) | 90P4766 | ||
| . | Module filler | ||
| (models L1X, M1X) | 49P2518 | ||
| . | Fibre Channel card mount tray | ||
| (models L1X, M1X) | 49P2514 | ||
| . | Blade filler | ||
| (models L1X, M1X) | 49P2517 | ||
| . | Power supply | ||
| 1800W (models L1X, M1X) | 74P4401 | CRU | |
| . | Power supply filler | ||
| (models L1X, M1X) | 49P2519 | ||
| . | Chassis | ||
| (models L1X, M1X) | 49P2520 | ||
| . | SPC chassis | ||
| (models L1X, M1X) | 49P2530 | ||
| . | BladeCenter service label | ||
| (models L1X, M1X) | 49P2543 | ||
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU056","label":"Miscellaneous"},"Product":{"code":"HW19V","label":"BladeCenter HS20"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"LOB18","label":"Miscellaneous LOB"}}]
Was this topic helpful?
Document Information
Modified date:
14 April 2023
UID
ibm1MIGR-46396