IBM Support

IBM® API Connect v10.0.1.2-ifix2 is now available

News


Abstract

IBM® API Connect V10.0.1.2-ifix2 is now available. This update includes important internal development and field reported fixes.

Content

IBM® API Connect v10.0.1.2-ifix2 delivers enhanced capabilities for the market-leading IBM® API Management solution. In addition to the ability to deploy in complex, multi-cloud topologies, this update introduces more upgrade capability from v2018.  

For more information about API Connect v10.0.1.2-ifix1, see API Connect IBM® Knowledge Center  "What's New" 

Read the following section for special updates regarding upgrading from earlier versions of API Connect v10 

  • Special note when API Connect v10 is deployed that uses Virtual Appliances (OVAs) on VMware v10.0.1.2-ifix2 includes virtual appliances with a newer version of the operating system that does not allow for in-place upgrade of the virtual appliances.  If you are performing a fresh installation of v10, it is highly recommended you begin with v10.0.1.2-ifix2. New v10.0.1.2-ifix2 virtual appliances must be deployed after you upgrade from any previous v10.x.x.x (except v10.0.1.2 and v10.0.1.2-ifix1) level deployed on VMware. This procedure must be completed to move your product data.
  • Special note when API Connect is deployed on OpenShift v4.x:  Due to changes in Kubernetes operator, a workaround is needed after v10.0.1.0 to v10.0.1.2-ifix2 upgradeThis workaround has no downtime.  See IBM® Knowledge Center page. This method is also applicable for IBM® Cloud Pak for Integration clients upgrading from version 2020.3.1 (API Connect v10.0.1.0) to 2020.4.1 EUS, which allows upgrade of API Connect to v10.0.1.2-ifix2.  See the following IBM® Knowledge Center page. If you are already on v10.0.1.2-ifix2, this issue is not seen.  If you are not on OpenShift, this issue is not applicable.
  • Special note: For more information about upgrading from v10.0.1.2 to v10.0.1.2-ifix2, see following links
    • Upgrade from v10.0.1.2 to v10.0.1.2-ifix2 on VMware
    • Upgrade API Connect from v10.0.1.2 to v10.0.1.2-ifix2 on native Kubernetes
    • Upgrade API Connect from v10.0.1.2 to v10.0.1.2-ifix2 on OpenShift
For clients upgrading from API Connect v2018.4.1.15
 
  • For deployments on Kubernetes:  An in-place upgrade path is available.  To upgrade to v10.0.1.2-ifix2, v2018 must first be at v2018.4.1.15, and Kubernetes must be at a version supported by v10.0.1.2-ifix2 (see system requirements in IBM® Compatibility Reports.). See details here
  • New:  For deployments on VMware:  A side-by-side upgrade path is available, where data is backed up from v2018 virtual appliances (OVAs) and restore data into new v10.0.1.2-ifix2 virtual appliances (OVAs) must be deployed separately.  During the upgrade process, v2018 virtual appliances must be powered off. The gateways might not be powered off during the upgrade process of Manager, Portal, and Analytics subsystems. To upgrade to v10.0.1.2-ifix2, v2018 must first be at v2018.4.1.15.  See the IBM® Knowledge Center page for full upgrade instructions. More storage is required on v2018 OVAs during the upgrade process to perform the backup. See requirements here
Note: Upgrade from v10.0.1.2-ifix2 to v10.0.2.0 is not supported
API Connect v10.0.1.2-ifix2 contains the following field reported APARs:
APAR Summary
LI81307 UPGRADE SERVER SSH KEY TO BE MORE THAN 1024 BITS
LI81533 RETIRING OR REMOVING A PRODUCT FROM APIC MANAGER UI DOES NOT DELETE API FROM THE PORTAL
LI81721 DUPLICATE APPROVAL EMAILS SENT TO ORG OWNER FOR CANCELED SUBSCRIPTION APPROVAL WHEN CATALOG HAS A SPACE
LI81851 CREATE AN APPLICATION DIALOG TITLE IS NOT TRANSLATED IN THE PORTAL
LI81853 TEST CONNECTION FOR EMAIL SERVER SENDS BLANK PASSWORD ON EDIT
LI81882 PORTAL SESSION IS VALID EVEN AFTER THE BROWSER IS RESTARTED
LI81898 CP4I APIC 10.0.1.0 - AUTOMATIC TLS SECRET REFRESH DID NOT WORK - CERTS EXPIRED AFTER 90 DAYS
LI81906 2 GWS IS ASSOCIATED WITH OTHER ANALYTICS SERVICE, IS TIED TO THE SAME CATALOG, BUT ANALYTICS DATA IS DISPLAYED ON PORTAL.
LI81912 INCOMPATIBILITY OF CATALOG BASED API PROPERTIES COMPARED TO VERSION 5
LI81917 API NOT MASKING PERSONAL DATA
LI81932 SITE MISSING ON PORTAL SYSTEM RESTORE
LI81938 CANNOT DISABLE APPLICATION ON APIM
LI81943 CREDENTIALS CREATION FAILING WHEN APP NAME IN ID FORMAT
LI81944 MIGRATION UTILITY - ADD TOGGLE FOR V5 REQUEST.HEADERS
LI81855 THE VALUE OF CATALOG PROPERTY CANNOT BE EDITED AFTER CREATING
LI81858 JSONWEBTOKEN MODULE DOES NOT TAKE INTO ACCOUNT OF THE JWKS -> X5C FORMAT
LI81890 CONSUMER ORG INVITATION LOGIN FAILURE - OIDC USER REGISTRY
LI81895 'RESEND INVITE' FAILS TO SEND ON CONSUMER ORGANIZATION
LI81966
THE 'DEVELOP' PAGE IS NOT AUTOMATICALLY UPDATED WITH USER CHANGES.
LI81990
PRODUCTS (SUBSCRIPTIONS) NOT LOADING PROPER NUMBERS AT FIRST
LI81936
THE LIST OF PRODUCT PLANS AVAILABLE FOR SUBSCRIPTION MAY APPEAR INACCURATE IN THE API MANAGER UI OR EMPTY
LI81964
NATS-STREAMING-OPERATOR CONTINUOUSLY FAILING TO SCALE STANCLUSTER TO 3 PODS
LI81989
API CONNECT ANALYTICS - RETENTION/ROLLOVER CRON JOB FAILING
LI82002
OOM WHEN RUNNING PORTAL SITE CONTENT REFRESH WHERE DUPLICATE USERS ARE PRESENT.
LI82003
OCP UPGRADE OF APICONNECT FROM 10.0.1.0 TO 10.0.1.1 GETS STUCK
LI82008
SITE RESTORE FAILS DUE TO THE MAX_ALLOWED_PACKET LIMIT
LI82009
RENEW CERTS STEPS CONFUSING
LI82041 CREATING A (SOAP PROXY) USING IBM® API CONNECT FROM MULTIPART WSDL FILE VIA API MANAGER ISSUED AND ERROR
LI82013 Docker CVE-2021-21284 CVE-2021-21285
LI82026 OpenSSL CVE-2020-1971
LI82047
PGBOUNCER CANNOT START DUE TO DNS SERVER ISSUES.
LI82014 Node.js CVEs
LI82062 ABILITY TO DISABLE DEBUG LOGGING IN IBM-APICONNECT OPERATOR POD IN V10.0.1.2
LI82102 API DEFINITION MAY BECOME UNUSABLE WHEN UPGRADING FROM V2018 TO V10
LI82056 Performing more than 1 restore causing WAL files to grow and eventually fill up the disk
LI82059 APIS MAY FAIL AFTER UPGRADE FROM V2018 TO V10
LI82080 REGEX PATTERNS INCORRECTLY MODIFIED DURING UPGRADE FROM 2018 TO V10
LI82099
DOUBLE QUOTES PRESENT WITH ESCAPE SLASHES
LI82128
CONVERSION OF OAUTH PROVIDER FAILS, CAUSING APIS IN CATALOG NOT TO APPEAR IN THE GATEWAY
LI81973 ERROR "413: REQUEST ENTITY TOO LARGE" OCCURS WHILE UPLOADING A CUSTOM THEME ONTO DEVPORTAL VIA CLI
LI82164 HA MODE STUCK IN "PROGRESSING TO ACTIVE" IN ACTIVE NODE
LI82126 MIGRATION TOOL ERROR BUT CONTINUE ON INVALID $REF
LI82133 MIGRATION OF API WITHOUT DEFAULT PROPERTIES FAILS TO PUBLISH
LI82132 MIGRATION ARCHIVE:PUSH COMMAND FAILS FOR SOAP-BASED APIS WHEN WSDL ZIP CONTAINS UNEXPECTED FILES
LI82095 ERROR WHILE REGISTERING DEV PORTAL SERVICE IN CLOUD MANAGER UI.

Downloads:

Full installation files for IBM® API Connect 10.0.1.2-ifix2 can be downloaded from Fix Central :

Description – Filename Date Published
IBM® API Connect v10.0.1.2-ifix2 Analytics for VMWare
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Local Test Environment
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Local Test Environment for Linux
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Local Test Environment for OSX
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Local Test Environment for Windows
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 for Containers
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Operator Release Files for Containers
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Operator Upgrade Release Files for Containers
apiconnect-operator-upgrade-release-files_10.0.1.2-ifix2.zip 
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Install Assist for Linux®
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Install Assist for Mac
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Install Assist for Windows
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Management for VMWare
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Developer Portal for VMWare
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit for Linux®
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit Designer with Loopback for Linux®
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit Designer with Loopback for Mac
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit Designer with Loopback for Windows
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit with Loopback for Linux®
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit with Loopback for Mac
toolkit-loopback-mac_10.0.1.2-ifix2.zip
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit with Loopback for Windows
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit for Mac
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Toolkit for Windows
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Analytics Upgrade File
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Management Server Upgrade File
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 Portal Upgrade File
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 script and assets required for v10->v10.0.1.2 side-by-side upgrades
23 March 2021
IBM® API Connect v10.0.1.2-ifix2 scripts and assets required for v2018->v10.0.1.20-ifix1 side-by-side upgrades
06 May 2021
IBM® API Connect v10.0.1.2-ifix2 Security Signature Bundle File
06 May 2021
API Connect v10.0.1.1 Migration Utility
Description – Filename Date Published
IBM® API Connect Migration Utility v10.0.1.2
25 June 2021

[{"Line of Business":{"code":"LOB36","label":"IBM Automation"},"Business Unit":{"code":"BU053","label":"Cloud \u0026 Data Platform"},"Product":{"code":"SSMNED","label":"IBM API Connect"},"ARM Category":[{"code":"a8m50000000L0rvAAC","label":"API Connect"}],"ARM Case Number":"","Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"All Version(s)"}]

Document Information

Modified date:
22 July 2021

UID

ibm16445859