Management interface messages
Use this section to locate additional information about TS7700 Management Interface error messages. Error codes associated with these messages begin with the identifier HYDME.
Expand the Management interface messages parent topic in the left navigation pane to view the complete list of HYDME error codes.
- HYDME0001W
You may experience degraded performance during the insert operation since some clusters are in Service mode, offline, or are in the process of going offline or coming online. - HYDME0002W
You may experience degraded performance during the delete operation since some clusters are in Service mode, offline, or are in the process of going offline or coming online. - HYDME0003E
An error occurred while repairing virtual volumes. - HYDME0004I
The command to repair the specified virtual volumes has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME0005E
You are not authorized to repair damaged virtual volumes. - HYDME0006E
You are not authorized to view the damaged virtual volume details page. - HYDME0007I
Select at least one virtual volume to repair. - HYDME0008I
The number of virtual volumes that can be repaired at one time is 10. Select 10 virtual volumes and submit the repair action again. - HYDME0009I
The query for ranges did not complete. - HYDME0010I
You are not authorized to move physical volumes. - HYDME0011I
There are more than 100 volume ranges between volser and volser. Only the first 100 volume ranges are displayed. - HYDME0012I
Entry is required. - HYDME0013E
Entry is invalid. The value that you enter must be number characters in length. - HYDME0014I
An invalid character was entered. Only characters [A-Z] and numerals [0-9] are valid. - HYDME0015I
The virtual volume specified is in the damaged category. Click the View Damaged Virtual Volume Details button to view the state of the virtual volume. - HYDME0016I
The cancel request failed because of an internal error. The operation cannot be canceled at this time. - HYDME0017I
The domain must be in a healthy state in order to repair virtual volumes. The repair process will fail because one of the clusters is either offline or in Service mode. - HYDME0018I
Data cannot be retrieved for the specified virtual volume because the volume is in the damaged category. - HYDME0019I
Unable to query cluster cluster: the cluster is currently in Service mode. - HYDME0020I
Are you sure you want to remove user user? Once removed, this user will no longer have access to any clusters within the grid. - HYDME0021I
Are you sure you want to remove user user (role)? Once removed, this user will no longer have access to any clusters within the grid. - HYDME0022I
User user (role) has been removed from the grid. - HYDME0024I
User user has been removed from the grid. - HYDME0025I
A selection from comboBox is required. - HYDME0026I
Enter a number between and . - HYDME0027I
The command to move physical volumes volser has successfully been issued. Click the View Tasks button to check the status of the move operation or monitor the progress on the Tasks pod. - HYDME0028I
The command to move physical volumes volser could not be issued. - HYDME0029I
The command to move the scratch physical volumes volser has successfully been issued. Click the View Tasks button to check the status of the move operation or monitor the progress on the Tasks pod. - HYDME0030E
The username entered is invalid. A username must be number to number characters in length, cannot include the tab character, or use a space as the last character. - HYDME0032E
The password entered is invalid. - HYDME0034E
Password confirmation failed. - HYDME0038E
The username user is already taken. Enter a different username. - HYDME0039E
You are not authorized to insert virtual volumes. - HYDME0040E
You are not authorized to delete virtual volumes. - HYDME0041I
The command to insert the specified virtual volumes has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME0042E
An error occurred while inserting virtual volumes. - HYDME0043E
The value entered is invalid. - HYDME0044I
The command to delete the specified virtual volumes has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME0045E
An error occurred while deleting virtual volumes. - HYDME0046E
Start and end VOLSERs must adhere to the same format. - HYDME0047E
The VOLSER range entered is invalid. - HYDME0048E
The message could not be retrieved from the resource bundle. - HYDME0049E
The account credentials are not valid. - HYDME0050E
The target namespace does not exist. - HYDME0051E
One or more parameter values entered into the method were invalid. - HYDME0052E
The specified class does not exist. - HYDME0053E
The requested object could not be found. - HYDME0054E
The requested operation is not supported. - HYDME0055E
The operation cannot be carried out on this class because instances of this class exist. - HYDME0057E
The specified superclass does not exist. - HYDME0058E
The object being created already exists. - HYDME0059E
The specified property does not exist. - HYDME0060E
The value supplied is incompatible with the type. - HYDME0061E
The query language is not recognized or supported. - HYDME0062E
The query is invalid for the specified query language. - HYDME0063E
The extrinsic method could not be run. - HYDME0064E
The specified extrinsic method does not exist. - HYDME0065E
The specified operation is not implemented. - HYDME0066E
An internal error occurred. - HYDME0067E
The specified destination for the asynchronous response is invalid. - HYDME0068E
The specified Namespace is not empty. - HYDME0069E
The connection timed out. - HYDME0072E
An error occurred while retrieving information on the pending updates. - HYDME0073E
An error occurred while retrieving information on immediate deferred updates. - HYDME0074E
The feature license key entered is invalid. - HYDME0075I
Select a feature license to be removed. - HYDME0076I
You are not authorized to eject physical volumes. - HYDME0077I
Are you sure that you want to skip sharing pending updates on cluster cluster with other clusters in the grid? - HYDME0078E
The trap community name is invalid. The name must be between number and number characters. - HYDME0079E
SNMP settings entered are the same as the current values. - HYDME0080I
You cannot delete virtual volumes because all clusters in the grid are either in Service mode, Service Prep mode, or are offline. - HYDME0081I
You currently cannot insert virtual volumes since the selected cluster is either in Service mode, Service Prep mode, or offline. - HYDME0082I
You currently cannot view pending updates since all clusters in the grid are either in Service mode, Service Prep mode, or are offline. - HYDME0083I
You currently cannot view virtual volume details since all clusters in the grid are either in Service mode, Service Prep mode, or are offline. - HYDME0084I
You currently cannot repair virtual volumes since all clusters in the grid are either in Service mode, Service Prep mode, or are offline. - HYDME0085I
SNMP destination to address on port number has been added. - HYDME0086I
The command to move the scratch physical volumes could not be issued. - HYDME0087I
The command to move the quantity of scratch physical volumes has been successfully issued. Click the View Tasks button to check the status of the move operation or monitor the progress on the Tasks pod. - HYDME0088I
The command to move the quantity of scratch physical volumes could not be issued. - HYDME0089I
You have requested to move the physical volume range range. Are you sure you want to continue? - HYDME0090I
The nickname of node node has been changed from name to name. - HYDME0091I
You have requested to move a quantity of number scratch-only physical volumes. Are you sure you want to continue? - HYDME0092I
The command to eject physical volumes volser has successfully been issued. Click the View Tasks button to check the status of the eject operation or monitor the progress on the Tasks pod. - HYDME0093I
The command to eject physical volumes volser could not be issued. - HYDME0094I
The command to eject the scratch physical volumes volser has successfully been issued. Click the View Tasks button to check the status of the eject operation or monitor the progress on the Tasks pod. - HYDME0095I
The command to eject the scratch physical volumes volser could not be issued. - HYDME0096I
The command to eject the quantity of scratch physical volumes has been successfully issued. Click the View Tasks button to check the status of the eject operation or monitor the progress on the Tasks pod. - HYDME0097I
The command to eject the quantity of scratch physical volumes could not be issued. - HYDME0098I
You have requested to eject the physical volume range range. Are you sure you want to continue? - HYDME0099I
You have requested to eject a quantity of number scratch-only physical volumes. Are you sure you want to continue? - HYDME0100I
The entered range does not exist within any of the existing physical volume ranges on the machine. Select the Existing Ranges combo box to view the physical volume ranges on the machine. - HYDME0102I
You cannot move more than number volumes at a time. - HYDME0103I
Select a virtualization node (vNode). - HYDME0104I
The node are not available. An unknown node name was entered in the query. - HYDME0105I
The node are not available. The node is unavailable. - HYDME0106I
The user are not available. The query contained an unknown username. - HYDME0107I
The task are not available. The operation record was not created. - HYDME0108I
The file are not available. An error occurred while accessing the operation file. - HYDME0109I
The task are not available. An error occurred while accessing the operation records. - HYDME0110I
Security settings have been changed for all users in the cluster. - HYDME0111W
Security settings must be updated. - HYDME0112I
The command to add a physical volume range has successfully been issued. - HYDME0113E
An error occurred while adding a physical volume range. - HYDME0114I
The command to modify a physical volume range has successfully been issued. - HYDME0115E
The physical volume range could not be modified. - HYDME0118I
The command to modify the specified virtual volumes has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME0119E
An error occurred while modifying virtual volumes. - HYDME0120I
You are not authorized to modify virtual volumes. - HYDME0121I
The global operation lock cannot be obtained because a copy export operation is in progress. - HYDME0122I
An error occurred while retrieving current availability data across the grid. - HYDME0123I
Unable to retrieve physical location information for the virtual volume from the following clusters: cluster. For more information on the state of these clusters, access the Grid Summary page. - HYDME0124I
SNMP destination to address on port number is modified. - HYDME0125I
Unable to query cluster cluster, the cluster is currently offline. Vary the cluster online and try again. If the problem persists, contact your IBM service representative. - HYDME0126I
Unable to query cluster cluster, the cluster has failed. Verify that the cluster is online. If it is not, vary it online. If the problem persists, contact your IBM service representative. - HYDME0127I
You are not authorized to add or modify a physical volume range. - HYDME0128E
The status check to prepare for copy export recovery has failed. You cannot proceed with the copy export recovery at this time. - HYDME0129I
Select an SNMP destination to continue. - HYDME0130E
The SNMP destination could not be modified. - HYDME0131E
The SNMP destination could not be added. - HYDME0132I
The command to delete the SNMP destination has been successfully issued. - HYDME0133E
The command to retrieve the current SNMP settings failed. - HYDME0134E
The command to retrieve the current SNMP destinations failed. - HYDME0135I
The command to update the SNMP settings was successfully issued. - HYDME0136E
The command to update the SNMP settings failed. - HYDME0137E
The command to delete the SNMP destination failed. - HYDME0138E
SNMP settings were not updated. - HYDME0139E
SNMP settings were stored but internal components were not able to be notified of the changes. - HYDME0140W
The maximum number of number SNMP destinations has been reached. - HYDME0141I
The SNMP community community was successfully tested. - HYDME0142I
The test trap for SNMP community community failed. - HYDME0143E
No destination addresses exist. - HYDME0144E
The SNMP destination IP address and port combination already exist. - HYDME0145I
SNMP destination IP address and port entered are the same as the current values. - HYDME0183E
The received feature code is invalid. - HYDME0184I
The feature license command could not be completed. The license for this instance of the feature could not be activated; it has already been used. - HYDME0185I
The feature license command could not be completed. An error occurred while retrieving feature license information. - HYDME0188I
The feature license command could not be completed. An error occurred while adding feature license information. - HYDME0189I
The feature license command could not be completed. An error occurred while deleting feature license information. - HYDME0190I
The encrypted key does not match the feature license information. - HYDME0191I
A conflicting feature license was found. - HYDME0192I
The required feature license(s) could not be found. Verify the requirements before installing the feature license. - HYDME0193I
The maximum limit of the feature license has been met. - HYDME0194I
The feature license entered is not in the valid feature license list. Verify that the entered code is valid. - HYDME0195I
The feature serial number does not match the machine serial number. Verify that the feature's serial number matches the machine's serial number and that the feature and serial numbers were entered accurately. - HYDME0196I
The node for this feature code does not match the node that this feature is applied to. - HYDME0197I
This feature license is not removable. - HYDME0198I
The feature license was not found. - HYDME0199I
The operation could not be started. The global operation lock cannot be obtained because another global operation is in progress. Check the Tasks page to view the status of the global operation. - HYDME0200I
The operation could not be started. The global operation lock cannot be obtained because another global operation is in progress. - HYDME0201I
Component node is now being activated. - HYDME0202W
Are you sure you want to shut down component node? - HYDME0203I
The operation failed. The global operation lock cannot be obtained because another global operation is in progress. Check the Tasks page for all clusters to view the status of the global operation. - HYDME0204I
The feature license command could not be completed. An error occurred while accessing feature license information. - HYDME0205I
The key you entered was installed correctly but an error occurred while synchronizing all clusters, the synchronization will be performed by the system. - HYDME0206E
You are not authorized to modify a feature license. - HYDME0207E
A record of this operation cannot be made. - HYDME0208I
The cancel request failed. This operation is not in progress. - HYDME0209I
The cancel request failed. This operation may not be canceled. - HYDME0210I
The operation has been canceled successfully. - HYDME0211I
The record no longer exists for this operation. The record was deleted from the database. - HYDME0212E
Error retrieving task data. - HYDME0214I
There is no information for the license key entered. - HYDME0215I
The feature license key entered has been successfully activated for cluster {0}. - HYDME0216I
The entered feature license key cannot be activated in this application. Contact your IBM service representative for assistance activating this feature. - HYDME0217I
The selected licensed feature has been successfully removed from the cluster cluster. - HYDME0218I
The key you entered is marked as expired or used. This particular feature code can only be used once. Try again with a new feature key. - HYDME0219I
The entered feature license key is invalid. - HYDME0220I
There currently are no damaged virtual volumes. - HYDME0222I
At least one cluster in the grid is in Service Prep mode. As a result, Service Prep mode is not available for any other clusters in the grid. - HYDME0224I
This is the only cluster not in Service mode. To put this cluster in Service mode you must take another cluster out of Service mode. - HYDME0225I
Lowering the threshold prevents clusters not in Service mode from running out of cache space. - HYDME0226I
The lower removal threshold will remain enabled until it is canceled or a cluster is placed into Service mode. Use the Tasks page to monitor or cancel the removal process. - HYDME0227I
You have requested to enable the lower removal threshold on disk-only clusters. The selected cluster will retain its normal removal threshold. This will allow disk-only clusters to remove additional volumes that are already copied to other clusters until each cluster's temporary removal threshold has been met. \n\n Are you sure you want to continue? - HYDME0228I
The minimum allocated size to lower threshold is number. There are only number left. - HYDME0229I
The feature license key entered has been successfully activated for cluster cluster. Consider adjusting Premigration Priority Threshold (PMPRIOR) and/or Premigration Throttling Threshold (PMTHLVL) values. - HYDME0233E
You are not authorized to perform stand-alone mounts or demounts. - HYDME0234I
Are you sure that you want to demount virtual drive virtualDrive in the cluster cluster? - HYDME0236I
An unmount operation has been started for VOLSER object on virtual drive object. Refer to the Tasks page or Tasks pod to monitor the unmount status. - HYDME0238I
A mount has been started for virtual volume object on virtual drive object in the object cluster. Refer to the Tasks page or Tasks pod to monitor the mount status. - HYDME0242E
Select a row from the table to perform operation. - HYDME0260I
The cluster id is now coming online. - HYDME0261I
Are you sure you want to take the cluster id offline? - HYDME0262I
The cluster id is being taken offline. - HYDME0263I
Are you sure you want to completely shut down the cluster id? - HYDME0264I
The cluster id is now shutting down. - HYDME0265I
Allow an IBM service representative to connect through physical access if available (recommended). - HYDME0266I
Allow an IBM service representative to connect remotely. - HYDME0267W
No IBM support connectivity option was selected. - HYDME0289E
The TS7700 Management Interface was unable to connect to the server. - HYDME0290E
An internal error occurred while retrieving the object data. - HYDME0291E
An unexpected internal error occurred. - HYDME0292I
One or more custom role(s) have been successfully updated. - HYDME0293E
The page you are attempting to visit was unable to perform the following operation: operation. - HYDME0294I
The account for user user has successfully been modified. - HYDME0295I
User username has been added to the grid. - HYDME0296I
User username has been added to the cluster. - HYDME0297I
At least one other cluster is currently in Service mode or offline. If you place an additional cluster in Service mode, every currently unavailable cluster must be made available before any of them can go online. - HYDME0298I
At least one other cluster is currently in Service mode or offline. Service mode will be canceled but this cluster will not go online until all other clusters are available. - HYDME0299I
You have submitted a request to put the TS7700 cluster Cluster into mode mode. The TS7700 Cluster will first go into mode Prep Mode and then automatically go into mode mode. You can monitor this on the Tasks page or Tasks pod. Are you sure you want to put the TS7700 Cluster into mode mode? - HYDME0300I
You have submitted a request to Force the TS7700 cluster Cluster into mode mode. The TS7700 Cluster now will be placed into mode mode. You can monitor this on the Tasks page or Tasks pod. Are you sure you want to Force the TS7700 Cluster to be in mode mode? - HYDME0303I
You have submitted a request to return the TS7700 cluster Cluster to Normal mode. This will cancel preparing for mode and put it back into Normal mode. Are you sure you want to continue to return the TS7700 Cluster to Normal mode? - HYDME0304I
You have submitted a request to return the TS7700 Cluster to Normal mode. This will take the TS7700 cluster Cluster out of mode mode. Are you sure you want to continue? - HYDME0305I
The cluster cluster is now preparing to enter Service mode. Depending on the number of queued operations on the nodes of this cluster, this could take a long time. The cluster will no longer be available to the attached hosts or other clusters that make up the grid. - HYDME0306I
The cluster cluster is now Forcing Service mode, this could take a long time. The cluster will no longer be available to the attached hosts or other clusters that make up the grid. - HYDME0307I
The command to cancel Service mode has been issued on cluster cluster and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME0308I
The command to cancel Service mode has been issued on cluster cluster and can take some time to complete. - HYDME0309I
The cluster cluster has been placed into Normal mode. - HYDME0310I
Service mode command failed on the cluster cluster. - HYDME0311E
An internal error occurred. - HYDME0312E
An internal error occurred. - HYDME0314I
Documentation related to restricted rights. Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule with IBM Corp. All online documentation is subject to product license. You will receive no rights beyond those listed in the product license. - HYDME0316E
The value entered is not a valid description. A description may have up to number characters. The current description has number characters. - HYDME0319E
The field address must be a valid IP address. - HYDME0320I
The cluster description has been modified. The previous description was description. The new description is description. - HYDME0321I
The cluster nickname has been modified. The nickname cluster now has the nickname nickname. - HYDME0322I
The corresponding quantity and start VOLSER results in an invalid range: range. Enter a quantity and start VOLSER for which the end VOLSER is greater than or equal to the start VOLSER. Alphabetic VOLSER characters increase alphabetically. Numeric VOLSER characters increase numerically. - HYDME0323I
An invalid character was entered. Only whole numbers are valid. - HYDME0324I
You cannot insert more than number volumes at a time. - HYDME0325I
The grid nickname has been successfully modified. The nickname grid now has the nickname nickname. - HYDME0326E
Enter a valid nickname. The following characters are invalid: - HYDME0327I
The cross-cluster network settings in cluster have been successfully changed. - HYDME0328I
The grid description has been successfully modified. The previous description was . The new description is . - HYDME0330I
Physical volume volser does not contain any virtual volumes. - HYDME0340I
Total cache occupied by flash copies of virtual volumes - HYDME0341I
Total amount of used primary cache. - HYDME0344I
The amount of all used physical cache. This amount includes internal metadata. - HYDME0348I
You cannot insert more virtual volumes than allotted by the number of installed feature codes. - HYDME0349I
The hNode is now online. You must log out and then log back in again to obtain access to all pages on the TS7700 Management Interface. - HYDME0350I
One or more nodes are offline. If you are accessing cluster 0 in a single cluster configuration and are attempting to run Copy Export Recovery, please select Copy Export Recovery Status under Service and Troubleshooting for status. If you are accessing a cluster in a grid environment then this menu option will be different and Copy Export Recovery options will not be shown. Contact IBM Support to bring the nodes back online. - HYDME0361W
You cannot remove the account that you are currently using. - HYDME0362I
The node is going offline. Click the Refresh button as needed to monitor this operation's progress. - HYDME0363I
The node is going online. Click the Refresh button as needed to monitor the progress on this operation. Once the node is online, click the button below to log out and then log in again to obtain access to the TS7700 Management Interface. - HYDME0426I
Manually placing a cluster in read-only or read/write ownership takeover mode is not recommended. By doing so, the remaining clusters will be permitted to forcibly take ownership of the unavailable cluster's volumes, with limited verification. When the unavailable cluster is restored, any enabled ownership modes will automatically be disabled and any volumes which were taken over will be reconciled. Clusters in Service mode are automatically considered to be in read/write ownership takeover mode. - HYDME0427I
You are not authorized to access this cluster. Your administrator must give you permission for this cluster. - HYDME0429I
To avoid any conflicts or potential data loss, make sure that the cluster cluster has failed or that it is not available to any hosts and its physical components are offline. - HYDME0430I
Are you sure that you want to place the cluster cluster into a read/write ownership takeover mode and have you confirmed that the cluster is unavailable? - HYDME0434I
Ownership takeover mode normally changes automatically once the failed cluster is back online, healthy, and all pending virtual volume updates have been reconciled. If the cluster cluster is still failed or inaccessible on the network, manually changing ownership takeover mode will prevent the other clusters in the grid from making changes to the virtual volumes currently being handled by the cluster cluster. - HYDME0435I
Are you sure that you want to manually change the ownership takeover mode on the cluster cluster? - HYDME0436I
Autonomic configurations have been added. - HYDME0437E
Autonomic settings were partially updated. The following clusters were not updated: description. - HYDME0438E
An error occurred when updating the autonomic settings. - HYDME0440I
Are you sure that you want to place cluster cluster into a read-only ownership takeover mode and have you confirmed that the cluster is unavailable? - HYDME0451I
You are no longer authorized to access this page. Log out and log in again to update the navigation. - HYDME0452E
Select at least one cluster. - HYDME0453E
You cannot select a User Name that is root, service, or support. - HYDME0454I
You are not authorized to modify this information. - HYDME0458I
Bringing this node offline will cause the entire cluster cluster to become unavailable to any hosts or other clusters in the grid. - HYDME0459I
Shutting down this node will cause the entire cluster cluster to become unavailable to any hosts or other clusters in the grid. You will not be able to access the web TS7700 Management Interface for this cluster until this cluster is restarted. - HYDME0460I
You will be redirected to the login page when this action completes. - HYDME0461E
The operation operation failed: the selected volume is unavailable. Confirm the virtual volume is available. Contact your IBM service representative if you need assistance resolving this issue. - HYDME0462E
The operation operation failed. This might be caused by a problem with the Library Manager. Contact your IBM service representative if you need assistance resolving this issue. - HYDME0463E
The operation operation failed. A Library Manager program exception has occurred. Contact your IBM service representative if you need assistance resolving this issue. - HYDME0464E
The operation operation failed. The selected volume is not in the library. Confirm that the virtual volume is inserted. - HYDME0465E
The operation operation failed. The selected volume is already in use. Wait for operations on this volume to complete or select another volume. - HYDME0466E
The operation operation failed. The selected volume is unavailable. Wait for this volume to become available or select another volume. - HYDME0467E
The operation operation failed. An order sequence error occurred. Confirm that the virtual volume and the device are available. - HYDME0468E
The operation operation failed. - HYDME0473W
Changes to network settings will affect access to the TS7700 Management Interface on the cluster server. If you continue, all users currently logged in to the TS7700 Management Interface on cluster will be disconnected and required to log back in using the new IP address. Changes to network settings may take several minutes to complete. Note: If an incorrect IP address is specified, users will not be able to log back in except directly from the server, using a serial connection. - HYDME0474W
Are you sure that you want to change these network settings? - HYDME0475W
If you enable encrypt grid communication, the performance of the grid network links could be decreased by 70% or more. - HYDME0479E
The action failed. Cluster cluster cannot be placed into ownership takeover mode. - HYDME0482I
There are no activated feature licenses. A new feature license may be activated by selecting Activate New Feature License from the Actions pull-down menu. - HYDME0483I
There are no operations in progress for the cluster. Check again once an operation has been started. - HYDME0484I
There are no completed/failed operations for the cluster. Check again later to verify whether a current operation has completed or failed. - HYDME0486I
There are no virtual VOLSERs mounted for the cluster. From the table menu, select Mount New Virtual Volume and select the Go button to launch the Stand-alone Mount Virtual Volume page. - HYDME0488I
Unable to retrieve immediate/deferred updates due to a connection problem for a cluster. - HYDME0489I
You are about to enable write-protect mode on the cluster cluster. The cluster can be placed in write-protect mode if it can communicate with all other clusters in the grid. While in this mode, any attempt by a host attached to the cluster to modify a volume or its attributes will fail. Access to a volume while in this mode does not change the cluster ownership of the volume. Are you sure that you want to enable write-protect mode on the cluster cluster? - HYDME0490I
You are about to disable write-protect mode on the cluster cluster. The host attached to this cluster should now be able to modify a volume or its attributes. Are you sure that you want to disable write-protect mode on the cluster cluster? - HYDME0491I
Write-protect mode has been enabled on the cluster cluster. Virtual volumes owned by this cluster (except volumes placed in a category excluded from Write Protect) are now read-only and cannot be updated by hosts. - HYDME0492I
Write-protect mode has been disabled on the cluster cluster. All virtual volumes that are owned by this cluster can now be updated by the hosts. - HYDME0493I
The virtual volume entered does not exist. Enter a valid virtual volume to view the details displayed in the table below. - HYDME0494I
The physical volume entered does not exist. Enter a valid physical volume to view the details displayed in the table below. - HYDME0495I
No physical locations have been returned for this virtual volume. - HYDME0497E
The VOLSER entered is invalid. - HYDME0498E
The Custom Role name is invalid. The name must be number to number characters in length and the last character cannot be a space. - HYDME0500E
The Custom Role name contains the following invalid characters: characters - HYDME0502I
The cluster is currently in a blocked state waiting to share pending update information with one or more unavailable peers. If you know one or more remote clusters are inaccessible, you can click Skip Step. By skipping this step, pending updates against the local cluster may be undetected. Once the unavailable cluster or clusters become available, the pending update sharing will occur. It is recommended that a Skip only be used in cases where the unavailable cluster has remained offline to host software during the entire time this cluster has been unavailable. - HYDME0503E
The description entered is invalid. - HYDME0504E
The cluster you selected is unavailable. - HYDME0505E
You are not authorized to perform this action. Your administrator must change your permissions. - HYDME0506E
The following error occurred while adding a user: user. - HYDME0507E
The following error occurred while modifying a user: user. - HYDME0508E
The user name provided was not found. - HYDME0509E
The group name provided was not found. - HYDME0510W
The PhysicalLibrary Web Management Interface could not be started. - HYDME0511I
The cluster's network settings are being changed. Refer to Tasks page or Tasks pod to monitor the operation's progress. - HYDME0512E
The fully-qualified domain name entered is invalid. - HYDME0513E
The address entered is invalid. - HYDME0514I
The IPSec connection connection was successfully added. - HYDME0515E
An internal error occurred while adding the IPSec connection connection. - HYDME0516I
The IPSec connection connection was successfully updated. - HYDME0517E
An internal error occurred while updating the IPSec connection connection. - HYDME0518I
Are you sure you want to delete IPSec connection connection? - HYDME0519I
The IPSec connection connection was successfully deleted. - HYDME0520E
The IPSec connection connection could not be removed. - HYDME0521E
The address entered is invalid. - HYDME0522I
The IPSec connection was activated successfully. - HYDME0523I
The IPSec connection was deactivated successfully. - HYDME0524E
The local and remote addresses entered are invalid. They must have the same protocol. - HYDME0525E
You cannot enter more than two DNS servers. - HYDME0526E
The Preshared Key is invalid. It must comply with the selected format. - HYDME0527E
The remote network subnet entered is invalid. - HYDME0528E
An IPSec connection with the name 'name' already exists. - HYDME0529I
Grid communication encryption has been enabled. - HYDME0530E
Grid communication encryption could not be configured. - HYDME0531E
The IP address entered is invalid. - HYDME0532I
Grid communication encryption has been disabled. - HYDME0541E
The selected cluster is currently offline. - HYDME0542I
The local copy policy override settings have been successfully modified on cluster cluster. - HYDME0545I
The health state of nickname is Service. - HYDME0546I
The health state of nickname is Service Prep. - HYDME0547I
The health state of nickname is Normal. - HYDME0548I
The health state of nickname is Degraded. - HYDME0549I
The health state of nickname is Failed. - HYDME0550I
The health state of nickname is Offline. - HYDME0551I
The health state of nickname is Unknown. - HYDME0552I
nickname has an event. - HYDME0553I
An invalid account expiration value was entered. Enter a value between number and number days. - HYDME0554I
An invalid account lock value was entered. Enter a value between number and number attempts. - HYDME0560I
No clusters are in the failed state. No actions are available in the remote cluster summary table. - HYDME0561E
The IBM TS3000 System Console has not been configured for all of the clusters in the grid. - HYDME0562E
Enter a valid nickname. A nickname must be number to number characters in length. - HYDME0564E
The Custom Role name is already defined. - HYDME0568I
The pending updates share operation is being skipped. - HYDME0569W
All data on this page will be lost if you navigate to the Roles and Permissions page. Are you sure you want to continue? - HYDME0570E
The following error occurred while deleting a user: user. - HYDME0571E
The node is in an unknown state. - HYDME0572I
Unable to retrieve virtual mount statistics for the following clusters: cluster. For more information on the state of these clusters, refer to the Grid Summary page. - HYDME0578I
This cluster is in the online pending state because it cannot communicate with one or more peers. Click the Refresh button when communication is restored. Once the node is online, click the button below to log out. - HYDME0579I
The Encryption Key Server was successfully updated. Click Ping Test to verify that the Encryption Key Server address is valid and operational. - HYDME0580E
The address address entered is invalid. - HYDME0581E
An invalid number port was entered. - HYDME0583E
The address is blank, if you are adding an Encryption Server please fill up the address field, if you are removing, the port must also be blank. - HYDME0584E
The port is blank, if you are adding an Encryption Server please fill up the port field, if you are removing, the address must also be blank. - HYDME0585E
The address address entered is invalid. The invalid characters found are: characters - HYDME0586W
No pool is selected. - HYDME0587I
Pool encryption settings were successfully modified. - HYDME0588E
The value for the encryption key label is not valid. - HYDME0589I
Please select to enable/disable encryption. - HYDME0590W
Only two clusters in the grid are online and not in Service mode. The system is susceptible to a single point of failure when only one cluster is online and not in Service mode. Select Prepare for Service Mode to continue placing the cluster in Service mode. - HYDME0591E
The feature license for encryption is not installed. - HYDME0592I
The health state of component timed out. Try again. If the problem persists, contact your IBM service representative. - HYDME0593W
Encryption key label 1 was not entered. - HYDME0594I
To avoid volume ownership conflicts and potential data loss, please verify that the other clusters have failed or that they are not available to any hosts and their physical components are offline. - HYDME0595W
Some drives are not encryption-capable and will become unavailable when encryption is enabled. These drives can only be restored by an IBM Service Representative. Do you wish to proceed? - HYDME0597I
Ownership Takeover has been issued to cluster cluster and can take some time to complete. View the Tasks page or Tasks pod to determine the result. - HYDME0598W
Some drives are in J1A emulation mode. - HYDME0599I
The cluster is currently in a blocked state waiting to share pending update information with one or more unavailable peers. By skipping this step, pending updates against the local cluster may be undetected. Once the unavailable cluster or clusters become available, the pending update sharing will occur then. It is recommended that a Skip only be used in cases where the unavailable cluster has remained offline to host software during the entire time the blocked cluster has been unavailable. - HYDME0600I
Virtual Volume to be promoted is no longer found in the Recall Queue. - HYDME0601I
You are about to promote virtual volume volume to the head of the unscheduled portion of the recall queue. Are you sure you want to continue? - HYDME0602W
A virtual volume must be selected. - HYDME0603I
Virtual Volume volume was successfully placed at the head of the Recall Queue. - HYDME0604I
Copy Export Recovery has been requested. This function requires that the recovery machine contain no data. This machine contains data. In order to continue with the recovery process, the existing data must be removed. Removal of the existing data can be accomplished by selecting Erase all existing volumes before the recovery. - HYDME0605I
You submitted a request for Copy Export Recovery using VOLSER volser. Starting the Copy Export Recovery will take the IBM TS7700 offline and log you out of the TS7700 Management Interface. You should wait at least one minute before logging back in to the TS7700 Management Interface. When you log back in to the TS7700 Management Interface, the navigation will contain access to the Service->Copy Export Recovery Status page. This page allows the recovery process to be monitored. - HYDME0606I
If you are sure you want to continue, click the OK button to start Copy Export Recovery. The machine will be taken offline even if jobs are active. Click the Cancel button to abandon Copy Export Recovery. - HYDME0607I
Erase all existing volumes before the recovery has been selected. Continuing will erase the following: - HYDME0608I
All virtual volumes in the database All physical volumes in the database All virtual volumes in the cache All virtual and physical volume records associated with this IBM TS7700's Library Manager partition All database backups - HYDME0609I
If you are sure you want to continue, click the OK button to log out of the TS7700 Management Interface. The IBM TS7700 will be taken offline and all existing data will be erased. You should wait at least one minute before logging back into the TS7700 Management Interface. After you log in, the navigation will contain access to the Service->Copy Export Recovery Status page, which will allow you to monitor the erasure process. At the conclusion of the erasure process, the IBM TS7700 will be placed online and the recovery process can be started. Click on the Cancel button to abandon the erasure process. - HYDME0610I
If you are sure you want to continue, re-enter your password in the box below. - HYDME0611W
The remote cluster you selected is operating with a different version of code than the cluster you logged in from. You will be redirected and must log in to the remote cluster to continue. Do you want to continue? - HYDME0612E
The address entered is not a valid IPv6 address. The value in field entry must be a valid IPv6 address. - HYDME0613W
The Encryption Key Server is not configured or connected. - HYDME0614W
The password entered is incorrect. The password confirmation failed. - HYDME0615I
To run Copy Export Recovery, all existing data on the IBM TS7700 must be erased. To erase existing data and continue, check Erase all existing volumes before the recovery. - HYDME0616W
The password entered is incorrect. The password confirmation failed. - HYDME0617I
A status record exists for Copy Export Recovery operation run on cluster. To view the status of the recovery, select the button below. - HYDME0618I
The Copy Export Recovery is already in progress. - HYDME0619I
The target cluster is configured as a grid. Copy Export Recovery is not permitted to a grid configuration. - HYDME0620I
A recovery was rejected, but one or more physical volumes have been found in the Library Manager database on the target cluster. These physical volumes do not exist in the IBM TS7700 database. Communication between the Library Manager and the IBM TS7700 may not be working. - HYDME0621I
A recovery was rejected, but one or more volumes have been found in the cache on the target cluster. A cleanup of existing data must be done prior to the recovery. - HYDME0622I
There is currently no task for this operation. - HYDME0623I
The ping test against the address address on port number was successful. - HYDME0624W
The ping test against the address address on port number from address failed. The error returned was: error. - HYDME0625I
There is no start time for the task entry. - HYDME0626I
There is no end time for the task entry. - HYDME0627I
There is no total number of steps for the task entry. - HYDME0628I
There is no current step for the task entry. - HYDME0629I
There is no command text ID. - HYDME0630I
There is no progress text ID. - HYDME0631I
There is no error text ID. - HYDME0632I
There are no command text values. - HYDME0633I
There are no progress text values. - HYDME0634I
There are no error text values. - HYDME0635I
In order to perform a ping test you must first submit your address and/or port changes. - HYDME0636I
Before you begin the recovery process, insert the Copy Export volumes into the associated tape library. - HYDME0637E
None of the library's drives are encryption-enabled. - HYDME0638I
No recovery or cleanup is being performed. - HYDME0639E
The operation did not complete. - HYDME0640E
The primary and secondary Encryption Key Server addresses and ports are the same. - HYDME0641I
The physical volumes must be added into the TS7700 Physical volumes ranges. - HYDME0642I
A recovery was requested, but one or more physical volumes found in the Library Manager database were not in the IBM TS7700 database. The communication between the Library Manager and the IBM TS7700 may not be working. - HYDME0643I
No VOLSERs were found in either the Library Manager database or the IBM TS7700 database. - HYDME0644I
The cluster is in Service or Service Prep mode. If volumes were mounted prior to initiating Service or Service Prep mode, demount them using the demount action in the table; otherwise, select a different cluster or take the selected cluster out of Service or Service Prep mode to perform further actions. - HYDME0645W
Your HTTP session will expire soon. Click OK to continue this session and remain logged in. - HYDME0646I
Copy Export Recovery is in progress. The node is preparing to go offline. Click Refresh as needed to monitor the progress of this operation. Once the node is offline, log out then log in again to obtain access to the TS7700 Management Interface. - HYDME0647I
The operator has access to monitoring information, but is restricted from changing settings for performance, network configuration, feature licenses, user accounts or custom roles. The operator is also restricted from inserting and deleting virtual volumes. - HYDME0648I
The lead operator has almost all of the same permissions as does the administrator, but may not change network configuration, feature licenses, user accounts or custom roles. - HYDME0649I
The manager has access to monitoring information and performance data and functions, and may perform actions for users including adding, modifying, or deleting user accounts. The manager is restricted from changing most other settings, including those for virtual volume management, network configuration, or feature licenses. - HYDME0650I
The administrator has the highest level of authority, including the authority to add or remove user accounts. The administrator has access to all service functions and IBM TS7700 resources. - HYDME0651I
The administrator can name and define this custom role by selecting the individual tasks permitted to this custom role. - HYDME0652E
The operation failed. - HYDME0652I
The Read Only Role will leave access only to monitor most of the instances. - HYDME0653W
The cluster you selected is running a different version of the code than the cluster you logged in from. You will be redirected and must log in to the remote cluster. Do you want to continue? - HYDME0654I
A Copy Export Recovery operation is in progress. To check the status of the recovery click the button below. - HYDME0655I
The Copy Export Recovery task is running. Refer to the Service->Copy Export Recovery Status page for updates. - HYDME0656I
Copy Export Recovery must be initiated from a cluster having an ID of 0. Contact your IBM service representative to change this cluster's ID. - HYDME0657W
The maximum number of events has been reached. Existing events must be cleared before new events can be added. - HYDME0658I
You must select at least one active event to be cleared. - HYDME0659W
You have marked system event(s) inactive. System events will be marked inactive automatically when the problem is fixed. Are you sure you want to mark the event inactive? - HYDME0660I
The event(s) were cleared successfully. - HYDME0661W
The command to clear an event failed. The event(s) were unable to be cleared. - HYDME0662I
Select a management class to view copy policy details. - HYDME0663I
Management class was added. - HYDME0665E
Additional management classes cannot be created. - HYDME0666E
A management class with that name already exists. - HYDME0667I
Management class was successfully modified. - HYDME0668I
Do you want to delete the following management class(es)? - HYDME0669I
The management class(es) were deleted. - HYDME0670E
An error occurred while retrieving information for the Management Classes page. - HYDME0680I
You have requested to move the virtual volumes stored on physical volume range range. Are you sure you want to continue? - HYDME0681I
The command to move virtual volumes on physical volume range range has successfully been issued. Click the View Tasks button to check the status of the move operation or monitor the progress on the Tasks pod. - HYDME0682I
The command to move virtual volumes on physical volume range range could not be issued. - HYDME0685I
You have requested to operation, to target pool number. Are you sure you want to continue? - HYDME0686I
You are not authorized to move virtual volumes. - HYDME0688I
You have requested to operation. Do you want to continue? - HYDME0690W
Select at least one row. - HYDME0691E
The command to retrieve category information failed. - HYDME0692E
An internal error occurred. - HYDME0694W
No categories were found. - HYDME0695E
The scratch category number entered already exists or is not allowed. - HYDME0696E
The entry in field is not valid. - HYDME0697E
The entry in field is not valid. - HYDME0698E
The Expire Hold box cannot be checked if Expire Time is zero (0). - HYDME0699E
The field field must contain a value. - HYDME0700I
You are not authorized to cancel physical volume eject operations. - HYDME0701I
You are not authorized to cancel volume move operations. - HYDME0702I
The command to cancel eject physical volumes has successfully been issued. - HYDME0703I
The command to cancel eject physical volumes could not be issued. - HYDME0704I
The command to cancel move volumes has successfully been issued. - HYDME0705I
The command to cancel move volumes could not be issued. - HYDME0706I
The Physical Volume Range range is required. - HYDME0707I
The domain may not contain hyphen(s) (-) at the beginning or end. - HYDME0708I
The Encryption Key Server settings have been successfully updated. - HYDME0709E
domainName is an invalid international domain name. - HYDME0710E
domainName is an invalid domain name. - HYDME0711I
Are you sure you want to delete category ? - HYDME0712I
Category was successfully deleted. - HYDME0715I
Category was successfully added. - HYDME0716E
Additional categories cannot be created. - HYDME0718E
The value entered is not valid. - HYDME0719E
Category name is already defined as a Scratch category. - HYDME0720I
Category was successfully modified. - HYDME0721I
Are you sure you want to delete storage class ? - HYDME0722I
The storage class was successfully deleted. - HYDME0723W
The operation failed. The storage class could not be removed. - HYDME0724W
No Storage Class was selected. - HYDME0725W
You cannot delete the default Storage Class. - HYDME0726I
The storage class was successfully added. - HYDME0727W
Additional Storage Classes cannot be created. - HYDME0728E
The name is not valid. It contains invalid characters or is in the wrong format. The following invalid characters were found: character list - HYDME0729E
The description is not valid because it contains invalid characters or it is in the wrong format. The following invalid characters were found: characters - HYDME0729W
An internal error occurred while updating the Storage Class . - HYDME0730I
The storage class was successfully updated. - HYDME0731E
The field field is required. - HYDME0732W
An internal error occurred while adding the Storage Class . - HYDME0733W
If this Storage Class is deleted, any volumes using it are reassigned to the default Storage Class. - HYDME0735W
Select a Storage Group. - HYDME0740I
Storage group name was successfully added. - HYDME0741I
The maximum number of storage groups has been reached. - HYDME0745I
Storage group name was successfully modified. - HYDME0746E
A temporary failure occurred while accessing the Storage Groups. - HYDME0748E
A Storage Group with the same name already exists. - HYDME0750I
Are you sure you want to delete Storage Group name? - HYDME0751I
Storage Group name was successfully deleted. - HYDME0752E
A Data Class with the same name already exists. - HYDME0753W
If this Storage Group is deleted, any volumes using it are reassigned to the default Storage Group. - HYDME0755E
The entry in field is not valid; the entry should be between 1 and number characters. - HYDME0757E
The default management class cannot be deleted. - HYDME0758E
Additional Data Classes cannot be created. - HYDME0759W
If this management class is deleted, any volumes using it are reassigned to the default management class. - HYDME0760I
Data Class name was successfully added. - HYDME0761I
Data Class name was successfully modified. - HYDME0762I
Are you sure you want to delete Data Class name? - HYDME0763I
Data Class name was successfully deleted. - HYDME0764W
Select a Data Class. - HYDME0765E
Enter a valid length in field. The field must be number to number characters in length. - HYDME0766W
Select at least one row. - HYDME0770I
The command to delete the selected Physical Volume Range has successfully been issued. - HYDME0771I
The command to eject the selected Unassigned Volumes has successfully been issued. Check the tape library to see that the VOLSER is ejected. - HYDME0772E
An inconsistent data level has been detected. - HYDME0773I
An invalid category was entered. A category is a 4-digit sequence hexadecimal number composed of alphabetic characters [A-F] and numerals in the range [0-9]. - HYDME0774I
An invalid category range was entered. A category has a range from number to number. - HYDME0775I
The Expire Time Entry should either be blank with a No Set or Expired Time Unit or should have a value with any other Time Unit. - HYDME0776E
The maximum number of physical volume ranges has been reached. - HYDME0777E
Select a cluster. - HYDME0778E
The command to retrieve data from the server failed. - HYDME0779I
Unassigned volumes will be removed from the right table when a range is added that includes that volume. - HYDME0780E
The requested operation failed. - HYDME0781W
If this Data Class is deleted, any volumes using it are reassigned to the default Data Class. - HYDME0782I
An invalid category range was entered. Possible values include number and the range between number and number - HYDME0783E
The maximum number of inhibit reclaim schedules is 14. - HYDME0784W
The start time is not valid. - HYDME0785W
The number of hours in the duration field is not valid. - HYDME0786I
The inhibit reclaim schedule was successfully added. - HYDME0787I
The inhibit reclaim schedule was successfully modified. - HYDME0788I
The inhibit reclaim schedule was successfully deleted. - HYDME0789I
The search was created. You can monitor the progress of the search by clicking on the Previous Searches hyperlink. - HYDME0790W
The maximum number of previous search results is 10. - HYDME0791W
Volume(s) were not found using the chosen criteria. - HYDME0792E
That File Name already exists. - HYDME0793I
The search name is currently in progress. Click the Previous Searches link to check the completion state of recent searches. - HYDME0794E
An invalid character was entered in the volume search file name. The following invalid characters were found: characters . - HYDME0795W
The search is still in progress. - HYDME0796E
The operation to retrieve the volume search status failed. - HYDME0797I
The search is currently in progress. You can check the progress of the search on the page page. - HYDME0799E
No search criteria have been entered. - HYDME0802E
A Storage Class with the same name already exists. - HYDME0812I
The selected number of days in: field is incorrect. This value should be a number between number and number. - HYDME0813I
Physical volume pools number were successfully modified. - HYDME0814E
The operation to modify the physical volume pool failed. - HYDME0815I
Fields in the selected pools that do not contain the same values are left blank. Fields left blank will retain their original value. - HYDME0816E
Some required fields are blank. - HYDME0817W
TS1140 (3592 E07) drives can only write JB media in an E06 format. Exported volumes will be written in a non-E06 format. - HYDME0818W
Select a cluster before performing this task. - HYDME0819E
The percentage in: field is incorrect. This value should be a number between number and number. - HYDME0820I
The nickname nickname was updated successfully. - HYDME0821E
The nickname nickname was not updated successfully. - HYDME0822I
The selected grid partition does not contain a cluster pair. Select a partition that contains a cluster pair before performing this task. - HYDME0823I
Cluster fake is currently enabled. - HYDME0827I
You have requested to clear previous search results. Are you sure you want to continue? To clear previous search results click OK. To cancel this request click Cancel. - HYDME0828I
Previous search results were successfully deleted. - HYDME0829I
The search was successfully canceled. - HYDME0832E
The page you are attempting to visit did not perform your request. - HYDME0834E
The page you are attempting to visit was unable to perform the following operation: CIMMethod call. - HYDME0840W
Select at least one export hold physical volume. - HYDME0841I
You have requested to eject the export hold physical volumes listed below: volser Are you sure you want to continue? - HYDME0842I
The command to eject export hold physical volumes has successfully been issued. - HYDME0843I
The command to eject export hold physical volumes could not be issued. - HYDME0844W
The new schedule overlaps an existing schedule. - HYDME0845W
The number of minutes in the duration field is not valid. - HYDME0846W
The number of days in the duration field is not valid. - HYDME0853I
Virtual Tape Drive was not found. - HYDME0854I
The selected virtual drive is not ready to mount. To run this operation, make sure the virtual drive is online and ready to mount. - HYDME0855E
You are not authorized to perform a mount/demount of virtual tape drives. - HYDME0856I
This page was unable to update information for the selected virtual tape drive. Instead, it will display the latest consistent information. Contact your IBM service representative if you need assistance resolving this issue. - HYDME0857E
An unexpected error occurred while accessing virtual tape drives. - HYDME0860I
Are you sure you want to demount virtual volume volser from virtual tape drive drive in the cluster cluster? - HYDME0864I
Select at least one virtual tape drive. - HYDME0865I
The selected virtual tape drive must be available to mount a virtual volume. - HYDME0866E
A virtual volume is already mounted on the selected virtual tape drive. - HYDME0867E
No virtual volume is mounted on the selected virtual tape drive. - HYDME0868E
You cannot unmount the volume. The selected virtual tape drive does not have a stand-alone mount. - HYDME0869E
You cannot set all of the copy modes to no copy. A virtual volume must be copied to at least one cluster. - HYDME0870E
The operation failed. The notify host of future events value could not be retrieved. - HYDME0871E
The operation failed. The notify host of future events value could not be set. - HYDME0873E
An internal error occurred. - HYDME0874W
One or more clusters in the grid are operating with a code level that does not support the grid summary feature. The health of any such clusters is displayed as Unknown. - HYDME0877I
The cluster is going offline. Please wait... - HYDME0878I
The cluster is shutting down. Please wait... - HYDME0879I
The cluster is powering off. Please wait... - HYDME0880I
The cluster is now shutdown. It is now safe to power off the frame. - HYDME0881E
A page could not be resolved from your request. - HYDME0882E
An error occurred while determining the state of the machine that is being accessed. - HYDME0883E
The shutdown operation could not be started. - HYDME0884W
It is recommended that you first put the cluster into Service mode before shutting down. - HYDME0885E
Unable to take the cluster offline. The cluster is still online. - HYDME0886E
The cluster is unable to go offline. It is online in an unknown state. - HYDME0887E
The operation to shut down the disk cache failed. - HYDME0888E
An internal error occurred. - HYDME0889W
You can only shut down the cluster that you are logged into. You are currently logged into cluster. - HYDME0890E
A search is already in progress. - HYDME0891E
The search cannot be canceled; it has already finished. - HYDME0892E
The specified search filename already exists. - HYDME0893W
The search found number volumes. Narrow the search criteria to get better results. - HYDME0894E
The search cannot be canceled. - HYDME0895E
The search cannot be canceled. - HYDME0896E
The search you are attempting to see or create cannot be opened or created. - HYDME0897W
A new search cannot be created. - HYDME0900E
Unable to run operation. An internal error occurred. - HYDME0901E
Unable to run operation. - HYDME0902E
Unable to run operation. An internal error occurred. - HYDME0903E
Unable to run operation. The command to delete the default construct failed. - HYDME0904E
Unable to run operation. The command to add the default construct failed. - HYDME0905E
Unable to run operation. The operation could not establish a global lock for one of the resources. Another operation may be in progress on that resource. - HYDME0906E
Unable to run operation. The operation was not able to release the global lock. - HYDME0907E
Unable to run operation. The requested volume is not in the specified volume range. - HYDME0908E
Unable to run operation. The cluster is not online. Verify that the cluster is online and retry the operation. - HYDME0909E
Unable to run operation. The maximum number of 256 records has been reached. - HYDME0910E
Unable to run operation. An error occurred with the notify operation. - HYDME0911E
Unable to run operation. An error occurred while allocating memory. Wait for current operations to finish and try again. - HYDME0913E
Unable to run operation. No records exist for the specified resources. Check your settings and try again. - HYDME0914E
Unable to run operation. This pool cannot be designated as a copy export pool because it is already assigned as a primary pool by a storage group construct. - HYDME0915E
Unable to run operation. The new range cannot overlap an existing range. - HYDME0916E
Unable to run operation. Physical volumes of a different media type exist in this range. - HYDME0917E
Unable to run operation. The operation could not establish a shared memory lock. Another operation in progress may already possess the lock. Wait for the operation in progress to finish and try again. - HYDME0918E
Unable to run operation. The specified virtual volume could not be found in the shared memory. - HYDME0919E
Unable to run operation. The category is not a scratch category. - HYDME0920E
Unable to run operation. The IBM TS7700 is still initializing. Wait for the cluster to come online and retry the operation. - HYDME0921E
Unable to run operation. Incorrect parameters were sent while the IBM TS7700 was initializing. Wait for the cluster to come online completely and then retry the operation. - HYDME0922E
Unable to run operation. The role token was not sent for this command. - HYDME0923W
The operation has been saved but not all components were updated. - HYDME0924E
Unable to run operation. A token used for this command is busy. - HYDME0925I
There are currently no unassigned VOLSERs. - HYDME0926I
The list of existing unassigned VOLSERs cannot be retrieved due to an unexpected internal error. - HYDME0927I
The requested VOLSER was in the physical volume database and the request was rejected. - HYDME0928I
An unexpected error occurred. The requested VOLSER was not ejected. - HYDME0929I
An unexpected error occurred. The count specified is less than 0. - HYDME0930I
An unexpected error occurred. No count number was specified. - HYDME0931I
An unexpected error occurred. The count specified is not numerical. - HYDME0932I
An unexpected error occurred. The VOLSER specified has an invalid length. - HYDME0933I
An unexpected error occurred. No VOLSER was specified. - HYDME0934I
An unexpected error occurred. An invalid option was specified. - HYDME0936E
An internal error occurred while decoding the feature license key. - HYDME0937E
The update to the feature licenses could not be performed. - HYDME0938I
You have requested to remove feature license feature. Are you sure you want to continue? To continue with the removal, click OK. To cancel this request, click Cancel. - HYDME0939E
Invalid characters were entered. The following characters are invalid: characters. - HYDME0941E
Some events were not cleared: events - HYDME0942E
No events were cleared. - HYDME0943E
Select only one row from the table to run operation. - HYDME0944I
The health status of the physical tape drives can only be retrieved every 20 minutes. The health status of the physical tape drives cannot be retrieved when the library is paused. - HYDME0945W
The following current request(s) are in progress: requests. - HYDME0948E
Unable to run operation. - HYDME0949I
The configuration was not updated, the settings are identical or no changes were found. - HYDME0950I
The backup file is ready to be saved or opened, if you leave this page the file may not be available to be saved or opened. To return to the Settings->Cluster Settings->Backup Settings page, select back. - HYDME0958I
Restore is currently in progress, leaving the page will cancel the process. - HYDME0959E
The operation to restore the specified settings completed with some errors. The settings successfully issued are: settings. The following errors occurred while issuing the command for settings: errors - HYDME0960E
The file upload operation failed. - HYDME0961I
The command to recover the specified settings has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. NOTE: The operation may be logged on the accessing cluster instead of the selected cluster depending on the restored setting scope. Check the Tasks page for both the accessing and the selected clusters. - HYDME0962E
The data recovery operation failed. - HYDME0963E
The file is in an invalid format or is corrupted. - HYDME0964E
An internal error occurred while reading the file. Try again. If the problem persists, contact your IBM service representative. - HYDME0965E
Data cannot be retrieved for the specified settings. - HYDME0966E
An error occurred while creating the backup file. - HYDME0968W
The Inhibit Reclaim Schedules cannot be modified using the restore process. - HYDME0969I
Are you sure you want to continue? - HYDME0970I
You have requested to run an inventory upload to synchronize the IBM TS7700. Do you want to continue? - HYDME0971I
The inventory upload was queued successfully. - HYDME0972I
The inventory upload status could not be retrieved. - HYDME0973I
The custom role name was changed from name to name. - HYDME0975I
To clear the selected event(s) related to unload/load operations, the following drive(s) will be made available: drives. Do you wish to clear the event(s) related to unload/load operations? - HYDME0976I
You can only clear up to 10 events at a time. - HYDME0977I
No explanation is defined. - HYDME0978I
No action is defined. - HYDME0980I
Select at least one setting to backup. - HYDME0981I
Select at least one setting to restore. - HYDME0982I
The file does not contain settings to restore. - HYDME0983E
A backup file is required. - HYDME0990E
A temporary failure occurred. - HYDME0991I
The operational status of cluster is Normal. - HYDME0995E
The cluster is not attached to a physical tape library. - HYDME0996W
The IBM TS7700 Disk-Only system is in the Limited Free Cache Space Warning state. The available free cache space on the IBM TS7700 Disk-Only system is less than 3 TB. - HYDME0997W
The IBM TS7700 Disk-Only system is in the out-of-cache, resources critical state. The amount of allocated free space on the IBM TS7700 Disk-Only system is less than 1 TB. - HYDME0998I
Category name was successfully added. - HYDME0999I
Category name was deleted. - HYDME1000W
No category is selected. - HYDME1001I
Are you sure you want to delete the category from the Category Write Protect Properties table? - HYDME1002I
The maximum limit of categories to exclude has been met. - HYDME1003I
Category name was successfully modified. - HYDME1004I
The selected category number already exists. - HYDME1005I
The cluster families were updated successfully. - HYDME1006I
Cluster families web fake is currently enabled. - HYDME1007E
The operation failed. The cluster families could not be retrieved. - HYDME1008E
Confirm the request to delete the cluster family. Any clusters assigned to the family will return to the unassigned category - HYDME1009E
The name of the family cannot be empty. - HYDME1010E
One or more families do not contain a cluster. - HYDME1011E
A cluster family with the same name already exists. - HYDME1012E
Additional families cannot be added. - HYDME1013E
Cluster families are not supported by the installed microcode. - HYDME1014E
The family configuration created is not valid. - HYDME1015E
A problem occurred while gathering cluster family information. - HYDME1016E
A problem occurred while trying to save cluster family information. - HYDME1017E
The family name is not valid. It contains invalid characters or is in the wrong format. - HYDME1018E
A problem has been detected in Cluster Families information. Inconsistent data has been retrieved. - HYDME1019I
You can drag and drop clusters between existing or new cluster families and unassigned clusters. Select the clusters you want to move, drag them to the desired family or unassigned cluster area, and release. For more information about this feature consult the help. - HYDME1020E
Cluster Family information updated successfully but the settings may take some time to reflect updates. - HYDME1021E
Cluster Family information was partially updated. - HYDME1022E
Cluster Family information was partially updated. - HYDME1023E
Cluster Family information was not updated due to a communication problem. - HYDME1024E
The server was not updated. - HYDME1025E
The server was not updated. - HYDME1026E
The operation failed. The system is unable to retrieve information from the server. - HYDME1027E
An inconsistent number of families was received from the server. - HYDME1028E
A problem occurred while trying to synchronize cluster families configuration. - HYDME1035E
The format of the date is not valid. - HYDME1036E
The format of the time is not valid. - HYDME1037W
The Removed Time entry cannot be blank. - HYDME1038I
The health of the Physical Tape Drive with serial number serial is normal. - HYDME1039W
Unable to retrieve data. - HYDME1040E
An InfoCenter file is required. - HYDME1041E
The version of the uploaded file is number but must be number or greater. - HYDME1042W
Unable to retrieve the current version of the InfoCenter. - HYDME1043E
The version number is an invalid version of the InfoCenter. - HYDME1044I
The InfoCenter version number has been installed successfully. The TS7700 Management Inteface is restarting ... - HYDME1045E
The InfoCenter update operation failed. - HYDME1046E
An unknown return code was received while retrieving Library Port Access Groups information. - HYDME1047E
An unexpected exception occurred while retrieving Library Port Access Groups information. - HYDME1048E
The method failed to update the server information. - HYDME1049E
An unknown return code was received while updating Library Port Access Groups information. - HYDME1050I
Library Port Access Groups web fake is currently enabled. - HYDME1051E
Select only one Access Group. - HYDME1052I
Select at least one Access Group to perform this task. - HYDME1053I
Select at least one Access Group Range to perform this task. - HYDME1054I
Select the action you want to perform. - HYDME1055E
You cannot select more than 31 Library Port IDs per cluster. - HYDME1056E
Select at least one Library Port ID. - HYDME1057I
Access Group name was successfully added. - HYDME1058E
An error occurred while adding a new Access Group. - HYDME1059I
The Access Group Range was successfully deleted. - HYDME1060I
The Access Group was successfully deleted. - HYDME1061I
The Access Group was successfully modified. - HYDME1062W
The default Access Group cannot be deleted. - HYDME1063E
The Library Port Access Group name entered is not valid. - HYDME1064E
An access group with the same name already exists. - HYDME1065W
No modifications were made to the Access Group; at least one port ID must remain selected. - HYDME1066E
A problem occurred while attempting to obtain the accessing cluster from the server. - HYDME1067E
The operation failed. The Library Port Access Groups could not be retrieved. - HYDME1068I
The Access Group Range was successfully modified. - HYDME1069I
The Access Group Range was successfully added. - HYDME1070W
The current version of the InfoCenter could not be retrieved. - HYDME1071E
The WAR file you are trying to use contains unsigned entries which have not been integrity-checked. - HYDME1072I
The InfoCenter file can only be uploaded to the accessing cluster. - HYDME1073W
Changes to Infonceter plugin will restart the TS7700 Management Interface. If you continue, all users currently logged on will lose connection to the Management interface and will be required to log in again. Changes to Infoncenter plugin may take several minutes to complete. \n\n Are you sure you want to continue with the Infocenter changes? - HYDME1074I
The cancel copy export recovery process was successfully started. - HYDME1075I
You submitted a request to cancel the copy export recovery. If you are sure you want to continue, click the OK button. This will return the machine to a clean state. If do not want to continue click the Cancel button. You will be redirected to the Service->Copy Export Recovery Status page. - HYDME1076W
The system is transitioning online or offline and could not complete your request. - HYDME1077W
The node is transitioning online or offline. Copy export recovery cannot be cancelled at this time. - HYDME1080W
At least one cluster does not support Library Port Access Groups. Some settings were not restored. - HYDME1081E
The values are not the same. Enter the same value in both fields. - HYDME1082I
The number of failed logins for the account was successfully reset to zero. - HYDME1083I
The password expiration for the account was successfully reset. - HYDME1090W
Cluster IDs in the backup file do not match the cluster IDs in the system. Copy policies will be changed. - HYDME1091W
The restored management classes, storage classes, and storage groups will be modified because the cluster is not attached to a physical tape library. - HYDME1092W
There are differences between the number of clusters in the backup file and the system. - HYDME1093E
The restore operation failed. - HYDME1094W
The physical tape library settings will all be restored to default values. - HYDME1095W
A cluster targeted for restoration does not support Logical WORM. - HYDME1096I
user has been successfully authenticated. user has the following roles: roles. user has access to the following clusters: clusters. - HYDME1097W
The user could not be authenticated. - HYDME1099W
The cluster has run out of empty stacked volumes. Mount operations are accepted and queued, but are not run while in this state. - HYDME1100W
The cluster's copy operations are disabled by the system. - HYDME1101W
The cluster's copy operations are disabled by the host. - HYDME1102W
The cluster is operating in immediate copy mode and at least one copy has not finished prior to the completion of the rewind unload command. - HYDME1103E
The operation failed. Unable to retrieve warning messages. - HYDME1104E
The user user no longer exists. - HYDME1105E
Unable to retrieve the write protect mode state. - HYDME1106E
The following error occurred while creating the authentication service policy: policy. - HYDME1107E
The following error occurred while modifying the authentication policy: policy. - HYDME1108E
The following error occurred while deleting the authentication policy: policy. - HYDME1109I
The Storage Authentication Service Policy policy was successfully created. - HYDME1110I
The Storage Authentication Service Policy policy was successfully modified. - HYDME1111I
The Storage Authentication Service Policy policy was successfully deleted. - HYDME1112W
The URL address does not provide a certificate. - HYDME1113W
Unable to validate the URL address. - HYDME1114E
The value: address is not a valid URL. - HYDME1115E
Unable to connect to a host at address. - HYDME1116E
An internal error occurred while communicating with the URL address. - HYDME1117E
A trust store location has not been defined. - HYDME1118E
An internal error occurred while trying to update the trust store. - HYDME1119I
The authentication policy policy was successfully assigned to the following clusters: number. - HYDME1120E
The Local authentication policy cannot be deleted. - HYDME1121I
The user user was given the role of role. - HYDME1122I
The users in group group were given the role of role. - HYDME1123I
The user users was successfully removed. - HYDME1124I
The group group was successfully removed. - HYDME1125E
The selected policy no longer exists. - HYDME1126I
The certificate was successfully added. - HYDME1127I
The certificate was successfully deleted. - HYDME1128E
The authentication policy you are trying to assign would not give you sufficient permission to login into the following clusters: cluster - HYDME1129E
The authentication policy you are trying to assign would not give you an Administrator role. - HYDME1130E
An internal error occurred while retrieving the health state. - HYDME1131W
All available storage cells in the attached physical library have been used. - HYDME1132W
The cluster is operating with limited free space in cache. - HYDME1133W
The cluster has run out of cache resources. Scratch mounts will fail. Writing to virtual volumes will fail. - HYDME1134I
The TS7700 Management Interface for this cluster will become unavailable soon after the operation starts. - HYDME1135I
The Direct LDAP Security Policy object was successfully created. - HYDME1136I
The Direct LDAP Security Policy object was successfully modified. - HYDME1137I
The Direct LDAP Security Policy object was successfully deleted. - HYDME1138I
The maximum number of volumes to export was successfully changed to number. - HYDME1139W
The value in the number of volumes field is not valid. - HYDME1140I
Copy Export is currently in progress. - HYDME1144E
Passwords entered do not match. - HYDME1147E
The Current Password field cannot be blank. - HYDME1148E
The New Password field cannot be blank. - HYDME1149E
The Re-enter New Password field cannot be blank. - HYDME1150E
The operation to encrypt the password failed. - HYDME1151E
The user was not found. - HYDME1152E
The Current Password entered is incorrect. - HYDME1153E
The password cannot be updated. - HYDME1154E
The password was not updated. - HYDME1155E
An error occurred authenticating the user to all authentication servers on all the selected clusters. - HYDME1156E
Cluster cluster could not contact the authentication service with URL address. - HYDME1157E
Cluster cluster did not have a valid signer certificate for validating service. - HYDME1158E
Cluster cluster could not communicate with authentication service at address. - HYDME1159E
Cluster cluster failed basic authentication with the Storage Authentication Service at address. - HYDME1160E
The username or password is invalid to authenticate cluster cluster on the authentication service at address. - HYDME1161E
An internal error occurred while authenticating the user on cluster cluster to the authentication service at address. - HYDME1165I
The password was updated successfully. - HYDME1166W
The User Name->Modify Password page is available from the banner only when the Local authentication policy is enabled for the cluster. - HYDME1167E
Session time out cannot be zero. - HYDME1168E
Cluster cluster failed server authentication with the Direct LDAP Authentication Service at address. - HYDME1170I
The values you see on this page may differ slightly from the Cache Utilization page since the Monitor->Performance->Cache Utilization page updates in 15 minute increments. - HYDME1171W
Initialization is still in progress. Cache information displayed on this page may not reflect the actual status of the cache. - HYDME1172I
The temporary removal threshold will be changed to number GB. The new removal threshold will only take effect when the temporary removal threshold has been enabled from the Grid Summary->Actions menu. Do you want to continue? - HYDME1173I
The temporary removal threshold changes were issued. - HYDME1174I
The Cancel Lower Threshold task was successfully issued. Refer to the Tasks page or Tasks pod to monitor the cancel operation. - HYDME1175I
A backup is currently in progress, leaving this page will cancel the process. - HYDME1176I
The backup file was successfully created. - HYDME1177E
The server URL is not an IPv4 address. Enter an IPv4 address for the server URL. - HYDME1178E
The user was successfully authenticated but does not have permission to access the management interface. - HYDME1179I
Retain Copy Mode is enabled. Any changes to the Copy Mode will only occur when the volume is scratch mounted or written from beginning of tape. - HYDME1180I
Retain Copy Mode is disabled. No changes to the Copy Mode will be applied until the virtual volume is mounted. - HYDME1185I
Category-based operations are not supported for code levels lower than 8.7.0.xx. One or more clusters in the grid are operating with a version of code lower than 8.7.0.xx. To use this function, upgrade the other clusters in the grid to a level of 8.7.0.xx or higher. - HYDME1186I
Values entered are identical to the current values. - HYDME1187I
You have requested a change to ignore fast ready characteristics for write protected categories on the cluster cluster. Are you sure you want to continue? - HYDME1188I
The ignore fast ready characteristics for write protected categories were successfully changed. - HYDME1189I
Too many users are currently logged into the management interface. No more than max number of users users can be logged into the management interface at a time. To access the management interface, one or more current users must first log out. - HYDME1190I
The total number of users logged into the management interface is lower than the maximum. One or more new users can now log in. Please log out and log in again. - HYDME1191W
You cannot log yourself out using the Logged in Users table. - HYDME1192E
You cannot log in. The maximum number of users logged in has been reached. - HYDME1193E
The operation could not be completed. The host enabled Write Protect mode. - HYDME1195W
One or more clusters have run out of empty stacked volumes. Mount operations are accepted and queued, but are not run while in this state. - HYDME1196W
Copy operations of one or more clusters are disabled by the system. - HYDME1197W
Copy operations of one or more clusters are disabled by the host. - HYDME1198W
One or more clusters are operating in immediate copy mode and at least one copy did not finish prior to the completion of the rewind unload command. - HYDME1199W
All available storage cells have been used in the physical tape library attached to one or more clusters. - HYDME1200W
One or more clusters are operating with limited free space in cache. - HYDME1201W
One or more clusters have run out of cache resources. - HYDME1207I
The health state of cluster is offline and it is operating in Service mode. Contact your IBM service representative to bring the node online. - HYDME1208I
The health state of cluster is offline and it is operating in Service Prep mode. Contact your IBM service representative to bring the node online. - HYDME1209I
The health state of cluster is offline and the Service mode status is Unknown. Contact your IBM service representative to bring the node online. - HYDME1210I
The health state of cluster is offline and the Service mode status is failed. Contact your IBM service representative to bring the node online. - HYDME1211I
The cluster is online but in Service mode. Management interface functions will be restricted until the cluster has been brought out of Service mode. - HYDME1212I
There are more events - HYDME1213I
Information events exist on nickname. - HYDME1215E
Dates or times entered are not in a valid format. Verify the format of data entered and try again. - HYDME1216E
Dates or times entered are not valid. Start Date and Time must be previous to End Date and Time. - HYDME1217E
Dates or times entered are not valid. Start Date and Time must be within the previous 90 days. - HYDME1218E
Dates or times entered are not valid. The time frame selected can not be greater than 24 hours. - HYDME1219E
Dates or times entered are not valid. The end date cannot be in the future. - HYDME1220E
Dates or times entered are the same as those used for data displayed in the chart. The entered time frame must be different. - HYDME1221E
The time entered is not valid. Time must be in 15-minute increments. - HYDME1222W
Select at least one empty sunset media physical volume. - HYDME1223I
You have requested to eject the following empty sunset media physical volume(s): volser Are you sure you want to continue? - HYDME1224I
The command to eject empty sunset media physical volumes has successfully been issued. - HYDME1225I
The command to eject empty sunset media physical volumes could not be issued. - HYDME1226I
You cannot eject more than 500 volumes at one time. The first 500 empty sunset media physical volumes in the list will be ejected: volser Are you sure you want to continue? - HYDME1231E
The new Access Group Range overlaps with an existing volume range. - HYDME1232E
Additional Library Port Access Groups cannot be created. - HYDME1233I
There are no activated feature licenses for this page. - HYDME1235W
The browser version you are using is not supported and some pages may not display correctly. Please use one of the following supported browsers: Firefox 24.0/31.0/38.0, Firefox ESR 24.x/31.x/38.x, Internet Explorer 9/10/11, Edge 25.x or Chrome 39.x/42.x. - HYDME1236W
Compatibility View is enabled on the browser, but is not supported for use with the TS7700 Management Interface. - HYDME1237W
JavaScript and cookies must be enabled on the browser for use with the TS7700 Management Interface. - HYDME1240W
The volume range being inserted extends beyond the range of the existing access group. The volumes that do not have a defined access group range will be given the default library port access group. - HYDME1241E
Additional Access Groups Ranges cannot be created. - HYDME1242E
You cannot delete a Library Port Access Group that is being used by an Access Group Range. - HYDME1243E
The number of clusters that have a copy mode of synchronous copy must be two. - HYDME1244E
You have requested to copy the following management classes to the following clusters. Do you want to continue? - HYDME1244W
The traceroute command should not be used during normal operations. - HYDME1245E
The default management class cannot be copied to another cluster. - HYDME1246E
The default storage class cannot be copied to another cluster. - HYDME1247E
The default storage group cannot be copied to another cluster. - HYDME1248E
The management classes were added to the clusters. - HYDME1249I
The storage class was added to the clusters. - HYDME1250E
The storage group was added to the clusters. - HYDME1251E
The constructs could not be retrieved from cluster clusterNum. - HYDME1255I
You have requested to move export hold physical volumes in pool to private. Exported volumes cannot be restored without a database backup. Would you like to move these volumes back to private? - HYDME1256I
You have requested to move export hold physical volumes in pool to private. Only the first 500 physical volumes listed can be moved during this action. Exported volumes cannot be restored without a database backup. Would you like to move these volumes back to private? - HYDME1257I
The command to move the export hold physical volumes in pool number back to private could not be issued. - HYDME1258I
The command to move the export hold physical volumes in pool number has been issued and can take some time to complete. Click the View Tasks button to check the status of the move operation or monitor the progress on the Tasks pod. - HYDME1259I
There are no candidate export hold physical volumes in pool . - HYDME1262E
The address entered is invalid. - HYDME1263W
You cannot store more than 24 system snapshot files or 2 TS7700 log collection files. If you continue, the following file(s) will be deleted: file number To save this information, the file(s) must be offloaded by your IBM service representative before continuing. - HYDME1264E
The time period selected is already covered by a TS7700 log collection. Change the time to number hours and try again. - HYDME1265W
System snapshot and TS7700 log collection data are not automatically sent to IBM. You must open a problem management report (PMR) to manually move the data off the machine. - HYDME1266W
Time to complete TS7700 log collection varies depending on the number of hours selected. This operation can take 30 minutes or longer to complete. - HYDME1267I
Thoroughly describe the problem you experienced. Include symptoms and any information that can assist IBM Support in the analysis process, including: description of the preceding operation, VOLSER ID, device ID, any host error codes, any preceding messages or events, time and time zone of incident, and a problem management report (PMR) number. - HYDME1268I
Starting a data collection operation. View the Tasks page or Tasks pod to monitor the operation's progress. - HYDME1269E
The description must contain fewer than 1000 characters. - HYDME1270E
Select at least one option to perform a data collection operation. - HYDME1271E
An internal error occurred. - HYDME1272W
The web browser used is an unsupported version that may not render pages correctly. The following pages cannot be modified while using this browser:\n Grid Summary\nHistorical Summary\nManagement Classes\nCluster Families\nOwnership Takeover AOTM Settings\nNetwork Diagnostics - HYDME1273W
Write Protect Mode Enabled - HYDME1274I
Unmounting volser object might cause data loss because the volume was not mounted on object as a stand-alone. The volume could be in use by the host. Do you want to unmount this non-stand-alone volume? - HYDME1275I
A host device number has been assigned to object drives. Enable the Host Device Number column to see the change. - HYDME1276I
A host device number has been assigned to the drive. Enable the Host Device Number column to see the change. - HYDME1277I
The host address has been cleared for object drives. Enable the Host Device Number column to see the change. - HYDME1278I
The host address has been cleared for the drive. Enable the Host Device Number column to see the change. - HYDME1282I
Your current host throughput is attempting MiB/s, which is above your licensed threshold of MiB/s. Your system’s maximum purchasable throughput is MiB/s. - HYDME1283I
The cluster is in a premigrate steady state. - HYDME1284I
Your cache free space is low. Inbound host writes have been slowed to reduce the risk of a cache full situation. - HYDME1285I
Immediate copies may approach the MIH timeout value. Immediate copy throttling applied. - HYDME1286I
An excessive amount of content is cache resident, which remains to be copied to one or more remote TS7700 clusters in the grid. - HYDME1287I
The grid is in a premigrate steady state. - HYDME1288I
Your cache free space is low. Incoming copies have been slowed to reduce the risk of a cache full situation. - HYDME1289I
Host I/O exceeded configured threshold; deferred copy throttling applied. - HYDME1290I
Cluster resource use is high. The deferred copy throttle has been applied. - HYDME1291I
The cache partition is low on free space. Inbound host writes to this partition have been slowed to reduce the risk of a cache partition's used space being overcommitted. - HYDME1292I
The cache partition is low on free space. Incoming copies to this partition have been slowed to reduce the risk of a cache partition's used space being overcommitted. - HYDME1293I
1. Purchase additional Feature code license FC5268. 2. Split host workload to other clusters or grids. - HYDME1294I
Premigration is a normal TS7700 Tape Attach operation however its impact can at times be reduced. Things to consider: 1. Increase premigration thresholds (PMPRIOR and PMTHLVL) which can help defer when the TS7700 Tape Attach enters the sustained steady state. 2. Consider increasing the number of premigration drives per pool to improve efficiency of premigration during the steady state period. 3. Consider decreasing other inbound and/or outbound workloads such as grid replication through deferred copy throttling. 4. Consider purchasing more FC5274. (TS7700T only) 5. Consider increasing size of the tape attached partitions. (TS7700T only) 6. Consider decreasing data in cache partition 0 (resident only partition) for over-spilled data from tape attached partitions. (TS7700T only) - HYDME1295I
1. Ensure there are enough backend tape resources to handle migrations (TS7740 only). 2. Consider enabling more cache capacity. 3. Consider lowering the premigration thresholds (PMPRIOR and PMTHLVL) (TS7740 only). 4. Consider letting other clusters have copies so that auto removal works on this cluster (except TS7740). - HYDME1296I
1. Determine if the network between clusters is degraded. 2. Consider using smaller volume sizes for immediate copy workloads. 3. Consider disabling immediate copy throttling if it seems unnecessary (ICOPYT). - HYDME1297I
1. Validate target clusters are operational. 2. Validate network bandwidth between clusters. 3. Determine if excessive copy queues exist within the grid and investigate further. - HYDME1298I
Premigration is a normal TS7700 Tape Attach operation however its impact can at times be reduced. Things to consider on remote clusters: 1. Increase premigration thresholds (PMPRIOR and PMTHLVL) which can help defer when the TS7700 Tape Attach enters the sustained steady state. 2. Consider increasing the number of premigration drives per pool to improve efficiency of premigration during the steady state period. 3. Consider decreasing other inbound and/or outbound workloads such as replication through deferred copy throttling. 4. Consider purchasing more FC5274. (TS7700T only) 5. Consider increasing size of the tape attached partitions. (TS7700T only) 6. Consider decreasing data in cache partition 0 (resident only partition) for over-spilled data from tape attached partitions. (TS7700T only) - HYDME1299I
If copy rate is not adequate, consider the following: 1. Increase the threshold of when deferred copy throttling is enabled (DCTAVGTD). 2. Consider disabling or adjusting how aggressive the deferred copy throttle is when enabled (DCOPYT). - HYDME1300I
1. If copy rate is not adequate, consider disabling or adjusting how aggressive the deferred copy throttle is when enabled (DCOPYT). 2. Check system for other activity such as reclaims, premigration or high rates of recalls. - HYDME1301I
You cannot unmount this drive because the drive status is not idle. - HYDME1302W
The current cluster is pending for a service. The system is susceptible to a single point of failure when only one cluster is online and not in Service mode. Select Force Service Mode to continue placing the cluster in Service mode. - HYDME1303I
You are about to promote virtual volume volume to the head of the incoming copy queue. Are you sure want to continue? - HYDME1304I
Virtual Volume volume was successfully placed at the head of the Incoming Copy Queue. - HYDME1305E
The operation to promote Virtual Volume volume on the Incoming Copy Queue could not be performed. - HYDME1306I
If the host rate is not adequate, consider the following: 1. Increase the cache partition's allocated space. 2. Balance the host workload evenly across the cache partitions. 3. Ensure there are enough backend tape resources to handle migrations. - HYDME1307I
If the host rate is not adequate, consider the following: 1. Increase the cache partition's allocated space. 2. Balance the host workload evenly across the cache partitions. 3. Ensure there are enough backend tape resources to handle migrations. - HYDME1308W
No flash copy properties are available. - HYDME1310I
Are you sure you want to cancel the current operation? - HYDME1311I
A data collection operation is running. - HYDME1315I
At least one virtual volume exists on a physical volume in this VOLSER range. Are you sure you want to delete this range? If you delete this range, any virtual volumes in the range can become unavailable. To delete this VOLSER range click OK. To cancel this request click Cancel. - HYDME1320I
The feature license command could not be completed. The license for this instance of the feature could not be activated due to a system restriction. Note: SMIT (the system management interface tool) is required to install some features. For more information, contact your IBM Service Representative. - HYDME1330E
An error occurred while resizing the selected partition. - HYDME1331I
The command to rename the partition has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME1332E
An error occurred while renaming the selected partition. - HYDME1333I
The command to create the partition has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME1334E
An error occurred while creating the tape partition. - HYDME1335I
By designating as the primary partition, any volume not assigned a partition or was previously assigned but the partition no longer exists will use this partition's property as a default. Do you want to continue? - HYDME1336I
The command to designate the partition as primary has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME1337E
An error occurred while deleting the tape partition. - HYDME1338I
The command to delete the partition has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME1339I
Decreasing size to this size will require numberTB of data to be migrated out of this partition's cache and on to physical tape. The partition will be in an overcommitted state until the condition clears. This action may cause performance degradation and will take some time to complete. Do you want to continue? - HYDME1340I
The command to resize the partition has been issued and can take some time to complete. You may view this operation's progress from the Tasks page or Tasks pod. - HYDME1341E
An error occurred while designating the partition as primary. - HYDME1342E
The operation could not be completed. Unknown class to apply changes to. - HYDME1343W
One or more partitions from the backup file will not be restored. - HYDME1344W
The partition is in overcommit state - HYDME1345E
The operation could not be completed. Invalid statistic type when trying to get partition statistics - HYDME1346E
The operation could not be completed. Invalid data when trying to get the Removal Threshold - HYDME1347I
One or more clusters in the grid are operating with a code level that does not support the Direct LDAP policy. To use this policy upgrade the other clusters in the grid to a level of 8.30.x.xx or higher. - HYDME1348I
The cluster is not TS7700T. - HYDME1349I
The cluster does not have one resident-only or tape-only partition. - HYDME1350E
The External authentication policy cannot be deleted. - HYDME1355I
There is another CSV download in progress of this page. - HYDME1356I
An internal error occurred while trying to generate the page CSV file. - HYDME1360E
Error while retrieving LI REQ Command data. Close the window and try again, if the problem persist please contact your IBM service representative. - HYDME1361W
The browser you are using does not support TLS version 1.2 and the HTTP traffic is disabled. If you continue, you might lose access to the TS7700 Management Interface. Consider to use a newer browser or enable the HTTP traffic. Do you want to continue? - HYDME1362W
Changing the HTTP settings will restart the TS7700 Management Interface. If you continue, all users currently logged in will lose their connections and will be required to log in again. Are you sure you want to continue with the HTTP settings changes? - HYDME1363E
Invalid alias entered. The alias must be unique. - HYDME1370I
TS7700 key regeneration can take several minutes to complete. The regeneration progress can be monitored in the Tasks page or the Tasks pod. Are you sure you want to continue? - HYDME1371I
Starting a key regeneration operation. View the Tasks page or Tasks pod to monitor the operation's progress. - HYDME1372E
An internal error occurred while trying to regenerate the external key. - HYDME1373E
The operation could not be completed. Invalid data when trying to get the external key creation date - HYDME1374E
The operation could not be completed. Invalid data when trying to perform the external key regeneration. - HYDME1375I
The remote cluster you selected is operating with a different version of code than the accessing cluster. Please open the Management Interface locally within that cluster. - HYDME1376E
An internal error occurred while trying to validate the certificate signature. - HYDME1377E
The operation could not be completed, the certificate signature does not conform to security constraints. - HYDME1378E
An internal error occurred while trying to retrieve the information of the given trusted certificate file. - HYDME1379W
Changes to HTTPS Certificate will restart the TS7700 Management Interface. If you continue, all users currently logged on will lose connection to the Management Interface and will be required to log in again. Are you sure you want to continue with the HTTPS Certificate replacement? - HYDME1380E
An internal error occurred while trying to add the new certificate. - HYDME1381E
An internal error occurred while trying to remove the selected certificate. - HYDME1382E
A key store location has not been defined. - HYDME1383E
An internal error occurred while trying to update the key store. - HYDME1384E
An internal error occurred while trying to replace the certificate. - HYDME1385W
The HTTP traffic is disabled. If you continue you might loose access to the Management Interface if an unexpected error occurs when replacing the HTTPS certificate. Consider to enable the HTTP traffic and disable it after the certificate is installed correctly. Changes to the HTTPS Certificate will restart the TS7700 Management Interface. If you continue, all users currently logged on will lose connection to the Management Interface and will be required to log in again. Do you want to continue? - HYDME1386E
The TS7700 and authentication server could not negotiate the desired level of security. The connection could not be established. - HYDME1387E
An internal error occurred while trying to store the certificate files. - HYDME1388E
An internal error occurred while trying to retrieve the certificate. No current certificate on host. - HYDME1389E
Private Key and Public Key Certificate inputs cannot be blank. - HYDME1394E
An internal error occurred while retrieving the TKLM certificate information. - HYDME1395I
TKLM Certificate installation task completed successfully. - HYDME1396E
An internal error occurred while trying to install the TKLM certificate. Go to the Tasks page for more details. - HYDME1397E
The connection could not be established between the TS7700 and the authentication server. - HYDME1400E
The new password length should be between 8 and 16 characters. - HYDME1401E
The new password should contain at least one number and one letter. - HYDME1402E
The new password should not include spaces. - HYDME1403E
The username should not be included in the new password. - HYDME1404E
The new password has been used before. - HYDME1405E
The new password contains invalid characters. - HYDME1410W
You have marked task(s) as inactive from a remote cluster. This action is not allowed. Only tasks from an owner cluster can be marked as inactive. The rest of the elements will be marked as inactive. - HYDME1411W
You have marked task(s) as inactive from a remote cluster. This action is not allowed. Only tasks from an owner cluster can be marked as inactive. - HYDME1415I
Not delayed. No reason - HYDME1416I
No available copy source was found - HYDME1417I
The volume was still mounted. Valid for the cluster with micro code level 8.20 or below (parallel copy is not supported) - HYDME1418I
Recall failed in all possible copy sources - HYDME1419I
Due to the host copy disabled status, all copy sources are unavailable - HYDME1420I
The local cluster showed the volume was hot - HYDME1421I
Immediate deferred. Device end returned to the host. Immediate copy was monitored - HYDME1422I
Immediate deferred. The immediate copy was not monitored - HYDME1423I
The token showed a mismatch. A retry was required - HYDME1424I
An unexpected token error occurred. A retry was required - HYDME1425I
The copy attempt to the last valid copy source failed. The copy will be performed again - HYDME1426I
The copy was cancelled - HYDME1427I
The non-immediate copy is waiting for the pending immediate copy on the same volser - HYDME1428I
Another local family member is copying the data. - HYDME1429I
Parallel copy is supported, but the volume was updated or had a scratch mount while the current copy was in progress
Parent topic: Reference