mqsichangebluemixreporting command
Use the mqsichangebluemixreporting command to configure integration servers to send data to services in IBM® Cloud. You can configure your integration servers to send startup and usage information to the IBM Cloud Product Insights service, to send logging and statistics data to the IBM Cloud Log Analysis service, or both.
Supported platforms
- Windows systems.
- Linux® and UNIX systems.
- z/OS®. Run this command by customizing and submitting BIPCHBR; see Contents of the integration node PDSE
Purpose
The IBM Cloud Log Analysis service is part of IBM Cloud (formerly Bluemix®). IBM Cloud Product Insights is a service that is available on IBM Cloud Private. Ensure that your version (and fix-pack level) of IBM Integration Bus is compatible with the level of the services that you are using, before you enable IBM Integration Bus to connect to them.
You can use the mqsichangebluemixreporting command to configure a connection to IBM Cloud Product Insights and send it startup and usage information, either for a specified integration server or for all integration servers on a specified integration node. Optionally, you can configure the connection via a specified HTTP proxy server. You can then use a dashboard in IBM Cloud to view the usage information for your integration servers, including the CPU time, resident set size, and the number of active CPUs.
You can also use the mqsichangebluemixreporting command to configure a connection to IBM Cloud Log Analysis, and send it logging data (BIP messages), Activity Log data, resource statistics, and message flow statistics and accounting data. You can then use a Kibana dashboard to view the reported data for all your integration servers across multiple integration nodes. IBM Cloud Log Analysis can also receive logging events from other products such as IBM MQ, WebSphere® Liberty, and IBM Business Process Manager, which means that you can create single queries that include events from multiple products and view the results in one place.
You run the mqsichangebluemixreporting command from the host machine that is running your integration node (typically on-premise) to activate the reporting feature, and the IBM Cloud service receives notifications at the specified times. The Product Insights service is notified each time an integration server starts, and the Log Analysis service receives data about the integration server at specified intervals.
You can run the mqsichangebluemixreporting command multiple times. Each time you run the command, only the values set by the specified parameters are updated; any other previously set values remain unchanged. For example, if you run the command once and specify only the name of the integration node and the -j (apiHost) and -k (apiKey) parameters, the configuration applies to all integration servers owned by the integration node, and the reporting state for startup and usage (which is set by the -c parameter) is set to inactive by default. You can then run the command again at a later date, setting the -c parameter to active, and all other previously set parameter values are then used for reporting the startup and usage information to the Product Insights service.
Alternatively, you might want to run the mqsichangebluemixreporting command once to configure your integration servers to send startup and usage information to the Product Insights service, and then run the command again to configure the integration servers to send logging information to the Log Analysis service. Any configuration that was set when you ran the command previously is retained unless you specify a new value for a parameter that was set previously.
The changes that are made by the mqsichangebluemixreporting command become effective the next time the integration server starts, so you must either stop and restart the integration node by using the mqsistop and mqsistart commands, or reload the integration server by running the mqsireload command.
Startup and usage reporting:
- IBM Integration Bus product ID, defined in the IBM License Metric Tool (ILMT)
- IBM Integration Bus instance identifier,
which is composed of the following information:
- IBM Integration Bus installation root directory (for example, C:/Program Files/IBM/IIB/10.0.0.7/)
- Host name
- Group name
- IBM Integration Bus integration node name
- IBM Integration Bus integration server name
- IBM Integration Bus product version
- IBM Integration Bus installation root directory (for example, C:/Program Files/IBM/IIB/10.0.0.7/)
- Host name
- Host operating system name
- Host operating system version
- All APARs that have been applied
- The URL of the IBM Integration Bus web user interface for this integration server.
- The CPU time used by the whole integration server process in the interval
- The number of active CPUs available to the integration server
process at the start of the interval. Note: For integration servers on z/OS, this value is not applicable and is set to
1
. - The resident set size in kilobytes. This value is a measure of the physical memory used by the integration server, and is displayed only for those operating systems that provide it, such as Linux and Windows.
You can override the host name that the integration server reports to IBM Cloud Product Insights, by setting the MQSI_BLUEMIXREPORTING_HOSTNAME environment variable. This can be useful if you are running the integration server in a container.
Logging and statistics data:
If you activate the logging capability (by specifying the -l parameter on the mqsichangebluemixreporting command), BIP messages that are triggered by integration server events are sent to IBM Cloud Log Analysis. The logging data that is sent contains information about the events that are issued by the integration server process; events that are initiated by other components are not reported. If you compare the contents of the local event log with the contents of the log in the Kibana dashboard, you will see that a very small number of messages at the beginning and end of the local log are not shown in the dashboard; these are typically messages about the start and end of the message logging process.
If you have configured the integration server to send statistics and accounting data to IBM Cloud Log Analysis, by specifying -o bluemix on the mqsichangeflowstats command, those statistics are also displayed on the Kibana dashboard. If you have configured the reporting of resource statistics (by using the mqsichangeresourcestats command), and Activity Log log data (by using an ActivityLog configurable service), you will also be able to view that data in the dashboard. Refer to the online Kibana documentation for information about using Kibana, and see the IBM Integration Bus Dashboard for an example of how to create your own customized dashboard. For more information, see Reporting logging and statistics data to IBM Cloud Log Analysis and displaying it in a Kibana dashboard.
- @timestamp
- ISO8601 date timestamp reported to Log Analysis
- ALCH_TENANT_ID
- IBM Cloud logging service tenant identifier
- _type
- The type of event, set to
iib_message
- host
- Host name of the server that was the source of the event
- loglevel
- Severity indicator mapped to an equivalent IBM Cloud logging level name:
- BIPnnnnE - ERROR
- BIPnnnnW - WARNING
- BIPnnnnI - INFO
- module
- "integration node name"."integration server name"
- message
- Full message text, starting with the message ID
- ibm_sequence
- Sequence number of the event, which is used to distinguish events with the same @timestamp
- ibm_messageId
- Message ID - IBM Integration Bus BIP number
- ibm_serverName
- Name of the integration server
- ibm_threadId
- Thread ID (text name)
- ibm_processId
- Process ID
Syntax
Parameters
Integration node:
- integrationNodeName
- (Required) The name of the integration node.
- -e integrationServerName
- (Optional) Specifies a single integration server for which startup, usage, and logging and statistics data will be reported. If you specify this parameter, you cannot specify the -g parameter. If neither the -e nor -g property is specified, the configuration is set as a default for all integration servers in the integration node, and is applied only to integration servers that have never been configured using the -e or -g flags.
- -g
- (Optional) Specifies that startup, usage, and logging and statistics data will be reported for all integration servers on the specified integration node. If you specify this parameter, you cannot specify an integration server name by using the -e parameter. If neither the -e nor -g property is specified, the configuration is set as a default for all integration servers in the integration node, and is applied only to integration servers that have never been configured using the -e or -g flags.
Startup and usage reporting:
- -c startupUsageState
- (Optional) Enables or disables the reporting of startup and usage
information for the integration server to the Product Insights service. Valid values are active or inactive.
When this parameter is set to active, IBM Integration Bus attempts to connect to the Product Insights service, and reports the startup
and usage information for the specified integration server (or for
all integration servers).
If this parameter is set to active, valid values must also be specified (or must have been specified previously) for the -j and -k parameters.
The reporting state is inactive by default.
- -j apiHost
- (Optional) Specifies the URL of the API host to be used for reporting
startup and usage information. The API host for your region (where
your data will be sent) is specified in your service credentials for
the Product Insights service. To find the
value that you need to specify for the -j, check
the API host information that is specified in the credentials for
your service instance. For more information about how to check your
service credentials, see Configuring the IBM Cloud Product Insights service.
A value for this parameter must be specified (or must have been specified previously) if the -c parameter is set to active.
- -k apiKey
- (Optional) Specifies the API key for the startup and usage service.
The API key is specified in your service credentials for the Product Insights service. To find the value that
you need to specify for the -k parameter, check
the API key information that is specified in the credentials for your
service instance. For more information about how to check your service
credentials, see Configuring the IBM Cloud Product Insights service.
A value for this parameter must be specified (or must have been specified previously) if the -c parameter is set to active.
- -y httpProxy
- (Optional) Specifies the address of a proxy server, in the form hostname:port.
Use this option to enable your integration servers to connect to the Product Insights service through an HTTP proxy
server. You can remove the setting for a previously specified proxy
server by setting the -y parameter to
""
. For more information, see Configuring a connection to IBM Cloud Product Insights through an HTTP proxy server. - -n groupName
- (Optional) Specifies a group name for the integration server. When details of integration servers are viewed in the Product Insights service, they are grouped together according to the name that is specified by this parameter. If this parameter is specified, integration servers are grouped according to the group name and then by integration node within the group. If this parameter is not specified, integration servers are grouped by integration node only.
- -m intMinutes
- (Optional) Specifies the reporting interval for the usage service, in minutes. The default value is 15.
Logging and statistics services:
- -l loggingState
- (Optional) Enables or disables the reporting of logging
and statistics data for the integration server to the Log Analysis service. Valid values
are active or inactive.
If this parameter is set to active, valid values must also be specified (or must have been specified previously) for the -x (hostname:portnumber) and -a (space) parameters.
The logging state is inactive by default.
- -r region
- (Optional) Specifies the IBM Cloud region
for logging and statistics services. You can use the -r parameter
to specify an IBM Cloud API endpoint,
such as
https://api.ng.bluemix.net
for the us-south region, orhttps://api.eu-gb.bluemix.net
for the eu-gb region. Alternatively, you can use the region names us-south or eu-gb. If you specify an IBM Cloud API endpoint, the Log Analysis host and port are obtained dynamically from an IBM Cloud service, rather than being set with a static value. For more information, see Configuring an integration server to send logging and statistics data to a Log Analysis service in IBM Cloud. - -o organization
- (Optional) Specifies the IBM Cloud organization for logging and statistics services. For more information, see Configuring an integration server to send logging and statistics data to a Log Analysis service in IBM Cloud.
- -a space
- (Optional) Specifies the IBM Cloud space for logging and statistics services. For more information, see Configuring an integration server to send logging and statistics data to a Log Analysis service in IBM Cloud.
- -u username
- (Optional) Sets the IBM Cloud user name for logging and statistics services. For more information, see Configuring an integration server to send logging and statistics data to a Log Analysis service in IBM Cloud.
- -p password
- (Optional) Specifies the IBM Cloud password for the logging and statistics service. For more information, see Configuring an integration server to send logging and statistics data to a Log Analysis service in IBM Cloud.
- -s intSeconds
- (Optional) Specifies the interval, in seconds, for sending information
to the logging and statistics service. The minimum value is
1
, the maximum value is300
, and the default value is60
.Note: If the integration server is raising an exceptionally high rate of BIP message events, the integration server will send data more often than the configured interval.
Logging and statistics services (manual configuration):
- -x logmetHost
- (Optional) Specifies the host name and, optionally, the port number for logging and statistics services, in the form hostname:portnumber. For more information, see Configuring an integration server and loading the IBM Integration Bus Kibana dashboard (manual method).
- -i spaceIdentifier
- (Optional) Specifies the IBM Cloud space identifier for logging and statistics services. For more information, see Configuring an integration server and loading the IBM Integration Bus Kibana dashboard (manual method).
- -t loggingToken
- (Optional) Specifies the IBM Cloud logging token for logging and statistics services. For more information, see Configuring an integration server and loading the IBM Integration Bus Kibana dashboard (manual method).
Authorization
- Security requirements for Linux and UNIX platforms
- Security requirements for Windows systems
- Security requirements for z/OS
Examples
Always enter the command on a single line; in some examples, line breaks have been added to enhance readability.
myIntegrationServer3
. mqsichangebluemixreporting myIntegrationNode1 -e myIntegrationServer3 -c active
-n Test -j https://productinsights-api.ng.bluemix.net -m 15
-k ab232e28-6aed-4365-8996-7457d176b0c7
As an alternative to specifying a particular integration server (by using the -e parameter), you can set the -g parameter to enable reporting for all integration servers on the specified integration node.
The -j parameter specifies the API host for your region (where your data will be sent), as specified in your service credentials. To find your API host, check the information that is specified in the credentials for your service instance, as described in Configuring the IBM Cloud Product Insights service.
The -k parameter specifies the API key, which you can also obtain by following the instructions in Configuring the IBM Cloud Product Insights service.
active
,
and specifies that the startup and usage information will be sent
via the proxy server that is specified by the -y parameter
(https:mygateway.co.uk):mqsichangebluemixreporting TESTNODE -g -c active -j https://hybridconnect-api.ng.bluemix.net
-k 9ec5g5c2-c5m1-3287-b2xd-c371fc22d467 -y https:mygateway.co.uk
You
can remove the setting for a previously specified proxy server by
setting the -y parameter to ""
.
For example:mqsichangebluemixreporting TESTNODE -g -c active -j https://hybridconnect-api.ng.bluemix.net
-k 9ec5g5c2-c5m1-3287-b2xd-c371fc22d467 -y ""
mqsichangebluemixreporting myIntegrationNode1 -g -l active -r https://api.ng.bluemix.net
-o a.user@comp.com -a dev -u a.user@comp.com -p password123