IBM Spectrum Protect Version 7.1.11.000 fix pack readme files

The following readme files are available for the components in this release:

• Readme file - IBM Spectrum Protect server Fix Pack 7.1.11.000
• Readme file - IBM Spectrum Protect device support for Fix Pack 7.1.11.000
• Readme file - IBM Spectrum Protect Operations Center Fix Pack 7.1.11.000

---

 

The IBM Spectrum Protect server provides backup, archive, and space management services to clients. You can set up multiple servers in your enterprise network to balance storage, processor, and network resources.

The following information is for IBM Spectrum Protect server Fix Pack 7.1.11.000.

Fix history
To view APARs that are resolved in this fix pack, see technote 515761.

Compatibility with earlier versions
For compatibility with earlier versions, see technote 660949.

System requirements
For server system requirements, see technote 556913.

Obtaining the server installation package
Download this fix pack from Fix Central.

The server package on Fix Central does not contain the license. If you are upgrading from Version 7.1 or later, the installed license is compatible with this fix pack.

Installing and upgrading

For installation and upgrade instructions, see the procedure for your operating system:

• IBM AIX
• HP-UX
• Linux®
• Oracle Solaris
• Microsoft® Windows

Restriction: If an IBM Spectrum Protect V7.1.11 server is installed on a Microsoft Windows operating system, and you plan to run the client on the same computer, the client must be at level 7.1.8.2 or later, or 8.1.4.1 or later. If the client is at an earlier level, the client might be unable to access the client key database and might fail to communicate with the server.

Restrictions on upgrading the server from V7 to V8

The following upgrade paths are not possible:

• From V7.1.7.200 and all later V7 levels to V8.1.0
• From V7.1.8 and all later V7 levels to V8.1.0, V8.1.1, or V8.1.2

To upgrade an IBM Spectrum Protect server from V7.1.7.200 or later to V8, upgrade the server directly to V8.1.1 or later.

To upgrade an IBM Spectrum Protect server from V7.1.8 or later to V8, upgrade the server directly to V8.1.3 or later.

Updates, limitations, and known problems

Updates, limitations, and known problems are documented in the form of technotes in the Support knowledge base at the Support Portal. As problems are discovered and resolved, IBM Software Support updates the knowledge base. By searching the knowledge base, you can find workarounds or solutions to problems.

Updates

Attention: Update for the DSMSERV RESTORE DB utility

IBM Software Support might provide information about additional product updates as technotes at the Support Portal.

Limitations and known issues

The following table lists limitations and known issues for this fix pack:

Issue	Description
Restrictions on documentation, online help, and language packages.	IBM Knowledge Center is not updated for the V7.1.11.000 release. For the latest available documentation, see the V7.1.8.000 documentation collection. The command-line help is not updated for the V7.1.11.000 release. The command-line help is at level 7.1.8.000 and is compatible with 7.1.11.000. The language packages are not updated for the V7.1.11.000 release. The language packages are at level 7.1.8.000 and are compatible with 7.1.11.000.
Error when starting the configuration wizard on the HP-UX operating system.	If you install an IBM Spectrum Protect V7.1.7.500 to V7.1.11.000 server on the HP-UX operating system, you might see the following error when you attempt to start the configuration wizard (dsmicfgx): Return code was received while validating user. Specify a different user ID and password. To resolve the issue, instead of running the configuration wizard, create the server instance manually. Follow the instructions in Creating the user ID and directories for the server instance.
Errors during operations to back up or restore the server database.	An error might occur if you installed an IBM Spectrum Protect V7.1.11, V7.1.10, V7.1.9, V7.1.8, V8.1.2, or V8.1.4 client on the same computer where the server is installed. During operations to back up or restore the server database, the following error message might be displayed: ANR4588E A database backup configuration might be incorrect. This error is caused by incompatibilities in the IBM Global Security Kit (GSKit). To resolve the error, take one of the following actions: Ensure that the client is not installed on the same computer as the server. Upgrade the client to a level that includes GSKit 8.0.50.86 or later. You can install a client at level 7.1.8.2 or later, or 8.1.4.1 or later. Alternatively, complete the following steps: 1. Locate the following directory: C:\Program Files\Common Files\ Tivoli\TSM\api64\gsk8\lib64 2. Change the directory name to the following name: C:\Program Files\Common Files\ Tivoli\TSM\api64\gsk8\lib64.orig 3. Copy the directory C:\Program Files\IBM\gsk8\lib64 into the following directory: C:\Program Files\Common Files\ Tivoli\TSM\api64\gsk8\
Restrictions on cloud storage.	To use an OpenStack storage system on premises or off premises with Swift, you must use OpenStack Swift Release Series Juno, Service Project keystone, application programming interface (API) Version 1 or 2. Cloud storage pools are not supported on HP-UX, Linux on Power Systems, or Linux on System z operating systems.
Restrictions on the use of Aspera® Fast Adaptive Secure Protocol (FASP®) technology to optimize data transfer.	Aspera FASP technology is available only on Linux x86_64 operating systems. To optimize data transfer, both servers must be running on a Linux x86_64 operating system. When you define or update a server in a replication pair by using the DEFINE SERVER or UPDATE SERVER command, ensure that the HLADDRESS parameter is specified in the correct format. This restriction also applies when you use the Operations Center to define a replication pair. For high-level addresses, use only IP addresses in IPv4 format or addresses that resolve to IPv4 addresses. Do not specify an Internet Protocol version 6 (IPv6) address or an address that resolves to an IPv6 address. This type of address includes one or more colons. Use of an IPv6 address results in connection errors or I/O failures.
Traditional Chinese characters are not correctly displayed in IBM Spectrum Protect V7.1.3 through V7.1.11 on Microsoft Windows Server 2012 R2.	If you set the region and display language to Traditional Chinese on an IBM Spectrum Protect server that is running on a Microsoft Windows Server 2012 R2 operating system, the server does not correctly display the Chinese characters.
Issues with starting IBM Spectrum Protect servers on SPARC 64-X processors.	If you are using a Solaris system with a SPARC 64-X processor, see technote 278229 for more system configuration information.
Caching policy for storage systems might cause data corruption.	For storage systems that have aggressive caching policies in which data is confirmed as written before it is committed to permanent storage, data corruption can occur if a power outage or other event occurs that prevents the write cache from being committed. The write cache typically has a battery to prevent loss of data from the cache during short power outages. If a power outage occurs and a battery is not available, the battery cache is full, the length of the power outage exceeds battery capacity, or another event occurs that prevents the write cache from being committed, any data that IBM Spectrum Protect is managing can become corrupted. This data includes the location of data, the size of the volumes to which data was written, and deduplication information that links data to multiple objects. For more information about requirements for committing cached data to permanent storage, see technote 330991.
Network connection to a NetApp file server becomes unresponsive during a logical interface (LIF) failover.	When IBM Spectrum Protect is configured for network data management protocol (NDMP) operations in a NetApp clustered environment, the network connection to the NetApp file server might become unresponsive during backup operations. You might experience this issue when a LIF failover occurs in the NetApp cluster. IBM Spectrum Protect does not support LIF failovers for NDMP operations.
IBM Tivoli Monitoring for Tivoli Storage Manager is not available in the V7.1.11.000 product release.	The Tivoli Monitoring for Tivoli Storage Manager component is not available as part of the IBM Spectrum Protect V7.1.11.000 product release. You can use Tivoli Monitoring for Tivoli Storage Manager V7.1.8.000 to monitor IBM Spectrum Protect V7.1.11.000 and earlier servers and to produce historical reports about server and client activities. However, the preferred method of monitoring the server is to use the Operations Center. For more information, see Installing and upgrading the Operations Center.

IBM Software Support might provide more information about limitations and known issues for this fix pack as technotes at the Support Portal.

---

You can use various storage devices with IBM Spectrum Protect to meet specific data protection goals.

The following information is for devices that are supported by IBM Spectrum Protect server Fix Pack 7.1.11.000.

Fix history

To view APARs that are resolved in Fix Pack 7.1.11.000, see technote 498311.

Supported devices

For information about the devices and hardware that you can use with IBM Spectrum Protect, see the support website for your operating system:

• IBM AIX, HP-UX, Oracle Solaris, and Microsoft Windows
• Linux

No new devices were introduced in Fix Pack 7.1.11.000.

Configuring devices

For information about configuring and managing devices, see Configuring and managing the storage environment.

The following table provides actions that you can take to more efficiently manage your devices and to avoid device configuration issues.
 

Action	Description
Ensure that HBAs meet requirements.	For best results, connect tape drives and tape libraries to the system on their own host bus adapter (HBA). Do not share the HBA with other device types, such as DISK.
Do not exceed the maximum number of devices that are supported by IBM Spectrum Protect.	For information about the maximum number of devices that you can use with IBM Spectrum Protect device drivers on each operating system, see technote 383063.
Review the support information for Serial Attached SCSI (SAS) device support.	SAS devices can be used with some operating system versions and architectures. For information about operating system versions and architectures for SAS devices, see technote 394713.
Review the support information for Microsoft Windows 2008 Server Core.	You can use Microsoft Windows 2008 Server Core, a minimal server installation option for the Microsoft Windows Server 2008 R2 operating system. For information about configuring devices on Microsoft Windows 2008 Server Core, see technote 359505.
Install the latest level of the Emulex HBA driver on Oracle Solaris SPARC.	To avoid IBM Spectrum Protect server hangs, install the latest level of the Emulex HBA driver on Oracle Solaris SPARC. For more information, see technote 342935.
Review requirements for running the IBM Spectrum Protect passthru driver with a non-root user ID on Linux operating systems.	For information about how a non-root user ID can use devices with the IBM Spectrum Protect passthru driver on Linux, see technote 360121. To ensure that non-root user IDs can use devices that are configured with the IBM Spectrum Protect passthru driver, specify option -g or -a in the device autoconf utility. To add read and write permissions for groups to the SCSI generic driver (sg) device files, specify option -g. To add read and write permissions for all users to the sg device files, specify option -a.
Ensure that libraries meet requirements.	IBM Spectrum Protect Extended Edition is required for a library with more than four drives or more than 48 storage slots. For a library with multiple drives, a drive element address is required for the DEFINE DRIVE and UPDATE DRIVE commands. However, if the library reports drive serial numbers, you can specify ELEMENT=AUTODETECT, and the element address is not required. Alternatively, you can automatically associate a library with its drives by issuing the PERFORM LIBACTION command and specifying ACTION=DEFINE.

---

 

The Operations Center is a web-based interface that you can use to manage your IBM Spectrum Protect environment.

The following information is for Operations Center Fix Pack 7.1.11.000.

Fix history

To view APARs that were resolved in this fix pack, see technote 246125.

Compatibility with the IBM Spectrum Protect server

For information about Operations Center compatibility with the IBM Spectrum Protect server, see technote 496593.

System requirements

For Operations Center system requirements, see technote 499473.

Obtaining the Operations Center installation package
 

Download this fix pack from Fix Central.

Installing and upgrading

For installation and upgrade instructions, see Installing and upgrading the Operations Center.

Updates

No new features were introduced in Fix Pack 7.1.11.000.

IBM Software Support might provide product update information as technotes at the Support Portal.

Limitations and known issues

The Operations Center online help is not updated for Fix Pack 7.1.11.000.

 

---

 

Copyright and trademark information:

http://www.ibm.com/legal/copytrade.shtml

Notices

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

The registered trademark Linux® is used pursuant to a sublicense from the Linux Foundation, the exclusive licensee of Linus Torvalds, owner of the mark on a world­wide basis.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other company, product, or service names may be trademarks or service marks of others.

Third-Party License Terms and Conditions, Notices and Information

The license agreement for this product refers you to this file for details concerning terms and conditions applicable to third party software code included in this product, and for certain notices and other information IBM must provide to you under its license to certain software code. The relevant terms and conditions, notices and other information are provided or referenced below. Please note that any non-English version of the licenses below is unofficial and is provided to you for your convenience only. The English version of the licenses below, provided as part of the English version of this file, is the official version.

Notwithstanding the terms and conditions of any other agreement you may have with IBM or any of its related or affiliated entities (collectively "IBM"), the third party software code identified below are "Excluded Components" and are subject to the following terms and conditions:

• the Excluded Components are provided on an "AS IS" basis
• IBM DISCLAIMS ANY AND ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS WITH RESPECT TO THE EXCLUDED COMPONENTS, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NON-INFRINGEMENT OR INTERFERENCE AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
• IBM will not be liable to you or indemnify you for any claims related to the Excluded Components
• IBM will not be liable for any direct, indirect, incidental, special, exemplary, punitive or consequential damages with respect to the Excluded Components.