Diagnostic messages

GIM000T
MESSAGE MODULE modname COULD NOT BE LOADED. SMP/E PROCESSING IS STOPPED. ABEND CODE: abncode REASON CODE: rsncode
GIM00001T
MODULE GIMKXENU COULD NOT BE LOADED. SMP/E PROCESSING IS STOPPED. ABEND CODE: abncode REASON CODE: rsncode.
GIM00002W
THE CAUSER SYSMOD SUMMARY REPORT WILL NOT CONTAIN POSSIBLE CAUSE TEXT BECAUSE MODULE GIMPCENU WAS NOT LOADED.
GIM20101I
proctype PROCESSING FAILED FOR THE ddname LIBRARY.
GIM20101W
proctype PROCESSING FAILED FOR THE ddname LIBRARY.
GIM20101E
proctype PROCESSING FAILED FOR THE ddname LIBRARY.
GIM20101S
proctype PROCESSING FAILED FOR THE ddname LIBRARY.
GIM20101T
proctype PROCESSING FAILED FOR THE ddname LIBRARY.
GIM20201W
SMP/E COULD NOT OBTAIN ENOUGH STORAGE FOR PROCESSING.
GIM20201E
SMP/E COULD NOT OBTAIN ENOUGH STORAGE FOR PROCESSING.
GIM20201S
SMP/E COULD NOT OBTAIN ENOUGH STORAGE FOR PROCESSING.
GIM20201T
SMP/E COULD NOT OBTAIN ENOUGH STORAGE FOR PROCESSING.
GIM20202I
obtnfixd TOTAL BYTES ARE RESERVED FOR ICT FIXED DATA, OF WHICH, usedfixd BYTES ARE USED. obtnvard TOTAL BYTES ARE RESERVED FOR ICT VARIABLE DATA, OF WHICH, usedvard BYTES ARE USED.
GIM20301S
THERE IS A SYNTAX ERROR IN THE COMMAND AT COLUMN colnum.
GIM20301T
THERE IS A SYNTAX ERROR IN THE COMMAND AT COLUMN colnum.
GIM20302S
THERE IS A SYNTAX ERROR IN THE MCS AT COLUMN colnum.
GIM20303E
THERE IS A SYNTAX ERROR IN THE UCL STATEMENT AT COLUMN colnum.
GIM20304E
THERE IS A SYNTAX ERROR IN THE LINKAGE EDITOR INPUT STATEMENT.
GIM20305E
THERE IS A SYNTAX ERROR IN THE ASSEMBLER INPUT STATEMENT.
GIM20306E
THERE IS A SYNTAX ERROR IN THE COPY INPUT STATEMENT.
GIM20307T
THERE IS A SYNTAX ERROR IN THE EXEC PARM STATEMENT AT CHARACTER charpos.
GIM20308E
THERE IS A SYNTAX ERROR IN THE ZONEEDIT CHANGE STATEMENT AT COLUMN colnum.
GIM20308S
THERE IS A SYNTAX ERROR IN THE ZONEEDIT CHANGE STATEMENT AT COLUMN colnum.
GIM20309W
THERE IS A SYNTAX ERROR IN OPCODE MEMBER membname AT COLUMN colnum.
GIM20310E
THERE IS A DOUBLE-BYTE CHARACTER SYNTAX ERROR IN THE command INPUT.
GIM20310S
THERE IS A DOUBLE-BYTE CHARACTER SYNTAX ERROR IN THE command INPUT.
GIM20311E
THERE IS A SYNTAX ERROR IN THE CONTROL STATEMENT AT COLUMN colnum.
GIM20311S
THERE IS A SYNTAX ERROR IN THE CONTROL STATEMENT AT COLUMN colnum.
GIM20312E
THERE IS A SYNTAX ERROR IN THE JCLIN CONTROL STATEMENT AT COLUMN colnum.
GIM20313S
THERE IS A SYNTAX ERROR IN THE CONTROL STATEMENT FROM DD STATEMENT ddstmnt AT COLUMN colnum.
GIM20314S
THERE IS A SYNTAX ERROR IN PACKAGE ATTRIBUTE FILE pafname AT COLUMN colnum.
GIM20315S
THERE IS A SYNTAX ERROR IN SMPPARM MEMBER member AT COLUMN number.
GIM20397E
REPORT CALLLIBS PROCESSING FAILED FOR ZONE zonename BECAUSE THE SMPLTS DATA SET ASSOCIATED WITH ZONE zonename HAS BEEN UPDATED BY A HIGHER LEVEL OF SMP/E SO THAT IT NO LONGER CONTAINS THE BASE VERSIONS OF ALL LOAD MODULES WITH CALLLIBS. RERUN THE JOB USING THE LINK LMODS CALLLIBS COMMAND IN SMP/E VERSION 3 RELEASE 2 OR HIGHER.
GIM20398S
command PROCESSING FAILED BECAUSE THE SMPLTS DATA SET HAS BEEN UPDATED BY A HIGHER LEVEL OF SMP/E SO THAT IT NO LONGER CONTAINS THE BASE VERSIONS OF ALL LOAD MODULES WITH CALLLIBS. RERUN THE JOB USING SMP/E VERSION 3 RELEASE 2 OR HIGHER.
GIM20399S
command PROCESSING FAILED BECAUSE SMPPTS SPILL DATA SETS ARE DEFINED. SPILL DATA SETS ARE SUPPORTED WITH APAR IR42960 on OS/390 RELEASE 5 AND HIGHER.
GIM20400E
THE DDNAME SPECIFIED BY THE operand OPERAND OF THE command COMMAND COULD NOT BE ALLOCATED. A JCL COMMENT WILL BE GENERATED EACH TIME A jclstmt IS REQUIRED.
GIM20501I
command PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS rtncode.
GIM20502I
SMP/E PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS rtncode. SMP/E IS AT LEVEL vr.ss.
GIM20503I
UNKNOWN PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS rtncode.
GIM20550W
command COMMAND RESULTS MAY BE INCOMPLETE. UNSUPPORTED ENTRIES OR SUBENTRIES WERE FOUND IN zonetype ZONE zonename. THIS DATA IS SUPPORTED ONLY BY SMP/E VERSION ver RELEASE rel OR HIGHER.
GIM20551S
command COMMAND PROCESSING FAILED. UNSUPPORTED ENTRIES OR SUBENTRIES WERE FOUND IN zonetype ZONE zonename. THIS DATA IS SUPPORTED ONLY BY SMP/E VERSION ver RELEASE rel OR HIGHER.
GIM20555S
command COMMAND PROCESSING FAILED. THE zonename ZONE WAS PREVIOUSLY UPDATED BY SMP/E VERSION newversion RELEASE newrelease PTF newptflevel AND CONTAINS INFORMATION NOT SUPPORTED BY THE CURRENT LEVEL OF SMP/E (VERSION version RELEASE release PTF ptflevel).
GIM20556S
command COMMAND PROCESSING FAILED. THE zonename ZONE WAS PREVIOUSLY UPDATED BY A HIGHER LEVEL OF SMP/E AND CONTAINS INFORMATION NOT SUPPORTED BY THE CURRENT LEVEL OF SMP/E (VERSION version RELEASE release PTF ptflevel ).
GIM20601E
SYSMOD PROCESSING STOPPED BECAUSE OF THE RETURN CODE ISSUED BY THE EXIT ROUTINE.
GIM20601S
command PROCESSING STOPPED BECAUSE OF THE RETURN CODE ISSUED BY THE EXIT ROUTINE.
GIM20601T
SMP/E PROCESSING STOPPED BECAUSE OF THE RETURN CODE ISSUED BY THE EXIT ROUTINE.
GIM20701S
command PROCESSING STOPPED BECAUSE THE EXIT ROUTINE ISSUED AN UNDEFINED RETURN CODE (rtncode).
GIM20701T
SMP/E PROCESSING STOPPED BECAUSE THE EXIT ROUTINE ISSUED AN UNDEFINED RETURN CODE (rtncode).
GIM20702S
cmdsvc PROCESSING FAILED. USER userid IS NOT AUTHORIZED TO INVOKE THE SMP/E COMMAND OR SERVICE ROUTINE.
GIM20702T
cmdsvc PROCESSING FAILED. USER userid IS NOT AUTHORIZED TO INVOKE THE SMP/E COMMAND OR SERVICE ROUTINE.
GIM20703S
cmdsvc PROCESSING FAILED. THE COMMAND OR SERVICE ROUTINE IS NOT PROTECTED BY A SECURITY MANAGER.
GIM20703T
cmdsvc PROCESSING FAILED. THE COMMAND OR SERVICE ROUTINE IS NOT PROTECTED BY A SECURITY MANAGER.
GIM20704S
cmdsvc PROCESSING FAILED. THE SYSTEM AUTHORIZATION FACILITY (SAF) WAS NOT ABLE TO DETERMINE WHETHER USER userid IS AUTHORIZED TO INVOKE THIS SMP/E COMMAND OR SERVICE ROUTINE. THE SAF RETURN CODE IS safrc. THE SECURITY MANAGER RETURN CODE IS racfrc. THE SECURITY MANAGER REASON CODE IS racfrsn.
GIM20704T
cmdsvc PROCESSING FAILED. THE SYSTEM AUTHORIZATION FACILITY (SAF) WAS NOT ABLE TO DETERMINE WHETHER USER userid IS AUTHORIZED TO INVOKE THIS SMP/E COMMAND OR SERVICE ROUTINE. THE SAF RETURN CODE IS safrc. THE SECURITY MANAGER RETURN CODE IS racfrc. THE SECURITY MANAGER REASON CODE IS racfrsn.
GIM20800E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE THE ++mcsname MCS WOULD CAUSE THE OWNERSHIP OF ELEMENT element TO CHANGE.
GIM20900E
SMP/E COULD NOT OBTAIN LINK-EDIT PARAMETERS FOR LOAD MODULE loadmod FOR SYSMOD sysmod. MEMBER modname WAS NOT FOUND IN dataset DATA SET dsname WHICH WAS ALLOCATED TO DDNAME ddname.
GIM21000E
SYSMOD sysmod WAS NOT RECEIVED BECAUSE MORE THAN ONE ARCHIVE FILE WAS FOUND AS A MATCH FOR RELFILE relfile IN THE package PACKAGE.
GIM21100E
SYSMOD sysmod CONTAINS MORE THAN ONE ++RENAME STATEMENT WITH LMOD loadmod. THIS IS NOT ALLOWED.
GIM21200E
THE NAME OF THE RELATED ZONE CANNOT BE GLOBAL.
GIM21200S
THE NAME OF THE RELATED ZONE CANNOT BE GLOBAL.
GIM21300W
SYSMOD sysmod1 CONTAINS MORE THAN ONE ++HOLD MCS FOR REASON ID reasonid WITH SYSMOD ID sysmod2. ONLY THE HOLDDATA FROM THE LAST ++HOLD WITH THIS REASON ID AND SYSMOD ID IS SAVED.
GIM21401E
enttype ENTRY entname COULD NOT BE STORED IN THE library LIBRARY.
GIM21402W
enttype ENTRY entname COULD NOT BE STORED IN THE zonename ZONE.
GIM21402E
enttype ENTRY entname COULD NOT BE STORED IN THE zonename ZONE.
GIM21402S
enttype ENTRY entname COULD NOT BE STORED IN THE zonename ZONE.
GIM21402T
enttype ENTRY entname COULD NOT BE STORED IN THE zonename ZONE.
GIM21500W
PREALLOCATED SMPTLIB DATA SET smptlib HAS A DSNTYPE OF dsntype1. THIS DIFFERS FROM THE DSNTYPE OF dsntype2 FOR THE CORRESPONDING RELFILE DATA SET relfile.
GIM21601E
UPDATE PROCESSING FOR SYSMOD sysmod FAILED FOR MEMBER elmname IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM21602I
UPDATE PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MEMBER elmname IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM21602W
UPDATE PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MEMBER elmname IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM21603E
UPDATE PROCESSING FOR SYSMOD sysmod FAILED FOR MEMBER member IN THE library LIBRARY. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM21700W
SMP/E COULD NOT DETERMINE THE DSNTYPE OF RELFILE DATA SET relfile.
GIM21801I
enttype ENTRY entname WAS STORED IN THE library LIBRARY.
GIM21802I
enttype ENTRY entname WAS STORED IN THE zonename ZONE.
GIM21803I
MEMBER member WAS STORED IN THE library LIBRARY.
GIM21901W
enttype ENTRY entname IN THE library LIBRARY WAS NOT PROCESSED BECAUSE THE PEMAX VALUE IN THE CURRENT OPTIONS ENTRY WAS EXCEEDED.
GIM21901E
enttype ENTRY entname IN THE library LIBRARY WAS NOT PROCESSED BECAUSE THE PEMAX VALUE IN THE CURRENT OPTIONS ENTRY WAS EXCEEDED.
GIM21901S
enttype ENTRY entname IN THE library LIBRARY WAS NOT PROCESSED BECAUSE THE PEMAX VALUE IN THE CURRENT OPTIONS ENTRY WAS EXCEEDED.
GIM21902W
enttype ENTRY entname IN THE zonename ZONE WAS NOT PROCESSED BECAUSE THE PEMAX VALUE IN THE CURRENT OPTIONS ENTRY WAS EXCEEDED.
GIM21902E
enttype ENTRY entname IN THE zonename ZONE WAS NOT PROCESSED BECAUSE THE PEMAX VALUE IN THE CURRENT OPTIONS ENTRY WAS EXCEEDED.
GIM21902S
enttype ENTRY entname IN THE zonename ZONE WAS NOT PROCESSED BECAUSE THE PEMAX VALUE IN THE CURRENT OPTIONS ENTRY WAS EXCEEDED.
GIM21903E
ENTRY entname IN THE zonename ZONE WAS NOT PROCESSED BECAUSE THE PEMAX VALUE IN THE CURRENT OPTIONS ENTRY WAS EXCEEDED.
GIM21904E
ENTRY entname IN THE library LIBRARY WAS NOT PROCESSED BECAUSE THE PEMAX VALUE IN THE CURRENT OPTIONS ENTRY WAS EXCEEDED.
GIM22000I
AN ERROR MAY OCCUR WHEN RELFILE DATA SET relfile IS COPIED TO THE SMPTLIB DATA SET smptlib.
GIM22100E
THE NAME OF THE TARGET OR DISTRIBUTION ZONE CANNOT BE GLOBAL.
GIM22200E
SYSMOD sysmod WAS NOT RECEIVED BECAUSE AN ARCHIVE FILE FOR RELFILE relfile WAS NOT FOUND IN THE package PACKAGE.
GIM22300E
JCLIN PROCESSING FAILED BECAUSE THE JCL STATEMENT DID NOT BEGIN IN COLUMN 1.
GIM22401I
enttype entname WAS DELETED FROM THE library LIBRARY.
GIM22402I
enttype1 entname1 (ALIAS OF enttype2 entname2) WAS DELETED FROM THE library LIBRARY.
GIM22403I
MEMBER member WAS DELETED FROM THE library LIBRARY.
GIM22404I
enttype ENTRY entname WAS DELETED FROM THE zonename ZONE.
GIM22405I
FILE filename WAS REMOVED FROM THE library LIBRARY.
GIM22406I
FILE filename (LINK FOR enttype entname) WAS REMOVED FROM THE library LIBRARY.
GIM22407I
MEMBER member (SIDE DECK FOR LMOD loadmod) WAS DELETED FROM THE library LIBRARY.
GIM22408I
FILE filename (SYMBOLIC LINK FOR enttype entname) WAS REMOVED FROM THE library LIBRARY.
GIM22500W
SMP/E CANNOT ALLOCATE SMPTLIB DATA SET smptlib WITH A DSNTYPE OF LIBRARY.
GIM22601I
command PROCESSING FAILED FOR SYSMOD sysmod.
GIM22601E
command PROCESSING FAILED FOR SYSMOD sysmod.
GIM22602E
command PROCESSING WAS INCOMPLETE FOR SYSMOD sysmod.
GIM22603E
command PROCESSING FAILED FOR SYSMOD sysmod. SYSMOD sysmod WOULD HAVE UPDATED THE library LIBRARY, BUT THE library LIBRARY IS OUT OF SPACE.
GIM22701I
command PROCESSING WAS SUCCESSFUL FOR SYSMOD sysmod.
GIM22800S
REPLY FROM THE FTP SERVER AT location WAS NOT RECEIVED AFTER number ATTEMPTS.
GIM22805S
THE CONNECTION WITH THE FTP SERVER AT hostname WAS UNEXPECTEDLY CLOSED.
GIM22901S
THE COMMAND WAS NOT PROCESSED BECAUSE OF A PREVIOUS ERROR.
GIM23101E
THERE IS A SYNTAX ERROR IN A ZAP CONTROL STATEMENT FOR MODULE modname IN SYSMOD sysmod.
GIM23200S
LMOD loadmod WAS SPECIFIED ON THE LINK COMMAND BUT IS NOT IN ZONE zonename.
GIM23300W
ALIAS alias FOR enttype entname WAS NOT INSTALLED INTO THE LIBRARY library BECAUSE THE LIBRARY IS SEQUENTIAL.
GIM23401T
PROGRAM progname WAS REQUIRED FOR SMP/E PROCESSING BUT WAS NOT AVAILABLE.
GIM23402T
A BLDL FAILED FOR PROGRAM progname THAT IS REQUIRED FOR SMP/E PROCESSING. THE RETURN CODE WAS rtncode.
GIM23403T
TOKEN SERVICES ARE REQUIRED FOR GIMAPI PROCESSING BUT ARE NOT AVAILABLE.
GIM23411I
DATA INTEGRITY VERIFICATION WILL NOT BE PERFORMED ON PACKAGE package-id BECAUSE ICSF IS NOT AVAILABLE AND AN ATTEMPT TO USE AN ALTERNATE SERVICE HAS FAILED.
GIM23412S
command COMMAND PROCESSING HAS FAILED. DATA INTEGRITY VERIFICATION CAN NOT BE PERFORMED ON PACKAGE package-id BECAUSE ICSF IS NOT AVAILABLE AND AN ATTEMPT TO USE AN ALTERNATIVE SERVICE HAS FAILED.
GIM23413S
program PROCESSING HAS FAILED. DATA INTEGRITY VERIFICATION CAN NOT BE PERFORMED BECAUSE ICSF IS NOT AVAILABLE AND AN ATTEMPT TO USE AN ALTERNATE SERVICE HAS FAILED.
GIM23500I
LIBRARY library WAS NOT COMPRESSED BECAUSE IT IS A SEQUENTIAL DATA SET.
GIM23600E
command PROCESSING TO THE library LIBRARY FAILED FOR enttype entname IN SYSMOD sysmod. DATE yy.ddd — TIME hh:mm:ss
GIM23700E
SMP/E PROCESSING TO THE library LIBRARY FAILED FOR enttype entname IN SYSMOD sysmod. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss
GIM23701E
ZAP VER PROCESSING FOR SYSMOD sysmod FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23702I
ZAP VER PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23702W
ZAP VER PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23703E
ZAP REP PROCESSING FOR SYSMOD sysmod FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23704I
ZAP REP PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23704W
ZAP REP PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23800E
SMP/E PROCESSING FROM THE library LIBRARY TO THE library LIBRARY FAILED FOR enttype entname IN SYSMOD sysmod. THERE IS AN INCONSISTENCY IN THE DATA ATTRIBUTES. REASON CODE IS rtncode. DATE yy.ddd — TIME hh:mm:ss
GIM23801E
COPY PROCESSING TO THE library LIBRARY FAILED FOR MODULE modname IN LMOD loadmod IN SYSMOD sysmod. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23802I
COPY PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN SYSMOD sysmod. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23802W
COPY PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN SYSMOD sysmod. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23803E
COPY PROCESSING TO THE library LIBRARY FAILED FOR MODULE modname IN LMOD loadmod IN SYSMOD sysmod. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23901E
LINK-EDIT PROCESSING FOR SYSMOD sysmod FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23902E
LINK-EDIT PROCESSING FOR LOAD MODULE BUILD PROCESSING FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23903I
LINK-EDIT PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23903W
LINK-EDIT PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23904I
LINK-EDIT PROCESSING FOR LOAD MODULE BUILD PROCESSING WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23904W
LINK-EDIT PROCESSING FOR LOAD MODULE BUILD PROCESSING WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23905E
LINK-EDIT PROCESSING FOR SYSMOD sysmod FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23906E
LINK-EDIT PROCESSING FOR LOAD MODULE BUILD PROCESSING FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23907W
LINK-EDIT PROCESSING FAILED FOR MOD modname IN LMOD loadmod IN ZONE xzone IN SYSLIB syslib. ABEND abncode OCCURRED WHILE PROCESSING syslib. THE syslib LIBRARY RAN OUT OF SPACE.
GIM23908E
LINK PROCESSING FAILED FOR LMOD loadmod IN SYSLIB syslib. ABEND abncode OCCURRED WHILE PROCESSING syslib. THE syslib LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM23911E
LINK-EDIT PROCESSING FOR SYSMOD sysmod FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd — TIME hh:mm:ss — SEQUENCE NUMBER seqno — SYSPRINT FILE sysprint.
GIM23912E
LINK-EDIT PROCESSING FOR LOAD MODULE BUILD PROCESSING FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd — TIME hh:mm:ss — SEQUENCE NUMBER seqno — SYSPRINT FILE sysprint.
GIM23913I
LINK-EDIT PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd — TIME hh:mm:ss — SEQUENCE NUMBER seqno — SYSPRINT FILE sysprint.
GIM23913W
LINK-EDIT PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd — TIME hh:mm:ss — SEQUENCE NUMBER seqno — SYSPRINT FILE sysprint.
GIM23914I
LINK-EDIT PROCESSING FOR LOAD MODULE BUILD PROCESSING WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd — TIME hh:mm:ss — SEQUENCE NUMBER seqno — SYSPRINT FILE sysprint.
GIM23914W
LINK-EDIT PROCESSING FOR LOAD MODULE BUILD PROCESSING WAS SUCCESSFUL FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd — TIME hh:mm:ss — SEQUENCE NUMBER seqno — SYSPRINT FILE sysprint.
GIM23915E
LINK-EDIT PROCESSING FOR SYSMOD sysmod FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd — TIME hh:mm:ss — SEQUENCE NUMBER seqno — SYSPRINT FILE sysprint.
GIM23916E
LINK-EDIT PROCESSING FOR LOAD MODULE BUILD PROCESSING FAILED FOR MODULE modname IN LMOD loadmod IN THE library LIBRARY. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd — TIME hh:mm:ss — SEQUENCE NUMBER seqno — SYSPRINT FILE sysprint.
GIM23918E
LINK PROCESSING FAILED FOR LMOD loadmod IN SYSLIB syslib. ABEND abncode OCCURRED WHILE PROCESSING syslib. THE syslib LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno - SYSPRINT FILE sysprint.
GIM24001E
ASSEMBLER PROCESSING FOR SYSMOD sysmod FAILED FOR MODULE modname IN THE library LIBRARY. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss.
GIM24002E
ASSEMBLER PROCESSING FAILED FOR MODULE modname IN THE library LIBRARY WHICH IS NEEDED TO BUILD LOAD MODULE loadmod. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss.
GIM24003I
ASSEMBLER PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss.
GIM24003W
ASSEMBLER PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR MODULE modname IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss.
GIM24004I
ASSEMBLER PROCESSING FOR LOAD MODULE BUILD PROCESSING WAS SUCCESSFUL FOR MODULE modname IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss.
GIM24004W
ASSEMBLER PROCESSING FOR LOAD MODULE BUILD PROCESSING WAS SUCCESSFUL FOR MODULE modname IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss.
GIM24005E
ASSEMBLER PROCESSING FOR SYSMOD sysmod FAILED FOR MODULE modname IN THE library LIBRARY. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss.
GIM24006E
ASSEMBLER PROCESSING FAILED FOR MODULE modname IN THE library LIBRARY WHICH IS NEEDED TO BUILD LOAD MODULE loadmod. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss.
GIM24007E
command PROCESSING FAILED FOR LOAD MODULE loadmod. MODULE modname IS NEEDED TO BUILD loadmod BUT COULD NOT BE ASSEMBLED BECAUSE THE ddname LIBRARY IS FULL.
GIM24008E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod. MODULE modname IN THE ddname LIBRARY IS NEEDED TO BUILD loadmod, BUT ASSEMBLER PROCESSING HAS FAILED FOR modname. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss.
GIM24009E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod. MODULE modname IN THE ddname LIBRARY IS NEEDED TO BUILD loadmod, BUT ASSEMBLER PROCESSING HAS FAILED FOR modname. ABEND abncode OCCURRED WHILE PROCESSING ddname. THE ddname LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss.
GIM24100I
SMP/E PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR enttype entname IN SYSMOD sysmod. DATE yy.ddd - TIME hh:mm:ss
GIM24200E
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode DURING SMP/E PROCESSING. THE ddname LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT IS SEQUENTIAL.
GIM24300E
LIBRARY library IS SEQUENTIAL YET enttype1 entname1 IS ALREADY ASSIGNED TO IT. SMP/E PROCESSING HAS FAILED FOR enttype2 entname2 IN SYSMOD sysmod.
GIM24400S
command PROCESSING FAILED. UNSUPPORTED KEYWORD keyword WAS FOUND IN THE dsname DATA SET. THIS DATA IS SUPPORTED ONLY BY SMP/E vv.rr, OR HIGHER.
GIM24501E
RESTORE PROCESSING FAILED FOR SYSMOD sysmod BECAUSE OTHER SYSMODS WERE DELETED WHEN sysmod WAS APPLIED.
GIM24502E
RESTORE PROCESSING FAILED FOR SYSMOD sysmod BECAUSE sysmod WAS PREVIOUSLY ACCEPTED.
GIM24503E
RESTORE PROCESSING FAILED FOR SYSMOD sysmod BECAUSE sysmod WAS PREVIOUSLY DELETED.
GIM24504E
RESTORE PROCESSING FAILED FOR SYSMOD sysmod BECAUSE sysmod HAS NOT BEEN APPLIED.
GIM24505E
RESTORE PROCESSING FAILED FOR SYSMOD sysmod1 BECAUSE sysmod1 WAS PREVIOUSLY SUPERSEDED BY SYSMOD sysmod2.
GIM24506W
SYSMOD sysmod SELECTED FOR RESTORE PROCESSING IS SUPERSEDED.
GIM24601I
enttype ENTRY entname IS NEEDED FOR PROCESSING BUT IS NOT IN THE library LIBRARY.
GIM24601W
enttype ENTRY entname IS NEEDED FOR PROCESSING BUT IS NOT IN THE library LIBRARY.
GIM24601E
enttype ENTRY entname IS NEEDED FOR PROCESSING BUT IS NOT IN THE library LIBRARY.
GIM24602W
enttype ENTRY entname IS NEEDED TO PROCESS SYSMOD sysmod BUT IS NOT IN THE library LIBRARY.
GIM24602E
enttype ENTRY entname IS NEEDED TO PROCESS SYSMOD sysmod BUT IS NOT IN THE library LIBRARY.
GIM24603E
enttype ENTRY entname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod BUT IS NOT IN THE library LIBRARY.
GIM24605E
SYSMOD sysmod WAS SELECTED FOR REJECT PROCESSING BUT IT WAS NOT FOUND IN THE SMPPTS DATA SET.
GIM24606E
enttype ENTRY entname IS NEEDED FOR PROCESSING BUT IS NOT IN THE zonename ZONE.
GIM24606S
enttype ENTRY entname IS NEEDED FOR PROCESSING BUT IS NOT IN THE zonename ZONE.
GIM24607E
THE enttype ENTRY IS NEEDED TO PROCESS SYSMOD sysmod BUT IS NOT IN THE library LIBRARY.
GIM24608E
SHELLSCR ENTRY shellscr IS NEEDED TO PROCESS enttype entname FOR SYSMOD sysmod, BUT SHELLSCR shellscr IS NOT IN THE zonename ZONE.
GIM24609E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE enttype ENTRY entname IS NEEDED TO BUILD loadmod BUT IS NOT IN ZONE zonename.
GIM24701W
SMP/E COULD NOT OBTAIN LINK-EDIT PARAMETERS FOR LOAD MODULE loadmod FOR SYSMOD sysmod. DEFAULTS WERE USED.
GIM24801W
NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE command COMMAND.
GIM24801S
NO SYSMODS SATISFIED THE OPERANDS SPECIFIED ON THE command COMMAND.
GIM24901E
SYSMOD sysmod FAILED BECAUSE THE SAME MODULE (modname) WAS SPECIFIED ON DIFFERENT TYPES OF ZAP NAME STATEMENTS.
GIM25000W
LMOD loadmod CONTAINS subtype SUBENTRIES. subtype INFORMATION IS NOT INCLUDED IN FUNCTION fmid FROM THE EXISTING ZONE ENTRIES.
GIM25101S
WHEN THE operand OPERAND IS SPECIFIED, THE command COMMAND MUST SPECIFY AT LEAST ONE zonetype ZONE.
GIM25201E
THE INDICATED COMMAND IS INCOMPLETE. IT MAY BE MISSING DATA OR A DELIMITER, OR A PREVIOUS COMMAND MAY BE MISSING A PARENTHESIS.
GIM25201T
THE INDICATED COMMAND IS INCOMPLETE. IT MAY BE MISSING DATA OR A DELIMITER, OR A PREVIOUS COMMAND MAY BE MISSING A PARENTHESIS.
GIM25301E
enttype ENTRY entname WAS NOT DELETED BECAUSE IT DOES NOT EXIST.
GIM25401E
value IS NOT DEFINED AS A ZONE OR A ZONESET IN THE GLOBAL ZONE.
GIM25401S
value IS NOT DEFINED AS A ZONE OR A ZONESET IN THE GLOBAL ZONE.
GIM25501I
ENTRY entname WAS UPDATED BY UCLIN.
GIM25601I
THE SPECIFIED ENTRY WAS NOT UPDATED BECAUSE OF AN ERROR DURING UCLIN PROCESSING.
GIM25602I
ENTRY entname WAS NOT UPDATED BY UCLIN.
GIM25701E
THE SPECIFIED CHANGES WERE NOT PROCESSED BECAUSE THEY WOULD LEAVE THE ENTRY INCOMPLETE. subtype IS REQUIRED.
GIM25801E
command1 PROCESSING FAILED BECAUSE SMP/E REACHED THE END-OF-FILE WITHOUT FINDING THE command2 COMMAND.
GIM25901E
SMP/E COULD NOT ADD subtype SUBENTRY subentry TO enttype ENTRY entname BECAUSE THE NUMBER OF ELEMENTS IN THE ENTRY EXCEEDED THE CURRENT PEMAX VALUE.
GIM25902E
SMP/E COULD NOT ADD subtype SUBENTRY subentry TO enttype ENTRY entname IN THE SMPSCDS DATA SET BECAUSE THE NUMBER OF ELEMENTS IN THE ENTRY EXCEEDED THE CURRENT PEMAX VALUE.
GIM25903E
SMP/E COULD NOT ADD ++ASSIGN SOURCEID sourceid TO SYSMOD ENTRY sysmod BECAUSE THE NUMBER OF ELEMENTS IN THE ENTRY EXCEEDED THE CURRENT PEMAX VALUE.
GIM26001W
THE operand OPERAND WAS NOT PROCESSED BECAUSE IT IS NOT ALLOWED FOR THE SMPTLIB DATA SET.
GIM26002E
UCLIN PROCESSING FAILED BECAUSE THE operand OPERAND IS NOT ALLOWED FOR THE SMPTLIB DATA SET.
GIM26003S
THERE IS AN ERROR IN A GIMDDALC CONTROL STATEMENT. THE operand OPERAND IS NOT ALLOWED FOR THE SMPTLIB DATA SET.
GIM26004W
THE operand OPERAND IS BEING IGNORED SINCE TRANSFERONLY WAS SPECIFIED ON THE RECEIVE COMMAND.
GIM26101E
THE operand OPERAND VALUE SPECIFIED ON THE UCL DEL STATEMENT DOES NOT MATCH THE EXISTING VALUE (value) IN THE ENTRY.
GIM26201I
A PREVIOUS ERROR FORCED JCLIN SCANNING TO FAIL.
GIM26301E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE ASSEM OR SRC ENTRY NAME COULD NOT BE DETERMINED.
GIM26301S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE ASSEM OR SRC ENTRY NAME COULD NOT BE DETERMINED.
GIM26302E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. AN UNKNOWN ERROR OCCURRED FOR A MODULE IN A LINK-EDIT STEP.
GIM26302S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. AN UNKNOWN ERROR OCCURRED FOR A MODULE IN A LINK-EDIT STEP.
GIM26303E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THERE IS A SYNTAX ERROR IN THE COPY CONTROL STATEMENT.
GIM26303S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THERE IS A SYNTAX ERROR IN THE COPY CONTROL STATEMENT.
GIM26304E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. SMP/E DID NOT RECOGNIZE THE CHARACTERS ON THE MOD OPERAND IN A LINK-EDIT STEP.
GIM26304S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. SMP/E DID NOT RECOGNIZE THE CHARACTERS ON THE MOD OPERAND IN A LINK-EDIT STEP.
GIM26305E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE MACRO NAME MUST BE FROM 1 TO 8 CHARACTERS LONG.
GIM26305S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE MACRO NAME MUST BE FROM 1 TO 8 CHARACTERS LONG.
GIM26306E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. AN I/O ERROR OCCURRED IN THE LAST LINE PROCESSED BY SMP/E.
GIM26306S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. AN I/O ERROR OCCURRED IN THE LAST LINE PROCESSED BY SMP/E.
GIM26307E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THERE IS A SYNTAX ERROR IN A LINK-EDIT CONTROL STATEMENT.
GIM26307S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THERE IS A SYNTAX ERROR IN A LINK-EDIT CONTROL STATEMENT.
GIM26308E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. SMP/E RAN OUT OF STORAGE WHILE PROCESSING AN ASSEMBLER STEP.
GIM26308S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. SMP/E RAN OUT OF STORAGE WHILE PROCESSING AN ASSEMBLER STEP.
GIM26309E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE MODULE NAME WAS NOT SPECIFIED ON A SYSLMOD DD STATEMENT OR ON A NAME STATEMENT.
GIM26309S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE MODULE NAME WAS NOT SPECIFIED ON A SYSLMOD DD STATEMENT OR ON A NAME STATEMENT.
GIM26310E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE PGM OPERAND WAS SPECIFIED ON THE EXEC STATEMENT, BUT NO SYSLMOD DD STATEMENT WAS FOUND.
GIM26310S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE PGM OPERAND WAS SPECIFIED ON THE EXEC STATEMENT, BUT NO SYSLMOD DD STATEMENT WAS FOUND.
GIM26311E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. SMP/E RAN OUT OF STORAGE WHILE PROCESSING A LINK-EDIT STEP.
GIM26311S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. SMP/E RAN OUT OF STORAGE WHILE PROCESSING A LINK-EDIT STEP.
GIM26312E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE DSNAME OPERAND WAS NOT SPECIFIED ON THE EXEC STATEMENT FOR A LINK-EDIT STEP.
GIM26312S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE DSNAME OPERAND WAS NOT SPECIFIED ON THE EXEC STATEMENT FOR A LINK-EDIT STEP.
GIM26313E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. A NAME STATEMENT WAS NOT SPECIFIED FOR THE MODULE, OR THE MOD OPERAND WAS NOT SPECIFIED ON THE EXEC STATEMENT FOR A LINK-EDIT STEP.
GIM26313S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. A NAME STATEMENT WAS NOT SPECIFIED FOR THE MODULE, OR THE MOD OPERAND WAS NOT SPECIFIED ON THE EXEC STATEMENT FOR A LINK-EDIT STEP.
GIM26314E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE LIBRARYDD COMMENT CARD IS MISSING AFTER PATH WAS SPECIFIED ON THE ddname DD STATEMENT.
GIM26314S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE LIBRARYDD COMMENT CARD IS MISSING AFTER PATH WAS SPECIFIED ON THE ddname DD STATEMENT.
GIM26315E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. NO VALUE WAS SPECIFIED ON THE LIBRARYDD COMMENT STATEMENT.
GIM26315S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. NO VALUE WAS SPECIFIED ON THE LIBRARYDD COMMENT STATEMENT.
GIM26316E
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE INCLUDE STATEMENT FOR A LINK-EDIT STEP USED A FILE NAME (MEMBER NAME) WHICH WAS UNACCEPTABLE TO SMP/E.
GIM26316S
AN ERROR OCCURRED DURING JCLIN PROCESSING OF STEP stepname IN JOB jobname. THE INCLUDE STATEMENT FOR A LINK-EDIT STEP USED A FILE NAME (MEMBER NAME) WHICH WAS UNACCEPTABLE TO SMP/E.
GIM26401E
THE dddef DDDEF ENTRY CANNOT HAVE MORE THAN ONE VOLUME SERIAL NUMBER.
GIM26501W
THE subentry SUBENTRY WAS NOT CHANGED OR ADDED IN ANY entry ENTRIES.
GIM26601I
LINKAGE EDITOR INPUT CONTAINS AN ERROR.
GIM26602I
COPY INPUT CONTAINS AN ERROR.
GIM26603I
ASSEMBLER INPUT CONTAINS AN ERROR.
GIM26701E
DIRECTORY SPACE FOR THE library LIBRARY WAS EXCEEDED DURING AN ATTEMPT TO STORE enttype ENTRY entname.
GIM26701I
DIRECTORY SPACE FOR THE library LIBRARY WAS EXCEEDED DURING AN ATTEMPT TO STORE enttype ENTRY entname.
GIM26701S
DIRECTORY SPACE FOR THE library LIBRARY WAS EXCEEDED DURING AN ATTEMPT TO STORE enttype ENTRY entname.
GIM26801E
AN I/O ERROR OCCURRED DURING AN ATTEMPT TO STORE elmtype elmname ON THE library LIBRARY.
GIM26801T
AN I/O ERROR OCCURRED DURING AN ATTEMPT TO STORE enttype entname ON THE library LIBRARY.
GIM26901T
AN I/O ERROR OCCURRED DURING BLDL PROCESSING FOR enttype entname ON THE library LIBRARY.
GIM26902T
AN I/O ERROR OCCURRED DURING BLDL PROCESSING FOR enttype entname ON THE zonename ZONE.
GIM27001I
THE library LIBRARY WAS NOT PROTECTED BECAUSE RACF IS NOT ACTIVE OR NOT INSTALLED.
GIM27002I
DATA SET dataset WAS NOT PROTECTED BECAUSE RACF IS NOT ACTIVE OR NOT INSTALLED.
GIM27101E
SMPTLIB smptlib WAS NOT PROTECTED BECAUSE THE USER IS NOT DEFINED TO RACF.
GIM27201S
THE operand OPERAND IS NOT ALLOWED IN REJECT MASS MODE.
GIM27301W
THE ELEMENT OR JCLIN DATA (TEXT OR OBJECT) IS MISSING.
GIM27301E
THE ELEMENT OR JCLIN DATA (TEXT OR OBJECT) IS MISSING.
GIM27301S
THE ELEMENT OR JCLIN DATA (TEXT OR OBJECT) IS MISSING.
GIM27401E
I/O ERROR - jobname, stepname, address, device, lib, action, description, access_method, optional_PDSE_data I/O ERROR - jobname, stepname, address, device, lib, action, description, rbn, access_method, optional_PDSE_data I/O ERROR - jobname, stepname, address, device, lib, action, description, track_address, block_number, access_method, optional_PDSE_data
GIM27401T
I/O ERROR - jobname, stepname, address, device, lib, action, description, access_method, optional_PDSE_data I/O ERROR - jobname, stepname, address, device, lib, action, description, rbn, access_method, optional_PDSE_data I/O ERROR - jobname, stepname, address, device, lib, action, description, track_address, block_number, access_method, optional_PDSE_data
GIM27501I
YOU MAY WANT TO REJECT FUNCTION fmid BECAUSE IT NO LONGER APPLIES TO THE GLOBAL ZONE.
GIM27601E
operand1 AND operand2 ARE MUTUALLY EXCLUSIVE OPERANDS.
GIM27601S
operand1 AND operand2 ARE MUTUALLY EXCLUSIVE OPERANDS.
GIM27601T
operand1 AND operand2 ARE MUTUALLY EXCLUSIVE OPERANDS.
GIM27602E
A SPECIFIED OPERAND IS NOT ALLOWED FOR THE dataset DATA SET.
GIM27605S
variable IS NOT A VALID SUBSTITUTION VARIABLE WITHIN A FIREWALL COMMAND.
GIM27650S
keyword1 AND keyword2 ARE MUTUALLY EXCLUSIVE.
GIM27701W
enttype ENTRY entname DOES NOT EXIST. THE REPLACE OPERATION HAS BEEN CHANGED TO AN ADD.
GIM27801S
THE EXCLUDEZONE OPERAND SPECIFIED ALL THE ZONES IN THE ZONEINDEX SUBENTRIES. NO ZONES ARE LEFT TO CHECK.
GIM27901S
A VSAM ERROR OCCURRED DURING AN ATTEMPT TO ACCESS AN SMPCSI DATA SET – VPLFUNCT = vplfunct.
GIM28002I
SMPTLIB smptlib WAS NOT DELETED BECAUSE VOLUME INFORMATION WAS NOT SPECIFIED.
GIM28101E
SYSMOD sysmod CONTAINS MORE THAN ONE MCS FOR ELEMENT elmname. ONLY ONE IS ALLOWED.
GIM28201S
ZONE zonename WAS NOT PROCESSED BECAUSE IT IS A zonetype ZONE AND operand WAS SPECIFIED.
GIM28301E
ALLOCATION FAILED FOR dataset, WHICH IS REQUIRED IN ORDER TO PROCESS LOAD MODULE loadmod. THE SYSMOD IS sysmod.
GIM28302W
ALLOCATION FAILED FOR dataset, WHICH IS REQUIRED FOR COMPRESS PROCESSING.
GIM28303E
ALLOCATION FAILED FOR dataset, WHICH IS REQUIRED IN ORDER TO PROCESS SYSMOD sysmod.
GIM28304I
ALLOCATION FAILED FOR SMPLOGA.
GIM28305T
THE SMPCSI DD STATEMENT IS MISSING.
GIM28306I
ALLOCATION FAILED FOR dataset.
GIM28306W
ALLOCATION FAILED FOR dataset.
GIM28306E
ALLOCATION FAILED FOR dataset.
GIM28306S
ALLOCATION FAILED FOR dataset.
GIM28306T
ALLOCATION FAILED FOR dataset.
GIM28307E
ALLOCATION FAILED FOR dataset, WHICH IS REQUIRED IN ORDER TO PROCESS ELEMENT element IN SYSMOD sysmod.
GIM28308E
ALLOCATION FAILED FOR smptload WHICH IS REQUIRED IN ORDER TO PROCESS elmtype ELEMENT elmname IN SYSMOD sysmod.
GIM28309I
ALLOCATION FAILED FOR ddname WHICH WAS MODELED AFTER modeldd. ddname IS NEEDED IN ORDER TO PROCESS elmtype ELEMENT elmname IN SYSMOD sysmod.
GIM28310I
INFORMATION RETRIEVAL FAILED FOR ddname. INFORMATION ABOUT LIBRARY ddname IS NEEDED BEFORE SMP/E CAN INSTALL elmtype ELEMENT elmname FROM SYSMOD sysmod INTO ddname.
GIM28311E
ALLOCATION FAILED FOR ddname WHICH WAS MODELED AFTER modeldd. THE REASON CODE WAS rsncode. ddname IS NEEDED TO PROCESS elmtype ELEMENT elmname IN SYSMOD sysmod.
GIM28401E
THE LOAD MODULE ON THE ZAP NAME STATEMENT FOR MODULE modname IN SYSMOD sysmod IS NOT AN LMOD SUBENTRY IN THE MOD ENTRY FOR modname.
GIM28501W
COMPRESS PROCESSING FAILED FOR THE library LIBRARY BECAUSE IT IS AN UNMOVABLE DATA SET.
GIM28600W
LMOD loadmod CONTAINS MODULES NOT OWNED BY FMID fmid. THESE MODULES ARE NOT INCLUDED IN FUNCTION fmid, BUT WILL BE IDENTIFIED IN THE JCLIN FOR LMOD loadmod.
GIM28701S
THE COMMAND WAS NOT PROCESSED BECAUSE A RETURN CODE SPECIFIED ON THE RC OPERAND WAS EXCEEDED.
GIM28801I
TARGET ZONE zonename WAS NOT UPDATED BECAUSE JCLIN PROCESSING FAILED.
GIM28900I
THE EXISTING LOAD MODULE loadmod IN SYSLIB ddname1 IS BEING INCLUDED DURING THE LINK-EDIT OF loadmod IN SYSLIB ddname2 BECAUSE THE LOAD MODULE CONTAINS CROSS-ZONE MODULES.
GIM29000W
SYSMOD sysmod1 IS action IN ERROR, BUT WILL BE SUPERSEDED BY FUNCTION sysmod2.
GIM29100E
SYSMOD sysmod IS NOT A FUNCTION. SYSMODS SPECIFIED ON THE FORFMID OPERAND MUST BE FUNCTIONS.
GIM29201E
THE MEMBER NAME ON THE UPDATE CONTROL STATEMENT DOES NOT MATCH THE MEMBER NAME ON THE ELEMENT UPDATE MCS.
GIM29300E
SYSMOD sysmod WAS NOT PROCESSED BECAUSE sysmod IS NOT DEFINED IN ZONE zonename.
GIM29400E
SYSMOD sysmod1 WAS NOT PROCESSED BECAUSE sysmod1 WAS DELETED BY sysmod2.
GIM29500E
SYSMOD sysmod1 WAS NOT PROCESSED BECAUSE sysmod1 WAS SUPERSEDED BY sysmod2.
GIM29600E
SYSMOD sysmod WAS NOT PROCESSED BECAUSE sysmod WAS IN ERROR.
GIM29700E
SYSMOD sysmod CONTAINS ELEMENTS OR JCLIN USING THE RELFILE AND FROMDS OPERANDS. ONLY ONE OF THESE OPERANDS IS ALLOWED IN THE SAME SYSMOD.
GIM29800E
CURRENT PATH NAME WAS NOT CHANGED BECAUSE THE NEW NAME EXCEEDS THE 255-CHARACTER MAXIMUM.
GIM29900S
THE PATH TO_VALUE MUST END WITH A SLASH ("/").
GIM30000E
AN UNKNOWN COMMAND NAME WAS PASSED TO GIMAPI.
GIM30100E
THE CSI PARAMETER OF THE QUERY COMMAND SPECIFIES A DATA SET NAME THAT EXCEEDS 44 CHARACTERS.
GIM30201E
command PROCESSING FAILED FOR SYSMOD sysmod. ALL SYSMODS THAT WOULD HAVE DELETED sysmod HAVE FAILED.
GIM30202E
command PROCESSING FAILED FOR SYSMOD sysmod. ALL SYSMODS THAT WOULD HAVE SUPERSEDED sysmod HAVE FAILED.
GIM30203I
command PROCESSING FAILED FOR SYSMOD sysmod. PROCESSING FOR AN ELEMENT DELETED BY sysmod FAILED.
GIM30204E
command PROCESSING FAILED FOR SYSMOD sysmod. REQUIRED SYSMODS WERE EXCLUDED.
GIM30206E
command PROCESSING FAILED FOR SYSMOD sysmod. HOLD REASON IDS WERE NOT RESOLVED.
GIM30208I
command PROCESSING FAILED FOR SYSMOD sysmod. JCLIN PROCESSING FAILED.
GIM30209E
command PROCESSING FAILED FOR SYSMOD sysmod. REQUIRED SYSMODS FAILED OR WERE MISSING.
GIM30211E
RESTORE PROCESSING FAILED FOR SYSMOD sysmod BECAUSE IT IS A CROSS-ZONE REQUISITE FOR OTHER SYSMODS.
GIM30213E
command PROCESSING FAILED FOR SYSMOD sysmod1. SYSMOD sysmod2, WHICH IS SUPERSEDED BY SYSMOD sysmod1, MUST ALSO BE SPECIFIED ON THE RESTORE COMMAND.
GIM30214I
command PROCESSING FAILED FOR SYSMOD sysmod. AN ERROR OCCURRED WHEN SMP/E TRIED TO UPDATE THE SMPCSI DATA SET.
GIM30215I
command PROCESSING FAILED FOR SYSMOD sysmod. A SYSTEM ABEND OCCURRED.
GIM30216I
command PROCESSING FAILED FOR SYSMOD sysmod. SYSTEM UTILITY PROCESSING FAILED FOR AN ELEMENT IN sysmod.
GIM30217I
command PROCESSING FAILED FOR SYSMOD sysmod. RETRANSFORMATION PROCESSING FAILED FOR AN ELEMENT IN sysmod.
GIM30218E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING IS INCOMPLETE FOR SYSMOD sysmod2, WHICH WAS SPECIFIED ON THE ++VER PRE OPERAND.
GIM30219E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING FAILED FOR SYSMOD sysmod2, WHICH WAS SPECIFIED ON THE ++VER PRE OPERAND.
GIM30220E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING IS INCOMPLETE FOR SYSMOD sysmod2, WHICH WAS SPECIFIED ON THE ++VER REQ OPERAND.
GIM30221E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING FAILED FOR SYSMOD sysmod2, WHICH WAS SPECIFIED ON THE ++VER REQ OPERAND.
GIM30222E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING IS INCOMPLETE FOR SYSMOD sysmod2, WHICH WAS SPECIFIED ON THE ++IF REQ OPERAND.
GIM30223E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING FAILED FOR SYSMOD sysmod2, WHICH WAS SPECIFIED ON THE ++IF REQ OPERAND.
GIM30224E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING IS INCOMPLETE FOR SYSMOD sysmod2, WHICH WAS SPECIFIED ON THE ++VER FMID OPERAND.
GIM30225E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING FAILED FOR SYSMOD sysmod2, WHICH WAS SPECIFIED ON THE ++VER FMID OPERAND.
GIM30226E
command PROCESSING FAILED FOR SYSMOD sysmod1 BECAUSE PROCESSING IS INCOMPLETE FOR SYSMOD sysmod2. SYSMOD sysmod2 CONTAINS HIGHER LEVELS OF COMMON ELEMENTS.
GIM30227E
command PROCESSING FAILED FOR SYSMOD sysmod1 BECAUSE PROCESSING FAILED FOR SYSMOD sysmod2. SYSMOD sysmod2 CONTAINS HIGHER LEVELS OF COMMON ELEMENTS.
GIM30228E
command PROCESSING FAILED FOR SYSMOD sysmod1 BECAUSE PROCESSING IS INCOMPLETE FOR SYSMOD sysmod2. THESE SYSMODS CONTAIN COMMON ELEMENTS.
GIM30229E
command PROCESSING FAILED FOR SYSMOD sysmod1 BECAUSE PROCESSING FAILED FOR SYSMOD sysmod2. THESE SYSMODS CONTAIN COMMON ELEMENTS.
GIM30230E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING FAILED FOR CROSS-ZONE REQUISITE SYSMOD sysmod2, WHICH WAS CAUSED BY SYSMOD sysmod3 IN ZONE zonename.
GIM30231E
command PROCESSING FAILED FOR SYSMOD sysmod1. PROCESSING IS INCOMPLETE FOR CROSS-ZONE REQUISITE SYSMOD sysmod2, WHICH WAS CAUSED BY SYSMOD sysmod3 IN ZONE zonename.
GIM30232E
RESTORE PROCESSING FAILED FOR SYSMOD sysmod1 BECAUSE SYSMOD sysmod2 REQUIRES SYSMOD sysmod1. sysmod1 COULD NOT BE RESTORED BECAUSE sysmod2. FAILED.
GIM30233E
RESTORE PROCESSING FAILED FOR SYSMOD sysmod1 BECAUSE SYSMOD sysmod2 REQUIRES SYSMOD sysmod1. sysmod1 COULD NOT BE RESTORED BECAUSE sysmod2 IS INCOMPLETE.
GIM30234E
command PROCESSING FAILED FOR SYSMOD sysmod1. SYSMOD sysmod2 CONTAINS A SHELL SCRIPT NEEDED TO PROCESS AN ELEMENT IN SYSMOD sysmod1, BUT PROCESSING IS INCOMPLETE FOR SYSMOD sysmod2.
GIM30235E
command PROCESSING FAILED FOR SYSMOD sysmod1. SYSMOD sysmod2 CONTAINS A SHELL SCRIPT NEEDED TO PROCESS AN ELEMENT IN SYSMOD sysmod1, BUT PROCESSING FAILED FOR SYSMOD sysmod2.
GIM30236I
command PROCESSING FAILED FOR SYSMOD sysmod. SHELL SCRIPT PROCESSING FAILED FOR AN ELEMENT IN SYSMOD sysmod.
GIM30237S
THE RETRIEVAL OF DATA FROM FILE filename FAILED. THE DATA IN THE FILE APPEARS TO BE CORRUPTED OR INCOMPLETE.
GIM30301T
COMPRESS PROCESSING FAILED FOR THE library LIBRARY. THE RETURN CODE WAS rtncode.
GIM30302I
COMPRESS PROCESSING WAS SUCCESSFUL FOR THE library LIBRARY. THE RETURN CODE WAS rtncode.
GIM30302W
COMPRESS PROCESSING WAS SUCCESSFUL FOR THE library LIBRARY. THE RETURN CODE WAS rtncode.
GIM30400S
THE ddname DDNAME IS IN USE BY DATA SET dataset. THE CSI DATA SET SPECIFIED COULD NOT BE ALLOCATED.
GIM30500E
LINK PROCESSING FAILED FOR LMOD loadmod IN SYSLIB syslib. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno - SYSPRINT FILE sysprint.
GIM30600E
THERE IS A SYNTAX ERROR IN THE parameter PARAMETER IN CHARACTER POSITION position.
GIM30700S
GIMAPI COULD NOT OBTAIN ENOUGH STORAGE TO PROCESS THE command COMMAND.
GIM30800E
NO VALUE WAS SPECIFIED FOR THE parameter PARAMETER OF THE command COMMAND.
GIM30900E
AN ASTERISK CANNOT BE USED WITH ANY OTHER VALUES ON THE parameter PARAMETER.
GIM31000E
AN UNDEFINED ENTRY TYPE OF enttype WAS SPECIFIED ON THE ENTRY PARAMETER.
GIM31100W
THE VALUE value HAS BEEN SPECIFIED MORE THAN ONCE ON THE parameter PARAMETER. ALL BUT THE FIRST OCCURRENCE IS IGNORED.
GIM31200E
AN UNDEFINED SUBENTRY TYPE OF subtype WAS SPECIFIED ON THE parameter PARAMETER.
GIM31300E
COMPARISON OPERATOR oper CANNOT BE USED WITH SUBENTRY TYPE subtype. ONLY TIME, DATE, AND RETURN CODE SUBENTRIES CAN BE COMPARED WITH THE >, >=, < OR <= OPERATORS.
GIM31400E
SUBENTRY TYPE subtype CANNOT BE USED ON THE FILTER PARAMETER.
GIM31500E
THE DATE VALUE IN COLUMN colnum DID NOT USE THE FORMAT YYDDD.
GIM31600E
THE TIME VALUE IN COLUMN colnum DID NOT USE THE FORMAT 'HH:MM:SS'.
GIM31700E
A CLOSING QUOTE IS MISSING FROM A FILTER VALUE.
GIM31800E
A LEFT PARENTHESIS WAS NOT CLOSED WITH A CORRESPONDING RIGHT PARENTHESIS.
GIM31900E
THE RETURN CODE VALUE IN COLUMN colnum IS NOT A NUMERIC VALUE OF NO MORE THAN TWO CHARACTERS IN LENGTH.
GIM31901I
SYSMOD sysmod1 DOES NOT SPECIFY sysmod2 ON THE PRE OR SUP OPERAND. sysmod2 IS THE RMID FOR elmtype elmname THAT IS CURRENTLY INSTALLED.
GIM31902I
SYSMOD sysmod1 DOES NOT SPECIFY sysmod2 ON THE PRE OR SUP OPERAND. sysmod2 IS A UMID FOR elmtype elmname THAT IS CURRENTLY INSTALLED.
GIM31903I
SYSMOD sysmod1 DOES NOT SPECIFY sysmod2 ON THE PRE OR SUP OPERAND. sysmod2 IS THE RMID FOR elmtype elmname THAT IS BEING INSTALLED.
GIM31904I
SYSMOD sysmod1 DOES NOT SPECIFY sysmod2 ON THE PRE OR SUP OPERAND. sysmod2 IS A UMID FOR elmtype elmname THAT IS BEING INSTALLED.
GIM32000W
NO ENTRIES MATCHING THE SPECIFIED CRITERIA WERE FOUND.
GIM32100S
modtype MODULE modname COULD NOT BE LOADED. SMP/E API PROCESSING IS STOPPED. ABEND CODE: abncode REASON CODE: rsncode
GIM32200I
LINK PROCESSING WAS SUCCESSFUL FOR LMOD loadmod IN SYSLIB syslib. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno - SYSPRINT FILE sysprint.
GIM32200W
LINK PROCESSING WAS SUCCESSFUL FOR LMOD loadmod IN SYSLIB syslib. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno - SYSPRINT FILE sysprint.
GIM32300I
command PROCESSING FAILED FOR SYSMOD sysmod. UPDATE PROCESSING FAILED FOR AN ELEMENT IN sysmod.
GIM32401W
SYSMOD sysmod1 REGRESSES elmtype elmname, WHICH WAS PREVIOUSLY REPLACED BY SYSMOD sysmod2.
GIM32402W
SYSMOD sysmod1 REGRESSES elmtype elmname, WHICH WAS PREVIOUSLY UPDATED BY SYSMOD sysmod2.
GIM32501E
command PROCESSING HAS FAILED FOR SYSMOD sysmod1. SYSMOD sysmod1 SUPERSEDES SYSMOD sysmod2 BUT DOES NOT CONTAIN elmtype elmname.
GIM32501W
SYSMOD sysmod1 SUPERSEDES SYSMOD sysmod2 BUT DOES NOT CONTAIN ELEMENT elmname.
GIM32600E
DDDEF ENTRY dddef IS NEEDED FOR PROCESSING FMID fmid BUT IS NOT IN ZONE zonename. THEREFORE DDNAME dddef IS USED AS THE DATA SET NAME ON THE FROMDS OPERAND.
GIM32601W
elmtype elmid IS NOT PART OF SYSMOD sysmod1. THE FMID FOR elmtype elmid IS SYSMOD sysmod2.
GIM32701E
INLINE DATA IS NOT ALLOWED AFTER AN MCS IF THE DELETE, FROMDS, LKLIB, RELFILE, OR TXLIB OPERAND IS SPECIFIED.
GIM32800W
SIDE DECK oldname WAS RENAMED TO newname IN THE library LIBRARY BY SYSMOD sysmod. THE CONTENTS OF THIS SIDE DECK MAY NOT BE ACCURATE BECAUSE THE ASSOCIATED LOAD MODULE HAS ALSO BEEN RENAMED.
GIM32900W
NO ZONES MATCHING THE SPECIFIED CRITERIA WERE FOUND.
GIM33000W
SIDE DECK LIBRARY oldsdlib FOR LOAD MODULE loadmod HAS BEEN REPLACED BY LIBRARY newsdlib DURING JCLIN PROCESSING. THE SIDE DECK MEMBER IN LIBRARY oldsdlib WILL NOT BE DELETED.
GIM33001W
SYSTEM LIBRARY oldsdlib FOR LOAD MODULE loadmod HAS BEEN REPLACED BY LIBRARY newsdlib DURING JCLIN PROCESSING. THE LOAD MODULE MEMBER IN LIBRARY oldsdlib WILL NOT BE DELETED.
GIM33100E
AN EXTRANEOUS RIGHT PARENTHESIS WAS ENCOUNTERED ON THE FILTER PARAMETER.
GIM33200E
elmtype elmname COULD NOT BE RETRANSFORMED BECAUSE THE attribute OF value FOR THE DATA IS NOT SUPPORTED BY THIS LEVEL OF SMP/E.
GIM33201E
elmtype elmname COULD NOT BE RETRANSFORMED BECAUSE THE RECFM FOR LIBRARY library IS NOT SUPPORTED.
GIM33300E
command PROCESSING FAILED FOR SYSMOD sysmod. THE SYSMOD CONTAINS COMPACTED DATA BUT THE CURRENT LEVEL OF THE OPERATING SYSTEM DOES NOT SUPPORT COMPRESSION OR EXPANSION SERVICES. MVS/ESA SP 4.3 OR HIGHER IS REQUIRED.
GIM33301E
command PROCESSING FAILED FOR SYSMOD sysmod. elmtype elmname WITHIN SYSMOD sysmod COULD NOT BE EXPANDED BECAUSE THE COMPACTED DATA IS CORRUPTED OR INCOMPLETE.
GIM33302E
command PROCESSING FAILED FOR SYSMOD sysmod. elmtype elmname WITHIN SYSMOD sysmod COULD NOT BE EXPANDED BECAUSE THE dictionary DICTIONARY USED TO COMPACT THE DATA IS NOT SUPPORTED.
GIM33400S
GIMCPTS PROCESSING FAILED BECAUSE COMPRESSION AND EXPANSION SERVICES ARE NOT SUPPORTED BY THE CURRENT LEVEL OF THE OPERATING SYSTEM. MVS/ESA SP 4.3 OR HIGHER IS REQUIRED.
GIM33500S
GIMCPTS PROCESSING FAILED BECAUSE THE DATA SET ORGANIZATION OF SYSUT2 DOES NOT MATCH THE dsorg ORGANIZATION OF SYSUT1.
GIM33501S
GIMCPTS PROCESSING FAILED BECAUSE THE SYSUT2 DATA SET MUST BE DIFFERENT THAN THE SYSUT1 DATA SET.
GIM33502S
GIMCPTS PROCESSING FAILED. THE dataset DATA SET COULD NOT BE USED BECAUSE THE attribute IS NOT value.
GIM33503S
progname PROCESSING FAILED. THE dataset DATA SET COULD NOT BE USED BECAUSE THE DATA SET ORGANIZATION IS NOT SEQUENTIAL OR PARTITIONED.
GIM33504S
GIMZIP PROCESSING FAILED. infile COULD NOT BE USED BECAUSE IT IS NOT A SEQUENTIAL DATA SET, A PARTITIONED DATA SET, A VSAM DATA SET OR A FILE OR DIRECTORY IN THE UNIX FILE SYSTEM.
GIM33505S
GIMZIP PROCESSING FAILED. infile COULD NOT BE USED BECAUSE IT DOES NOT EXIST.
GIM33506S
GIMUNZIP PROCESSING FAILED. ARCHIVE archive COULD NOT BE EXTRACTED INTO name BECAUSE THE ARCHIVE CONTENTS (type1) AND THE DESTINATION (type2) ARE INCOMPATIBLE.
GIM33507S
GIMZIP PROCESSING FAILED. VSAM DATA SET dataset COULD NOT BE PROCESSED BECAUSE IT IS NOT AN ESDS, KSDS, LDS, OR RRDS.
GIM33600S
progname PROCESSING FAILED BECAUSE THE dataset DATA SET IS MISSING.
GIM33601S
SMP/E WAS UNABLE TO OBTAIN THE SIZE OF name.
GIM33700I
zonetype ZONE zonename WILL BE USED FOR RECEIVE APPLYCHECK OR ACCEPTCHECK COMMAND PROCESSING.
GIM33801E
THE ++mcstype MCS IS NOT ALLOWED IN FUNCTION SYSMODS.
GIM33901E
THE operand OPERAND IS ONLY ALLOWED IN FUNCTION SYSMODS.
GIM34001E
THE RELFILE OPERAND IS NOT ALLOWED BECAUSE THE FILES OPERAND WAS NOT SPECIFIED ON THE HEADER MCS.
GIM34100W
THE GLOBAL ZONE WAS SPECIFIED FOR RECEIVE APPLYCHECK OR ACCEPTCHECK PROCESSING. IT IS NOT VALID AND IS IGNORED.
GIM34201E
MORE THAN ONE ++JCLIN STATEMENT WAS SPECIFIED IN A SYSMOD. ONLY ONE IS ALLOWED.
GIM34202E
MORE THAN ONE operand OPERAND WAS SPECIFIED ON AN MCS. ONLY ONE IS ALLOWED.
GIM34203W
THE SYMPATH OPERAND SPECIFIES number MORE VALUES THAN THE SYMLINK OPERAND ON THE ++mcstype MCS FOR elmname IN SYSMOD sysmod.
GIM34301T
SMPPTFIN MUST BE A STANDARD LABEL TAPE BECAUSE THE SYSMOD BEING RECEIVED CONTAINS RELFILES.
GIM34400S
THE operand OPERAND WAS FOUND ON THE command COMMAND. THIS RELEASE OF SMP/E DOES NOT SUPPORT THE operand OPERAND. OS/390 RELEASE 5 OR HIGHER IS NEEDED.
GIM34401I
THE operand OPERAND CONTAINS A VALUE THAT CANNOT BE PROCESSED BY THE CURRENT RELEASE OF SMP/E. SMP/E VERSION ver RELEASE rel (OR HIGHER) IS REQUIRED.
GIM34401S
THE operand OPERAND CONTAINS A VALUE THAT CANNOT BE PROCESSED BY THE CURRENT RELEASE OF SMP/E. SMP/E VERSION ver RELEASE rel (OR HIGHER) IS REQUIRED.
GIM34500W
THE ACTIVE OPTIONS ENTRY entname CONTAINS A subname SUBENTRY. THIS RELEASE OF SMP/E DOES NOT SUPPORT APPLYCHECK OR ACCEPTCHECK PROCESSING DURING THE RECEIVE COMMAND. OS/390 RELEASE 5 OR HIGHER IS NEEDED.
GIM34601E
THE ONLY UPDATE CONTROL STATEMENTS ALLOWED ARE ./ CHANGE AND ./ ENDUP.
GIM34701E
SMP/E EXPECTED TO FIND AN MCS. IT FOUND INLINE DATA INSTEAD.
GIM34801E
RECEIVE PROCESSING FAILED FOR THE SYSMOD BECAUSE IT CONTAINS MORE THAN ONE ++VER MCS FOR THE SAME SREL-FMID PAIR. ONLY ONE IS ALLOWED.
GIM34901E
THE ++IF MCS MUST IMMEDIATELY FOLLOW A ++VER MCS.
GIM35001S
THE RELFILE VALUE SPECIFIED ON AN MCS STATEMENT IS GREATER THAN THE NUMBER OF FILES IN THE SYSMOD. THIS IS NOT ALLOWED.
GIM35101E
SYSMOD sysmod FAILED BECAUSE OF AN ERROR THAT OCCURRED WHILE LOADING SMPTLIB DATA SETS. THE RETURN CODE FROM THE COPY UTILITY WAS rtncode.
GIM35201I
SMPTLIB smptlib WAS ALLOCATED AND CATALOGED ON VOLUME volser.
GIM35202I
SMP/E USED SMPTLIB smptlib, WHICH ALREADY EXISTS ON VOLUME volser.
GIM35301E
SMPTLIB smptlib WAS NOT ALLOCATED ON VOLUME volser BECAUSE IT IS NOT A PARTITIONED DATA SET.
GIM35302E
SMPTLIB smptlib WAS NOT ALLOCATED ON VOLUME volser BECAUSE ERROR CODE errcode WAS ISSUED BY DYNAMIC ALLOCATION.
GIM35305S
SMPTLIB smptlib WAS NOT ALLOCATED BECAUSE IT IS DEFINED AS A DUMMY DATA SET.
GIM35306E
SMPTLIB smptlib WAS NOT ALLOCATED BECAUSE ERROR CODE errcode WAS ISSUED BY DYNAMIC ALLOCATION.
GIM35307E
SMPTLIB smptlib FOR sysmod WAS NOT ALLOCATED TO ddname BECAUSE THE DATA SET WAS NOT FOUND.
GIM35401I
SMPTLIB smptlib WAS DELETED AND UNCATALOGED FROM VOLUME volser.
GIM35501E
AN ERROR OCCURRED DURING PROCESSING OF THE enttype ENTRY FOR SYSMOD sysmod IN THE library LIBRARY.
GIM35601E
subtype SUBENTRY subname WAS NOT ADDED BECAUSE IT ALREADY EXISTS.
GIM35602E
subtype SUBENTRY subname1 WAS NOT ADDED BECAUSE subname2 ALREADY EXISTS.
GIM35603E
THE INITIAL DISPOSITION SUBENTRY WAS NOT ADDED BECAUSE IT ALREADY EXISTS.
GIM35604E
THE FINAL DISPOSITION SUBENTRY WAS NOT ADDED BECAUSE IT ALREADY EXISTS.
GIM35701E
subtype SUBENTRY subname WAS NOT DELETED BECAUSE IT DOES NOT EXIST.
GIM35702E
subtype SUBENTRY subname WAS NOT ADDED BECAUSE IT IS THE SAME AS THE enttype ENTRY THAT WOULD CONTAIN IT.
GIM35703E
THE INITIAL DISPOSITION SUBENTRY value WAS NOT DELETED BECAUSE IT DOES NOT EXIST.
GIM35704E
THE FINAL DISPOSITION SUBENTRY value WAS NOT DELETED BECAUSE IT DOES NOT EXIST.
GIM35705E
DELETING THE SPECIFIED SUBENTRIES FROM THE listname SUBENTRY LIST WOULD STILL LEAVE SUBENTRIES IN THE LIST. THIS IS NOT ALLOWED.
GIM35801W
subtype SUBENTRY subname DOES NOT EXIST. THE REPLACE OPERATION HAS BEEN CHANGED TO AN ADD.
GIM35901I
ERROR HOLD reasonid WAS NOT RESOLVED.
GIM35902I
SYSTEM HOLD reasonid WAS NOT RESOLVED.
GIM35903I
USER HOLD reasonid WAS NOT RESOLVED.
GIM35904I
PREREQUISITE SYSMOD sysmod WAS MISSING.
GIM35905I
PREREQUISITE SYSMOD sysmod WAS EXCLUDED.
GIM35906I
PREREQUISITE SYSMOD sysmod WAS HELD.
GIM35907I
PREREQUISITE SYSMOD sysmod FAILED.
GIM35908I
COREQUISITE SYSMOD sysmod WAS MISSING.
GIM35909I
COREQUISITE SYSMOD sysmod WAS EXCLUDED.
GIM35910I
COREQUISITE SYSMOD sysmod WAS HELD.
GIM35911I
COREQUISITE SYSMOD sysmod FAILED.
GIM35912I
CONDITIONAL REQUISITE SYSMOD sysmod WAS MISSING.
GIM35913I
CONDITIONAL REQUISITE SYSMOD sysmod WAS EXCLUDED.
GIM35914I
CONDITIONAL REQUISITE SYSMOD sysmod WAS HELD.
GIM35915I
CONDITIONAL REQUISITE SYSMOD sysmod FAILED.
GIM35916I
CONDITIONAL REQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 CONTAINED THE ++IF STATEMENT.
GIM35917I
CONDITIONAL REQUISITE SYSMOD sysmod1 WAS EXCLUDED. SYSMOD sysmod2 CONTAINED THE ++IF STATEMENT.
GIM35918I
CONDITIONAL REQUISITE SYSMOD sysmod1 WAS HELD. SYSMOD sysmod2 CONTAINED THE ++IF STATEMENT.
GIM35919I
CONDITIONAL REQUISITE SYSMOD sysmod1 FAILED. SYSMOD sysmod2 CONTAINED THE ++IF STATEMENT.
GIM35920I
SYSMOD sysmod, WHICH SUPERSEDES THE INDICATED SYSMOD, FAILED.
GIM35921I
CROSS-ZONE REQUISITE SYSMOD sysmod REQUIRED IN ZONE zonename WAS BYPASSED.
GIM35922I
SYSMOD sysmod, WHICH SPECIFIES THE INDICATED SYSMOD AS A PREREQUISITE, FAILED.
GIM35923I
SYSMOD sysmod1 IN ZONE zonename REQUIRES SYSMOD sysmod2.
GIM35924I
SYSMOD sysmod, WHICH SPECIFIES THE INDICATED SYSMOD AS A COREQUISITE, FAILED.
GIM35925I
CROSS-ZONE REQUISITE SYSMOD sysmod REQUIRED IN ZONE zonename WAS MISSING.
GIM35926I
SYSMOD sysmod, WHICH SPECIFIES THE INDICATED SYSMOD AS A CONDITIONAL REQUISITE, FAILED.
GIM35927I
SYSMOD sysmod, WHICH SPECIFIES THE INDICATED SYSMOD AS AN FMID, FAILED.
GIM35928I
SYSMOD sysmod, WHICH IS AN FMID FOR THE INDICATED SYSMOD, FAILED.
GIM35929I
CROSS-ZONE REQUISITE SYSMOD sysmod1 CAUSED BY SYSMOD sysmod2 IN ZONE zonename WAS BYPASSED.
GIM35930I
PREREQUISITE SYSMOD sysmod WAS BYPASSED.
GIM35931I
COREQUISITE SYSMOD sysmod WAS BYPASSED.
GIM35932I
CONDITIONAL REQUISITE SYSMOD sysmod WAS BYPASSED.
GIM35933I
CONDITIONAL REQUISITE SYSMOD sysmod1 WAS BYPASSED. SYSMOD sysmod2 CONTAINED THE ++IF STATEMENT.
GIM35934I
ERROR HOLD reasonid WAS BYPASSED.
GIM35935I
SYSTEM HOLD reasonid WAS BYPASSED.
GIM35936I
USER HOLD reasonid WAS BYPASSED.
GIM35937I
ERROR HOLD reasonid WAS BYPASSED BECAUSE CLASS class WAS BYPASSED.
GIM35938I
SYSTEM HOLD reasonid WAS BYPASSED BECAUSE CLASS class WAS BYPASSED.
GIM35939I
USER HOLD reasonid WAS BYPASSED BECAUSE CLASS class WAS BYPASSED.
GIM35940I
SYSMOD sysmod1, WHICH WOULD HAVE RESOLVED HOLD holdid FOR SYSMOD sysmod2, FAILED.
GIM35941I
SYSMOD sysmod1, WHICH WOULD HAVE DELETED SYSMOD sysmod2, FAILED.
GIM35942I
SYSMOD sysmod1, WHICH WOULD HAVE SUPERSEDED SYSMOD sysmod2, FAILED.
GIM35943I
SYSMOD sysmod, WHICH SUPERSEDES THE INDICATED SYSMOD, WAS MISSING.
GIM35944I
SYSMOD sysmod, WHICH SPECIFIES THE INDICATED SYSMOD AS A PREREQUISITE, WAS MISSING.
GIM35945I
SYSMOD sysmod, WHICH SPECIFIES THE INDICATED SYSMOD AS A COREQUISITE, WAS MISSING.
GIM35946I
SYSMOD sysmod, WHICH SPECIFIES THE INDICATED SYSMOD AS A CONDITIONAL REQUISITE, WAS MISSING.
GIM35947I
SYSMOD sysmod, WHICH SPECIFIES THE INDICATED SYSMOD AS AN FMID, WAS MISSING.
GIM35948I
SYSMOD sysmod, WHICH IS AN FMID FOR THE INDICATED SYSMOD, WAS MISSING.
GIM35949I
ERROR HOLD reasonid WAS NOT RESOLVED. SYSMOD sysmod WOULD HAVE SUPERSEDED reasonid, BUT HAS FAILED.
GIM35950I
ERROR HOLD reasonid WAS NOT RESOLVED. SYSMOD sysmod WOULD HAVE SUPERSEDED reasonid, BUT WAS EXCLUDED.
GIM35951I
PREREQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 WOULD HAVE SUPERSEDED sysmod1, BUT HAS FAILED.
GIM35952I
PREREQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 WOULD HAVE SUPERSEDED sysmod1, BUT WAS EXCLUDED.
GIM35953I
COREQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 WOULD HAVE SUPERSEDED sysmod1, BUT HAS FAILED.
GIM35954I
COREQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 WOULD HAVE SUPERSEDED sysmod1, BUT WAS EXCLUDED.
GIM35955I
CONDITIONAL REQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 WOULD HAVE SUPERSEDED sysmod1, BUT HAS FAILED.
GIM35956I
CONDITIONAL REQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 WOULD HAVE SUPERSEDED sysmod1, BUT WAS EXCLUDED.
GIM35957I
CONDITIONAL REQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 WOULD HAVE SUPERSEDED sysmod1, BUT HAS FAILED. SYSMOD sysmod3 CONTAINED THE ++IF STATEMENT.
GIM35958I
CONDITIONAL REQUISITE SYSMOD sysmod1 WAS MISSING. SYSMOD sysmod2 WOULD HAVE SUPERSEDED sysmod1, BUT WAS EXCLUDED. SYSMOD sysmod3 CONTAINED THE ++IF STATEMENT.
GIM35959I
CROSS-ZONE REQUISITE SYSMOD sysmod1 CAUSED BY SYSMOD sysmod2 IN ZONE zonename WAS MISSING.
GIM35960I
CROSS-ZONE REQUISITE SYSMOD sysmod1 CAUSED BY SYSMOD sysmod2 IN ZONE zonename WAS EXCLUDED.
GIM35961I
CROSS-ZONE REQUISITE SYSMOD sysmod1 CAUSED BY SYSMOD sysmod2 IN ZONE zonename WAS HELD.
GIM35962I
CROSS-ZONE REQUISITE SYSMOD sysmod1 CAUSED BY SYSMOD sysmod2 IN ZONE zonename FAILED.
GIM35963I
CROSS-ZONE REQUISITE SYSMOD sysmod1 CAUSED BY SYSMOD sysmod2 IN ZONE zonename WAS MISSING. SYSMOD sysmod3 WOULD HAVE SUPERSEDED sysmod1, BUT HAS FAILED.
GIM35964I
CROSS-ZONE REQUISITE SYSMOD sysmod1 CAUSED BY SYSMOD sysmod2 IN ZONE zonename WAS MISSING. SYSMOD sysmod3 WOULD HAVE SUPERSEDED sysmod1, BUT WAS EXCLUDED.
GIM35965I
SYSTEM HOLD reasonid ORIGINATED BY SYSMOD sysmod WAS NOT RESOLVED.
GIM35966I
SYSTEM HOLD reasonid ORIGINATED BY SYSMOD sysmod WAS BYPASSED.
GIM35967I
PREREQUISITE SYSMOD sysmod IS BEING DELETED.
GIM35968I
COREQUISITE SYSMOD sysmod IS BEING DELETED.
GIM35969I
CONDITIONAL REQUISITE SYSMOD sysmod IS BEING DELETED.
GIM35970I
CONDITIONAL REQUISITE SYSMOD sysmod1 IS BEING DELETED. SYSMOD sysmod2 CONTAINED THE ++IF STATEMENT.
GIM35971I
CROSS-ZONE REQUISITE SYSMOD sysmod1 CAUSED BY SYSMOD sysmod2 IN ZONE zonename IS BEING DELETED.
GIM35972I
SYSMOD sysmod, WHICH IS SUPERSEDED BY THE INDICATED SYSMOD, FAILED.
GIM35973I
FIXCAT HOLD reasonid WAS NOT RESOLVED.
GIM35974I
FIXCAT HOLD reasonid WAS BYPASSED.
GIM35975I
FIXCAT HOLD reasonid WAS BYPASSED BECAUSE CLASS class WAS BYPASSED.
GIM35976I
FIXCAT HOLD reasonid WAS NOT RESOLVED. SYSMOD sysmod WOULD HAVE SUPERSEDED reasonid, BUT HAS FAILED.
GIM35977I
FIXCAT HOLD reasonid WAS NOT RESOLVED. SYSMOD sysmod WOULD HAVE SUPERSEDED reasonid, BUT WAS EXCLUDED.
GIM36000S
THE suboper SUBOPERAND ON THE BYPASS OPERAND WAS FOUND ON THE RECEIVE COMMAND. THIS RELEASE OF SMP/E DOES NOT SUPPORT THE suboper SUBOPERAND. OS/390® RELEASE 5 OR HIGHER IS NEEDED.
GIM36100I
DATA SET sysut1 WAS action INTO DATA SET sysut2.
GIM36201E
THE ./ CHANGE STATEMENT WAS MISSING FROM THE INPUT FOR THE UPDATE UTILITY.
GIM36202E
THERE WAS MORE THAN ONE ./ CHANGE STATEMENT IN THE INPUT FOR THE UPDATE UTILITY.
GIM36203E
AN UPDATE CONTROL STATEMENT FOLLOWS A ./ ENDUP STATEMENT. THIS IS NOT ALLOWED.
GIM36204E
THE SEQUENCE NUMBERS ARE OUT OF ORDER IN THE INPUT FOR THE UPDATE UTILITY.
GIM36301E
value IS NOT ALLOWED AS operand1 AND operand2.
GIM36302E
THE ++IF FMID VALUE MATCHES THE ++VER FMID VALUE. THIS IS NOT ALLOWED.
GIM36303E
ONE ++VER MCS IN THE SYSMOD SPECIFIES AN FMID VALUE, BUT ANOTHER DOES NOT. THIS IS NOT ALLOWED.
GIM36304E
THE ++VER operand OPERAND IS NOT ALLOWED IN A SERVICE SYSMOD.
GIM36305E
THE ++IF FMID VALUE MATCHES THE ID VALUE ON THE SYSMOD. THIS IS NOT ALLOWED.
GIM36306E
THE ++ASSIGN MCS IS OUT OF SEQUENCE.
GIM36307E
THE ++HOLD MCS IS OUT OF SEQUENCE.
GIM36308E
THE ++mcsname FOR entname MCS IS OUT OF SEQUENCE.
GIM36401E
command PROCESSING FAILED FOR sysmod1 AND sysmod2 BECAUSE SYSMOD sysmod1 DELETES SYSMOD sysmod2. ONLY ONE OF THESE SYSMODS CAN BE PROCESSED AT A TIME.
GIM36500E
ALLZONES IS NOT ALLOWED AS THE VALUE OF THE RECEXZGRP OPERAND.
GIM36600E
svc99 FAILED FOR THE dataset DATA SET USING THE ddname DDNAME - errortext
GIM36600S
svc99 FAILED FOR THE dataset DATA SET USING THE ddname DDNAME - errortext
GIM36700I
GIMXTRX function PROCESSING HAS ENDED. THE HIGHEST RETURN CODE WAS rtncode.
GIM36800E
SHELL SCRIPT shellscr IS NEEDED TO PROCESS elmtype elmname FOR SYSMOD sysmod1, BUT IS BEING DELETED BY SYSMOD sysmod2.
GIM36901E
SYSMOD sysmod WAS SPECIFIED ON THE SELECT OPERAND BUT IS NOT IN THE SMPPTFIN DATA SET.
GIM37001S
command PROCESSING STOPPED BECAUSE FUNCTION SYSMOD sysmod FAILED.
GIM37100S
REQUIRED KEYWORD PARAMETER keyword IS MISSING OR INVALID.
GIM37101S
REQUIRED CONTROL STATEMENT stmt IS MISSING.
GIM37150I
THE keyword IS MISSING OR INVALID.
GIM37150S
THE keyword KEYWORD IS MISSING OR INVALID.
GIM37201E
command PROCESSING FAILED FOR sysmod1 AND sysmod2 BECAUSE sysmod1 AND sysmod2 ARE MUTUALLY EXCLUSIVE SYSMODS. ONLY ONE OF THESE SYSMODS CAN BE PROCESSED AT A TIME.
GIM37301E
SYSMOD sysmod HAS MORE THAN ONE APPLICABLE ++VER MCS. ONLY ONE IS ALLOWED.
GIM37401I
PROCESSING FAILED FOR SYSMOD sysmod1. sysmod1 REQUIRES SYSMOD sysmod2. HOWEVER, SYSMOD sysmod2 SPECIFIES sysmod1 ON ITS ++VER operand OPERAND.
GIM37500I
GIMXTRX function PROCESSING HAS ENDED. THE OUTPUT DATA SET NAME IS dataset.
GIM37600S
command PROCESSING FAILED FOR THE dataset DATA SET.
GIM37701S
SMPTLIB smptlib WAS NOT DELETED BECAUSE IT IS DEFINED AS A DUMMY DATA SET.
GIM37702I
SMPTLIB smptlib WAS NOT DELETED FROM VOLUME volser BECAUSE THE DATA SET WAS NOT FOUND.
GIM37703W
SMPTLIB smptlib WAS NOT DELETED FROM VOLUME volser BECAUSE ERROR CODE errcode WAS ISSUED BY DYNAMIC ALLOCATION.
GIM37704S
SMPTLIB smptlib WAS NOT DELETED BECAUSE NO VOLUMES WERE SPECIFIED.
GIM37705W
SMPTLIB smptlib WAS NOT DELETED BECAUSE ERROR CODE errcode WAS ISSUED BY DYNAMIC ALLOCATION.
GIM37801E
++mcsname1 AND ++mcsname2 FOR ELEMENT elmname ARE NOT ALLOWED IN THE SAME SYSMOD.
GIM37901E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE IT WAS PREVIOUSLY SUPERSEDED.
GIM37902E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE IT WAS PREVIOUSLY DELETED.
GIM37903E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE IT HAS NO APPLICABLE ++VER MCS.
GIM37904E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE OF AN ERROR DURING A PREVIOUS ATTEMPT TO RESTORE sysmod.
GIM37905E
ACCEPT PROCESSING FAILED FOR SYSMOD sysmod1. SYSMOD sysmod1 IS SUPERSEDED BY SYSMOD sysmod2 IN TARGET ZONE zonename, AND THEREFORE MUST BE SUPERSEDED DURING ACCEPT PROCESSING. ALL SYSMODS WHICH WOULD HAVE SUPERSEDED sysmod1 HAVE EITHER FAILED OR ARE MISSING.
GIM38001E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE THE SYSMOD ENTRY FOR sysmod IN THE zonename ZONE WAS IN ERROR.
GIM38101E
command PROCESSING STOPPED. A ++mcsname MCS IN SYSMOD sysmod APPLIES TO ELEMENT elmname, WHICH WAS DELETED BY ANOTHER SYSMOD THAT IS BEING PROCESSED.
GIM38201W
THERE IS A MODID ERROR FOR elmtype ENTRY elmname IN SYSMOD sysmod.
GIM38201E
THERE IS A MODID ERROR FOR elmtype ENTRY elmname IN SYSMOD sysmod.
GIM38202W
THERE IS A MODID ERROR FOR ASSEMBLY asmname FOR elmtype ENTRY elmname IN SYSMOD sysmod.
GIM38202E
THERE IS A MODID ERROR FOR ASSEMBLY assembly FOR elmtype ENTRY elmname IN SYSMOD sysmod.
GIM38300S
AN I/O ERROR OCCURRED DURING GIMXTRX command PROCESSING FOR THE dataset DATA SET.
GIM38401E
command PROCESSING FAILED FOR sysmod1 AND sysmod2. SYSMOD sysmod1 DELETES OTHER SYSMODS, BUT IT IS SUPERSEDED BY SYSMOD sysmod2. ONLY ONE OF THESE SYSMODS CAN BE PROCESSED AT A TIME.
GIM38501I
SYSMOD sysmod WAS NOT RECEIVED BECAUSE THE RETURN CODE FROM THE EXIT ROUTINE IS 8 OR HIGHER.
GIM38601I
SYSMOD sysmod WAS NOT RECEIVED BECAUSE IT HAS ALREADY BEEN RECEIVED.
GIM38601E
SYSMOD sysmod WAS NOT RECEIVED BECAUSE IT HAS ALREADY BEEN RECEIVED.
GIM38701I
SYSMOD sysmod WAS NOT RECEIVED BECAUSE IT WAS NOT SPECIFIED ON THE SELECT OPERAND.
GIM38801I
SYSMOD sysmod WAS NOT RECEIVED BECAUSE IT WAS SPECIFIED ON THE EXCLUDE OPERAND.
GIM38901I
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE IT HAS NO APPLICABLE ++VER MCS.
GIM39001E
SYSMOD sysmod WAS NOT RECEIVED EVEN THOUGH IT WAS SPECIFIED ON THE SELECT OPERAND.
GIM39101E
SYSMOD sysmod WAS NOT RECEIVED BECAUSE AN ERROR OCCURRED DURING SMPTLIB DATA SET PROCESSING.
GIM39200S
modtype MODULE modname COULD NOT BE LOADED. SMP/E SERVICE UPDATE FACILITY PROCESSING IS STOPPED. ABEND CODE: abncode REASON CODE: rsncode
GIM39201S
modtype MODULE modname COULD NOT BE LOADED. SMP/E COMPACTION SERVICE PROCESSING IS STOPPED. ABEND CODE: abncode REASON CODE: rsncode.
GIM39202S
modtype MODULE modname COULD NOT BE LOADED. progname PROCESSING IS STOPPED. ABEND CODE: abncode REASON CODE: rsncode.
GIM39203S
MODULE loadmod COULD NOT BE LOADED. command PROCESSING IS STOPPED. ABEND CODE abncode REASON CODE rsncode.
GIM39301I
SHELL SCRIPT shellscr PROCESSING FOR elmtype elmname IN THE library LIBRARY WAS SUCCESSFUL. SEQUENCE NUMBER seqno.
GIM39302E
SHELL SCRIPT shellscr PROCESSING FOR elmtype elmname IN THE library LIBRARY FAILED FOR SYSMOD sysmod. SEQUENCE NUMBER seqno.
GIM39303E
THE PRE VALUE IS NOT ALLOWED ON THE SHSCRIPT OPERAND OF THE ++SHELLSCR MCS FOR elmname.
GIM39304E
THE SHELL SCRIPT NAME ON THE SHSCRIPT OPERAND, shellscr, DOES NOT MATCH THE ++SHELLSCR NAME elmname. THIS IS NOT ALLOWED.
GIM39305E
THE SHELL SCRIPT NAME FOR THE SHSCRIPT SUBENTRY MUST MATCH THE NAME OF THE SHELLSCR ENTRY.
GIM39306E
THE PRE VALUE IS NOT ALLOWED IN THE SHSCRIPT SUBENTRY FOR SHELLSCR ENTRIES.
GIM39307I
ALLOCATION FAILED FOR library, WHICH IS REQUIRED IN ORDER TO INVOKE SHELL SCRIPT shellscr FOR elmtype elmname IN SYSMOD sysmod.
GIM39308E
SHELL SCRIPT shellscr CANNOT PROCESS elmtype elmname IN SYSMOD sysmod BECAUSE SYSLIB library FOR SHELL SCRIPT shellscr IS NOT ALLOCATED TO A PATH.
GIM39309E
SHELL SCRIPT shellscr PROCESSING IN THE elmtype LIBRARY FOR elmname sysmod IN SYSMOD library FAILED. THE RETURN CODE FROM THE service SERVICE WAS rtncode AND THE REASON CODE WAS rsncode.
GIM39310I
SHELL SCRIPT shellscr PROCESSING TO DELETE elmtype elmname IN THE library LIBRARY WAS SUCCESSFUL. SEQUENCE NUMBER seqno.
GIM39311E
SHELL SCRIPT shellscr PROCESSING TO DELETE elmtype elmname IN THE library LIBRARY FAILED FOR SYSMOD sysmod. SEQUENCE NUMBER seqno.
GIM39312I
SHELL SCRIPT shellscr PROCESSING FOR elmtype elmname IN THE library LIBRARY FAILED FOR SYSMOD sysmod.
GIM39313E
elmtype elmname CANNOT BE PROCESSED IN LIBRARY library FOR SYSMOD sysmod BECAUSE library IS NOT ALLOCATED TO A PATH.
GIM39314E
SHELL SCRIPT shellscr PROCESSING FOR elmtype elmname IN THE ddname LIBRARY FAILED. SEQUENCE NUMBER seqno.
GIM39317I
ALLOCATION FAILED FOR library, WHICH IS REQUIRED IN ORDER TO INVOKE SHELL SCRIPT shellscr TO DELETE elmtype elmname FOR SYSMOD sysmod.
GIM39318E
SHELL SCRIPT shellscr CANNOT DELETE elmtype elmname FOR SYSMOD sysmod BECAUSE SYSLIB library FOR SHELL SCRIPT shellscr IS NOT ALLOCATED TO A PATH.
GIM39319E
SHELL SCRIPT shellscr PROCESSING IN THE ddname LIBRARY FOR elmtype elmname FAILED. THE RETURN CODE FROM THE service SERVICE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM39401I
SMPTLIB DATA SETS WERE LOADED FOR SYSMOD sysmod.
GIM39402I
SMPTLIB DATA SETS WERE LOADED FOR SYSMOD sysmod. THE RETURN CODE FROM THE COPY UTILITY WAS rtncode.
GIM39500S
THE REPORT CALLLIBS COMMAND IS NO LONGER SUPPORTED. USE THE LINK LMODS COMMAND INSTEAD.
GIM39601E
SYSMOD sysmod WAS NOT RECEIVED BECAUSE IT HAS NO ++VER MCS.
GIM39701W
SYSMOD sysmod HAS NO ELEMENTS.
GIM39701E
SYSMOD sysmod HAS NO ELEMENTS.
GIM39801I
SYSMOD sysmod WAS NOT RECEIVED BECAUSE IT HAS A SYNTAX OR CONSTRUCTION ERROR.
GIM39802E
A SYNTAX OR CONSTRUCTION ERROR WAS FOUND IN SYSMOD sysmod IN THE SMPPTS DATA SET.
GIM399I
ENTER THE JULIAN DATE (yyddd) OR “U”.
GIM40001E
SYSMOD sysmod HAS ALREADY BEEN FOUND IN THE SMPPTFIN DATA SET THAT IS CURRENTLY BEING PROCESSED.
GIM40002E
ANOTHER ++mcstype MCS FOR mcsname HAS ALREADY BEEN FOUND IN THE SMPPTFIN DATA SET THAT IS CURRENTLY BEING PROCESSED.
GIM40101E
command PROCESSING FAILED FOR SYSMOD sysmod EVEN THOUGH IT WAS SPECIFIED ON THE SELECT OPERAND. sysmod IS NOT IN THE zonetype ZONE.
GIM40102E
command PROCESSING FAILED FOR SYSMOD sysmod1. sysmod1 IS A CROSS-ZONE REQUISITE FROM ZONE zonename FOR FMID sysmod2, BUT sysmod1 IS NOT IN THE GLOBAL ZONE.
GIM40103E
command PROCESSING FAILED FOR SYSMOD sysmod1. sysmod1 IS A CROSS-ZONE REQUISITE FROM ZONE zonename FOR FMID sysmod2 BUT sysmod1 WAS EXCLUDED.
GIM40104E
ACCEPT PROCESSING FAILED FOR SYSMOD sysmod1. sysmod1 IS A CROSS-ZONE REQUISITE FROM ZONE zonename FOR FMID sysmod2 BUT sysmod1 COULD NOT BE PROCESSED BECAUSE BYPASS(APPLYCHECK) WAS NOT SPECIFIED.
GIM40201E
THE operand OPERAND IS NOT ALLOWED FOR SUPERSEDED ONLY SYSMODS.
GIM40202E
THE operand OPERAND IS NOT ALLOWED FOR DELETED SYSMODS
GIM40203E
STATUS OPERANDS ARE NOT ALLOWED FOR DELETED SYSMODS.
GIM40204E
STATUS OPERANDS ARE NOT ALLOWED FOR SUPERSEDED ONLY SYSMODS.
GIM40300E
THE operand OPERAND IS MUTUALLY EXCLUSIVE WITH ALL OTHER SYSMOD SUBENTRIES.
GIM40401W
SMP/E DID NOT RESTORE enttype entname FOR SYSMOD sysmod BECAUSE enttype entname IS NOT IN THE library LIBRARY.
GIM40501E
THE DISTLIB VALUE distlib1 SPECIFIED FOR enttype entname IN SYSMOD sysmod DOES NOT MATCH THE DISTLIB VALUE distlib2 IN THE enttype ENTRY FOR entname.
GIM40600I
SMP/E PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR enttype entname IN SYSMOD sysmod. BLANK DATA HAS BEEN TRUNCATED. DATE yy.ddd - TIME hh:mm:ss
GIM40700E
SMP/E PROCESSING TO THE library LIBRARY FAILED FOR enttype entname IN SYSMOD sysmod. NON-BLANK DATA WOULD HAVE BEEN TRUNCATED. DATE yy.ddd – TIME hh:mm:ss
GIM40800I
command PROCESSING FAILED FOR SYSMOD sysmod. SMP/E PROCESSING FAILED FOR AN ELEMENT IN sysmod.
GIM40901E
COPY PROCESSING TO THE library LIBRARY FAILED FOR elmtype elmname IN SYSMOD sysmod. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM40902I
COPY PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR elmtype elmname IN SYSMOD sysmod. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM40902W
COPY PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR elmtype elmname IN SYSMOD sysmod. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM40903E
COPY PROCESSING TO THE library LIBRARY FAILED FOR elmtype elmname IN SYSMOD sysmod. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM40904E
STOW PROCESSING TO THE library LIBRARY FAILED FOR alias (ALIAS of elmtype elmname) IN SYSMOD sysmod.
GIM40905I
COPY PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR elmtype elmname.
GIM40905W
COPY PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR elmtype elmname. THE RETURN CODE WAS rtncode.
GIM40906E
COPY PROCESSING TO THE library LIBRARY FAILED FOR elmtype elmname. THE RETURN CODE rtncode EXCEEDED THE ALLOWABLE VALUE OF max.
GIM41001E
command PROCESSING FAILED FOR sysmod1 BECAUSE BOTH sysmod1 AND sysmod2 CONTAIN ZAP UPDATES FOR MODULE modname. ONLY ONE OF THESE SYSMODS CAN BE PROCESSED AT A TIME.
GIM41101W
SMP/E DID NOT RESTORE enttype ENTRY entname FOR SYSMOD sysmod BECAUSE enttype entname WAS CHANGED BY changer.
GIM41101E
SMP/E DID NOT RESTORE enttype ENTRY entname FOR SYSMOD sysmod BECAUSE enttype entname WAS CHANGED BY changer.
GIM41201S
SMP/E CANNOT DETERMINE THE RELATIONSHIPS BETWEEN THE FOLLOWING SYSMODS:
GIM41301I
SYSMOD=sysmod FMID=fmid PRE=prereq.
GIM41400W
THE EFFECTIVE UID COULD NOT BE CHANGED BACK TO uidval. THE RETURN CODE FROM THE service CALLABLE SERVICE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM41401W
THE REAL UID COULD NOT BE CHANGED BACK TO uidval. THE RETURN CODE FROM THE service CALLABLE SERVICE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM41501E
THE ++mcsname MCS FOR ELEMENT elmname IN SYSMOD sysmod WAS NOT PROCESSED BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM41601E
DALIAS dalias FOR MOD modname HAS BEEN FOUND AS A MOD ENTRY WITH THE SAME DISTLIB.
GIM41700E
SYSMOD sysmod, SPECIFIED ON A JCLIN SMPE-IF CONTROL STATEMENT, IS IN ERROR. JCLIN PROCESSING HAS FAILED.
GIM41701E
THE statement JCLIN CONTROL STATEMENT IS NOT IN A PROPER PLACE IN THE JCLIN INPUT STREAM. JCLIN PROCESSING HAS FAILED.
GIM41702E
JCLIN PROCESSING FAILED BECAUSE SMP/E REACHED END-OF-FILE ON THE JCLIN INPUT STREAM WITHOUT FINDING AN SMPE-END CONTROL STATEMENT NEEDED TO CLOSE AN OPEN DO/END GROUP STARTED BY THE FOLLOWING JCLIN CONTROL STATEMENT - statement
GIM41703I
JCLIN PROCESSING IS SKIPPING JCLIN INPUT STREAM RECORDS FOUND AFTER THE FOLLOWING JCLIN CONTROL STATEMENT - statement
GIM41704I
number JCLIN INPUT STREAM RECORDS WERE SKIPPED BEFORE FINDING THE APPROPRIATE SMPE-END CONTROL STATEMENT.
GIM41799E
A JCLIN CONTROL STATEMENT THAT IS SUPPORTED ONLY BY z/OS release SMP/E (OR HIGHER) HAS BEEN ENCOUNTERED IN THE JCLIN INPUT STREAM.
GIM41801I
JCLIN PROCESSING FAILED FOR SYSMOD sysmod.
GIM41802I
JCLIN PROCESSING WAS SUCCESSFUL FOR SYSMOD sysmod.
GIM41901E
THE GLOBAL ZONE SYSMOD ENTRY FOR sysmod INDICATES THAT IT CONTAINS A ++mcstype MCS. HOWEVER, THERE IS NO ++mcstype MCS FOR sysmod IN THE SMPPTS DATA SET.
GIM42001I
THE FOLLOWING CONDITIONS FOR SYSMOD sysmod WERE NOT SATISFIED, BUT WERE IGNORED BECAUSE THE BYPASS OPERAND WAS SPECIFIED. PROCESSING CONTINUES.
GIM42001W
THE FOLLOWING CONDITIONS FOR SYSMOD sysmod WERE NOT SATISFIED, BUT WERE IGNORED BECAUSE THE BYPASS OPERAND WAS SPECIFIED. PROCESSING CONTINUES.
GIM42003W
SYSMOD sysmod1 IN ZONE zonename HAS A CROSS-ZONE REQUISITE FOR SYSMOD sysmod2. THE CROSS-ZONE REQUISITE WILL NO LONGER BE SATISFIED WHEN SYSMOD sysmod2 IS RESTORED.
GIM42100W
AN ATTEMPT TO OBTAIN THE NAME OF THE PHYSICAL DATA SET CONTAINING THE DIRECTORY FOR ddname FAILED. THE RETURN CODE FROM THE service CALLABLE SERVICE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM42201E
THE UCLIN CHANGES WERE NOT MADE BECAUSE THE ++LMODIN INPUT CONTAINS MULTIPLE NAME STATEMENTS. ONLY ONE NAME STATEMENT IS ALLOWED.
GIM42202E
THE UCLIN CHANGES WERE NOT MADE BECAUSE THE ++LMODIN INPUT IS INCORRECT. LINK–EDIT CONTROL STATEMENTS MAY NOT BE SELECTIVELY DELETED.
GIM42301S
THE SPECIFIED DATE IS NOT IN THE EXPECTED RANGE.
GIM42401I
THE FOLLOWING PARAMETERS WERE SPECIFIED ON THE EXEC STATEMENT FOR GIMSMP: parameters.
GIM42500W
AN ATTEMPT TO OBTAIN THE NAME OF THE PHYSICAL DATA SET CONTAINING A SYMBOLIC LINK FOR elmtype elmname IN library FAILED. THE RETURN CODE FROM THE service CALLABLE SERVICE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM42601E
SYSMOD sysmod1 WAS NOT APPLIED BECAUSE IT DELETES SYSMOD sysmod2, WHICH WAS ALREADY APPLIED. sysmod1 CAN ONLY BE APPLIED IF IT IS SPECIFIED ON THE SELECT OPERAND.
GIM42602E
SYSMOD sysmod1 WAS NOT ACCEPTED BECAUSE IT DELETES SYSMOD sysmod2, WHICH WAS ALREADY ACCEPTED. sysmod1 CAN ONLY BE ACCEPTED IF IT IS SPECIFIED ON THE SELECT OPERAND.
GIM42701E
SYSMOD sysmod1 WAS NOT APPLIED BECAUSE IT IS MUTUALLY EXCLUSIVE (NPRE) WITH FUNCTION SYSMOD sysmod2, WHICH WAS ALREADY APPLIED.
GIM42702E
SYSMOD sysmod1 WAS NOT ACCEPTED BECAUSE IT IS MUTUALLY EXCLUSIVE (NPRE) WITH FUNCTION SYSMOD sysmod2, WHICH WAS ALREADY ACCEPTED.
GIM42800S
THE keyword KEYWORD HAS BEEN SPECIFIED MORE THAN ONCE IN THE dataset DATA SET.
GIM42801S
progname PROCESSING FAILED. THE archid ATTRIBUTE VALUE archive_id WAS SPECIFIED IN MORE THAN ONE tag TAG IN FILE file. AN archid ATTRIBUTE VALUE MUST BE UNIQUE WITHIN A PACKAGE.
GIM42802S
THE attribute1 ATTRIBUTE IS MISSING BUT IS REQUIRED WHEN attribute2-value IS SPECIFIED.
GIM42810W
THE keyword KEYWORD IS NO LONGER ALLOWED IN THE dataset DATA SET. USE THE FTP.DATA DATA SET INSTEAD TO SPECIFY THIS OPTION.
GIM42901E
SYSMOD sysmod1 WAS NOT RESTORED BECAUSE elmtype elmname IS IN BOTH SYSMOD sysmod1 AND SYSMOD sysmod2, BUT sysmod2 IS ACCEPTED IN ERROR.
GIM42902E
SYSMOD sysmod1 WAS NOT RESTORED BECAUSE elmtype elmname IS IN BOTH SYSMOD sysmod1 AND SYSMOD sysmod2, BUT sysmod2 HAS NOT BEEN ACCEPTED.
GIM42903E
SYSMOD sysmod1 WAS NOT RESTORED BECAUSE elmtype elmname IS IN BOTH SYSMOD sysmod1 AND SYSMOD sysmod2, BUT sysmod2 HAS FAILED.
GIM43001I
zonename ZONE umidtype sysmod IS NOT APPLIED.
GIM43002I
zonename ZONE umidtype sysmod WAS NOT RESTORED BECAUSE RELATED SYSMODS FAILED.
GIM43003I
zonename ZONE umidtype sysmod IS APPLIED.
GIM43004I
zonename ZONE umidtype sysmod IS SUPERSEDED.
GIM43005I
zonename ZONE umidtype sysmod IS DELETED.
GIM43006I
zonename ZONE umidtype sysmod IS ACCEPTED BUT NOT APPLIED.
GIM43007I
zonename ZONE umidtype sysmod IS ACCEPTED IN ERROR.
GIM43008I
zonename ZONE umidtype sysmod IS ACCEPTED BUT SUPERSEDED ONLY.
GIM43009I
sysmod IS THE FMID IN THE DLIB ZONE BUT NOT IN THE TARGET ZONE.
GIM43010I
zonename ZONE RMID sysmod DOES NOT SPECIFY ONE OF THE DLIB ZONE MODIDS AS A ++VER PRE OR ++VER SUP VALUE.
GIM43011I
zonename ZONE umidtype sysmod IS APPLIED BUT NOT ACCEPTED.
GIM43012I
zonename ZONE UMID sysmod IS NOT SPECIFIED BY ONE OF THE TARGET ZONE MODIDS AS A ++VER PRE OR ++VER SUP VALUE.
GIM43101E
THERE IS NO value VALUE FOR elmtype elmname IN SYSMOD sysmod.
GIM43201T
PROGRAM progname FAILED WITH A abntype ABEND CODE OF abncode.
GIM43301E
SYSMOD sysmod1 WAS NOT RESTORED BECAUSE sysmod1 IS SUPERSEDED BY SYSMOD sysmod2, WHICH IS NOT BEING RESTORED.
GIM43401W
elmtype elmname IN SYSMOD sysmod WAS NOT INSTALLED IN ANY TARGET LIBRARY.
GIM43500E
THE CALL TO THE service SERVICE FAILED. THE RETURN CODE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM43500S
THE CALL TO THE service SERVICE FAILED. THE RETURN CODE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM43500W
THE CALL TO THE service SERVICE FAILED. THE RETURN CODE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM43501E
THE CALL TO THE service SERVICE FAILED WHEN PROCESSING name. THE RETURN CODE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM43501I
WRITE PROCESSING FAILED FOR pathname.
GIM43501S
THE CALL TO THE service SERVICE FAILED WHEN PROCESSING name. THE RETURN CODE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM43501W
THE CALL TO THE service SERVICE FAILED WHEN PROCESSING name. THE RETURN CODE WAS 'rtncode'X AND THE REASON CODE WAS 'rsncode'X.
GIM43502E
An attempt to access the catalog entry for data set dataset failed. The return code was catrc and the reason code was catrsn.
GIM43502S
An attempt to access the catalog entry for data set dataset failed. The return code was catrc and the reason code was catrsn.
GIM43503E
An attempt to access the catalog entry for data set dataset failed. There is not enough storage for the Catalog Search Interface to complete the request.
GIM43503S
An attempt to access the catalog entry for data set dataset failed. There is not enough storage for the Catalog Search Interface to complete the request.
GIM43504E
An unusual condition occurred when attempting to access the catalog entry for data set dataset. The return code from the Catalog Search Interface was svcrc. The catalog return code was catrc and the catalog reason code was catrsn.
GIM43504S
An unusual condition occurred when attempting to access the catalog entry for data set dataset. The return code from the Catalog Search Interface was svcrc. The catalog return code was catrc and the catalog reason code was catrsn.
GIM43601E
THE VERNUM IN THE UCLIN CHANGES MUST MATCH THE EXISTING VERNUM VALUE IN THE SYSMOD ENTRY.
GIM43701T
ESTAE ERROR RECOVERY PROCESSING FAILED WITH A RETURN CODE OF rtncode.
GIM43801T
SMP/E COULD NOT INITIALIZE ITS UTILITY INTERFACE. THE REASON CODE WAS rsncode.
GIM43802T
SMP/E COULD NOT INITIALIZE ITS UTILITY INTERFACE. THE REASON CODE WAS rsncode. THE RETURN CODE WAS rtncode.
GIM43901S
RETRY PROCESSING FAILED FOR THE library LIBRARY.
GIM43901T
RETRY PROCESSING FAILED FOR THE library LIBRARY.
GIM43903I
RETRY PROCESSING WILL BE ATTEMPTED FOR THE library LIBRARY.
GIM43904I
SMP/E WILL DEBATCH UPDATES AND PROCESS MEMBERS ONE AT A TIME FOR THE library LIBRARY.
GIM43905I
A POSSIBLE STORAGE SHORTAGE HAS OCCURRED FOR A LINK-EDIT SUBTASK. SMP/E WILL FREE AS MUCH STORAGE AS POSSIBLE AND RETRY THE FAILING SUBTASK FOR THE library LIBRARY.
GIM44001I
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE.
GIM44002S
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY TO PROCESS THE library LIBRARY.
GIM44003S
USER ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY TO PROCESS THE library LIBRARY.
GIM44004S
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT IS NOT THE LIBRARY BEING UPDATED BY SMP/E.
GIM44005S
SYSTEM ABEND abncode OCCURRED AFTER SMP/E CALLED THE utility UTILITY TO PROCESS THE library LIBRARY. NO SYSTEM DIAGNOSTIC WORK AREA (SDWA) WAS PROVIDED TO THE ESTAE ROUTINE.
GIM44006S
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY TO PROCESS THE library LIBRARY. THE library LIBRARY RAN OUT OF SPACE. THE RETRY EXIT ROUTINE CANCELED RETRY PROCESSING.
GIM44006T
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY TO PROCESS THE library LIBRARY. THE library LIBRARY RAN OUT OF SPACE. THE RETRY EXIT ROUTINE CANCELED RETRY PROCESSING.
GIM44007E
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT WAS NOT SPECIFIED IN THE RETRYDDN LIST.
GIM44007I
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT WAS NOT SPECIFIED IN THE RETRYDDN LIST.
GIM44008E
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT WAS EXCLUDED VIA THE EXRTYDD LIST.
GIM44008I
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT WAS EXCLUDED VIA THE EXRTYDD LIST.
GIM44009E
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE RETRY(NO) WAS SPECIFIED ON THE command COMMAND.
GIM44010S
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E INVOKED SHELL SCRIPT shellscr TO PROCESS elmtype elmname.
GIM44012E
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE SMPTLOAD LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT WAS ALLOCATED AS NEW AND THERE IS NO UNUSED SPACE TO BE REGAINED BY COMPRESSING THE LIBRARY.
GIM44013I
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT IS A PDSE.
GIM44014I
SYSTEM ABEND abncode OCCURRED WITH A REASON CODE OF rsncode AFTER SMP/E CALLED THE utility UTILITY. THE library LIBRARY RAN OUT OF SPACE. THE LIBRARY IS NOT ELIGIBLE FOR RETRY PROCESSING BECAUSE IT IS A DIRECTORY IN THE FILE SYSTEM.
GIM44015S
SYSTEM ABEND abncode OCCURRED AFTER SMP/E CALLED THE utility UTILITY TO PROCESS THE library LIBRARY.
GIM44016S
USER ABEND abncode OCCURRED AFTER SMP/E CALLED THE utility UTILITY TO PROCESS THE library LIBRARY.
GIM44017S
SYSTEM ABEND abncode OCCURRED AFTER SMP/E INVOKED SHELL SCRIPT shellscr TO PROCESS elmtype elmname.
GIM44101E
SYSMOD sysmod DOES NOT SUPERSEDE UMID umid FOR elmtype elmname.
GIM44201I
GIMMPVIA - AN ATTEMPT IS BEING MADE TO UPDATE A ZONE THAT IS OPEN FOR READ ONLY.
GIM44202I
GIMMPVIA - THE REQUIRED VPL CONNECTION FOR THIS FUNCTION IS NOT AVAILABLE.
GIM44203I
GIMMPVIA - A RECORD LENGTH OF ZERO OCCURRED WITH AN ADD OR UPDATE FUNCTION.
GIM44204I
GIMMPVIA - NO BUFFER IS AVAILABLE FOR A VPL FUNCTION THAT REQUIRES ONE.
GIM44205I
GIMMPVIA - NO KEYLENGTH IS SUPPLIED FOR A VPL FUNCTION THAT REQUIRES ONE.
GIM44207I
GIMMPVIA - AN UNRECOGNIZABLE VSAM I/O FUNCTION WAS ATTEMPTED.
GIM44208I
GIMMPVIA - A SHOWCB MACRO FAILED, EITHER FOR FEEDBACK CODE AFTER A FAILED I/O REQUEST, OR FOR LENGTH AFTER A SUCCESSFUL GET.
GIM44209I
GIMMPVIA - THE KEYLENGTH SUPPLIED IS GREATER THAN THE MAXIMUM ALLOWED.
GIM44210I
GIMMPVIA - A SEQUENCING ERROR OCCURRED UPDATING A VSAM RECORD.
GIM44211I
GIMMPVIA - A SEQUENCING ERROR OCCURRED DELETING A VSAM RECORD.
GIM44212T
GIMMPMRM - IOPTYPE ioptype IS NOT A MAP/REMAPPABLE ENTRY TYPE.
GIM44213T
GIMMPMRM - THIS UNKNOWN IOPTYPE IS NOT MAP/REMAPPABLE.
GIM44214I
GIMMPMRM - THE IOPDSID IS UNKNOWN.
GIM44215I
GIMMPMRM - IOPFUNCT iopfunct IS NOT SUPPORTED.
GIM44216I
GIMMPMRM - THE IOPFUNCT IS UNKNOWN.
GIM44217I
GIMMPMRM - modname +‘ offset ’ CALLED GIMMPIO FOR iopfunct FOR ioptype iopname.
GIM44218T
GIMMPMRM - NO VPLMSGP ERROR TEXT WAS RETURNED FROM GIMMPVIA.
GIM44220T
GIMMPMRM - THERE IS AN ERROR IN THE IOPTYPE VALUE PASSED TO GIMADTBL.
GIM44221E
GIMMPMRM - A DUPLICATE RECORD WAS DETECTED WHILE TRYING TO ADD TO THE zonename ZONE.
GIM44222I
GIMMPVIA - THE FUNCTION REQUESTED (VPLFUNCT) IS NOT SUPPORTED.
GIM44223I
GIMMPVIA - THE VSAM ACCESS ID (VPLACID) IS INVALID.
GIM44224I
GIMMPVIA - THE CLUSTER IS NOT OPEN. ACCESS IS DENIED.
GIM44225I
GIMMPVIA - VSAM DATA SET dataset IS OUT OF SPACE.
GIM44227I
GIMMPVIA - THE ZONE CANNOT BE OPENED. THE ZONE NAME (VPLZNAME) FOR THE SMPCSI MUST BE SMPCSI OR GLOBAL.
GIM44228I
GIMMPVIA - THE zonename ZONE WAS ALREADY OPEN.
GIM44229I
GIMMPVIA - ZONE zonename CANNOT BE OPENED FOR UPDATE BECAUSE THE PATH CONTAINING THE ZONE IS ALREADY OPENED WITH ‘NOUPDATE‘.
GIM44230I
GIMMPVIA - THE PATH FOR THE ZONE CANNOT BE DETERMINED BECAUSE THE DATA SET NAME IS NOT AVAILABLE.
GIM44231I
GIMMPVIA - THE ACCESS ID IS INVALID FOR A ZONE OPEN FUNCTION.
GIM44232I
GIMMPVIA - DYNAMIC ALLOCATION FAILED FOR THE zonename ZONE, DATA SET dataset.
GIM44233I
GIMMPVIA - A PREALLOCATED VSAM DATA SET WAS NOT FOUND FOR THE zonename ZONE.
GIM44234I
GIMMPVIA - SMPCSI DATA SET dataset IS BUSY.
GIM44236I
GIMMPVIA - EITHER THE ACCESS ID (VPLACID) IS NOT ZERO, OR THE ZONE NAME (VPLZNAME) IS NOT BLANK. THIS COMBINATION IS INVALID FOR ZONE CLOSE.
GIM44237I
GIMMPVIA - A QUALIFIED ZONE MAY NOT HAVE A NAME OF SMPCSI OR GLOBAL. THIS IS A ZONE OPEN ERROR.
GIM44238I
GIMMPRPS - THE FUNCTION (RRLFUNCT) IS NOT RECOGNIZED.
GIM44239I
GIMMPRPS - THERE IS A LOGIC ERROR IN THE ASSERTION REQUEST. THIS ASSERTION IS UNSUPPORTED.
GIM44240I
GIMMPRPS - THE ZONE PATH ID IS INVALID.
GIM44241I
GIMMPRPS - THE CATEGORY IS INVALID.
GIM44242I
GIMMPRPS - A FREEPOOL ERROR OCCURRED. THE POOL IS MISSING.
GIM44243I
GIMMPRPS - THE RECORD TO BE DEASSIGNED IS MISSING.
GIM44244W
GIMVSMSG - NO REPRESENTATIONS MET INPUT REQUIREMENTS.
GIM44245E
GIMVSMSG - THE MAIN RESOURCE IS NOT AVAILABLE.
GIM44245S
GIMVSMSG - THE MAIN RESOURCE IS NOT AVAILABLE.
GIM44246T
GIMVSMSG - THERE IS A PROBABLE PHYSICAL I/O ERROR.
GIM44247T
GIMVSMSG - THERE IS A PROBABLE LOGICAL I/O ERROR.
GIM44248T
GIMVSMSG - THE RETURN CODE FOR RRLFUNCT IS UNKNOWN.
GIM44249S
GIMVSMSG - AN UNKNOWN ‘OUT OF SPACE’ ERROR HAS OCCURRED.
GIM44250I
GIMVSMSG - THE VSAM ERROR ANALYSIS OCCURRED FOR modname + offset, RRLFUNCT=‘ function ’, WITH RRLRETN=‘ rtncode ’.
GIM44250T
GIMVSMSG - THE VSAM ERROR ANALYSIS OCCURRED FOR modname + offset, RRLFUNCT=‘ function ’, WITH RRLRETN=‘ rtncode ’.
GIM44251I
GIMVSMSG - THERE IS NO AVAILABLE RRL MESSAGE TEXT.
GIM44252W
GIMVSMSG - THE REPRESENTATION WAS NOT ADDED. A DUPLICATE EXISTS.
GIM44253W
GIMVSMSG - THE REPRESENTATION DID NOT MEET THE ASSERTION CRITERIA.
GIM44253S
GIMVSMSG - THE REPRESENTATION DID NOT MEET THE ASSERTION CRITERIA.
GIM44254W
GIMVSMSG - NO REPRESENTATION WAS FOUND. THE END OF ASSERTION RANGE WAS SET USING POSITION.
GIM44255W
GIMVSMSG - THE REPRESENTATION WAS NOT DELETED. NONE EXISTED AT THE ASSERTED LEVEL.
GIM44256W
GIMVSMSG - THE REPRESENTATION WAS NOT DELETED. NONE EXISTED IN THE ASSERTION GROUP.
GIM44257S
GIMVSMSG - A DUPLICATE STRING NAME WAS PREVIOUSLY ASSIGNED, OR THE CODE VALUES HAVE ALL BEEN ATTEMPTED.
GIM44258E
GIMVSMSG - A DISCONNECT FAILED. NO PRIOR CONNECTION WAS ESTABLISHED.
GIM44259W
GIMVSMSG - THE STRING IS UNKNOWN FOR THE ENCODE PROVIDED.
GIM44260W
GIMVSMSG - THE ENCODE IS UNKNOWN FOR THE STRING PROVIDED.
GIM44261W
GIMVSMSG - ZONE zonename HAS NOT BEEN ASSIGNED.
GIM44262E
GIMVSMSG - NO ZONEINDEX EXISTS FOR THE ZONE.
GIM44263T
GIMVSMSG - THERE WAS AN ERROR DURING AN OPEN OF THE ACB.
GIM44264I
A VSAM ERROR OCCURRED IN MODULE modname. THE VSAM MACRO SHOWCB THAT REQUESTS THE vsamcb LENGTH FAILED.
GIM44264S
A VSAM ERROR OCCURRED IN MODULE modname. THE VSAM MACRO SHOWCB THAT REQUESTS THE vsamcb LENGTH FAILED.
GIM44265I
A VSAM ERROR OCCURRED IN MODULE modname. THE VSAM MACRO GENCB THAT CREATES THE vsamcb FAILED.
GIM44265S
A VSAM ERROR OCCURRED IN MODULE modname. THE VSAM MACRO GENCB THAT CREATES THE vsamcb FAILED.
GIM44267S
A VSAM ERROR OCCURRED IN MODULE modname. THE VSAM MACRO SHOWCB THAT REQUESTS THE KEY AND RECORD LENGTH OF A VSAM DATA SET FAILED.
GIM44268S
A VSAM ERROR OCCURRED IN MODULE modname. THE KEY LENGTH OF VSAM DATA SET dataset IS INVALID.
GIM44269S
A VSAM ERROR OCCURRED IN MODULE modname. THE RECORD LENGTH OF VSAM DATA SET dataset IS INVALID.
GIM44270S
A VSAM ERROR OCCURRED IN MODULE modname. command FAILED FOR VSAM DATA SET dataset.
GIM44271S
A VSAM ERROR OCCURRED IN MODULE modname. THE VSAM MACRO MODCB THAT MODIFIES THE vsamcb FAILED.
GIM44272S
A VSAM ERROR OCCURRED IN MODULE modname. THE VSAM MACRO POINT FAILED TRYING TO POSITION TO THE BEGINNING OF VSAM DATA SET dataset.
GIM44273S
A VSAM ERROR OCCURRED IN MODULE modname. A FAILURE OCCURRED TRYING TO GET THE NEXT RECORD FROM VSAM DATA SET dataset.
GIM44276I
GIMMPVIA - A VSAM OPEN GETMAIN FAILED FOR AN ACB/RPL.
GIM44279I
GIMMPVIA - VSAM OPEN FAILED. THE REASON CODE IS rsncode.
GIM44280I
GIMMPVIA - VSAM OPEN TERMINATED. A DATA SET IS EMPTY THAT REQUIRES AN INITIAL LOAD.
GIM44281I
GIMMPVIA - A VSAM OPEN SHOWCB MACRO FAILED OBTAINING INITIAL STATISTICS. THE REASON CODE IS rsncode.
GIM44282I
GIMMPVIA - A VSAM OPEN SHOWCB MACRO FAILED OBTAINING INDEX CI (CONTROL INTERVAL) SIZE. THE REASON CODE IS rsncode.
GIM44283I
GIMMPVIA - A VSAM OPEN SHOWCB MACRO FAILED OBTAINING DATA CI (CONTROL INTERVAL) SIZE. THE REASON CODE IS rsncode.
GIM44284I
GIMMPVIA - A VSAM OPEN FAILED WITH THE FOLLOWING INVALID: keyword
GIM44285I
GIMMPVIA - VSAM MACRO macroFAILED. THE RETURN CODE IS rtncode AND THE REASON CODE IS rsncode.
GIM44301E
AN UNUSUAL CONDITION OCCURRED. modname - elmtype elmname TO BE RETRANSFORMED WAS NOT IN TRANSFORMED FORMAT.
GIM44302E
AN UNUSUAL CONDITION OCCURRED. modname - elmtype elmname TO BE RETRANSFORMED IS NOT ON THE SMPWRK6 DATA SET.
GIM44304S
AN UNUSUAL CONDITION OCCURRED. modname - AN INVALID VALUE WAS SPECIFIED ON THE OPT PARAMETER PASSED TO MODULE GIMZNDEL.
GIM44305T
AN UNUSUAL CONDITION OCCURRED. modname - THE RETURN CODE FOR A UCL DEL STATEMENT INDICATED THAT NOTHING WAS DELETED. THE STATEMENT WAS CHECKED IN modname.
GIM44306E
AN UNUSUAL CONDITION OCCURRED. modname - THE RETURN CODE IS NOT ZERO FOR THE VALUE BEING CHECKED IN THE DECODE TABLE. HOWEVER, THAT VALUE WAS PREVIOUSLY ACCEPTED AS VALID BY CHKRTN PROCESSING.
GIM44307E
AN UNUSUAL CONDITION OCCURRED. modname - THE RETURN CODE IS NOT ZERO FOR THE VALUE BEING CHECKED IN THE DECODE TABLE. HOWEVER, THAT VALUE WAS PREVIOUSLY ACCEPTED AS VALID.
GIM44307T
AN UNUSUAL CONDITION OCCURRED. modname - THE RETURN CODE IS NOT ZERO FOR THE VALUE BEING CHECKED IN THE DECODE TABLE. HOWEVER, THAT VALUE WAS PREVIOUSLY ACCEPTED AS VALID.
GIM44308T
AN UNUSUAL CONDITION OCCURRED. modname - THE RETURN CODE FOR A UCL ADD STATEMENT INDICATED THAT NOTHING WAS ADDED. THE STATEMENT WAS CHECKED IN modname.
GIM44309E
AN UNUSUAL CONDITION OCCURRED. modname - AN ERROR OCCURRED IN MODULE GIMMPREC. THE MCS ENTRY WAS NOT FOUND IN A CALL TO GIMADTBL.
GIM44310I
AN UNUSUAL CONDITION OCCURRED. modname1 - GIMDSMGR WAS CALLED FROM modname2 + offset.
GIM44311T
AN UNUSUAL CONDITION OCCURRED. modname - THE FIRST PHASE PROCESSED IS NOT PHASE 1 FOR COMMAND command.
GIM44312T
AN UNUSUAL CONDITION OCCURRED. modname - THE CURRENT PHASE SHOULD HAVE PRECEDED THE PREVIOUS PHASE FOR COMMAND command.
GIM44313T
AN UNUSUAL CONDITION OCCURRED. modname - THE CLEANUP PHASE WAS NOT DONE FOR THE PREVIOUS COMMAND, command1. THE CURRENT COMMAND IS command2.
GIM44314T
AN UNUSUAL CONDITION OCCURRED. modname - SMP/E COULD NOT GET EXTRA RESOURCES FOR COMMAND command BECAUSE THEY WERE HELD WITHOUT A REASON.
GIM44315T
AN UNUSUAL CONDITION OCCURRED. modname - THE NAME OF THE DATA SET TO BE UPDATED WAS NOT PROVIDED.
GIM44316T
AN UNUSUAL CONDITION OCCURRED. modname - THE CURRENT PHASE FOR COMMAND command IS UNKNOWN.
GIM44317T
AN UNUSUAL CONDITION OCCURRED. modname - THE phase1 PHASE WAS ATTEMPTED FOR COMMAND command BEFORE THE phase2 PHASE WAS PROCESSED.
GIM44318I
AN UNUSUAL CONDITION OCCURRED. modname - SMP/E COULD NOT DETERMINE WHICH MODULE CALLED GIMDSMGR.
GIM44319S
AN UNUSUAL CONDITION OCCURRED. modname - AN ERROR HAS OCCURRED IN SUBROUTINE subroutine. AN UNKNOWN ENTRY OR SUBENTRY TYPE WAS FOUND IN A CALL TO MODULE GIMADTBL.
GIM44319T
AN UNUSUAL CONDITION OCCURRED. modname - AN ERROR HAS OCCURRED IN SUBROUTINE subroutine. AN UNKNOWN ENTRY OR SUBENTRY TYPE WAS FOUND IN A CALL TO MODULE GIMADTBL.
GIM44320E
AN UNUSUAL CONDITION OCCURRED. modname1 – AN INVALID PARAMETER WAS PASSED TO MODULE modname2.
GIM44320S
AN UNUSUAL CONDITION OCCURRED. modname - AN INVALID PARAMETER WAS PASSED TO MODULE modname.
GIM44320T
AN UNUSUAL CONDITION OCCURRED. modname - AN INVALID PARAMETER WAS PASSED TO MODULE modname.
GIM44321T
AN UNUSUAL CONDITION OCCURRED. modname - THE CALL FOR ANALYSIS SHOULD NOT HAVE BEEN MADE BECAUSE RRLRETN IS ZERO.
GIM44322S
AN UNUSUAL CONDITION OCCURRED. modname - AN ERROR HAS OCCURRED IN SUBROUTINE XRFPTF1. A RELATION ENTRY WAS NOT FOUND IN A CALL TO MODULE GIMADTBL.
GIM44323T
AN UNUSUAL CONDITION OCCURRED. modname - GIMUTTBL IS TOO SMALL – LESS THAN 10 BYTES.
GIM44324T
AN UNUSUAL CONDITION OCCURRED. modname - GIMUTTBL DOES NOT HAVE AN END-OF-LIST ENTRY.
GIM44325I
AN UNUSUAL CONDITION OCCURRED. modname - SMP/E COULD NOT ADD THE FMID OF SYSMOD sysmod TO THE GLOBAL ZONE, BECAUSE OF A VSAM ERROR.
GIM44326I
AN UNUSUAL CONDITION OCCURRED. modname - SMP/E COULD NOT FIND REGRESSED SYSMOD sysmod IN THE zonetype ZONE.
GIM44327T
AN UNUSUAL CONDITION OCCURRED. modname - action WAS ATTEMPTED FOR A NONEXISTENT ENTRY - entname.
GIM44328I
AN UNUSUAL CONDITION OCCURRED. issuer - GIMMPIO WAS CALLED FROM modname + offset WITH IOPFUNCT = iopfunct, IOPTYPE = enttype AND IOPNAME = entname.
GIM44329E
AN UNUSUAL CONDITION OCCURRED. modname - LMOD ENTRY entname HAS NO VALID SYSLIB VALUE.
GIM44330T
AN UNUSUAL CONDITION OCCURRED. modname - A RECORD IN THE enttype ENTRY CONTAINS AN UNKNOWN RELATIONSHIP. THE KEY OF THE RECORD IS key.
GIM44331W
AN UNUSUAL CONDITION OCCURRED. modname - SYSMOD sysmod COULD NOT BE FOUND IN THE zonetype ZONE.
GIM44332T
AN UNUSUAL CONDITION OCCURRED. modname1 - modname2 WAS CALLED FROM modname3 DURING command COMMAND PROCESSING.
GIM44333T
AN UNUSUAL CONDITION OCCURRED. THE function FUNCTION CANNOT BE PROCESSED BECAUSE THE ddname DD SPECIFIES A PATH.
GIM44334S
AN UNUSUAL CONDITION OCCURRED. MODULE GIMZNDEL HAD A REQUEST TO DELETE THE GLOBAL ZONE FROM A COMMAND OTHER THAN ZONEIMPORT.
GIM44335E
operation FAILED FOR elmtype elmname IN SYSMOD sysmod. THE RETURN CODE FROM THE operation OPERATION WAS rtncode.
GIM44336I
AN UNUSUAL CONDITION OCCURRED. routine - text
GIM44336S
AN UNUSUAL CONDITION OCCURRED. routine - text
GIM44401W
asmname WAS NOT ASSEMBLED FOR enttype entname IN SYSMOD sysmod BECAUSE SMP/E COULD NOT FIND ASSEMBLER INPUT FOR asmname.
GIM44402W
asmname WAS NOT ASSEMBLED FOR enttype entname IN SYSMOD sysmod BECAUSE THERE IS NO MOD ENTRY FOR asmname. SMP/E CANNOT DETERMINE THE TARGET LIBRARY FOR THE ASSEMBLER OUTPUT.
GIM44500I
VERIFICATION OF HASH VALUE OF FILE filename FAILED. SMP/E WILL RETRY RETRIEVAL OF THE FILE.
GIM44501W
CHANGES FOR THE FOLLOWING USERMODS OR APAR FIXES WILL BE LOST BECAUSE SYSMOD sysmod IS BEING INSTALLED.
GIM44502W
CHANGES FOR THE FOLLOWING USERMODS WILL BE LOST BECAUSE THE ASSOCIATED FUNCTION SYSMOD HAS BEEN DELETED.
GIM44601I
smdtype sysmod IN elmtype elmname.
GIM44701I
MODULE modname IN SYSMOD sysmod WAS NOT REASSEMBLED BECAUSE THE REUSE OPERAND WAS SPECIFIED. THE OBJECT MODULE SAVED IN SMPWRK3 WAS USED INSTEAD.
GIM44801I
modname WAS ASSEMBLED BECAUSE THE ASSEMBLE SUBENTRY WAS SET IN THE MOD ENTRY.
GIM44802I
MODULE modname WAS ASSEMBLED BECAUSE ITS NAME MATCHES THE PREFIX VALUE ON A ++MAC OR ++MACUPD STATEMENT.
GIM44803I
MODULE modname WAS ASSEMBLED BECAUSE IT WAS INCLUDED IN A LOAD MODULE DURING LOAD MODULE BUILD PROCESSING.
GIM44804I
MODULE modname IS ASSEMBLED BECAUSE IT IS NEEDED TO COMPLETE LOAD MODULE loadmod.
GIM44901W
SMP/E ADDED THE subname SUBENTRY TO CREATE A VALID ENTRY.
GIM45001I
AN I/O ERROR OCCURRED FOR enttype entname ON THE library LIBRARY.
GIM45101I
LOG RECORDING WAS SWITCHED TO dataset1 BECAUSE dataset2 IS FULL.
GIM45200I
ftpcmd
GIM45201I
ftpreply
GIM45201S
ftpreply
GIM45301E
DATA IS MISSING FROM THE ++mcstype FOR SYSMOD sysmod. data IS REQUIRED.
GIM45302E
DATA IS MISSING FROM THE ++mcstype MCS FOR mcsname. operand IS REQUIRED.
GIM45401W
elmtype elmname IN SYSMOD sysmod WAS NOT PROCESSED BECAUSE THE FMID ON THE ++VER STATEMENT DOES NOT MATCH THE FMID IN THE enttype ELEMENT ENTRY.
GIM45500S
VERIFICATION OF HASH VALUE OF FILE filename FAILED. SMP/E WILL NOT RETRY FILE RETRIEVAL.
GIM45601W
THE SMPTLIB DDDEF VOLUME SUBENTRY subname1 WAS NOT UPDATED BECAUSE VOLUME SUBENTRY subname2 ALREADY EXISTS IN THE VOLUME LIST.
GIM45700S
SMP/E COULD NOT RESOLVE SERVER HOST NAME hostname TO AN IP ADDRESS.
GIM45800S
PACKAGE package WAS NOT FOUND IN THE SMPNTS.
GIM45900S
PACKAGE package DOES NOT CONTAIN datatype DATA.
GIM46000S
AN ERROR OCCURRED WHILE SMP/E WAS EXPLODING MEMBER member IN THE ARCHIVE FILE filename FROM PACKAGE package.
GIM46100I
PACKAGE package HAS BEEN DELETED FROM THE SMPNTS.
GIM46200I
command PROCESSING HAS FAILED BECAUSE THERE WAS AN FTP ERROR.
GIM46200S
command PROCESSING HAS FAILED BECAUSE THERE WAS AN FTP ERROR.
GIM46300I
elmtype elmname HAS BEEN COPIED INTO pathname.
GIM46400S
NO LMODS SATISFIED THE OPERANDS SPECIFIED ON THE LINK LMODS COMMAND.
GIM46500E
LINK PROCESSING FAILED FOR LMOD loadmod BECAUSE SYSLIB ddname COULD NOT BE ALLOCATED.
GIM46600S
THE CALLLIBS OPERAND IS REQUIRED WHEN THE LMODS OPERAND IS SPECIFIED WITHOUT ANY VALUES.
GIM46700I
progname PACKAGE CONTROL STATEMENT PROCESSING FAILED.
GIM46701I
PROCESSING HAS FAILED FOR THE dataset DATA SET ALLOCATED TO THE ddname DDNAME.
GIM46702I
PROCESSING HAS FAILED FOR THE FILE ATTRIBUTE FILE IN ARCHIVE archive.
GIM46703I
PROCESSING HAS FAILED FOR PACKAGE ATTRIBUTE FILE filename.
GIM46800I
outfile WAS EXTRACTED FROM ARCHIVE archive.
GIM46900I
AN ERROR OCCURRED WHILE SMP/E WAS COPYING elmtype elmname INTO pathname.
GIM46901I
AN ERROR OCCURRED WHILE SMP/E WAS COPYING elmtype elmname INTO LIBRARY ddname.
GIM47000T
progname PROCESSING IS TERMINATED. THE dataset DATA SET CANNOT BE OPENED.
GIM47100S
progname PROCESSING FAILED BECAUSE IT WAS UNABLE TO OBTAIN THE REQUIRED FILE ATTRIBUTES FOR infile.
GIM47200I
FILES HAVE BEEN EXTRACTED FROM elmtype elmname INTO DIRECTORY directory. SEQUENCE NUMBER seqno.
GIM47300E
AN ERROR OCCURRED WHILE SMP/E WAS EXTRACTING FILES FROM elmtype elmname IN FILE pathname SEQUENCE NUMBER seqno.
GIM47301E
SMP/E COULD NOT UPDATE etype ename BECAUSE THE JAVA RUNTIME LOCATION (THE JAVA HOME DIRECTORY) IS NOT DEFINED.
GIM47400S
THE ddname DD STATEMENT MUST BE ALLOCATED TO A DIRECTORY.
GIM47500I
ARCHIVE PROCESSING IS COMPLETE FOR infile.
GIM47501I
infile WAS COPIED INTO outfile.
GIM47502I
DATA SET dsname WAS ARCHIVED INTO directory AS SEGMENT FILES.
GIM47600I
PACKAGE package WAS SUCCESSFULLY STAGED TO THE SMPNTS.
GIM47601I
PACKAGE package WAS PARTIALLY STAGED TO THE SMPNTS.
GIM47700S
PACKAGE package ALREADY EXISTS IN THE SMPNTS.
GIM47800S
AN ERROR OCCURRED WHILE progname WAS PROCESSING ARCHIVE archive.
GIM47801S
AN ERROR OCCURRED WHILE COPYING infile INTO outfile.
GIM47802S
AN ERROR OCCURRED WHILE USING program TO COPY DATA FROM dataset TO outfile.
GIM47803S
program PROCESSING FAILED FOR DATA SET dataset.
GIM47900S
REQUIRED COMPONENT FILE filename WAS NOT FOUND IN ARCHIVE archive.
GIM48000S
THE keyword KEYWORD HAS BEEN SPECIFIED MORE THAN ONCE ON A tag TAG IN THE dataset DATA SET.
GIM48100S
GIMZIP PROCESSING FAILED. infile IS NOT VALID FOR THE SPECIFIED FILE TYPE OF 'filetype'.
GIM48101I
THE attribute ATTRIBUTE WAS IGNORED BY routine WHEN PROCESSING name.
GIM48200W
command PROCESSING WAS NOT ABLE TO REMOVE THE pathname DIRECTORY.
GIM48200S
progname PROCESSING WAS NOT ABLE TO REMOVE THE directory DIRECTORY.
GIM48201W
command PROCESSING WAS NOT ABLE TO REMOVE THE pathname DIRECTORY. SEQUENCE NUMBER seqno.
GIM48300S
enttype entname COULD NOT BE SAVED IN THE library LIBRARY BECAUSE IT RAN OUT OF SPACE.
GIM48400S
enttype entname COULD NOT BE SAVED BECAUSE THE SMPPTS AND ALL OF ITS SPILL DATA SETS RAN OUT OF SPACE.
GIM48500I
THE oldlib LIBRARY RAN OUT OF SPACE. SMP/E WILL INSTEAD ATTEMPT TO STORE enttype entname IN THE newlib LIBRARY.
GIM48600S
THE DIRECTORY ASSOCIATED WITH THE SMPDIR DD STATEMENT (directory) MUST BE EMPTY FOR GIMZIP PROCESSING TO CONTINUE.
GIM48700S
THE subdir ATTRIBUTE CANNOT BE SPECIFIED WITH A FILE TYPE OF 'filetype'.
GIM48750S
THE subdir ATTRIBUTE VALUE CANNOT START WITH 'SMP'.
GIM48800I
DIRECTORY SPACE FOR THE oldlib LIBRARY WAS EXCEEDED DURING AN ATTEMPT TO STORE enttype ENTRY entname. SMP/E WILL INSTEAD ATTEMPT TO STORE enttype entname IN THE newlib LIBRARY.
GIM48900S
THE PACKAGE ATTRIBUTE FILE DOES NOT CONTAIN AN ENTRY FOR REQUIRED ARCHIVE archive.
GIM49000S
progname COULD NOT LOCATE THE REQUIRED PACKAGE ATTRIBUTE FILE 'filename' WITHIN THE DIRECTORY NAMED ON THE ddname DD STATEMENT.
GIM49001S
filetype name COULD NOT BE FOUND WITHIN THE DIRECTORY NAMED ON THE ddname DD STATEMENT.
GIM49002S
command COMMAND PROCESSING HAS FAILED. SMP/E COULD NOT LOCATE THE REQUIRED PACKAGE ATTRIBUTE FILE filename WITHIN THE package-id PACKAGE.
GIM49010S
filetype FILE filename COULD NOT BE FOUND WITHIN THE package-id PACKAGE.
GIM49011S
AN ERROR OCCURRED WHILE CREATING ARCHIVE FILE filename FROM ITS SEGMENTS.
GIM49100S
VERIFICATION OF THE HASH VALUE FAILED FOR FILE name.
GIM49200S
DATA SET dataset IS EMPTY. AN EMPTY DATA SET CANNOT BE PART OF A PACKAGE.
GIM49300I
FILE pathname HAS BEEN UPDATED WITH elmtype elmname FROM SYSMOD sysmod. SEQUENCE NUMBER seqno.
GIM49400E
UPDATE PROCESSING FAILED FOR elmtype elmname IN FILE pathname. SEQUENCE NUMBER seqno.
GIM49500I
pathname HAS BEEN DELETED.
GIM49600I
AN ERROR OCCURRED WHILE SMP/E WAS DELETING pathname.
GIM49700I
HFSCOPY PROCESSING TO THE ddname LIBRARY WAS SUCCESSFUL FOR elmtype elmname. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM49700W
HFSCOPY PROCESSING TO THE ddname LIBRARY WAS SUCCESSFUL FOR elmtype elmname. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM49800I
UPDATE PROCESSING FOR SYSMOD sysmod WAS SUCCESSFUL FOR elmtype elmname IN THE ddname LIBRARY. DATE yy.ddd- TIME hh:mm:ss.
GIM49900E
HFSCOPY PROCESSING TO THE ddname LIBRARY FAILED FOR elmtype elmname. THE RETURN CODE (rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM50001E
THERE IS AN ERROR IN systype SYSMOD sysmod.
GIM50002E
THERE IS AN ERROR IN AN UNKNOWN TYPE OF SYSMOD sysmod.
GIM50003E
THERE IS AN ERROR IN A ++mcstype MCS FOR ELEMENT elmname IN systype SYSMOD sysmod.
GIM50004E
THERE IS AN ERROR IN AN UNKNOWN MCS FOR systype SYSMOD sysmod.
GIM50005E
THERE IS AN ERROR IN A ++mcstype MCS FOR AN UNKNOWN ELEMENT IN systype SYSMOD sysmod.
GIM50006E
THERE IS AN ERROR IN A ++IF MCS ASSOCIATED WITH ++VER MCS number IN systype SYSMOD sysmod.
GIM50007E
THERE IS AN ERROR IN ++VER MCS number IN systype SYSMOD sysmod.
GIM50008E
THERE IS AN ERROR IN A ++mcstype MCS FOR systype SYSMOD sysmod.
GIM50050I
command PROCESSING FOR SYSMOD sysmod ENCOUNTERED THE DESCRIPTION OPERAND ON THE HEADER MCS. THIS OPERAND IS IGNORED SINCE IT IS SUPPORTED ONLY BY OS/390 R7 SMP/E OR HIGHER.
GIM50051W
command PROCESSING ENCOUNTERED A ++mcstype MCS. THIS MCS IS IGNORED SINCE IT IS SUPPORTED ONLY BY OS/390 RELEASE 7 SMP/E, OR HIGHER.
GIM50052E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE IT CONTAINS THE ++mcstype MCS. THIS MCS IS ONLY SUPPORTED BY SMP/E VERSION ver RELEASE rel OR HIGHER.
GIM50053E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE THE ++mcstype FOR ELEMENT elmname CONTAINS THE operand OPERAND. THIS OPERAND IS SUPPORTED ONLY BY OS/390 RELEASE 7 SMP/E, OR HIGHER.
GIM50101S
operand1 IS NOT ALLOWED BECAUSE operand2 WAS NOT SPECIFIED.
GIM50201E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE operand WAS NOT SPECIFIED.
GIM50202E
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE IT HAS ALREADY BEEN INSTALLED.
GIM50301S
value WAS NOT PROCESSED BECAUSE IT IS NOT AN FMIDSET DEFINED IN THE GLOBAL ZONE.
GIM50302E
value WAS NOT PROCESSED BECAUSE IT IS NOT AN FMIDSET DEFINED IN THE GLOBALZONE CONTAINED IN THE CSI SPECIFIED ON THE FROMCSI OPERAND.
GIM50401T
THE CSI PARAMETER IS NOT ALLOWED ON THE GIMSMP EXEC STATEMENT BECAUSE THE SMPCSI DD STATEMENT IS SPECIFIED.
GIM50501E
CONNECT PROCESSING FAILED FOR THE zonename ZONE.
GIM50501S
CONNECT PROCESSING FAILED FOR THE zonename ZONE.
GIM50501T
CONNECT PROCESSING FAILED FOR THE zonename ZONE.
GIM50502E
FREE PROCESSING FAILED FOR THE zonename ZONE.
GIM50502T
FREE PROCESSING FAILED FOR THE zonename ZONE.
GIM50504W
OPEN PROCESSING FAILED FOR THE zonename ZONE.
GIM50504E
OPEN PROCESSING FAILED FOR THE zonename ZONE.
GIM50504S
OPEN PROCESSING FAILED FOR THE zonename ZONE.
GIM50504T
OPEN PROCESSING FAILED FOR THE zonename ZONE.
GIM50505S
CLOSE PROCESSING FAILED FOR THE zonename ZONE.
GIM50505T
CLOSE PROCESSING FAILED FOR THE zonename ZONE.
GIM50506E
LMOD BUILD PROCESSING WAS UNSUCCESSFUL BECAUSE OPEN PROCESSING FAILED FOR DISTRIBUTION ZONE zonename.
GIM50507T
SMP/E CANNOT PROCESS ZONE zonename BECAUSE THE SMPCSI DATA SET CONTAINS TOO MANY ZONES.
GIM50508E
command PROCESSING FAILED.
GIM50508T
command PROCESSING FAILED.
GIM50509T
AN I/O ERROR OCCURRED WHEN SMP/E WAS TRYING TO LOCATE A RECORD FOR ZONE zonename.
GIM50601E
LINK-EDIT PROCESSING FAILED FOR LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATEyy.ddd— TIME hh:mm:ss — SEQUENCE NUMBER seqno — DELETION WAS ATTEMPTED FOR THE FOLLOWING CSECTS:
GIM50602I
LINK-EDIT PROCESSING WAS SUCCESSFUL FOR LMOD loadmod IN THE library LIBRARY. THE RETURN CODE WAS rtncode. DATEyy.ddd— TIME hh:mm:ss — SEQUENCE NUMBER seqno — THE FOLLOWING CSECTS HAVE BEEN DELETED:
GIM50603E
LINK-EDIT PROCESSING FAILED FOR LMOD loadmod IN THE library LIBRARY. ABEND abncode OCCURRED WHILE PROCESSINGlibrary. THE library LIBRARY RAN OUT OF SPACE. DATE yy.ddd— TIME hh:mm:ss — SEQUENCE NUMBER seqno — DELETION WAS ATTEMPTED FOR THE FOLLOWING CSECTS:
GIM50701I
CSECT csect IN DLIB MODULE modname IN SYSMOD sysmod.
GIM50801W
ZONE zonename WAS NOT USED BECAUSE IT IS NOT DEFINED BY A ZONEINDEX SUBENTRY IN THE GLOBAL ZONE.
GIM50801E
ZONE zonename WAS NOT USED BECAUSE IT IS NOT DEFINED BY A ZONEINDEX SUBENTRY IN THE GLOBAL ZONE.
GIM50801S
ZONE zonename WAS NOT USED BECAUSE IT IS NOT DEFINED BY A ZONEINDEX SUBENTRY IN THE GLOBAL ZONE.
GIM50802E
LOAD MODULE BUILD PROCESSING STOPPED BECAUSE DISTRIBUTION ZONE zonename IS NOT DEFINED BY A ZONEINDEX SUBENTRY IN THE GLOBAL ZONE.
GIM50803I
A NULL LIST WAS SPECIFIED FOR THE XZGROUP OPERAND. NO CROSS-ZONE REQUISITE CHECKING WILL BE DONE.
GIM50804S
program PROCESSING FAILED BECAUSE ZONE name IS NOT DEFINED BY A ZONEINDEX SUBENTRY IN THE GLOBAL ZONE IN data set.
GIM50805S
program PROCESSING FAILED BECAUSE ZONE name IN data set IS NOT A TARGET ZONE.
GIM50806W
NO ZONES WERE APPLICABLE FOR CROSS-ZONE REQUISITE CHECKING FOR THE command COMMAND.
GIM50808I
zonetype ZONE zonename WILL BE USED FOR CROSS-ZONE REQUISITE CHECKING.
GIM50809S
XZGROUP MAY NOT BE SPECIFIED AS A NULL LIST IF THE XZREQ OPERAND IS ALSO SPECIFIED.
GIM50810W
THE XZREQ OPERAND WAS SPECIFIED ON THE command COMMAND BUT SINCE NO ZONES WERE APPLICABLE FOR CROSS-ZONE REQUISITE CHECKING, THE XZREQ OPERAND WILL BE IGNORED.
GIM50811E
LOAD MODULE BUILD PROCESSING STOPPED BECAUSE THERE IS NO ZONE DEFINITION ENTRY FOR RELATED ZONE zonename.
GIM50811S
LOAD MODULE BUILD PROCESSING STOPPED BECAUSE THERE IS NO ZONE DEFINITION ENTRY FOR RELATED ZONE zonename.
GIM50812E
LOAD MODULE BUILD PROCESSING STOPPED BECAUSE THE RELATED ZONE zonename IS NOT A DLIB ZONE.
GIM50812S
LOAD MODULE BUILD PROCESSING STOPPED BECAUSE THE RELATED ZONE zonename IS NOT A DLIB ZONE.
GIM50901S
A SET COMMAND IS REQUIRED BEFORE THE command COMMAND.
GIM50902S
SET COMMAND PROCESSING FAILED. DATA IN SMPCNTL UP TO THE NEXT SET COMMAND WILL ONLY BE SYNTAX-CHECKED.
GIM50903I
PROCESSING FOR THE member MEMBER IN THE SMPPARM DATA SET HAS FAILED.
GIM50904S
ALLOCATION FAILED FOR DATA SET dataset SPECIFIED ON A GIMEXITS CONTROL STATEMENT.
GIM50905S
EXIT ROUTINE exitname SPECIFIED ON A GIMEXITS CONTROL STATEMENT WAS NOT FOUND.
GIM51001E
THE subtype SUBENTRY IS NOT IN enttype ENTRY entname.
GIM51001I
THE subtype SUBENTRY IS NOT IN enttype ENTRY entname.
GIM51101S
SMP/E PROCESSING STOPPED BECAUSE IT COULD NOT DETERMINE WHICH ZONE TO UPDATE FOR UCLIN PROCESSING.
GIM51201E
THE SPECIFIED ENTRY TYPE IS ONLY ALLOWED FOR A zonetype ZONE.
GIM51202S
THE UTILITY OPERAND IS ONLY ALLOWED FOR THE GLOBAL ZONE.
GIM51301E
THE operand OPERAND EXCEEDS THE 26-CHARACTER MAXIMUM.
GIM51301S
THE operand OPERAND EXCEEDS THE 26-CHARACTER MAXIMUM.
GIM51401W
THERE IS NO enttype ENTRY FOR entname.
GIM51401S
THERE IS NO enttype ENTRY FOR entname.
GIM51501I
enttype entname WAS MOVED TO A NEW DISTLIB AND DELETED FROM DISTLIB distlib.
GIM51601S
THE command COMMAND WAS NOT PROCESSED BECAUSE THE SET COMMAND SPECIFIED A zonetype ZONE.
GIM51602S
THE command COMMAND DID NOT PROCESS THE GLOBAL ZONE BECAUSE THE SET COMMAND SPECIFIED A zonetype ZONE.
GIM51603S
THE command COMMAND WAS NOT PROCESSED BECAUSE OF A CONFLICT IN ZONE TYPES. THE SET COMMAND SPECIFIED A zonetype1 ZONE, BUT THE INPUT ZONE IS A zonetype2 ZONE.
GIM51605E
value WAS NOT PROCESSED BECAUSE value IS NOT DEFINED AS AN FMID SUBENTRY IN THE GLOBALZONE ENTRY IN THE GLOBAL ZONE CONTAINED IN THE CSI SPECIFIED ON THE FROMCSI OPERAND.
GIM51606S
THE DATA SET NAME SPECIFIED ON THE FROMCSI OPERAND CANNOT BE THE SAME AS THE DATA SET CONTAINING THE DESTINATION GLOBAL ZONE.
GIM51607S
THE FROMCSI OPERAND IS REQUIRED ON THE GZONEMERGE COMMAND.
GIM51608S
THE ORIGINATING SMPPTS DATA SET CANNOT BE ALLOCATED FOR GZONEMERGE PROCESSING. THERE IS NO DDDEF ENTRY FOR SMPPTS DEFINED IN THE GLOBAL ZONE IN CSI fromcsi_value.
GIM51609S
THE ORIGINATING SMPPTS DATA SET AND ANY ORIGINATING SMPPTS SPILL DATA SETS MUST BE DIFFERENT FROM THE DESTINATION SMPPTS DATA SET AND ANY DESTINATION SMPPTS SPILL DATA SETS.
GIM51610S
ALLOCATION FAILED FOR THE ORIGINATING dddef DATA SET. THE DATA SET DEFINED USING DDDEF dddef IN THE ORIGINATING GLOBAL ZONE IN CSI csiname COULD NOT BE ALLOCATED.
GIM51611S
ALLOCATION FAILED FOR THE DATA SET dataset SPECIFIED ON THE operand OPERAND
GIM51701S
THE command COMMAND WAS NOT PROCESSED BECAUSE NO SREL WAS SPECIFIED IN THE ZONE DEFINITION ENTRY.
GIM51702E
THE command COMMAND WAS NOT PROCESSED BECAUSE NO RELATED ZONE WAS SPECIFIED IN THE ZONE DEFINITION ENTRY.
GIM51702S
THE command COMMAND WAS NOT PROCESSED BECAUSE NO RELATED ZONE WAS SPECIFIED IN THE ZONE DEFINITION ENTRY.
GIM51703E
THE command COMMAND WAS NOT PROCESSED BECAUSE NO zonetype ZONE WAS SPECIFIED ON THE operand OPERAND.
GIM51801W
ZONE zonename IS DEFINED AS A zonetype1 ZONE IN THE ZONEINDEX SUBENTRY. THIS CONFLICTS WITH THE ZONE TYPE OF zonetype2.
GIM51801S
ZONE zonename IS DEFINED AS A zonetype1 ZONE IN THE ZONEINDEX SUBENTRY. THIS CONFLICTS WITH THE ZONE TYPE OF zonetype2.
GIM51901E
A ++mcstype MCS IS NOT ALLOWED WITHIN A SYSMOD.
GIM52001E
SYSMOD sysmod1 CONTAINS A ++HOLD MCS WHICH SPECIFIES SYSMOD sysmod2. SYSMOD sysmod2 IS NOT SUPERSEDED BY sysmod1.
GIM52101E
THE ++mcstype MCS SPECIFIES MORE THAN ONE HOLD CATEGORY. THIS IS NOT ALLOWED.
GIM52200I
AN ERROR OCCURRED WHILE SMP/E WAS CREATING pathname.
GIM52301E
THE command COMMAND SPECIFIES OPERANDS THAT ARE NOT ALLOWED FOR THE ZONE SPECIFIED ON THE SET COMMAND.
GIM52401I
UCLIN PROCESSING IS COMPLETE FOR zonetype ZONE zonename.
GIM52402I
UCLIN PROCESSING IS COMPLETE FOR THE GLOBAL ZONE.
GIM52501W
A PERIOD IS MISSING AFTER THE LAST command COMMAND. ONE IS ASSUMED.
GIM52601E
THE UCL STATEMENT AND THE SET COMMAND REFER TO DIFFERENT ZONE NAMES. THE ZONE NAMES MUST BE THE SAME.
GIM52602E
THE UCL STATEMENT AND THE SET COMMAND REFER TO DIFFERENT ZONE TYPES. THE ZONE TYPES MUST BE THE SAME.
GIM52701E
THE DSNAME EXCEEDS THE 44-CHARACTER MAXIMUM.
GIM52701S
THE DSNAME EXCEEDS THE 44-CHARACTER MAXIMUM.
GIM52702I
THE CSI PARAMETER ON THE GIMSMP EXEC STATEMENT SPECIFIES A DATA SET NAME THAT EXCEEDS THE 44-CHARACTER MAXIMUM.
GIM52703S
PATHNAME pathname TO BE DYNAMICALLY ALLOCATED TO DDNAME ddname EXCEEDS THE 255-CHARACTER MAXIMUM.
GIM52801E
THE LOW-LEVEL QUALIFIER OF THE SMPCSI DATA SET NAME MUST BE CSI.
GIM52801S
THE LOW-LEVEL QUALIFIER OF THE SMPCSI DATA SET NAME MUST BE CSI.
GIM52801T
THE LOW-LEVEL QUALIFIER OF THE SMPCSI DATA SET NAME MUST BE CSI.
GIM52901E
THE UCL DEL STATEMENT CANNOT DELETE ZONES. USE THE ZONEDELETE COMMAND INSTEAD.
GIM53201E
A SPECIFIED OPERAND IS NOT ALLOWED FOR THE GLOBAL ZONE.
GIM53300E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE NONE OF THE MODULES INCLUDED IN loadmod HAVE BEEN INSTALLED.
GIM53300W
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE NONE OF THE MODULES INCLUDED IN loadmod HAVE BEEN INSTALLED.
GIM53901E
THE LIST NOACCEPT COMMAND MUST SPECIFY A DLIB ZONE. THE LIST NOAPPLY COMMAND MUST SPECIFY A TARGET ZONE.
GIM54001E
type REASON IDS ARE NOT ALLOWED ON A ++HOLD MCS WITHIN A SYSMOD.
GIM54002E
A USER REASON ID IS NOT ALLOWED ON A ++HOLD MCS WITHIN A SYSMOD.
GIM54101I
DYNAMIC ALLOCATION FOR library WAS SUCCESSFUL – parameters
GIM54201I
DYNAMIC ALLOCATION FOR library1 WAS SUCCESSFUL. THE FOLLOWING LIBRARIES WERE CONCATENATED: ddname,…,ddname.
GIM54301I
DYNAMIC DEALLOCATION WAS SUCCESSFUL FOR library.
GIM54401W
DYNAMIC DEALLOCATION FAILED FOR dataset.
GIM54501I
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN THE GLOBAL ZONE.
GIM54501W
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN THE GLOBAL ZONE.
GIM54501E
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN THE GLOBAL ZONE.
GIM54501S
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN THE GLOBAL ZONE.
GIM54501T
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN THE GLOBAL ZONE.
GIM54502I
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN zonetype ZONE zonename.
GIM54502W
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN zonetype ZONE zonename.
GIM54502E
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN zonetype ZONE zonename.
GIM54502S
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN zonetype ZONE zonename.
GIM54502T
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT IN THE JCL AND NO DDDEF ENTRY IN zonetype ZONE zonename.
GIM54601I
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE library2 IS PART OF THE library1 CONCATENATION BUT WAS NOT ALLOCATED.
GIM54601W
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE library2 IS PART OF THE library1 CONCATENATION BUT WAS NOT ALLOCATED.
GIM54601E
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE library2 IS PART OF THE library1 CONCATENATION BUT WAS NOT ALLOCATED.
GIM54601S
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE library2 IS PART OF THE library1 CONCATENATION BUT WAS NOT ALLOCATED.
GIM54601T
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE library2 IS PART OF THE library1 CONCATENATION BUT WAS NOT ALLOCATED.
GIM54701I
svc99fn FAILED FOR library – errmsg.
GIM54701W
svc99fn FAILED FOR library – errmsg.
GIM54701E
svc99fn FAILED FOR library – errmsg.
GIM54701S
svc99fn FAILED FOR library – errmsg.
GIM54701T
svc99fn FAILED FOR library – errmsg.
GIM54801I
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM54801W
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM54801E
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM54801S
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM54801T
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM54901I
library WAS ALLOCATED BY THE USER AS SYSIN/SYSOUT.
GIM54902I
library WAS ALLOCATED BY THE USER AS A DUMMY DATA SET.
GIM54902S
library WAS ALLOCATED BY THE USER AS A DUMMY DATA SET.
GIM54903I
library WAS ALLOCATED BY THE USER – parameters
GIM55000E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE THE ddname LIBRARY IS OUT OF SPACE.
GIM55101I
ZONE zonename WAS SUCCESSFULLY DELETED.
GIM55201I
THE ZONEINDEX SUBENTRY FOR zonename WAS DELETED.
GIM55202W
THE ZONEINDEX SUBENTRY FOR zonename WAS NOT DELETED. SMP/E COULD NOT OBTAIN ACCESS TO THE GLOBAL ZONE.
GIM55301W
SMP/E COULD NOT ALLOCATE THE SMPPARM DATA SET TO CHECK FOR OPCODE VALUES. SMP/E USED THE DEFAULT SET OF OPCODE DEFINITIONS.
GIM55401W
MEMBER member IS NOT IN THE SMPPARM DATA SET. SMP/E USED THE DEFAULT SET OF OPCODE DEFINITIONS.
GIM55402W
MEMBER member IS NOT IN THE SMPPARM DATA SET. SMP/E USED ONLY THE OPCODES IN THE GIMOPCDE MEMBER.
GIM55503I
charstr FOUND IN ASSEMBLY asmname INPUT IS CONSIDERED A MACRO BECAUSE IT IS NOT A DEFINED OPCODE.
GIM55601I
dataset WAS NOT DEFINED. PROCESSING CONTINUES USING SYSPRINT INSTEAD.
GIM55801S
THE command COMMAND SPECIFIED THE ZONE NAME zonename. THIS DOES NOT MATCH THE ZONE SPECIFIED ON THE PREVIOUS SET COMMAND.
GIM55802S
THE command COMMAND SPECIFIED A zonetype ZONE. THIS CONFLICTS WITH THE ZONE TYPE OF THE ZONE SPECIFIED ON THE PREVIOUS SET COMMAND.
GIM55901E
THE CONCAT OPERAND IS MUTUALLY EXCLUSIVE WITH ALL OTHER DDDEF ENTRY OPERANDS.
GIM56001E
SMP/E DOES NOT ALLOW MORE THAN 123 DDDEFS ON THE CONCAT OPERAND.
GIM56101S
A ZONE SPECIFIED ON THE operand OPERAND MUST BE A zonetype1 ZONE. zonename IS A zonetype2 ZONE.
GIM56200S
SEGMENTED ARCHIVE FILES HAVE BEEN FOUND IN THE DIRECTORY NAMED ON THE ddname DD STATEMENT. SEGMENTED ARCHIVE FILES ARE SUPPORTED ONLY BY SMP/E VERSION 3 RELEASE 2 OR HIGHER.
GIM56301E
RELATED ZONE zonename MUST BE A zonetype ZONE.
GIM56301S
RELATED ZONE zonename MUST BE A zonetype ZONE.
GIM56401S
name HAS ALREADY BEEN SPECIFIED ON EITHER THE SELECT OR EXCLUDE OPERAND.
GIM56402E
SYSMOD sysmod WAS SPECIFIED MORE THAN ONCE ON A ++ASSIGN MCS. THIS IS NOT ALLOWED.
GIM56403S
SYSMOD ID sysmod HAS ALREADY BEEN SPECIFIED FOR THE reasonid REASON ID ON THE HOLDSYSTEM BYPASS OPTION.
GIM56404S
value HAS ALREADY BEEN SPECIFIED ON THE option BYPASS OPTION.
GIM56405S
ZONE zonename HAS ALREADY BEEN SPECIFIED FOR THE sysmod SYSMOD ID ON THE XZIFREQ BYPASS OPTION.
GIM56501I
THE subtype SUBENTRY WAS ADDED INSTEAD OF REPLACED BECAUSE IT DID NOT EXIST.
GIM566I
JOB jobname HAS BEEN WAITING mm MINUTES FOR PACKAGE ID RESOURCE package.
GIM56601E
ENTRY entname WAS NOT ADDED BECAUSE IT ALREADY EXISTS.
GIM56701E
THERE IS AN ERROR IN A ++mcstype MCS FOR SYSMOD sysmod IN SMPHOLD.
GIM56702E
THERE IS AN ERROR IN A ++mcstype MCS IN SMPHOLD. THE SYSMOD IS UNKNOWN.
GIM56703E
THERE IS AN ERROR IN A ++NULL MCS IN SMPHOLD.
GIM56704E
THERE IS AN ERROR IN AN UNKNOWN MCS IN SMPHOLD.
GIM56801E
A SUBENTRY VALUE WAS SPECIFIED MORE THAN ONCE FOR THE subtype SUBENTRY. THIS IS NOT ALLOWED.
GIM56901S
A UCL STATEMENT FOR THE ZONEINDEX SUBENTRY CONTAINS AN ERROR. THE REMAINING UCL STATEMENTS UP TO THE ENDUCL COMMAND WERE NOT PROCESSED.
GIM57001E
THE PARM SUBENTRY EXCEEDS THE 100-CHARACTER MAXIMUM.
GIM57001T
THE PARM SUBENTRY EXCEEDS THE 100-CHARACTER MAXIMUM.
GIM57101E
CONCAT IS NOT ALLOWED WHEN OTHER SUBENTRIES ALREADY EXIST IN THE DDDEF ENTRY.
GIM57201E
OTHER SUBENTRIES ARE NOT ALLOWED WHEN CONCAT ALREADY EXISTS IN THE DDDEF ENTRY.
GIM57301E
THE UCL STATEMENT FOR THE enttype ENTRY MUST CONTAIN AT LEAST ONE SUBENTRY OPERAND.
GIM57302S
THE GIMDDALC CONTROL STATEMENT FOR THE dataset DATA SET MUST CONTAIN AT LEAST ONE OPERAND.
GIM57303S
THE GIMDDALC CONTROL STATEMENT FOR THE dataset DATA SET HAS ALREADY BEEN FOUND. ONLY ONE GIMDDALC CONTROL STATEMENT IS ALLOWED FOR EACH DATA SET.
GIM57304S
THE GIMEXITS CONTROL STATEMENT FOR THE exitpnt EXIT POINT HAS ALREADY BEEN FOUND. ONLY ONE GIMEXITS CONTROL STATEMENT IS ALLOWED FOR EACH EXIT POINT.
GIM57501E
THE BACKUP OPERAND IS NOT ALLOWED WITH OTHER LIST OPERANDS.
GIM57601I
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE IT CONCATENATES THE library2 DDDEF ENTRY, WHICH CONCATENATES OTHER DATA SETS. THIS IS NOT ALLOWED.
GIM57601W
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE IT CONCATENATES THE library2 DDDEF ENTRY, WHICH CONCATENATES OTHER DATA SETS. THIS IS NOT ALLOWED.
GIM57601E
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE IT CONCATENATES THE library2 DDDEF ENTRY, WHICH CONCATENATES OTHER DATA SETS. THIS IS NOT ALLOWED.
GIM57601S
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE IT CONCATENATES THE library2 DDDEF ENTRY, WHICH CONCATENATES OTHER DATA SETS. THIS IS NOT ALLOWED.
GIM57601T
DYNAMIC ALLOCATION FAILED FOR library1 BECAUSE IT CONCATENATES THE library2 DDDEF ENTRY, WHICH CONCATENATES OTHER DATA SETS. THIS IS NOT ALLOWED.
GIM57701T
AN I/O ERROR OCCURRED DURING command PROCESSING FOR THE dataset DATA SET.
GIM57702T
AN I/O ERROR OCCURRED DURING command PROCESSING FOR memtype MEMBER memname IN THE dataset DATA SET.
GIM57703T
AN I/O ERROR OCCURRED DURING command PROCESSING FOR memtype MEMBER memname IN THE dataset DATA SET. APPROXIMATE TTR=ttr.
GIM57801E
THE operand OPERAND IS NOT ALLOWED ON THE command COMMAND.
GIM57802I
THE operand OPERAND IS NO LONGER ALLOWED FOR THE command COMMAND.
GIM57802E
THE operand OPERAND IS NO LONGER ALLOWED FOR THE command COMMAND.
GIM57901S
SMPCSI DATA SET dataset IS OUT OF SPACE.
GIM58000S
command COMMAND PROCESSING FAILED. THE package-id PACKAGE CONTAINS ARCHIVE FILES THAT HAVE BEEN SEGMENTED. SEGMENTED ARCHIVE FILES ARE SUPPORTED ONLY BY SMP/E VERSION 3 RELEASE 2 OR HIGHER.
GIM58101I
progname IS NOT ALLOWED FOR THE utiltype UTILITY BECAUSE IT IS NOT DEFINED IN GIMUTTBL.
GIM58101W
progname IS NOT ALLOWED FOR THE utiltype UTILITY BECAUSE IT IS NOT DEFINED IN GIMUTTBL.
GIM58101S
progname IS NOT ALLOWED FOR THE utiltype UTILITY BECAUSE IT IS NOT DEFINED IN GIMUTTBL.
GIM58201S
ZONE zonename WAS NOT RENAMED BECAUSE THERE IS NO ZONEINDEX SUBENTRY FOR IT.
GIM58301S
zonename1 WAS NOT RENAMED BECAUSE THERE IS ALREADY A ZONEINDEX SUBENTRY FOR THE NEW NAME zonename2.
GIM58401S
zonename1 WAS NOT RENAMED BECAUSE THE NEW ZONE NAME zonename2 ALREADY EXISTS IN SMPCSI DATA SET dataset.
GIM58501I
ZONE zonename1 CANNOT BE RENAMED TO zonename2.
GIM58601I
ZONE zonename1 WAS RENAMED TO zonename2.
GIM58701I
ZONE zonename1 WAS RENAMED TO zonename2 IN SMPCSI DATA SET dataset.
GIM58801S
THERE IS A ZONEINDEX SUBENTRY FOR zonename BUT THE ZONE DOES NOT EXIST IN THE SMPCSI DATA SET.
GIM58900S
command PROCESSING HAS BEEN STOPPED. SMP/E WOULD HAVE MADE A CHANGE TO THE zonename ZONE THAT CAN NOT BE PROCESSED COMPLETELY BY PRIOR LEVELS OF SMP/E. USE THE UPGRADE COMMAND TO ALLOW SMP/E TO MAKE SUCH CHANGES.
GIM58901E
command PROCESSING FAILED FOR SYSMOD sysmodid. SYSMOD sysmodid WOULD HAVE CAUSED A CHANGE TO THE zonename ZONE THAT CAN NOT BE PROCESSED COMPLETELY BY PRIOR LEVELS OF SMP/E. USE THE UPGRADE COMMAND TO ALLOW SMP/E TO MAKE SUCH CHANGES.
GIM58902S
SMP/E CANNOT ASSIGN SOURCEID sourceid TO ANY SYSMODS BECAUSE IT WOULD MAKE A CHANGE TO THE zonename ZONE THAT CANNOT BE PROCESSED COMPLETELY BY PRIOR LEVELS OF SMP/E. USE THE UPGRADE COMMAND TO ALLOW SMP/E TO MAKE SUCH CHANGES.
GIM58903W
SMP/E COULD NOT PROCESS A ++mcs MCS BECAUSE IT WOULD HAVE MADE A CHANGE TO THE zonename ZONE THAT CANNOT BE PROCESSED COMPLETELY BY PRIOR LEVELS OF SMP/E. USE THE UPGRADE COMMAND TO ALLOW SMP/E TO MAKE SUCH CHANGES.
GIM58904E
command PROCESSING FAILED FOR SYSMOD sysmodid. SYSMOD sysmodid CONTAINS A SOURCEID VALUE THAT CANNOT BE PROCESSED BY THE CURRENT RELEASE OF SMP/E. THIS DATA IS SUPPORTED ONLY BY SMP/E VERSION ver RELEASE rel OR HIGHER.
GIM58905E
command PROCESSING FAILED FOR SYSMOD sysmodid. The SYSMOD ENTRY IN THE GLOBAL ZONE FOR SYSMOD sysmodid CONTAINS A SOURCEID SUBENTRY THAT WOULD HAVE CAUSED A CHANGE TO THE zonename ZONE THAT CANNOT BE PROCESSED COMPLETELY BY PRIOR LEVELS OF SMP/E. USE THE UPGRADE COMMAND TO ALLOW SMP/E TO MAKE SUCH CHANGES.
GIM58906S
command PROCESSING FAILED. SMP/E CANNOT ACCURATELY SELECT SYSMODS FOR PROCESSING USING THE SOURCEID VALUES IMPLICITLY SPECIFIED ON THE SOURCEID OR EXSRCID OPERANDS. ONE OR MORE SYSMODS IN THE GLOBAL ZONE CONTAINS A SOURCEID VALUE THAT CANNOT BE PROCESSED BY THE CURRENT RELEASE OF SMP/E. THE SOURCEIDS ARE SUPPORTED ONLY BY SMP/E VERSION 3 RELEASE 5 OR HIGHER.
GIM59001S
ZONE zonename WAS NOT RENAMED BECAUSE THE NEW ZONE NAME AND THE OLD ZONE NAME ARE THE SAME.
GIM59100W
THE UPGRADE COMMAND IS ONLY SUPPORTED BY SMP/E VERSION 3 RELEASE 2 OR HIGHER. THE COMMAND IS IGNORED.
GIM59201S
THE GLOBAL ZONE CANNOT BE RENAMED.
GIM59202S
“GLOBAL” IS NOT ALLOWED AS THE NEW NAME FOR A ZONE.
GIM59203E
“GLOBAL” IS NOT ALLOWED AS A ZONESET NAME.
GIM59301S
THE TOTYPE(TARGET) OPERAND WAS NOT PROCESSED BECAUSE zonename IS ALREADY DEFINED AS A TARGET ZONE IN THE ZONEINDEX SUBENTRY.
GIM59302S
THE TOTYPE(TARGET) OPERAND WAS NOT PROCESSED BECAUSE zonename IS ALREADY DEFINED BY A TARGET ZONE ENTRY.
GIM59401S
THE NEWDATASET OPERAND MUST NOT SPECIFY THE DATA SET THAT CURRENTLY CONTAINS THE ZONE TO BE RENAMED.
GIM59501I
OPTIONS SUBENTRY subentval WAS ADDED.
GIM59502I
THE OPTIONS SUBENTRY WAS CHANGED TO subentval.
GIM59503I
RELATED SUBENTRY subentval WAS ADDED.
GIM59504I
THE RELATED SUBENTRY WAS CHANGED TO subentval.
GIM59505I
A ZONE DEFINITION ENTRY WAS ADDED FOR zonename.
GIM59601I
ENQ WAS INITIATED FOR EXCLUSIVE USE OF dataset FOR command PROCESSING.
GIM59602I
ENQ WAS SUCCESSFUL FOR EXCLUSIVE USE OF dataset FOR command PROCESSING.
GIM59603I
ENQ WAS SUCCESSFUL FOR SHARED USE OF dataset FOR command PROCESSING.
GIM59604S
ENQ FAILED FOR EXCLUSIVE USE OF resource FOR command PROCESSING.
GIM59604W
ENQ FAILED FOR EXCLUSIVE USE OF dataset FOR command PROCESSING.
GIM59605S
ENQ FAILED FOR SHARED USE OF dataset FOR command PROCESSING.
GIM59605W
ENQ FAILED FOR SHARED USE OF dataset FOR command PROCESSING.
GIM59606I
DEQ WAS SUCCESSFUL FOR EXCLUSIVE USE OF dataset FOR command PROCESSING.
GIM59607I
DEQ WAS SUCCESSFUL FOR SHARED USE OF dataset FOR command PROCESSING.
GIM59608I
ENQ WAS INITIATED FOR SHARED USE OF dataset FOR command PROCESSING.
GIM59701I
THE GLOBAL ZONE WAS UPDATED WITH CHANGES FROM THE zonename ZONE.
GIM59801W
THE GLOBAL ZONE WAS NOT UPDATED WITH CHANGES FROM THE zonename ZONE.
GIM59801E
THE GLOBAL ZONE WAS NOT UPDATED WITH CHANGES FROM THE zonename ZONE.
GIM59801S
THE GLOBAL ZONE WAS NOT UPDATED WITH CHANGES FROM THE zonename ZONE.
GIM59801T
THE GLOBAL ZONE WAS NOT UPDATED WITH CHANGES FROM THE zonename ZONE.
GIM599I
JOB jobname HAS BEEN WAITING mm MINUTES FOR DATA SET dataset.
GIM60001S
command PROCESSING FAILED BECAUSE AN SMPCSI OR SMPPTS DATA SET WAS NOT AVAILABLE.
GIM60002S
GIMXSID PROCESSING FAILED BECAUSE A DATA SET IS NOT AVAILABLE. GIMXSID WAITED nnnn MINUTES FOR ALL DATA SETS TO BECOME AVAILABLE.
GIM60101S
PURGE IS NOT ALLOWED ON A ZONEEXPORT COMMAND FOR THE GLOBAL ZONE.
GIM60201I
ZONE zonename WAS SUCCESSFULLY WRITTEN TO OUTFILE dataset.
GIM60301S
THE ZONE TYPES ARE INCOMPATIBLE. THE RECEIVING ZONE zonename1 IS A zonetype1 ZONE AND THE INPUT ZONE zonename2 IS A zonetype2 ZONE.
GIM60401S
THE SET BOUNDARY ZONE zonename1 AND THE INTO ZONE zonename2 HAVE DIFFERENT NAMES.
GIM60402S
THE SET BOUNDARY ZONE zonename1 AND THE INPUT ZONE zonename2 HAVE DIFFERENT NAMES.
GIM60501S
THE INTO ZONE zonename ALREADY EXISTS IN SMPCSI DATA SET dataset.
GIM60601S
THE GLOBAL ZONE WAS NOT IMPORTED INTO dataset BECAUSE THAT DATA SET ALREADY CONTAINS A ZONE.
GIM60701S
ZONEIMPORT PROCESSING FOR ZONE zonename FROM INFILE dataset IS INCOMPLETE.
GIM60801I
THE ZONE TYPE FOR zonename WAS CHANGED FROM DLIB TO TARGET.
GIM60801W
THE ZONE TYPE OF zonename WAS CHANGED FROM DLIB TO TARGET.
GIM60901W
THERE IS NO ZONE DEFINITION ENTRY FOR ZONE zonename.
GIM60901S
THERE IS NO ZONE DEFINITION ENTRY FOR ZONE zonename.
GIM61001S
enttype IS NOT ALLOWED ON THE ZONEEDIT COMMAND. THE ENTRY TYPE MUST BE DDDEF, UTILITY, OR XZENTRIES.
GIM61101S
THE operand OPERAND IS NOT ALLOWED WHEN ZONEEDIT enttype IS REQUESTED.
GIM61201E
elmname WAS NOT MOVED BECAUSE SYSMOD sysmod CONTAINS MORE THAN ONE ++MOVE MCS TO MOVE elmname INTO THE SAME LIBRARY library. THIS IS NOT ALLOWED.
GIM61301S
THE NAME OF THE ZONE ON THE ZONEIMPORT COMMAND (zonename1) IS DIFFERENT FROM THE NAME OF THE ZONE IN THE INFILE DATA SET (zonename2). THE NAMES MUST BE THE SAME.
GIM61401S
THE INFILE DATA SET IS NOT IN THE FORMAT EXPECTED FOR THE ZONEIMPORT COMMAND.
GIM61501W
THE NAME OF THE IMPORTED ZONE WAS CHANGED FROM zonename1 TO zonename2.
GIM61601S
command PROCESSING FAILED BECAUSE THE INPUT ZONE AND RECEIVING ZONE HAVE THE SAME NAME (zonename).
GIM61701E
elmtype elmname WAS NOT MOVED BY SYSMOD sysmod BECAUSE IT DOES NOT EXIST IN THE SPECIFIED library LIBRARY.
GIM61702W
enttype entname WAS NOT RENAMED BY SYSMOD sysmod BECAUSE entname DOES NOT EXIST IN THE SPECIFIED library LIBRARY.
GIM61702E
LMOD elmname WAS NOT RENAMED BY SYSMOD sysmod BECAUSE elmname DOES NOT EXIST IN THE SPECIFIED library LIBRARY.
GIM61703W
enttype entname WAS NOT DELETED BY SYSMOD sysmod BECAUSE elmname DOES NOT EXIST IN THE SPECIFIED library LIBRARY.
GIM61704E
elmname WAS NOT MOVED BY SYSMOD sysmod BECAUSE elmname DOES NOT EXIST IN THE SPECIFIED library LIBRARY.
GIM61705E
ALIAS alias WAS NOT DELETED BY SYSMOD sysmod BECAUSE THE ALIAS IS GREATER THAN EIGHT CHARACTERS IN LENGTH AND RESIDES IN LIBRARY library, WHICH IS A PDSE.
GIM61706E
LMOD loadmod WAS NOT MOVED FROM library1 TO library2 FOR SYSMOD sysmod BECAUSE ITS LINK-EDIT CONTROL STATEMENTS INDICATE THAT IT HAS ASSOCIATED SYMBOLIC LINKS.
GIM61707E
LMOD loadmod WAS NOT RENAMED FOR SYSMOD sysmod BECAUSE ITS LINK-EDIT CONTROL STATEMENTS INDICATE THAT IT HAS ASSOCIATED SYMBOLIC LINKS.
GIM61801E
THE ++MOVE MCS FOR member IN SYSMOD sysmod SPECIFIES THE SAME LIBRARY (library) FOR BOTH libtypes. THIS IS NOT ALLOWED.
GIM61901I
elmtype elmname WAS NOT MOVED BY SYSMOD sysmod BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM61901W
elmtype elmname WAS NOT MOVED BY SYSMOD sysmod BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM61902W
elmtype elmname WAS NOT RENAMED BY SYSMOD sysmod BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM61903W
elmtype elmname WAS NOT DELETED BY SYSMOD sysmod BECAUSE IT IS NOT IN THE zonename ZONE.
GIM61904I
elmname WAS NOT MOVED BY SYSMOD sysmod BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM61904W
elmname WAS NOT MOVED BY SYSMOD sysmod BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM61904E
elmname WAS NOT MOVED BY SYSMOD sysmod BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM61905W
elmname WAS NOT RENAMED BY SYSMOD sysmod BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM61906W
elmname WAS NOT DELETED BY SYSMOD sysmod BECAUSE elmname IS NOT IN THE zonename ZONE.
GIM62001I
elmtype elmname WAS MOVED BY SYSMOD sysmod FROM librtype library1 TO library2.
GIM62002I
elmname WAS MOVED BY SYSMOD sysmod FROM librtype library1 TO library2.
GIM62101E
THE operand1 OPERAND IS REQUIRED BECAUSE THE operand2 OPERAND WAS SPECIFIED ON THE ++MOVE MCS IN SYSMOD sysmod.
GIM62102E
THE operand1 OPERAND IS NOT ALLOWED BECAUSE THE operand2 OPERAND WAS SPECIFIED ON THE ++MOVE MCS IN SYSMOD sysmod.
GIM62201E
THE ++mcstype MCS IS OUT OF SEQUENCE.
GIM62300S
program PROCESSING FAILED BECAUSE A stmt CONTROL STATEMENT FOR data set HAS ALREADY BEEN FOUND. ONLY ONE stmt CONTROL STATEMENT IS ALLOWED FOR EACH DATA SET.
GIM62401E
A MEMBER TYPE OPERAND IS REQUIRED ON THE ++mcstype MCS FOR elmname IN SYSMOD sysmod.
GIM62402E
A LIBRARY TYPE OPERAND IS REQUIRED ON THE ++mcstype MCS FOR elmname IN SYSMOD sysmod.
GIM62403E
A operand OPERAND IS REQUIRED ON THE ++mcstype MCS FOR elmname IN SYSMOD sysmod.
GIM62404E
THE operand1 OPERAND IS REQUIRED BECAUSE THE operand2 OPERAND WAS SPECIFIED ON THE ++mcstype MCS IN SYSMOD sysmod.
GIM62405E
THE operand1 OPERAND IS REQUIRED BECAUSE THE operand2 OPERAND WAS SPECIFIED ON THE ++mcstype MCS FOR elmname IN SYSMOD sysmod.
GIM62501T
value IS NOT A DEFINED DUMP POINT.
GIM62502T
MESSAGE ID msgid IS NOT AN SMP/E MESSAGE.
GIM62601E
CURRENT DATA SET NAME dataset1 WAS NOT CHANGED BECAUSE THE NEW NAME dataset2 EXCEEDS THE 44-CHARACTER MAXIMUM.
GIM62602S
THE DATA SET NAME DERIVED BY REPLACING THE HIGH-LEVEL QUALIFIER OF FILE filename WITH THE PREFIX VALUE OF prefix CREATES A NAME WHICH EXCEEDS THE 44-CHARACTER MAXIMUM.
GIM62701W
THE ++mcstype MCS FOR enttype ENTRY entname IN SYSMOD sysmod WAS NOT PROCESSED BECAUSE THE operand VALUE DOES NOT MATCH THE EXISTING operand VALUE.
GIM62701E
THE ++mcstype MCS FOR enttype ENTRY entname IN SYSMOD sysmod WAS NOT PROCESSED BECAUSE THE operand VALUE DOES NOT MATCH THE EXISTING operand VALUE.
GIM62702W
THE ++mcstype MCS FOR ENTRY entname IN SYSMOD sysmod WAS NOT PROCESSED BECAUSE THE operand VALUE DOES NOT MATCH THE EXISTING operand VALUE.
GIM62702E
THE ++mcstype MCS FOR ENTRY entname IN SYSMOD sysmod WAS NOT PROCESSED BECAUSE THE operand VALUE DOES NOT MATCH THE EXISTING operand VALUE.
GIM62801I
SMP/E WILL NOT USE STORAGE ABOVE 16MB BECAUSE SMP/E WAS LINK-EDITED WITH A LINKAGE EDITOR THAT DOES NOT RECOGNIZE AMODE.
GIM62901I
LMOD loadmod1 WAS RENAMED TO loadmod2 IN THE library LIBRARY BY SYSMOD sysmod.
GIM63100S
ARCHIVE archive COULD NOT BE EXTRACTED INTO EXISTING DATA SET dataset BECAUSE THE DATA SET ORGANIZATION OF THE DATA SET IS dsorg1 AND DOES NOT MATCH THE dsorg2 ORGANIZATION OF THE ORIGINAL DATA IN THE ARCHIVE.
GIM63101S
ARCHIVE archive COULD NOT BE EXTRACTED INTO EXISTING DATA SET dataset BECAUSE THE DATA SET IS NOT A clustertype VSAM CLUSTER.
GIM63102S
ARCHIVE archive COULD NOT BE EXTRACTED INTO EXISTING DATA SET dataset BECAUSE THE DATA SET TYPE OF THE DATA SET IS dsntype1 AND DOES NOT MATCH THE dsntype2 TYPE OF THE ORIGINAL DATA IN THE ARCHIVE.
GIM63201I
enttype entname WAS DELETED FROM THE library LIBRARY BY SYSMOD sysmod.
GIM63301E
SYSMOD sysmod WAS NOT RESTORED BECAUSE IT CONTAINS A ++DELETE MCS.
GIM63401S
ZONESET zoneset IS NOT DEFINED IN THE GLOBAL ZONE.
GIM63501S
THE ZONE WAS NOT COPIED BECAUSE THE INPUT SMPCSI AND THE RECEIVING SMPCSI ARE THE SAME.
GIM63600S
name COULD NOT BE EXTRACTED FROM ARCHIVE archive BECAUSE IT ALREADY EXISTS AND replace="YES" WAS NOT SPECIFIED.
GIM63700I
THE ORIGINAL DATA SET IN ARCHIVE archive HAS THE FOLLOWING ATTRIBUTES: LRECL=lrecl, RECFM=recfm, BLKSIZE=blksize.
GIM63800W
ATTRIBUTE attribute WAS SPECIFIED ON ONE OR MORE tagname TAGS FOR routine. THIS ATTRIBUTE IS SUPPORTED ONLY BY SMP/E VERSION 3 RELEASE 3 OR HIGHER.
GIM63800S
ATTRIBUTE attribute WAS SPECIFIED ON ONE OR MORE tagname TAGS FOR routine. THIS ATTRIBUTE IS SUPPORTED ONLY BY SMP/E VERSION 3 RELEASE 3 OR HIGHER.
GIM63801S
AN ATTEMPT WAS MADE TO PROCESS A VSAM DATA SET, OR A FILE OR DIRECTORY USING routine. THESE ARE SUPPORTED ONLY BY SMP/E VERSION 3 RELEASE 3 OR HIGHER.
GIM63802I
ARCHIVE NAMES UP TO 756 CHARACTERS IN LENGTH ARE SUPPORTED ONLY BY SMP/E VERSION 3 RELEASE 3 OR HIGHER.
GIM63901S
THE operand OPERAND IS REQUIRED ON THE command COMMAND.
GIM64001E
JOBCARD MEMBER memname IS NOT IN THE library LIBRARY. A JCL COMMENT WILL BE GENERATED EACH TIME A JOB CARD IS REQUIRED.
GIM64101E
NO ASSEMBLER STEP WAS GENERATED FOR MOD modname BECAUSE THERE IS NO ASSOCIATED ASSEM OR SRC ENTRY.
GIM64201E
MOD modname WAS NOT INCLUDED IN THE LINK-EDIT STEP FOR LMOD loadmod BECAUSE modname CANNOT BE ASSEMBLED.
GIM64301W
A JOB STEP WAS GENERATED TO COPY elmtype elmname FROM distlib TO targlib. elmtype ENTRY elmname HAS NO FMID AND THEREFORE MIGHT NOT HAVE BEEN INSTALLED. AN ERROR WILL OCCUR IF elmname IS NOT IN distlib.
GIM64401W
A JOB STEP WAS GENERATED TO COPY MOD elmname TO LMOD loadmod IN LIBRARY library. MOD ENTRY elmname HAS NO FMID AND THEREFORE MIGHT NOT HAVE BEEN INSTALLED. AN ERROR WILL OCCUR IF MOD elmname IS NOT IN THE DISTRIBUTION LIBRARY.
GIM64402W
A JOB STEP WAS GENERATED TO LINK-EDIT MOD elmname TO LMOD loadmod IN LIBRARY library. MOD ENTRY elmname HAS NO FMID AND THEREFORE MIGHT NOT HAVE BEEN INSTALLED. AN ERROR WILL OCCUR IF MOD elmname IS NOT IN THE DISTRIBUTION LIBRARY.
GIM64501W
NO LINK-EDIT STEPS WERE GENERATED FOR LMOD loadmod BECAUSE NO MOD ENTRIES SPECIFY loadmod AS AN LMOD SUBENTRY.
GIM64601E
A COMMENT WAS GENERATED FOR THE jclname JCL STATEMENT IN STEP stepname OF JOB jobname BECAUSE THERE IS NO DDDEF ENTRY FOR dddef.
GIM64602E
A COMMENT WAS GENERATED FOR THE jclname JCL STATEMENT IN STEP stepname OF JOB jobname BECAUSE THE DDDEF ENTRY FOR stepname DOES NOT CONTAIN A PATH SUBENTRY.
GIM64603E
NO SELECT STATEMENT WAS GENERATED FOR elmtype elmname IN STEP stepname OF JOB jobname. enttype ENTRY entname IS NEEDED TO PROCESS elmtype elmname, BUT IS NOT IN THE zonename ZONE.
GIM64604E
NO SELECT STATEMENT WAS GENERATED FOR elmtype elmname IN STEP stepname OF JOB jobname. DDDEF ENTRY entname IS NEEDED TO PROCESS elmtype elmname, BUT DDDEF ENTRY entname DOES NOT CONTAIN A PATH SUBENTRY.
GIM64605E
NO SELECT STATEMENT WAS GENERATED FOR elmtype elmname IN STEP stepname OF JOB jobname BECAUSE THE LENGTH OF THE EXECUTION PARAMETER STRING (I.E., THE EPARM VALUE) EXCEEDS THE MAXIMUM LENGTH OF 65,535 BYTES.
GIM64700I
FILE name ALREADY EXISTS AND WILL NOT BE TRANSFERRED.
GIM64801E
NO JOB STEP WAS GENERATED FOR enttype entname BECAUSE entname HAS NO DISTLIB SUBENTRY.
GIM64901E
NO JOBS WERE GENERATED BECAUSE NO ELEMENTS WERE SELECTED FOR THE FORFMID OPERAND.
GIM64902E
NO JOBS WERE GENERATED BECAUSE NO ELEMENTS IN THE TARGET ZONE WERE SELECTED FOR INSTALLATION.
GIM65001I
STEP stepname IN JOB jobname WAS NOT PROCESSED BECAUSE progname WAS NOT SPECIFIED AS A UTILITY ON THE JCLIN COMMAND.
GIM65001W
STEP stepname IN JOB jobname WAS NOT PROCESSED BECAUSE progname WAS NOT SPECIFIED AS A UTILITY ON THE JCLIN COMMAND.
GIM65002I
STEP stepname IN JOB jobname WAS NOT PROCESSED BECAUSE progname WAS NOT SPECIFIED AS A UTILITY ON THE ++JCLIN MCS IN SYSMOD sysmod.
GIM65002W
STEP stepname IN JOB jobname WAS NOT PROCESSED BECAUSE progname WAS NOT SPECIFIED AS A UTILITY ON THE ++JCLIN MCS IN SYSMOD sysmod.
GIM65101S
ZONE zonename IS AN EMPTY ZONE.
GIM65201S
CSI dataset DOES NOT CONTAIN A GIMZPOOL RECORD.
GIM65301S
THE operand OPERAND WAS SPECIFIED MORE THAN ONCE ON A ZONEEDIT CHANGE STATEMENT. THIS IS NOT ALLOWED.
GIM65401W
THE ZONE DESCRIPTION EXCEEDS THE 500-BYTE MAXIMUM. ONLY THE FIRST 500 BYTES WERE SAVED.
GIM65402I
THE size ATTRIBUTE FOR FILE archive WILL NOT BE GENERATED IN THE PACKAGE ATTRIBUTE FILE SINCE THE VALUE IS GREATER THAN 99,999,999,999.
GIM65403I
THE size ATTRIBUTE FOR THE PACKAGE WILL NOT BE GENERATED IN THE PACKAGE ATTRIBUTE FILE SINCE THE VALUE IS GREATER THAN 99,999,999,999.
GIM65404I
THE files ATTRIBUTE FOR THE PACKAGE WILL NOT BE GENERATED IN THE PACKAGE ATTRIBUTE FILE SINCE THE VALUE IS GREATER THAN 9,999.
GIM65405I
THE originalsize ATTRIBUTE FOR FILE archive WILL NOT BE GENERATED IN THE PACKAGE ATTRIBUTE FILE SINCE THE VALUE IS GREATER THAN 99,999,999,999.
GIM65406I
THE originalsize ATTRIBUTE FOR THE PACKAGE WILL NOT BE GENERATED IN THE PACKAGE ATTRIBUTE FILE SINCE THE VALUE IS GREATER THAN 99,999,999,999.
GIM65501S
ZONE zonename IN THE FORZONE OPERAND IS NOT DEFINED IN THE zoneset ZONESET.
GIM65601S
SMP/E ASSUMED THAT ALL THE ZONES IN THE ZONESET WERE zonetype1 ZONES. zonename IS A zonetype2 ZONE.
GIM65701E
LOAD MODULE BUILD PROCESSING STOPPED BECAUSE DISTRIBUTION ZONE zonename WAS NOT AVAILABLE.
GIM65801E
MODULE modname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod BUT IS NOT FOUND. THE MODULE IS NOT IN DISTRIBUTION ZONE zonename.
GIM65802E
MODULE modname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod1 BUT IS NOT FOUND. THE MODULE IS NOT IN DISTRIBUTION ZONE zonename, AND SYSMOD sysmod2 WHICH LAST REPLACED THE MODULE IS NOT IN THE SMPPTS.
GIM65803E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE MODULE modname IS NEEDED TO BUILD loadmod BUT IS NOT FOUND. THE MODULE IS NOT IN DISTRIBUTION ZONE zonename.
GIM65804E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE MODULE modname IS NEEDED TO BUILD loadmod BUT IS NOT FOUND. THE MODULE IS NOT IN DISTRIBUTION ZONE zonename, AND SYSMOD sysmod WHICH LAST REPLACED THE MODULE IS NOT IN THE SMPPTS.
GIM65901E
MODULE modname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod BUT CAN NOT BE USED. ITS DISTRIBUTION ZONE umidtype dzumid IS DIFFERENT FROM THE TARGET ZONE umidtype tzumid.
GIM65902E
MODULE modname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod1 BUT CAN NOT BE USED. ITS DISTRIBUTION ZONE umidtype dzumid IS DIFFERENT FROM THE TARGET ZONE umidtype tzumid, AND SYSMOD sysmod2 WHICH LAST REPLACED THE MODULE IS NOT IN THE SMPPTS.
GIM65903I
MODULE modname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod BUT THE SMPTLIB DATA SET COULD NOT BE ALLOCATED.
GIM65904I
membtype membname IN THE library LIBRARY IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod BUT library COULD NOT BE ALLOCATED.
GIM65905I
– LOAD MODULE loadmod.
GIM65906E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE MODULE modname IS NEEDED TO BUILD loadmod BUT CAN NOT BE USED. ITS DISTRIBUTION ZONE umidtype dzumid IS DIFFERENT FROM THE TARGET ZONE umidtype tzumid.
GIM65907E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE MODULE modname IS NEEDED TO BUILD loadmod BUT CAN NOT BE USED. ITS DISTRIBUTION ZONE umidtype dzumid IS DIFFERENT FROM THE TARGET ZONE umidtype tzumid, AND SYSMOD sysmod WHICH LAST REPLACED THE MODULE IS NOT IN THE SMPPTS.
GIM65908E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE MODULE modname IS NEEDED TO BUILD loadmod BUT ITS SMPTLIB DATA SET COULD NOT BE ALLOCATED.
GIM65909E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE memtype memname IN THE ddname LIBRARY IS NEEDED TO BUILD loadmod BUT ddname COULD NOT BE ALLOCATED.
GIM65910E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod. MODULE modname IS NEEDED TO BUILD loadmod, BUT COULD NOT BE ASSEMBLED BECAUSE ddname COULD NOT BE ALLOCATED.
GIM65911E
MODULE modname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod BUT IS NOT FOUND. THE MODULE'S DISTRIBUTION LIBRARY ddname COULD NOT BE ALLOCATED.
GIM65912E
MODULE modname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod1 BUT IS NOT FOUND. THE MODULE'S DISTRIBUTION LIBRARY ddname COULD NOT BE ALLOCATED, AND SYSMOD sysmod2 WHICH LAST REPLACED THE MODULE IS NOT IN THE SMPPTS.
GIM65913E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE MODULE modname IS NEEDED TO BUILD loadmod BUT CANNOT NOT BE USED. ITS DISTRIBUTION LIBRARY ddname COULD NOT BE ALLOCATED.
GIM65914E
LINK PROCESSING FAILED FOR LOAD MODULE loadmod BECAUSE MODULE modname IS NEEDED TO BUILD loadmod BUT CANNOT BE USED. ITS DISTRIBUTION LIBRARY ddname COULD NOT BE ALLOCATED, AND SYSMOD sysmod WHICH LAST REPLACED THE MODULE IS NOT IN THE SMPPTS.
GIM65915E
MOD modname IS NEEDED TO BUILD THE FOLLOWING LOAD MODULES FOR SYSMOD sysmod BUT AN ERROR WAS FOUND IN THE SMPPTS DATA SET.
GIM66001I
THE JCLIN CROSS-REFERENCE REPORT WAS FORMATTED IN ONE COLUMN BECAUSE SMP/E COULD NOT OBTAIN ENOUGH STORAGE FOR TWO COLUMNS.
GIM66101I
THE JCLIN CROSS-REFERENCE REPORT WAS FORMATTED IN ONE COLUMN BECAUSE SMP/E COULD NOT OBTAIN ENOUGH STORAGE FOR TWO COLUMNS.
GIM66201S
THERE ARE NO enttype ENTRIES IN THE zonename ZONE.
GIM66301E
THE ACCJCLIN SUBENTRY IS ONLY ALLOWED FOR A DLIBZONE ENTRY.
GIM66400I
THE TRANSFER IS COMPLETE FOR FILE name.
GIM66501E
value WAS SPECIFIED MORE THAN ONCE ON THE operand OPERAND OF THE ++mcstype MCS FOR elmname IN SYSMOD sysmod. THIS IS NOT ALLOWED.
GIM66601E
operand VALUE value IS THE SAME AS THE ELEMENT NAME ON THE ++mcstype MCS FOR elmname IN SYSMOD sysmod. THESE VALUES MUST BE DIFFERENT.
GIM66701T
DUMPON IS REQUIRED WITH THE SNAP OPERAND.
GIM66801E
enttype1 ENTRY entname WAS NOT DELETED FROM THE dataset DATA SET BECAUSE THERE IS NO CORRESPONDING enttype2 ENTRY FOR entname IN THE zonename TARGET ZONE.
GIM66802E
BACKUP ENTRIES FOR sysmod WERE NOT DELETED FROM THE SMPSCDS DATA SET BECAUSE THERE IS NO CORRESPONDING SYSMOD ENTRY FOR sysmod IN THE zonename TARGET ZONE.
GIM66901E
THE operand OPERAND EXCEEDS THE number-VALUE MAXIMUM ON THE mcstype MCS FOR elmname IN SYSMOD sysmod.
GIM67001E
THE SAME VALUE (zonename) WAS SPECIFIED FOR THE RELATED ZONE AND FOR THE ZONE ON THE SET COMMAND. THESE VALUES MUST BE DIFFERENT.
GIM67002S
THE SAME VALUE (value) WAS SPECIFIED FOR THE OUTFILE DDNAME AND FOR THE ZONE ON THE SET COMMAND. THESE VALUES MUST BE DIFFERENT.
GIM67003S
THE SAME VALUE (value) WAS SPECIFIED FOR THE INFILE DDNAME AND FOR THE ZONE ON THE SET COMMAND. THESE VALUES MUST BE DIFFERENT.
GIM67101I
THE REMAINING CHANGE STATEMENTS UP TO THE ENDZONEEDIT COMMAND WILL NOT BE PROCESSED.
GIM67201E
LOAD MODULE BUILD PROCESSING STOPPED BECAUSE NO RELATED DISTRIBUTION ZONE IS DEFINED FOR TARGET ZONE zonename.
GIM67301W
LOAD MODULE loadmod IN SYSLIB syslib DOES NOT INCLUDE MODULE modname BECAUSE modname HAS NOT BEEN INSTALLED.
GIM67302W
LOAD MODULE loadmod IN SYSLIBS syslib1 AND syslib2 DOES NOT INCLUDE MODULE modname BECAUSE modname HAS NOT BEEN INSTALLED.
GIM67401E
LOAD MODULE loadmod WAS NOT BUILT IN SYSLIB syslib.
GIM67402E
LOAD MODULE loadmod WAS NOT BUILT IN SYSLIBS syslib1 AND syslib2.
GIM67501I
MODULE modname IS REQUIRED FOR LOAD MODULE loadmod.
GIM67601I
SMPTLIB dataset WAS CATALOGED ON VOLUME volser.
GIM67602I
SMPTLIB dataset WAS DELETED FROM VOLUME volser.
GIM67701I
LOG RECORDING WAS SWITCHED TO SMPOUT BECAUSE SMPLOGA DOES NOT HAVE THE SAME BLKSIZE VALUE AS SMPLOG.
GIM67801T
DUMPOFF IS NOT ALLOWED FOR value BECAUSE value IS ALREADY OFF.
GIM67802T
DUMPOFF IS NOT ALLOWED FOR MSGIDS BECAUSE DUMPMSG IS ALREADY OFF.
GIM67901W
MOD ENTRY entname CONTAINS THE SAME VALUE (subval) FOR THE TALIAS AND LMOD SUBENTRIES. THE TALIAS SUBENTRY WAS IGNORED AND SHOULD BE DELETED.
GIM68001I
THE DUMP ID FOR msgid IS dumpid.
GIM68100S
DATA SET dataset COULD NOT BE EXTRACTED FROM ARCHIVE archive BECAUSE COPY PROCESSING FAILED. THE RETURN CODE FROM THE COPY UTILITY WAS rtncode.
GIM68200E
PROCESSING FAILED FOR THE command UNIX SYSTEM SERVICE COMMAND.
GIM68301I
ARCHIVE archive WILL BE EXTRACTED INTO THE DATA SET dataset THAT IS CATALOGED ON VOLUME volume1, EVEN THOUGH THE <ARCHDEF> TAG FOR THE ARCHIVE SPECIFIED VOLUME volume2, BECAUSE THE DATA SET WAS NOT FOUND ON VOLUME volume2.
GIM68400I
command PROCESSING FAILED FOR SYSMOD sysmod. AN ELEMENT HAS BEEN DELETED DURING COMPRESS PROCESSING THAT HAS NOT BEEN REINSTALLED.
GIM68500S
command COMMAND PROCESSING HAS FAILED BECAUSE NO ORDER ENTRY NAMES ARE AVAILABLE FOR USE.
GIM68600E
ORDER ENTRY entname COULD NOT BE MERGED BECAUSE AN ENTRY WITH THE SAME NAME EXISTS IN THE DESTINATION GLOBAL ZONE AND A UNIQUE ORDER ENTRY NAME COULD NOT BE GENERATED.
GIM68700I
ORDER entname HAS BEEN SENT TO THE SERVER AT location.
GIM68800S
RECEIVE FROMNTS PROCESSING HAS FAILED. THE PACKAGE FOR ORDER ENTRY entname CANNOT BE RECEIVED BECAUSE IT HAS NOT YET BEEN DOWNLOADED.
GIM68900S
RECEIVE FROMNTS PROCESSING HAS FAILED. THE PACKAGE FOR ORDER ENTRY entname CANNOT BE RECEIVED BECAUSE THE ORDER IS IN ERROR.
GIM69000E
THE DATA WAS NOT TRANSFORMED BECAUSE THE OPEN MACRO FAILED FOR THE dataset DATA SET.
GIM69001E
THE DATA WAS NOT TRANSFORMED BECAUSE THE dataset DATA SET IS MISSING.
GIM69002E
THE DATA WAS NOT TRANSFORMED BECAUSE THE ATTRIBUTES OF THE dataset DATA SET ARE NOT SUPPORTED.
GIM69003E
THE DATA WAS NOT TRANSFORMED BECAUSE THE GETMAIN MACRO FAILED FOR THE WORK AREAS.
GIM69004T
THE DATA WAS NOT TRANSFORMED BECAUSE OF AN I/O ERROR. SYNAD INFORMATION FOLLOWS – jobname,stepname,unit address,device type,ddname,operation attempted,error description,actual track address and block number,access method
GIM69005W
THE SYSUT2 DATA SET WAS NOT BLOCKED OR HAD A BLOCKSIZE THAT WAS NOT A MULTIPLE OF 80. IT HAS BEEN BLOCKED WITH A BLOCKSIZE OF 3200.
GIM69006I
sysut1 WAS TRANSFORMED INTO sysut2.
GIM69007E
THE DATA WAS NOT TRANSFORMED BECAUSE THE SYSUT1 DATA SET WAS EMPTY.
GIM69008I
GIMDTS PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE IS rtncode.
GIM69009E
elmtype elmname COULD NOT BE RETRANSFORMED BECAUSE THE attribute OF value1 FOR LIBRARY library CONFLICTS WITH THE ORIGINAL attribute OF value2 FOR THE DATA.
GIM69010E
AN ERROR OCCURRED IN RETRANSFORMATION OF elmtype elmname ON THE library LIBRARY. DATA HAS BEEN LOST.
GIM69011I
RETRANSFORMATION OF elmtype elmname ON LIBRARY library WAS UNSUCCESSFUL FOR SYSMOD sysmod.
GIM69012I
RETRANSFORMATION OF elmtype elmname ON LIBRARY library WAS SUCCESSFUL FOR SYSMOD sysmod.
GIM69013S
THE ZONES TO BE COMPARED HAVE NO MATCHING SREL.
GIM69014S
THE zonename ZONE WAS SPECIFIED ON THE operand OPERAND BUT IT DOES NOT EXIST.
GIM69015E
THE GLOBAL ZONE IS NOT ALLOWED AS THE VALUE OF THE operand OPERAND.
GIM69015S
THE GLOBAL ZONE IS NOT ALLOWED AS THE VALUE OF THE operand OPERAND.
GIM69016S
THE INZONE AND COMPAREDTO OPERANDS SPECIFIED THE SAME ZONE.
GIM69017S
THE zonename ZONE WAS SPECIFIED ON THE operand OPERAND BUT IT CONTAINED NO SYSMOD ENTRIES.
GIM69022I
WHEN THE CONTENT OF AN ORDER IS HOLDDATA THEN THE HOLDDATA SELECTION OPERAND IS ASSUMED AND THE SYSMODS SELECTION OPERAND IS IGNORED.
GIM69031E
SMP/E COULD NOT ADD SYSLIB syslib TO enttype entname BECAUSE THE MAXIMUM NUMBER OF SYSLIB SUBENTRIES WOULD HAVE BEEN EXCEEDED.
GIM69032S
SOURCEID sourceid HAS ALREADY BEEN SPECIFIED ON EITHER THE SOURCEID OR EXSRCID OPERAND.
GIM69033E
enttype entname WAS NOT RENAMED BY SYSMOD sysmod BECAUSE entname ALREADY EXISTS IN THE SPECIFIED library LIBRARY.
GIM69034S
ZONE zonename1 WAS NOT RENAMED BECAUSE THE NEW ZONE NAME (zonename2) IS THE SAME AS THE NAME FOR A TIEDTO ZONE.
GIM69035E
THE SAME VALUE (zonename) WAS SPECIFIED FOR THE TIEDTO ZONE AND FOR THE ZONE ON THE SET COMMAND. THESE VALUES MUST BE DIFFERENT.
GIM69036E
THE subtype1 SUBENTRY FOR enttype entname WILL NOT BE DELETED BECAUSE entname CONTAINS subtype2 SUBENTRIES.
GIM69037E
THE subtype1 SUBENTRY FOR enttype entname WILL NOT BE ADDED BECAUSE AFTER PROCESSING IS COMPLETE NO subtype2 SUBENTRY WILL EXIST FOR entname.
GIM69038E
THE SAME VALUE (zonename) WAS SPECIFIED FOR THE ZONE CONTAINING THE CROSS-ZONE entname AND FOR THE ZONE ON THE SET COMMAND. THESE VALUES MUST BE DIFFERENT.
GIM69039E
UCLIN PROCESSING FAILED BECAUSE EXISTING XZMOD SUBENTRIES INDICATE THAT MODULE modname EXISTS IN ZONE zonename1, BUT THE CURRENT COMMAND INDICATES THAT ZONE zonename2 SHOULD CONTAIN MODULE modname.
GIM69040E
THE operand OPERAND IS ONLY ALLOWED FOR A zonetype ZONE.
GIM69040S
THE operand OPERAND IS ONLY ALLOWED FOR A zonetype ZONE.
GIM69041S
CONDITIONAL CHANGES ARE NOT ALLOWED WHEN ZONEEDIT enttype IS SPECIFIED.
GIM69042S
AN ASTERISK (*) IS NOT ALLOWED FOR THE FROM VALUE OF A CHANGE STATEMENT FOR ZONEVALUE.
GIM69043S
THE SAME VALUE (zonename) WAS SPECIFIED FOR THE CROSS-ZONE NAME AND FOR THE ZONE ON THE SET COMMAND. THESE VALUES MUST BE DIFFERENT.
GIM69044W
A TIEDTO SUBENTRY WAS FOUND FOR ZONE zonename.
GIM69045W
enttype1 entname1 IN ZONE zonename1 CONTAINS AN subtype SUBENTRY INDICATING A CROSS-ZONE RELATIONSHIP WITH enttype2 entname2 IN ZONE zonename2.
GIM69046W
LMOD loadmod CONTAINS MOD modname FROM ZONE zonename. MOD modname WILL NOT BE INCLUDED IN THE LINK-EDIT STEP FOR LMOD loadmod.
GIM69047E
enttype1 entname1 CONTAINS AN subtype SUBENTRY INDICATING A CROSS-ZONE RELATIONSHIP WITH enttype2 entname2 IN ZONE zonename. THIS SUBENTRY WAS NOT ADDED TO THE INTO ZONE BECAUSE THE CROSS-ZONE NAME MATCHES THE INTO ZONE NAME (zonename).
GIM69048S
enttype ENTRY entname IS NEEDED FOR LINK PROCESSING BUT IS NOT IN ZONE zonename.
GIM69049S
enttype entname IS NEEDED FOR LINK PROCESSING BUT THE ENTRY IN zonetype ZONE zonename DOES NOT CONTAIN BOTH AN FMID AND AN RMID.
GIM69050S
LMOD loadmod FOR MOD modname IN ZONE zonename IS NEEDED FOR LINK PROCESSING BUT IS NOT INSTALLED IN A SYSTEM LIBRARY.
GIM69051S
LMOD loadmod IS NEEDED FOR LINK PROCESSING BUT IS MARKED AS BEING COPIED.
GIM69052S
SMP/E WILL NOT LINK MOD modname FROM ZONE zonename1 INTO LMOD loadmod BECAUSE THIS MOD WAS PREVIOUSLY INCLUDED FROM ZONE zonename2.
GIM69053I
LINK PROCESSING WAS SUCCESSFUL FOR LMOD loadmod IN SYSLIB syslib. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM69053W
LINK PROCESSING WAS SUCCESSFUL FOR LMOD loadmod IN SYSLIB syslib. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM69054E
LINK PROCESSING FAILED FOR LMOD loadmod IN SYSLIB syslib. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM69055W
MOD modname IN ZONE zonename1 WILL NOT BE LINKED INTO LMOD lmodname IN ZONE zonename2 BECAUSE CROSS-ZONE UPDATES ARE BEING DEFERRED.
GIM69056W
CROSS-ZONE PROCESSING WILL NOT BE DONE FOR LMOD loadmod IN ZONE zonename BECAUSE LMOD loadmod DOES NOT EXIST IN ZONE zonename.
GIM69057W
LMOD loadmod IN ZONE zonename1 DOES NOT REFER TO MOD modname IN ZONE zonename2. CROSS-ZONE UPDATE PROCESSING TO LMOD loadmod FOR MOD modname WILL NOT BE ATTEMPTED.
GIM69058W
CROSS-ZONE UPDATE PROCESSING WILL NOT BE ATTEMPTED FOR LMOD loadmod IN ZONE zonename BECAUSE SYSLIB library COULD NOT BE ALLOCATED.
GIM69059W
MOD modname IN ZONE zonename1 WILL NOT BE LINKED INTO LMOD lmodname IN ZONE zonename2 BECAUSE SMP/E COULD NOT FIND A USABLE COPY OF THE MODULE CONTAINING THE ZAP.
GIM69060W
MOD modname IN ZONE zonename1 WILL BE LINKED INTO LMOD lmodname IN ZONE zonename2 BUT UPDATES TO THIS MOD BY SYSMOD sysmod WILL NOT BE INCLUDED.
GIM69061W
LINK-EDIT PROCESSING FAILED FOR MOD modname IN LMOD loadmod IN ZONE zonename IN SYSLIB syslib. THE RETURN CODE WAS rtncode.
GIM69062I
LINK-EDIT PROCESSING WAS SUCCESSFUL FOR MOD modname IN LMOD loadmod IN ZONE zonename IN SYSLIB syslib. THE RETURN CODE WAS rtncode.
GIM69063W
MOD modname WILL NOT BE DELETED FROM LMOD loadmod IN ZONE zonename BECAUSE CROSS-ZONE UPDATES ARE BEING DEFERRED.
GIM69064W
MODULE modname WILL BE LINK-EDITED BUT ITS SERVICE LEVEL OR FMID IN THE DISTRIBUTION ZONE IS DIFFERENT FROM THAT IN THE TARGET ZONE.
GIM69065W
PROGRAM progname WAS REQUIRED FOR SMP/E command CROSS-ZONE PROCESSING BUT WAS NOT AVAILABLE.
GIM69066I
LMOD loadmod FOR MOD modname IS NOT IN ZONE zonename.
GIM69067S
AN ERROR OCCURRED WHEN SMP/E TRIED TO UPDATE MOD ENTRY modname IN ZONE zonename TO SHOW THAT LMOD loadmod1 WAS RENAMED TO loadmod2.
GIM69068W
MOD modname IN ZONE zonename WAS NOT UPDATED TO SHOW THAT LMOD loadmod1 WAS RENAMED TO loadmod2 BECAUSE CROSS-ZONE UPDATES ARE BEING DEFERRED.
GIM69069W
CROSS-ZONE PROCESSING WILL NOT BE ATTEMPTED FOR LMOD loadmod IN ZONE zonename BECAUSE THE CALLLIBS FOR LMOD loadmod COULD NOT BE ALLOCATED
GIM69070S
operand value HAS ALREADY BEEN SPECIFIED.
GIM69071S
THE SAME VALUE (zonename) WAS SPECIFIED FOR THE FROMZONE OPERAND AND FOR THE ZONE ON THE SET COMMAND. THESE VALUES MUST BE DIFFERENT.
GIM69072S
THE command COMMAND WAS NOT PROCESSED BECAUSE THE FROMZONE IS NOT A TARGET ZONE.
GIM69073I
MOD modname IN ZONE zonename WAS SUCCESSFULLY UPDATED TO SHOW THAT LMOD loadmod1 WAS RENAMED TO loadmod2.
GIM69074S
enttype entname IS NEEDED FOR LINK PROCESSING BUT IS NOT INSTALLED IN THE library LIBRARY.
GIM69075W
LMOD loadmod IN ZONE zonename DOES NOT EXIST IN SYSLIB syslib. CROSS-ZONE UPDATE PROCESSING WILL NOT BE ATTEMPTED FOR LMOD loadmod IN ZONE zonename.
GIM69076E
UCLIN PROCESSING FAILED BECAUSE THE XZMOD OPERAND SPECIFIED THE SAME MODULE (modname) FOR MORE THAN ONE ZONE.
GIM69077S
AN I/O ERROR OCCURRED WHEN SMP/E WAS TRYING TO LOCATE enttype entname IN CROSS-ZONE zonename.
GIM69078W
LMOD loadmod CONTAINS A MODULE CONTROLLED BY ANOTHER ZONE AND MODULES THAT WERE NOT SELECTED TO BE INSTALLED. THE CURRENT LOAD MODULE WILL BE INCLUDED IN THE LINK-EDIT STEP FOR THE NEW LOAD MODULE.
GIM69079S
command PROCESSING STOPPED BECAUSE NO RELATED DISTRIBUTION ZONE IS DEFINED FOR TARGET ZONE zonename.
GIM69080S
command PROCESSING STOPPED BECAUSE DISTRIBUTION ZONE zonename WAS NOT AVAILABLE.
GIM69081S
SMP/E WILL NOT LINK MOD modname FROM ZONE zonename INTO LMOD loadmod BECAUSE THIS LMOD ALREADY CONTAINS A MOD WITH THE SAME NAME.
GIM69082W
LMOD loadmod IS NEEDED FOR LINK PROCESSING BUT IS NOT INSTALLED IN SYSLIB syslib.
GIM69083S
NO LINKS WERE PROCESSED FOR THIS LINK COMMAND.
GIM69084E
THE subtype SUBENTRY FOR enttype entname FROM ZONE zonename WAS NOT ADDED BECAUSE IT ALREADY EXISTS.
GIM69085E
THE subtype SUBENTRY FOR enttype entname FROM ZONE zonename WAS NOT DELETED BECAUSE IT DOES NOT EXIST.
GIM69086I
MOD modname FROM SYSMOD sysmod WILL BE DELETED FROM LMOD loadmod IN ZONE zonename.
GIM69087I
MOD modname FROM SYSMOD sysmod WILL BE REPLACED IN LMOD loadmod IN ZONE zonename.
GIM69088I
ZAP FOR MOD modname FROM SYSMOD sysmod WILL BE INCLUDED IN LMOD loadmod IN ZONE zonename.
GIM69089I
MOD modname FROM SYSMOD sysmod WILL NOT BE DELETED FROM LMOD loadmod IN ZONE zonename.
GIM69090I
MOD modname FROM SYSMOD sysmod WILL NOT BE REPLACED IN LMOD loadmod IN ZONE zonename.
GIM69091I
ZAP FOR MOD modname FROM SYSMOD sysmod WILL NOT BE INCLUDED IN LMOD loadmod IN ZONE zonename.
GIM69092I
CROSS-ZONE PROCESSING WILL NOT BE DONE BECAUSE THERE ARE NO CROSS-ZONE UPDATES REQUIRED.
GIM69093W
MOD modname IN ZONE zonename WILL NO LONGER BE INCLUDED IN LMOD loadmod. A LINK COMMAND IS NEEDED TO INCLUDE MOD modname IN LMOD loadmod.
GIM69094I
MOD modname IN ZONE zonename WILL BE UPDATED TO SHOW THAT LMOD loadmod1 WAS RENAMED TO loadmod2.
GIM69095W
enttype1 entname1 IN ZONE zonename1 CONTAINS AN subtype SUBENTRY INDICATING A CROSS-ZONE RELATIONSHIP WITH enttype2 entname2 IN ZONE zonename2. THIS SUBENTRY WAS NOT MERGED INTO ZONE zonename3 BECAUSE enttype1 entname1 ONLY EXISTS AS A STUB ENTRY IN ZONE zonename1.
GIM69096W
enttype1 entname1 IN ZONE zonename1 CONTAINS AN subtype SUBENTRY INDICATING A CROSS-ZONE RELATIONSHIP WITH enttype2 entname2 IN ZONE zonename2. THIS SUBENTRY WAS MERGED INTO ZONE zonename3.
GIM69097E
enttype1 entname1 IN ZONE zonename1 CONTAINS AN subtype SUBENTRY INDICATING A CROSS-ZONE RELATIONSHIP WITH enttype2 entname2 IN ZONE zonename2. THIS SUBENTRY WAS NOT MERGED INTO ZONE zonename3 BECAUSE THE CROSS-ZONE NAME MATCHES THE INTO ZONE NAME.
GIM69098E
THE TARGET ZONE CONTAINS A TIEDTO SUBENTRY FOR ZONE zonename. THIS SUBENTRY WAS NOT ADDED TO THE INTO ZONE BECAUSE THE CROSS-ZONE NAME MATCHES THE INTO ZONE NAME (zonename).
GIM69099S
enttype1 entname1 CONTAINS AN subtype SUBENTRY INDICATING A CROSS-ZONE RELATIONSHIP WITH enttype2 entname2 IN ZONE zonename. ZONERENAME PROCESSING FAILED BECAUSE THE CROSS-ZONE NAME MATCHES THE NEW ZONE NAME (zonename).
GIM69100S
THE ZONE VALUE IN AN subtype SUBENTRY FOR enttype1 entname1 WAS NOT CHANGED TO zonename. enttype1 entname1 ALREADY CONTAINS AN subtype SUBENTRY FOR enttype2 entname2 IN ZONE zonename.
GIM69101S
THE ZONE VALUE IN A TIEDTO SUBENTRY WAS NOT CHANGED TO zonename1. ZONE zonename2 ALREADY CONTAINS A TIEDTO SUBENTRY FOR ZONE zonename1.
GIM69102I
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69102W
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69102E
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69102S
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69102T
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69103W
SMP/E WAS UNABLE TO UPDATE MOD ENTRY modname IN ZONE zonename TO SHOW THAT LMOD loadmod1 WAS RENAMED TO loadmod2 BECAUSE THE CSI DATA SET CONTAINING ZONE zonename IS NOT AVAILABLE.
GIM69104E
MOD modname FROM SYSMOD sysmod WILL NOT BE INCLUDED IN LMOD loadmod BECAUSE A MODULE WITH THE SAME NAME FROM ZONE zonename IS ALREADY INCLUDED IN THIS LMOD.
GIM69105S
LINK PROCESSING FAILED BECAUSE ZONE zonename RELATED TO FROMZONE fromzone IS NOT A DLIB ZONE.
GIM69106I
THE TIEDTO SUBENTRY FOR ZONE zonename1 WILL BE DELETED FROM ZONE zonename2 BECAUSE THERE IS NO LONGER A CROSS-ZONE RELATIONSHIP BETWEEN THE TWO ZONES.
GIM69107I
DYNAMIC ALLOCATION WAS SUCCESSFUL FOR library USING DDDEF ddname FROM ZONE zonename - allocparms.
GIM69108I
DYNAMIC DEALLOCATION WAS SUCCESSFUL FOR library, WHICH WAS ALLOCATED USING DDDEF ddname FROM ZONE zonename.
GIM69109I
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT FOR ddname IN ZONE zonename FAILED.
GIM69109W
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT FOR ddname IN ZONE zonename FAILED.
GIM69109E
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT FOR ddname IN ZONE zonename FAILED.
GIM69109S
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT FOR ddname IN ZONE zonename FAILED.
GIM69109T
ALLOCATION WAS NOT ATTEMPTED FOR library BECAUSE A PREVIOUS ALLOCATION ATTEMPT FOR ddname IN ZONE zonename FAILED.
GIM69110I
svc99fn FAILED FOR library USING DDDEF ddname FROM ZONE zonename - errortext.
GIM69110W
svc99fn FAILED FOR library USING DDDEF ddname FROM ZONE zonename - errortext.
GIM69110E
svc99fn FAILED FOR library USING DDDEF ddname FROM ZONE zonename - errortext.
GIM69110S
svc99fn FAILED FOR library USING DDDEF ddname FROM ZONE zonename - errortext.
GIM69110T
svc99fn FAILED FOR library USING DDDEF ddname FROM ZONE zonename - errortext.
GIM69111I
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT FOR ddname IN THE JCL AND NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69111W
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT FOR ddname IN THE JCL AND NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69111E
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT FOR ddname IN THE JCL AND NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69111S
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT FOR ddname IN THE JCL AND NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69111T
ALLOCATION FAILED FOR library BECAUSE THERE IS NO DD STATEMENT FOR ddname IN THE JCL AND NO DDDEF ENTRY FOR ddname IN zonetype ZONE zonename.
GIM69112W
CROSS-ZONE UPDATES WILL NOT BE MADE TO ZONE zonename BECAUSE IT IS NOT DEFINED AS A TARGET ZONE.
GIM69113W
OPTIONS(ddname) WAS SPECIFIED IN THE PARAMETER LIST ON STEP stepname BUT THE ddname DD STATEMENT WAS NOT FOUND IN THE stepname STEP.
GIM69114W
MOD modname IN ZONE zonename1 WILL NOT BE REPLACED IN LMOD lmodname IN ZONE zonename2 BECAUSE THE CSI DATA SET CONTAINING ZONE zonename2 IS NOT AVAILABLE.
GIM69115W
MOD modname IN ZONE zonename1 WILL NOT BE UPDATED IN LMOD lmodname IN ZONE zonename2 BECAUSE THE CSI DATA SET CONTAINING ZONE zonename2 IS NOT AVAILABLE.
GIM69116W
MOD modname IN ZONE zonename1 WILL NOT BE DELETED FROM LMOD lmodname IN ZONE zonename2 BECAUSE THE CSI DATA SET CONTAINING ZONE zonename2 IS NOT AVAILABLE.
GIM69117W
MOD modname IN ZONE zonename1 WILL NOT BE REPLACED IN LMOD lmodname IN ZONE zonename2 BECAUSE OF A PREVIOUS ERROR.
GIM69118W
ZAP FOR MOD modname IN ZONE zonename1 WILL NOT BE INCLUDED IN LMOD lmodname IN ZONE zonename2 BECAUSE OF A PREVIOUS ERROR.
GIM69119W
MOD modname IN ZONE zonename1 WILL NOT BE DELETED FROM LMOD lmodname IN ZONE zonename2 BECAUSE OF A PREVIOUS ERROR.
GIM69120W
SMP/E WAS UNABLE TO UPDATE MOD ENTRY entname IN ZONE zonename TO SHOW THAT LMOD loadmod1 WAS RENAMED TO loadmod2 BECAUSE OF A PREVIOUS ERROR.
GIM69121W
MOD modname IN ZONE zonename1 WILL NOT BE UPDATED IN LMOD lmodname IN ZONE zonename2 BECAUSE CROSS-ZONE UPDATES ARE BEING DEFERRED.
GIM69122S
AN I/O ERROR OCCURRED WHEN SMP/E WAS TRYING TO LOCATE LMOD loadmod FROM ZONE zonename IN SYSLIB dataset.
GIM69123W
MOD modname IN ZONE zonename1 DOES NOT REFER TO LMOD lmodname1 IN ZONE zonename2. MOD modname IN ZONE zonename1 WILL NOT BE UPDATED TO SHOW THAT LMOD lmodname1 WAS RENAMED TO lmodname2.
GIM69124I
command PROCESSING FOR THE SET-TO ZONE IS COMPLETE. THE HIGHEST RETURN CODE WAS rtncode.
GIM69125I
command CROSS-ZONE PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS rtncode.
GIM69126S
MOD modname IN ZONE zonename1 IS NEEDED FOR LINK PROCESSING BUT IS NOT INSTALLED IN A SYSTEM LIBRARY.
GIM69127W
LMOD loadmod IS NEEDED TO COMPLETE CROSS-ZONE PROCESSING FOR MOD modname BUT IT DOES NOT EXIST IN ZONE zonename.
GIM69128I
MOD modname WILL BE DELETED FROM LMOD loadmod IN ZONE zonename.
GIM69129I
MOD modname WILL BE REPLACED IN LMOD loadmod IN ZONE zonename.
GIM69130I
MOD modname WILL NOT BE DELETED FROM LMOD loadmod IN ZONE zonename.
GIM69131I
MOD modname WILL NOT BE REPLACED IN LMOD loadmod IN ZONE zonename.
GIM69132W
CROSS-ZONE UPDATES WILL NOT BE MADE TO ZONE zonename BECAUSE CROSS-ZONE PROCESSING FOR THIS ZONE IS DEFERRED.
GIM69133W
CROSS-ZONE UPDATES WILL NOT BE MADE TO ZONE zonename BECAUSE THE CSI DATA SET CONTAINING ZONE zonename IS NOT AVAILABLE.
GIM69134W
CROSS-ZONE UPDATES WILL NOT BE MADE TO ZONE zonename BECAUSE AN ERROR WAS ENCOUNTERED WHILE PROCESSING THE ZONE.
GIM69135W
CROSS-ZONE PROCESSING WAS NOT COMPLETED FOR ZONE zonename BECAUSE OF A PREVIOUS ERROR.
GIM69136W
ASSEMBLY asmname IN SYSMOD sysmod WAS NOT INSTALLED IN ANY TARGET LIBRARY. asmname MAY HAVE TO BE UPDATED IN LMOD loadmod IN ZONE zonename.
GIM69137S
USERID userid IS NOT AUTHORIZED TO ACCESS KEY RING keyring.
GIM69138W
LMOD loadmod WAS NOT DELETED FROM LIBRARY library BY SYSMOD sysmod BECAUSE loadmod DOES NOT EXIST IN LIBRARY library.
GIM69139W
LOAD MODULE loadmod IN SYSLIB syslib DOES NOT INCLUDE MODULE modname IN ZONE zonename BECAUSE modname IS A CROSS-ZONE MODULE.
GIM69140I
ALLOCATION WAS NOT ATTEMPTED FOR A CALLLIBS CONCATENATION BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM69140W
ALLOCATION WAS NOT ATTEMPTED FOR A CALLLIBS CONCATENATION BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM69140E
ALLOCATION WAS NOT ATTEMPTED FOR A CALLLIBS CONCATENATION BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM69140S
ALLOCATION WAS NOT ATTEMPTED FOR A CALLLIBS CONCATENATION BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM69140T
ALLOCATION WAS NOT ATTEMPTED FOR A CALLLIBS CONCATENATION BECAUSE A PREVIOUS ALLOCATION ATTEMPT IN THIS ZONE FAILED.
GIM69141W
THE LINK-EDIT OF LMOD loadmod FROM ZONE zonename WAS NOT ATTEMPTED BECAUSE LMOD loadmod IS NOT IN THE SMPLTS.
GIM69141E
THE LINK-EDIT OF LMOD loadmod FROM ZONE zonename WAS NOT ATTEMPTED BECAUSE LMOD loadmod IS NOT IN THE SMPLTS.
GIM69142I
OPEN PROCESSING FOR ZONE zonename IN DATA SET dataset FAILED BECAUSE LSR WAS SPECIFIED AND THE LARGEST BUFFER SIZE IN THE CURRENT POOL WAS EXCEEDED.
GIM69143I
SMP/E SUCCESSFULLY OPENED DATA SET zonename WITHOUT LSR TO COMPLETE COMMAND PROCESSING.
GIM69144I
ORDER entname IS READY FOR DOWNLOAD.
GIM69145W
NO PTFS SATISFIED THE SELECTION CRITERIA FOR ORDER entname. ORDER entname WILL BE MODIFIED AND RESENT TO THE SERVER TO OBTAIN HOLDDATA.
GIM69146S
RECEIVE ORDER PROCESSING HAS FAILED. THE PACKAGE FOR ORDER ENTRY entname HAS ALREADY BEEN DOWNLOADED.
GIM69147S
SMP/E WAITED min MINUTES BUT ORDER entname IS NOT READY FOR DOWNLOAD FROM THE SERVER AT location. IT WILL BE AT LEAST remainmin MINUTES BEFORE THE ORDER IS READY.
GIM69148S
KEY RING keyring ASSOCIATED WITH USERID userid WAS NOT FOUND.
GIM69149W
CALLLIBS COULD NOT BE ALLOCATED FOR LMOD loadmod IN ZONE zonename.
GIM69149E
CALLLIBS COULD NOT BE ALLOCATED FOR LMOD loadmod IN ZONE zonename.
GIM69150W
ZAP PROCESSING WAS NOT DONE FOR LMOD loadmod IN THE SMPLTS BECAUSE THE LMOD DOES NOT EXIST IN THE SMPLTS.
GIM69151I
DYNAMIC DEALLOCATION WAS SUCCESSFUL FOR THE library CONCATENATION.
GIM69152I
PROGRAM progname MAY BE REQUIRED FOR SMP/E PROCESSING BUT IS NOT AVAILABLE.
GIM69153E
PATH MUST END WITH A SLASH (/).
GIM69153S
THE PATH FROM_VALUE MUST END WITH A SLASH ("/").
GIM69154E
PATH IS NOT ALLOWED WITH ANY OTHER DDDEF SUBENTRIES.
GIM69155E
command PROCESSING FAILED FOR SYSMOD sysmod. sysmod INCLUDES elmtype elmname BUT THE HFSCOPY UTILITY progname WAS NOT AVAILABLE.
GIM69156E
command PROCESSING FAILED FOR SYSMOD sysmod. sysmod INCLUDES elmtype elmname BUT THE HFSCOPY UTILITY progname WAS NOT DEFINED IN GIMUTTBL.
GIM69157T
THE service CALLABLE SERVICE IS NEEDED TO PROCESS FILE filename IN LIBRARY library BUT IS NOT AVAILABLE.
GIM69158I
progname WAS NOT ABLE TO SET THE EFFECTIVE UID AND REAL UID TO 0. THIS IS NORMAL IF THE CURRENT UID IS NOT AUTHORIZED TO THE BPX.SUPERUSER FACILITY CLASS PROFILE. CALLABLE SERVICE BPX1SRU GAVE A RETURN CODE OF 'rtncode'X WITH A REASON CODE OF 'rsncode'X.
GIM69159S
command PROCESSING HAS FAILED. THE SERVER AT location IS NOT RESPONDING.
GIM69160S
command PROCESSING HAS FAILED. THE SERVER AT location IS RESPONDING BUT REQUIRED FUNCTIONS ARE NOT AVAILABLE.
GIM69161T
FILE filename WAS NOT REMOVED FROM THE library LIBRARY. THE RETURN CODE FROM THE service SERVICE WAS rtncode AND THE REASON CODE WAS rsncode.
GIM69162I
FILE filename1 WAS RENAMED TO filename2 IN THE library LIBRARY.
GIM69163T
FILE filename1 COULD NOT BE RENAMED TO filename2 IN THE library LIBRARY. THE RETURN CODE FROM THE service SERVICE WAS rtncode AND THE REASON CODE WAS rsncode.
GIM69164E
THE subtype VALUE ON THE stattype STATEMENT FOR enttype entname EXCEEDS THE maxlen CHARACTER MAXIMUM.
GIM69164S
THE PATH VALUE ON THE CHANGE STATEMENT EXCEEDS THE 255-CHARACTER MAXIMUM.
GIM69165I
SMP/E COULD NOT OBTAIN ENOUGH STORAGE FOR ENHANCED PERFORMANCE PROCESSING. SMP/E WILL CONTINUE PROCESSING IN A DEGRADED MODE.
GIM69166W
THE SYSLIB ALLOCATION IN STEP stepname OF JOB jobname SPECIFIED DUPLICATE DDNAME duplname. THE DUPLICATE DDNAME IS IGNORED.
GIM69167I
HFSCOPY PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR enttype entname IN SYSMOD sysmod. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM69167W
HFSCOPY PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR enttype entname IN SYSMOD sysmod. THE RETURN CODE WAS rtncode. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM69168E
HFSCOPY PROCESSING TO THE library LIBRARY FAILED FOR enttype entname IN SYSMOD sysmod. THE RETURN CODE ( rtncode) EXCEEDED THE ALLOWABLE VALUE. DATE yy.ddd - TIME hh:mm:ss - SEQUENCE NUMBER seqno.
GIM69169W
THE GLOBAL ZONE IS NOT ALLOWED FOR THE ZONES OPERAND OF THE REPORT CALLLIBS COMMAND.
GIM69170I
ALTHOUGH THE dataset DATA SET WAS NOT ALLOCATED, PROCESSING WILL CONTINUE FOR THE command COMMAND. HOWEVER, NO OUTPUT WILL BE WRITTEN TO THE dataset DATA SET.
GIM69171E
AN ERROR OCCURRED DURING REPORT CALLLIBS GENERATION OF STEP stepname IN JOB jobname. THE LINK-EDIT PARAMETER STRING WAS TRUNCATED BECAUSE IT EXCEEDS THE 100-CHARACTER MAXIMUM.
GIM69172E
THE JOBCARD OPERAND IS MISSING FROM THE command COMMAND. A COMMENT WILL TAKE THE PLACE OF THE JOB STATEMENT IN THE GENERATED JCL.
GIM69173S
command PROCESSING HAS FAILED. THE CLIENT CERTIFICATE IS NOT VALID.
GIM69174E
THE SPECIFIED CHANGES WERE NOT PROCESSED. BECAUSE THE ENTRY CONTAINS A DATASET SUBENTRY, IT MUST ALSO CONTAIN A VALUE FOR THE INITIAL DISPOSITION.
GIM69175W
THE BASE VERSION OF LOAD MODULE loadmod WAS DELETED FROM THE SMPLTS LIBRARY. THE EXECUTABLE VERSION OF THAT LOAD MODULE IN ITS TARGET LIBRARIES MAY INCLUDE MODULES FROM THE CALLLIBS LIBRARIES.
GIM69176T
FILE filename COULD NOT BE ACCESSED IN THE library LIBRARY. USING ACCESS MODE accmode THE RETURN CODE FROM THE service SERVICE WAS rtncode AND THE REASON CODE WAS rsncode.
GIM69177I
LIBRARY library WAS NOT COMPRESSED BECAUSE IT IS A PATH.
GIM69178S
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE THE dataset DATA SET NAME THAT WAS CONSTRUCTED EXCEEDS THE 44-CHARACTER MAXIMUM.
GIM69179S
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE THE DATA SET NAME SPECIFIED FOR THE dataset1 DATA SET IS THE SAME AS THE DATA SET NAME SPECIFIED FOR THE dataset2 DATA SET. THIS IS NOT ALLOWED.
GIM69180S
command PROCESSING FAILED FOR SYSMOD sysmod BECAUSE SMP/E RECEIVED A RETURN CODE OF rtncode FROM THE macro MACRO.
GIM69181S
command PROCESSING HAS FAILED. THE CLIENT CERTIFICATE HAS EXPIRED.
GIM69182S
command PROCESSING HAS FAILED. THE CLIENT CERTIFICATE IS NOT AUTHORIZED TO PERFORM THE REQUESTED OPERATION ON THE SERVER AT location.
GIM69183I
svc99fn WAS SUCCESSFUL FOR dataset.
GIM69184E
elmtype elmname COULD NOT BE DELETED FROM THE library LIBRARY BY SYSMOD sysmod BECAUSE library IS NOT ALLOCATED TO A PATH.
GIM69185E
AN INVALID ENTRY HAD BEEN ENCOUNTERED IN THE SMPSCDS DATA SET FOR SYSMOD sysmod.
GIM69186E
elmtype elmname CANNOT BE PROCESSED IN LIBRARY library FOR SYSMOD sysmod BECAUSE THE EXECUTION PARAMETER STRING NEEDED TO INVOKE THE HFSCOPY UTILITY EXCEEDS THE MAXIMUM LENGTH OF 65,535 BYTES.
GIM69187S
command PROCESSING HAS FAILED. THE SERVER AT location DETECTED AN ERROR IN THE REQUEST.
GIM69188S
command PROCESSING HAS FAILED. AN ERROR WAS FOUND IN THE RESPONSE RECEIVED FROM THE SERVER AT location.
GIM69189S
command PROCESSING HAS FAILED FOR ORDER entname. ORDER entname WITH ORDERID orderid IS NOT RECOGNIZED BY THE SERVER AT location.
GIM69190S
command PROCESSING HAS FAILED FOR ORDER entname. ACCESS TO ORDER entname WITH ORDERID orderid WAS DENIED BECAUSE THE ORDER WAS REQUESTED BY USERID userid USING A DIFFERENT CLIENT IDENTITY.
GIM69191S
command PROCESSING HAS FAILED FOR ORDER entname. THE PACKAGE FOR ORDER entname WITH ORDERID orderid HAS EXPIRED FROM THE DOWNLOAD SERVER.
GIM69192S
command PROCESSING HAS FAILED FOR ORDER entname. AN ERROR WAS FOUND IN THE RESPONSE RECEIVED FROM THE SERVER AT location WHEN PROCESSING ORDER entname WITH ORDERID orderid.
GIM69193I
SMP/E ATTEMPTED TO CONFIRM THE DOWNLOAD FOR ORDER entname WITH ORDERID orderid BUT AN ERROR WAS FOUND IN THE RESPONSE FROM THE SERVER AT location.
GIM69194I
ORDER ENTRY oldname WAS RENAMED TO newname BECAUSE AN ENTRY WITH THE SAME NAME ALREADY EXISTS IN THE DESTINATION GLOBAL ZONE.
GIM69195S
command PROCESSING HAS FAILED. THE SERVER AT location DETECTED AN ERROR: status-code — reason-phrase.
GIM69196I
ORDER ENTRY entname IS PENDING COMPLETION ON THE SERVER AT location.
GIM69197I
operand1 AND operand2 ARE MUTUALLY EXCLUSIVE OPERANDS. operand2 IS BEING IGNORED.
GIM69198S
CERTIFICATE certificate WAS NOT FOUND CONNECTED TO KEY RING keyring.
GIM69199E
A LINK VALUE ON THE MCS FOR elmtype elmname IN SYSMOD sysmod EXCEEDS THE 64 CHARACTER MAXIMUM. z/OS® level SMP/E (OR HIGHER) SUPPORTS LINK VALUES UP TO 1023 CHARACTERS LONG.
GIM69200E
RETRANSFORMATION FAILED FOR elmtype elmname IN THE library LIBRARY FOR SYSMOD sysmod. ABEND abncode OCCURRED WHILE PROCESSING library. THE library LIBRARY RAN OUT OF SPACE.
GIM69201I
SMPDATA1 DATA SET smpdata1 IS OUT OF SPACE.
GIM69201S
SMPDATA1 DATA SET smpdata1 IS OUT OF SPACE.
GIM69202I
LIBRARY CHANGE RECORDING WAS SWITCHED TO SMPDATA2 BECAUSE SMPDATA1 IS FULL.
GIM69203S
SMPDATA2 DATA SET smpdata2 IS OUT OF SPACE.
GIM69204S
RECEIVE ORDER PROCESSING HAS FAILED. THE PACKAGE FOR ORDER ENTRY entname CANNOT BE DOWNLOADED. THE ORDER IS IN ERROR STATUS.
GIM69205S
RECEIVE PROCESSING HAS FAILED. AN ERROR WAS FOUND IN THE ORDERSERVER INFORMATION FOUND IN ORDER ENTRY entname.
GIM69206S
command PROCESSING HAS FAILED BECAUSE PROGRAM modname WAS UNEXPECTEDLY TERMINATED.
GIM69207S
command PROCESSING HAS FAILED BECAUSE THE CONNECTION WITH THE SERVER FAILED. text
GIM69208S
command PROCESSING HAS FAILED BECAUSE THE LEVEL OF PROGRAM progname1 (vr.pp) IS NOT COMPATIBLE WITH THE LEVEL OF THE SMP/E CALLING PROGRAM progname2 (vr.pp).
GIM69209S
command PROCESSING HAS FAILED BECAUSE PROGRAM progname COULD NOT BE STARTED.
GIM69210S
command PROCESSING HAS FAILED FOR PENDING ORDER entname. PTF name WAS SPECIFIED ON THE CONTENT OPERAND BUT WAS NOT FOUND BY THE SERVER.
GIM69211S
command PROCESSING HAS FAILED FOR PENDING ORDER entname. APAR name WAS SPECIFIED ON THE CONTENT OPERAND BUT A FIXING PTF WAS NOT FOUND BY THE SERVER.
GIM69212S
command PROCESSING HAS FAILED FOR ORDER entname. A PACKAGE FOR ORDER entname WITH ORDERID orderid CANNOT BE CREATED BECAUSE THE PACKAGE SIZE (pkgsize BYTES) WOULD EXCEED THE THRESHOLD FOR INTERNET DELIVERY (maxsize BYTES) .
GIM69213S
A PTF ORDER WAS NOT SENT TO THE SERVER BECAUSE NO PTFS WILL BE APPLICABLE TO THE GLOBAL ZONE OR TARGET ZONES.
GIM69214W
NO HOLDDATA PACKAGE IS AVAILABLE FOR DOWNLOAD. ORDER ENTRY entname WAS DELETED.
GIM69216I
PROGRAM modname WAS UNEXPECTEDLY TERMINATED.
GIM69217I
THE LEVEL OF PROGRAM program1 (vr.pp) IS NOT COMPATIBLE WITH THE LEVEL OF THE SMP/E CALLING PROGRAM program2 (vr.pp).
GIM69218I
PROGRAM program COULD NOT BE STARTED.
GIM69221W
CERTIFICATE certname WILL EXPIRE WITHIN expdays DAYS.
GIM69222S
command PROCESSING HAS FAILED. SMP/E COULD NOT INVOKE A JAVA PROGRAM BECAUSE THE JAVA RUNTIME LOCATION (THE JAVA HOME DIRECTORY) IS NOT DEFINED.
GIM69223I
SMP/E COULD NOT INVOKE A JAVA PROGRAM BECAUSE THE JAVA RUNTIME LOCATION (THE JAVA HOME DIRECTORY) IS NOT DEFINED.
GIM69224S
NO FIX CATEGORIES HAVE BEEN SPECIFIED. EITHER THE FIXCAT OPERAND MUST BE SPECIFIED ON THE COMMAND, OR THE ACTIVE OPTIONS ENTRY MUST HAVE A FIXCAT SUBENTRY.
GIM69225E
command PROCESSING FAILED FOR SYSMOD sysmodid. A FIXCAT HOLD REASONID EXISTS FOR SYSMOD sysmodid THAT CANNOT BE PROCESSED BY THE CURRENT RELEASE OF SMP/E. FIXCAT HOLDS ARE SUPPORTED ONLY BY SMP/E VERSION 3 RELEASE 5 OR HIGHER.
GIM69226I
responseElement = value.
GIM69227W
operand value HAS ALREADY BEEN SPECIFIED. THE DUPLICATE VALUE HAS BEEN IGNORED.
GIM69228I
NO FIXCAT HOLDDATA MATCHING THE SPECIFIED FIXCAT OR FORFMID VALUES WAS FOUND.
GIM69229I
ONE OR MORE REQUESTED PTFS WERE NOT FOUND BY THE SERVER. ORDER entname WILL BE MODIFIED AND RESENT TO THE SERVER TO OBTAIN THE REMAINING REQUESTED PTFS.
GIM69230E
PTF name WAS SPECIFIED ON THE CONTENT OPERAND FOR ORDER entname BUT WAS NOT FOUND BY THE SERVER.
GIM69231E
APAR name WAS SPECIFIED ON THE CONTENT OPERAND FOR ORDER entname BUT A FIXING PTF WAS NOT FOUND BY THE SERVER.
GIM69232S
command PROCESSING HAS FAILED BECAUSE THERE WAS AN FTP ERROR AFTER number ATTEMPTS.
GIM69233I
FTP FAILED, ATTEMPT number OF max attempts. FTP WILL BE RETRIED IN wait SECONDS.
GIM69234I
FTP FAILED, ATTEMPT number OF max attempts.
GIM69235S
OPEN PROCESSING FAILED FOR THE zonename ZONE IN THE GLOBAL ZONE IN CSI dataset.
GIM69236S
value IS NOT DEFINED AS A ZONE OR ZONESET IN THE GLOBAL ZONE IN CSI dataset.
GIM69237S
ZONE zonename WAS NOT USED BECAUSE IT IS NOT DEFINED BY A ZONEINDEX SUBENTRY IN THE GLOBAL ZONE IN CSI dataset.
GIM69238S
SMP/E ASSUMED THAT ALL THE ZONES SPECIFIED ON THE ZONES OPERAND WERE zonetype1 ZONES. zonename IS A zonetype2 ZONE.
GIM69239S
THERE IS NO ZONE DEFINITION RECORD FOR ZONE zonename IN THE GLOBAL ZONE IN CSI dataset.
GIM69240S
ZONE zonename IS DEFINED AS A zonetype1 ZONE IN THE ZONEINDEX SUBENTRY IN THE GLOBAL ZONE IN CSI dataset. THIS CONFLICTS WITH THE ZONE TYPE OF zonetype2.
GIM69241S
THE zonename ZONE IN THE GLOBAL ZONE IN CSI dataset WAS SPECIFIED ON THE operand OPERAND BUT IT DOES NOT EXIST.
GIM69242S
THE operand1 OR operand2 OPERAND IS REQUIRED ON THE command COMMAND.
GIM69243S
SMP/E ASSUMED THAT ALL THE ZONES SPECIFIED ON THE ZONES OPERAND WERE zonetype1 ZONES. zonename IN THE GLOBAL ZONE IN CSI dataset IS A zonetype2 ZONE.
GIM69244S
A GLOBAL ZONE CSI DATA SET NAME IS NOT VALID ON THE ZONES OPERAND FOR THE REPORT command COMMAND.
GIM69245W
ZONE zonename IN THE GLOBAL ZONE IN CSI dataset IS THE SAME AS ANOTHER ZONE THAT HAS BEEN SPECIFIED. THE DUPLICATE VALUE HAS BEEN IGNORED.
GIM69246E
SYSMOD sysmod IN ZONE from-zone CANNOT BE MERGED BECAUSE OF THE FOLLOWING CONDITIONS.
GIM69247W
THE FOLLOWING CONDITIONS FOR SYSMOD sysmod IN ZONE from-zone WERE NOT SATISFIED, BUT WERE IGNORED BECAUSE THE BYPASS OPERAND WAS SPECIFIED.
GIM69248I
SYSMOD sysmod IS ALREADY INSTALLED IN ZONE into-zone.
GIM69249I
SYSMOD sysmod1 IS DELETED BY SYSMOD sysmod2 IN ZONE into-zone.
GIM69250I
SYSMOD sysmod1 IS SUPERSEDED BY SYSMOD sysmod2 IN ZONE into-zone.
GIM69251I
SYSMOD sysmod1 DELETES SYSMOD sysmod2 WHICH IS IN ZONE into-zone.
GIM69252I
SYSMOD sysmod1 SUPERSEDES SYSMOD sysmod2 WHICH IS IN ZONE into-zone.
GIM69253I
SYSMOD sysmod1 IS MUTUALLY EXCLUSIVE WITH SYSMOD sysmod2 IN ZONE into-zone. SYSMOD causer IN ZONE zone CONTAINS THE NPRE.
GIM69254I
CONDITIONAL REQUISITE SYSMOD req FOR FMID req-fmid IN ZONE zone IS MISSING. SYSMOD causer FOR FMID causer-fmid CONTAINED THE ++IF.
GIM69255E
entry-type entry-name IN ZONE from-zone CANNOT BE MERGED BECAUSE entry-type entry-name ALREADY EXISTS IN ZONE into-zone.
GIM69256S
ZONEMERGE PROCESSING STOPPED BECAUSE ONE OR MORE VERIFICATION ERRORS HAVE BEEN DETECTED.
GIM69264S
THE attribute VALUE EXCEEDS THE maxlen CHARACTER MAXIMUM.
GIM693I
SMP/E HAS BEEN WAITING waitmin MINUTES FOR ORDER entname. SMP/E WILL WAIT A MAXIMUM OF maxmin MINUTES.
GIM694I
SMP/E HAS WAITED waitmin MINUTES FOR ORDER ordername AND WILL CONTINUE TO WAIT BECAUSE NOLIMIT WAS SPECIFIED.
GIM70505S
SMP/E could not obtain enough storage for processing.
GIM70510S
An unusual condition occurred in modname. The requested command is either missing or invalid.
GIM70511S
An unusual condition occurred in modname. The GLOBAL zone CSI data set name is missing.
GIM70512S
An unusual condition occurred in modname. The list of target zones to be processed is either missing or invalid.
GIM70513S
An unusual condition occurred in modname. No input parameters were provided.
GIM70514S
The low-level qualifier of a CSI data set name must be CSI.
GIM70515S
The CSI data set name exceeds the 44 character maximum.
GIM70516S
An unusual condition occurred in modname. The list of related data sets to be processed is either missing or incorrect.
GIM70517S
An unusual condition occurred in module. The volume serial is missing.
GIM70518S
An unusual condition occurred in modname. The list of entries to be processed is either missing or incorrect.
GIM70519S
An unusual condition occurred in modname. The list of workflows to be processed is either missing or incorrect.
GIM70520E
Directory path for DDDEF dddefname in the zonename zone is not found or is not mounted.
GIM70521E
Permission was denied to directory path for DDDEF dddefname in the zonename zone.
GIM70522E
An attempt to obtain the name of the data set containing directory path for DDDEF dddefname in the zonename zone failed. The return code from the service callable service was 'rtncode'X and the reason code was 'rsncode'X.
GIM70523E
An attempt to obtain the target path name of symbolic link path for DDDEF dddefname in the zonename zone failed. The return code from the service callable service is 'rtncode'x and the reason code is 'rsncode'x.
GIM70524E
Data set datasetname on volume volser from DDDEF entry dddefname in zonetype zone zonename has an unsupported record format for a target or distribution library. The record format is recfm.
GIM70525E
zonetype zone zonename will not be processed because it resides in data set datasetname which was previously determined to be in error.
GIM70526E
Data set datasetname is cataloged on volume volser but volume volser is not mounted or does not exist.
GIM70527E
Data set datasetname is cataloged on volume volser but data set datasetname was not found on volume volser.
GIM70528E
Directory path for DDDEF entry dddefname in the zonename zone is contained in a temporary file system (TFS). The directory must reside in a physical z/OS UNIX file system data set, either zFS or HFS.
GIM70529E
Entry type type is not a defined SMP/E element type.
GIM70530E
Data set dataset for DDDEF entry ddname in zone zonename does not exist in the catalog or the catalog cannot be accessed.
GIM70531I
Data set dataset is migrated and is being recalled.
GIM70531E
Data set dataset is migrated and is being recalled.
GIM70532I
The zonename zone could not be processed because data set dataset is in use by another application.
GIM70532E
The zonename zone could not be processed because data set dataset is in use by another application.
GIM70533E
CSI data set dataset for the zonename zone does not exist in the catalog or the catalog cannot be accessed.
GIM70534E
DDDEF dddefname in zone zonename indicates data set dataset resides on volume volser, but data set dataset was not found on volume volser.
GIM70535E
DDDEF dddefname in zone zonename indicates data set dataset resides on volume volser, but volume volser is not mounted or does not exist.
GIM70536E
The OBTAIN macro failed while trying to access data set dataset on volume volser. The return code was rc.
GIM70537E
Data set dataset was not found on volume volser.
GIM70538E
Volume volser is not mounted or does not exist.
GIM70538S
Volume volser is not mounted or does not exist.
GIM70539E
One or more volume symbolics could not be resolved for data set dataset. The volume list for the data set is vollist.
GIM70540E
Data set dataset does not exist in the catalog or the catalog cannot be accessed.
GIM70541E
Data set dataset for the zonename zone was not found on volume volser.
GIM70542E
Volume volser for the zonename zone in data set dataset is not mounted or does not exist.
GIM70543E
One or more volume symbolics could not be resolved for data set dataset which contains the zonename zone. The volume list for the data set is vollist.
GIM70544E
The UCBSCAN macro failed while attempting to obtain the UCB for volume volser. The return code was rc and the reason code was reason.
GIM70544S
The UCBSCAN macro failed while attempting to obtain the UCB for volume volser. The return code was rc and the reason code was reason.
GIM70545E
Data set space information cannot be determined for data set dataset.
GIM70546E
The LSPACE macro failed while attempting to obtain space information for volume volser. The return code was rc.
GIM70547E
Unsupported or unknown device type encountered for volume volser.
GIM70548E
Data set dataset for the zonename zone is an invalid data set type for a CSI.
GIM70549E
Data set dataset cannot be processed because the data set type is not supported.
GIM70550S
The macro macro failed while attempting to obtain a list of data sets for volume volser. The return code was rc.
GIM70552I
Only the track managed space on the volume is displayed and used for space calculations. Cylinder managed space is ignored.
GIM70560E
A DDDEF entry for ddname is required in zone zonename but was not found.
GIM70561E
The DDDEF entry for ddname in zone zonename must identify a DATASET or a PATH subentry.
GIM70562E
elementtype elementname was not found in data set datasetname on volume volser from DDDEF entry dddefname in zonetype zone zonename. The FMID for elementname is fmid and the RMID is rmid.
GIM70563E
A valuetype for elementtype elementname was not found in data set datasetname on volume volser from DDDEF entry dddefname in zonetype zone zonename. The FMID is fmid and the RMID is rmid. The valuetype is valuename.
GIM70564E
elementtype elementname was not found in data set datasetname on volume volser from DDDEF dddefname in zonetype zone zonename.
GIM70565E
A valuetype for elementtype elementname was not found in data set datasetname on volume volser from DDDEF entry dddefname in zonetype zone zonename. The valuetype is valuename.
GIM70566E
elementtype elementname was not found in directory dirname from DDDEF entry dddefname in zonetype zone zonename. The FMID for elementname is fmid and the RMID is rmid.
GIM70567E
A valuetype for elementtype elementname was not found in directory dirname from DDDEF entry dddefname in zonetype zone zonename. The FMID is fmid and the RMID is rmid. The valuetype is valuename.
GIM70568E
elementtype elementname was not found in directory dirname from DDDEF dddefname in zonetype zone zonename.
GIM70569E
A valuetype for elementtype elementname was not found in directory dirname from DDDEF entry dddefname in zonetype zone zonename. The valuetype is valuename.
GIM70570S
THIS JOB STEP WAS NOT GENERATED BY z/OSMF SOFTWARE DEPLOYMENT AND IS NOT AUTHORIZED TO RUN THE GIMADR UTILITY.
GIM70580E
Zone zonename is not defined by a ZONEINDEX subentry in the GLOBAL zone in dataset.
GIM70581E
Zone zonename is not defined as a TARGET zone in the ZONEINDEX subentry in the GLOBAL zone in dataset.
GIM70582E
No related DISTRIBUTION zone is defined for TARGET zone zonename.
GIM70583E
The zonename zone is not defined in CSI data set dataset.
GIM70584S
Connect processing failed for the zonename zone in data set dataset.
GIM70585E
Open processing failed for the zonename zone in data set dataset.
GIM70586E
An I/O error occurred when trying to access a record in the zonename zone in data set dataset.
GIM70587E
service processing failed for data set datasetname. The system abend code was abendcode and the reason code was abendrsncode.
GIM70588E
service processing failed for data set datasetname. The return code was returncode and the reason code was reasoncode.
GIM70589E
The entrytype entryname entry in zone zonename must identify a SYSLIB subentry.
GIM70590E
Directory path is not found or is not mounted.
GIM70591E
Permission was denied to directory path.
GIM70592E
An attempt to obtain the name of the data set containing directory path failed. The return code from the service callable service was 'rtncode'X and the reason code was 'rsncode'X.
GIM70593E
An attempt to obtain the target path name of symbolic link path failed. The return code from the service callable service is 'rtncode'x and the reason code is 'rsncode'x.
GIM70598E
Directory path is contained in a temporary file system (TFS). The directory must reside in a physical z/OS UNIX file system data set, either zFS or HFS.
GIM70700T
UTILITY progname WAS NOT FOUND.
GIM70704S
THE GIMIAP JOB STEP CONTAINS MORE THAN ONE INVOKE STATEMENT. ONLY ONE IS ALLOWED.
GIM70705I
GIMIAP PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS rtncode.
GIM70707S
THE ctlcard1 CONTROL CARD IS MISSING. ONE IS EXPECTED BEFORE THE ctlcard2 CONTROL CARD.
GIM70708S
GIMIAP COULD NOT OBTAIN ENOUGH STORAGE FOR PROCESSING.
GIM70709E
NO ELEMENTS WERE IDENTIFIED TO BE COPIED FROM LIBRARY library1 TO LIBRARY library2.
GIM70710E
NO ELEMENTS WERE IDENTIFIED TO BE COPIED IN THIS JOB STEP.
GIM70711T
library DD STATEMENT WAS NOT FOUND.
GIM70712E
elmtype ELEMENT elmname WAS NOT FOUND IN LIBRARY library.
GIM70713E
AN ERROR WAS ENCOUNTERED BY SHELL SCRIPT shellscr WHILE INSTALLING elmtype elmname.
GIM70714E
SHELL SCRIPT PROCESSING FOR elmtype elmname FAILED. SERVICE service ENDED WITH RETURN CODE rtncode AND REASON CODE rsncode.
GIM70715E
AN ERROR OCCURRED DURING A command OPERATION TO THE dataset DATA SET.
GIM70716E
member NOT REPLACED FROM INPUT DATA SET BECAUSE REPLACE WAS NOT SPECIFIED ON THE INVOKE CONTROL CARD.
GIM70717I
GIMIAP PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR enttype entname.
GIM70718E
GIMIAP PROCESSING TO THE library LIBRARY FAILED FOR enttype entname.
GIM70720S
GIMIAP PROCESSING FROM THE library1 LIBRARY TO THE library2 LIBRARY FAILED. THERE IS AN INCONSISTENCY IN THE DATA SET ATTRIBUTES. THE REASON CODE IS rsncode.
GIM70721I
GIMIAP PROCESSING TO THE library LIBRARY WAS SUCCESSFUL FOR enttype entname. BLANK DATA HAS BEEN TRUNCATED.
GIM70722E
STOW PROCESSING TO THE library LIBRARY FAILED FOR alias (ALIAS of elmtype elmname).
GIM70723E
GIMIAP PROCESSING TO THE library LIBRARY FAILED FOR enttype entname. NON-BLANK DATA WOULD HAVE BEEN TRUNCATED.
GIM70724S
INVALID ELEMENT TYPE elmtype FOUND IN SELECT CONTROL CARD.
GIM70725S
GIMIAP PROCESSING HAS FAILED FOR LIBRARY library. THE LIBRARY IS SEQUENTIAL, YET MORE THAN ONE DATA ELEMENT HAS BEEN SELECTED FOR IT.
GIM70726S
GIMIAP PROCESSING HAS FAILED FOR LIBRARY library. IT IS NEITHER A PARTITIONED NOR A SEQUENTIAL DATA SET. THIS IS NOT ALLOWED FOR THE FROMLIB.
GIM70727S
GIMIAP PROCESSING HAS FAILED FOR LIBRARY library. IT HAS A DATA SET ORGANIZATION OF dsorg THAT IS NOT COMPATIBLE WITH THE elmtype ELEMENT TYPE BEING PROCESSED.
GIM70728S
OPERAND operand1 ON CONTROL STATEMENT stmname1 CANNOT BE USED WHEN OPERAND operand2 IS PRESENT ON CONTROL STATEMENT stmname2. THE OPERANDS ARE MUTUALLY EXCLUSIVE.
GIM70729E
THE ELEMENT elmname WAS ALREADY IDENTIFIED IN A PREVIOUS SELECT STATEMENT FOR THE SAME COPY STATEMENT. THIS IS NOT ALLOWED.
GIM70730I
SHELL SCRIPT shellscr PROCESSING FOR elmtype elmname WAS SUCCESSFUL.

Parent topic: SMP/E messages