SI79560 - OSP-BASEDIR-INCORROUT updates for IBM Navigator for i

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5770SS1  V7R3M0    SI79559   NONE     0003
PRE  5770SS1  V7R3M0    SI62116   00/00    0000
PRE  5770SS1  V7R3M0    SI58548   00/00    0000
PRE  5770SS1  V7R3M0    SI58549   00/00    0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
OSP-BASEDIR-INCORROUT updates for IBM Navigator for i

CORRECTION FOR APAR SE77732 :
-----------------------------
OSP-BASEDIR-INCORROUT updates for IBM Navigator for i

CIRCUMVENTION FOR APAR SE77732 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

5. It is recommended to install HTTP group instead of installing
this single PTF

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI73285 :
=================================================

This PTF will enable IBM i Navigator for Java 8. To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

5. It is recommended to install HTTP group instead of installing
this single PTF

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI69810 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI68991 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8
will be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the ADMIN2 job under QHTTPSVR
subsystem before applying PTF:

ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

Note: Make sure that ADMIN2 job ended, then you could go to
next step.
2. Apply or remove this PTF (immediate mode).
3. Start the ADMIN2 job by using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
4. It is highly recommended to clear the browser cache after
applying this PTF.

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

Note: Make sure that QHTTPSVR subsystem ended, then you could go to
next step.

2. Apply or remove this PTF (immediate mode).

3. Start the QHTTPSVR subsystem using:
STRSBS SBSD(QHTTPSVR/QHTTPSVR)

4. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

5. It is highly recommended to clear the browser cache after
applying this PTF.

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.
1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:

ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after
applying this PTF.


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

Before applying this PTF, please ensure HTTP PTF Group SF99722 level 7
(or later) is installed.

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


With this PTF, IBM Navigator for i running on admin2 moves to JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI78477      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI77616      OSP-BASEDIR-INCORROUT IBM Navigator for i Heritage Version
   SI77616      OSP-OTHER-INCORROUT EIM FEATURES NOT DISPLAYING WITHIN NAV F
   SI77616      OSP-BASEDIR-UNPRED PASSWORD WRONG WHEN ACCESS EIM DOMAIN
   SI75352      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI75352      OSP-OTHER-INCORROUT NAVIGATOR FOR I DASHBOARD FAILS WITH UNA
   SI75352      OSP-PERFM RUNTIME ERROR IS DISPLAYED WHEN TRYING TO USE THE
   SI74834      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI74834      JVA-OTHER-UNPRED INTERMITTENT ISSUE WHERE EXPORT OF SPOOLFIL
   SI74834      QIWA2 SYSTEM MONITOR NOT SHOWING DATA
   SI73955      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI73955      Update xml files for PDI
   SI73955      OSP-PAR-940XMISC ONLY A PART TO THE SETTINGS TO ADJUST ARE S
   SI73955      OSP-BASEDIR-INCORROUT NOT ABLE TO CHANGE LMTDEVSSN BY NAVFOR
   SI73955      OSP-OTHER-INCORROUT NAVIGATOR FOR I NOT DISPLAYING ALL GROUP
   SI73285      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI73285      OSP-BASEDIR-UNPRED NAVIGATOR FOR I DASHBOARD AT THE BOTTOM S
   SI73285      OSP-OTHER-INCORROUT NAVIGATOR FOR I MONITORS DO NOT START OR
   SI73285      OSP-OTHER-INCORROUT NAVIGATOR DHCP MONITOR
   SI72015      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI72015      OSP-OTHER NAVIGATOR I DOES NOT SHOW ALL THE FTP SERVER JOBS
   SI72015      OSP-XTND-OTHER-UNPRED SEARCH FILTER TEXT CAN'T BE CLEARED
   SI72015      OSP-OTHER-INCORROUT IBM NAVIGATOR FOR I NETWORK HOST SERVER
   SI72015      OSP-BASEDIR-UNPRED NAVIGATOR FOR I - RSTLIBBRM PROMPT DOES N
   SI72015      OSP-BASEDIR-UNPRED NAVIGATOR FOR I FREQUENTLY MESSAGE PLEASE
   SI72015      OSP-BASEDIR-UNPRED IDS EVENTS DO NOT DISPLAY.
   SI71663      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71663      OSP-BASEDIR-MSGCPF4AC2 PASSWORD DOES NOT MEET ALL PASSWORD R
   SI71663      OSP-BASEDIR-INCORROUT MOVE TO NEW WINDOW
   SI71663      OSP-BASEDIR-UNPRED GO BUTTON FOR COMMAND LIKE DSPJOBLOG DOES
   SI71663      OSP-BASEDIR-UNPRED NAVIGATOR FOR I SHOWS DIFFERENT TIME ON S
   SI71279      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71279      OSP-BASEDIR EIM PASSWORD GETS SET TO "NULL"
   SI70729      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI70729      OSP-BASEDIR-UNPRED NAV FOR I SEND PTF TASK FAILED
   SI70729      OSP-OTHER UNABLE TO REMOVE EXISTING IP ADDRESSES FROM AN EXI
   SI70729      OSP-BASEDIR-UNPRED NAVIGATOR FOR I VARIABLES ARE TRUNCATED W
   SI69810      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI69810      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I DATABASE SCHEMA PO
   SI69810      OSP-BASEDIR-UNPRED RUNTIME ERROR HAS OCCURRED WHEN SELECTING
   SI69810      OSP-BASEDIR-UNPRED DATABASE SECURITY ADMINISTRATOR WITHIN AP
   SI69810      OSP-BASEDIR-UNPRED USER PROFILE GETS DISABLED WHEN USING TAR
   SI69810      OSP-XTND-OTHER-UNPRED SEND PTF PANE FAILS TO LOAD IF BROWSER
   SI69810      OSP-MSGGUIEIMVERIFYFAILS EIM VERIFICATION FAILS IN GUI
   SI69810      OSP-OTHER-MSGCPF3C3A RUNTIME ERROR OCCURRED ON GROUPS IN NAV
   SI69810      OSP-BASEDIR-UNPRED NAVIGATOR FOR I PROMPT RSTOBJ RETURNS MES
   SI69810      OSP-OTHER-INCORROUT RUNTIME ERROR RETURNED FROM NAV FOR I US
   SI69590      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i (L1C)
   SI68991      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI68991      Set dynamic JAVA_HOME for PGM QINAVMNSRV
   SI68991      OSP-OTHER-INCORROUT MONITORS ARE NO LONGER BEING TRIGGERED W
   SI68991      OSP-BASEDIR-UNPRED MESSAGE MONITOR PARAMETERS MSGKEY ENDPOIN
   SI68991      OSP-BASEDIR-UNPRED A TRIGGER COMMAND SPECIFIED IN A MESSAGE
   SI68738      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI68738      OSP-BASEDIR-MSGBRM7003 PROMPTING DUPMEDBRM IN NAVIGATOR FOR
   SI68738      OSP-BASEDIR-MSGCPD70E4 PROMPT CHGJRN COMMAND FROM NAVIGATOR
   SI68738      OSP-PAR-940XCOM JAVA.LANG.NULLPOINTEREXCEPTION ERROR WHEN NA
   SI68738      OSP-BASEDIR-UNPRED STATUS SYSTEM AND MESSAGE MONITOR IN NAVI
   SI68738      OSP-OTHER-UNPRED UNABLE TO MODIFY "DISK STORAGE UTILIZATION"
   SI68738      OSP-BASEDIR-INCORROUT JAVA SCRIPT INJECT XSS ATTACK NAVIGATO
   SI68738      OSP-OTHER CAN'T ADD NONE STANDARD MESSAGE ID TO MESSAGE MONI
   SI68738      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I DOES NOT SHOW CORR
   SI68738      OSP-OTHER-UNPRED NAVIGATOR FOR I - LEFT PANEL BLANK UNTIL LO
   SI67574      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI67574      OSP-BASEDIR-INCORROUT APPLICATION ADMIN WILL NOT LOAD
   SI67574      OSP-BASEDIR-INCORROUT THE INAV SHOWS DIFFERENT DATABASE NAME
   SI67574      OSP-BASEDIR-UNPRED USER PREFERENCES NOT REMEMBERED IN NAVIGA
   SI67574      OSP-MSGADDHOST ADDHOST IN INAV FAILS
   SI66636      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI66636      OSP-UNPRED UPLOAD OF OVERLAY VIA IBM NAVIGATOR FAILS WITH ME
   SI66636      OSP-MSGWRONGCONTENT-PAR-940XCOM WRONG DIRECTORY CONTENT SHOW
   SI66360      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI66360      OSP-BASEDIR-INCORROUT IN THE INAV,USERS WITH *PGMR AUTHORITY
   SI66360      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I NAS MANAGE KEYTAB
   SI66360      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I NOT ALLOWING CONNE
   SI66174      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI65703      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI65703      OSP ACS-NAVIGATOR FOR I-AFP MANAGER NOT ABLE TO BROWSE PC DI
   SI65703      OSP-BASEDIR-UNPRED ACCESSING DISK STATUS REPORTS "SOFTWARE E
   SI65703      HTTPSVR-INCORROUT DATABASES ARE NOT SHOWING IN LEFT PANE OF
   SI65703      QIWA2 NAVIGATOR FOR I WEB INTERFACE DOES NOT ALLOW TO UPDATE
   SI65703      HTTPSVR-INCORROUT WHEN GETS PROMPTED FOR SERVICE TOOLS SIGN-
   SI65703      OSP-PAR-940XBASE BRMS ENTERPRISE STRRCYBRM MISSING ASP PROMP
   SI65703      OSP-BASEDIR-UNPRED "SOFTWARE ERROR" REPORTED WHEN CLICKING O
   SI65703      OSP-INCORROUT FILTER NOT WORKING AS EXPECTED FOR INDEX ADVIS
   SI65703      OSP-BASEDIR-UNPRED NOTHING HAPPENS WHEN SELECTING CENTRAL SE
   SI65703      OSP-PAR-940XMISC APPLICATION ADMINISTRATION PAGE IS BLANK US
   SI65703      Update sql files for PDI Graph History
   SI65703      OSP-OTHER-INCORROUT WHEN USING MULTIPLE FILTER RULES ONLY TH
   SI65703      OSP-BASEDIR-INCORROUT DHCP MONITOR DOESN'T WORK WHEN *IOSYSC
   SI65526      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI64940      OSP-MSGGROUPREGISTRYOPTIONMISSINGFROMEIM GROUP REGISTRY OPTI
   SI64940      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI64940      Update xml & sql files for PDI Graph History
   SI64940      OSP-BASEDIR-INCORROUT NOT ALL SUFFIXES DISPLAY WHEN BROWSING
   SI64940      OSP-INCORROUT NAVIGATOR FOR I PTF COMPARE AND UPDATE FUNCTIO
   SI64940      OSP-XTND EIM MAPPING POLICY IS SHOWING GREYED OUT ON I NAVIG
   SI64940      OSP-BASEDIR-THREADS ERROR OCCURRED WHILE CREATING DOMAIN EIM
   SI64940      OSP-BASEDIR-LOOP MESSAGE MONITOR INTERMITTENTLY GOES INTO A
   SI64940      OSP-BASEDIR-INCORROUT ADMIN2 IS CREATING COOKIES WITHOUT THE
   SI63765      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI63765      Update xml & sql files for PDI Graph History
   SI63765      OSP-OTHER-F/QMHPQSEH-T/QMHPQSEH-MSGCPI2417 MANY CPI2417 MESS
   SI63765      OSP-BASEDIR-INCORROUT SYSTEM OPERATOR MESSAGES ARE NOT SORTI
   SI63577      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI63577      OSP SOME EIM FUNCITONS USING L1C NAVIGATOR FOR I DO NOT WORK
   SI62070      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI62070      Update xml & sql files for PDI Graph History
   SI62070      HTTPSVR-UNPRED UPLOAD FUNCTION IN IBM NAVIGATOR FOR I TO PUT
   SI62070      OSP-BASEDIR-UNPRED SENDING PTFS FAILS WITH "AN ERROR HAS OCC
   SI62070      OSP-XTND-OTHER-INCORROUT CONFIGURING EIM WITH THE GUI USING
   SI62070      OSP-BASEDIR-UNPRED CREATE EIM IDENTIFIER WITH ASSOCIATION TY
   SI61989      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI61989      OSP-BASEDIR-INCORROUT CWWKZ0404E AND CWWKZ0012I MSGS ARE THR
   SI60484      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI59042      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI59042      service entry to service table
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update sql and xml iteration 50 #2
   SI59042      Update sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI58546      Update xml & sql files for PDI
   SI58546      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI58546      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI58546      Update xml & sql files for PDI

Summary Information

IBM i Support