IBM Support

SI78946 - MSGCPIBB10 Cluster administrative domain job does not start

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

MSGCPIBB10 Cluster administrative domain job does not start


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5770SS1  V7R4M0    SI77340   00/00    0000
PRE  5770SS1  V7R4M0    SI71039   00/00    0000
PRE  5770999  V7R4M0    MF99304   00/00    0000
PRE  5770SS1  V7R4M0    SI75011   00/00    0000
CO   5770SS1  V7R4M0    SI74026   00/00    0000
DIST 5770999  V7R4M0    MF67868   00/00    0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
The cluster administrative domain job does not start.  The
joblog for the failed job contains a CPIBB10 exception message
indicating that the QCSTADEXTP cluster resource group exit
program failed.  The name of the job in the CPIBB10 exception
message is QCSTJOBD.
Displaying cluster resource group information for the cluster
administrative domain will show an exit program job name of
*JOBD. This problem may occur when the cluster administrative
domain was created on 6.1 or prior releases.

CORRECTION FOR APAR SE77377 :
-----------------------------
The cluster administrative domain job will successfully start.

CIRCUMVENTION FOR APAR SE77377 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


After the fix has been applied end clustering on all nodes in the
recovery domain of the cluster administrative domain.  After clustering
has been ended on all nodes in the cluster administrative domain, start
clustering again on all the nodes.  If the fix was not applied to all
nodes in the cluster administrative domain, nodes with the fix applied
must be started before nodes without the fix.

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI78870 :
=================================================

1. On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.
2. After the PTF has been applied, you should also restart the
QPRFSYNCH job on every node in your cluster.  You can restart the
QPRFSYNCH job with the following commands:
CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)
3. If the QCST_AD_CREATE or QCST_AD_DELETE cluster policies are
defined, sign off or end any job which may create or delete user
profiles.  After the fix is applied, the jobs can be started or can
sign on again.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI78698 :
=================================================

In order to gain the full benefit of this PTF, after the PTF is applied
perform the following steps on each node where the PTF has been
applied:
1. End clustering on the node.
2. Start clustering on the node.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI78678 :
=================================================

On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI78602 :
=================================================

In order to gain the full benefit of this PTF, after the PTF is applied
perform the following steps on each node in the cluster administrative
domain:
1. End clustering on the node (ENDCLUNOD)
2. Start clustering on the node (STRCLUNOD)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI77962 :
=================================================

Any job which calls the QfpadRtvMonitoredResourceEntry API should be
ended and restarted.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI77493 :
=================================================

It is recommended to sign off or end any user job that may call the
QfpadRtvMonitoredResourceInfo API. After the fix is applied, the job
can be started or can sign on again.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI77451 :
=================================================

On each node in the cluster, apply the fix, end clustering, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI77253 :
=================================================

In order to gain the full benefit of this PTF, after the PTF is applied
perform the following steps on each node in the cluster administrative
domain:
1. End clustering on the node (ENDCLUNOD)
2. End the QPRFSYNCH job (CALL QFPAPRFJ PARM(END))
3. Start the QPRFSYNCH job (CALL QFPAPRFJ PARM(START))
4. Start clustering on the node (STRCLUNOD)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI77024 :
=================================================

In order to gain the full benefit of this PTF, after the PTF is applied
perform the following steps:
1. End clustering on the node (ENDCLUNOD)
2. End the QPRFSYNCH job (CALL QFPAPRFJ PARM(END))
3. Start the QPRFSYNCH job (CALL QFPAPRFJ PARM(START))
4. Start clustering on the node (STRCLUNOD)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI76841 :
=================================================

The QCSTADFIX program should only be used with the direction of IBM
Support.  If directed to do so by IBM Support, the following actions
should be taken after the PTF is installed:

1. If the cluster administrative domain synchronization option has some
value other than *ACTDMN, change the cluster administrative domain
synchronization option to *ACTDMN.
2. End the cluster administrative domain (ENDCAD) and end clustering on
all nodes in the cluster administrative domain (ENDCLUNOD).
3. On each node in the cluster administrative domain issue the
following command: CALL PGM(QSYS/QCSTADFIX) PARM('*FRCENCPWD')
4. Verify that the program runs without error. If any errors are
encountered and it is not immediately obvious how to address the issue
contact IBM Support.  Do not proceed to the next step on any node with
unresolved errors, unless advised to do so by IBM Support.
5. Start clustering (STRCAD) on the node which should be used as the
source node (the node with the most current password values). After
clustering has started start the cluster administrative domain.
6. Start clustering on each of the other nodes in the cluster
administrative domain, one node at a time.  Wait a few minutes after
each node has started to allow the cluster administrative domain to
synchronize objects between the nodes before the next node is started.
7. If the cluster administrative domain synchronization option was
changed in step 1, change the cluster administrative domain
synchronization option back to the previous value.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI76818 :
=================================================

In order to gain the full benefit of this PTF, after the PTF is applied
perform the following steps:
1. End clustering on the node (ENDCLUNOD)
2. End the QPRFSYNCH job (CALL QFPAPRFJ PARM(END))
3. Start the QPRFSYNCH job (CALL QFPAPRFJ PARM(START))
4. Start clustering on the node (STRCLUNOD)

This PTF affects the monitoring of password attributes on user profiles
for the cluster administrative domain.  After this PTF is applied any
job which was started before this PTF was applied will not benefit from
the PTF when a password is updated.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI76689 :
=================================================

On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will not support switchover and
failover monitoring.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI76267 :
=================================================

1. On each node in the cluster, end clustering, apply the fix, and
then
start clustering.  It is not necessary to update all nodes at the
same
time, however, any node without the fix will continue to be a
potential
source of the problem.

2. It is recommended to sign off or end any user job that issued any
cluster command or API. After the fix is applied, the job can be
started or can sign on again.

3. After the PTF has been applied, you should also restart the
QPRFSYNCH job on every node in your cluster.  You can restart the
QPRFSYNCH job with the following commands:

CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI75925 :
=================================================

After this PTF has been applied:
1. End clustering on the node using the ENDCLUNOD command
2. End the QPRFSYNCH job using this command: CALL QFPAPRFJ PARM(END)
3. Start clustering on the node using the STRCLUNOD command

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI75271 :
=================================================

To get full benefit from this PTF end clustering and then start
clustering again on each node where this PTF is installed.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI74406 :
=================================================

After this PTF is installed clustering should be ended and restarted on
the node.  The ENDCLUNOD and STRCLUNOD commands should be used.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI74278 :
=================================================

This PTF contains Service Programs that are activated into the System
Default Activation Group. A new job must be started to activate the
new code.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI72194 :
=================================================

Program QSYS/QCSTADFIX has been enhanced to correct cluster
administrative domain inconsistent global status of user
profiles when upgrading from cluster modification level 2
to 3 which resulted in encrypted password conversion.

Restrictions:
- The program is not allowed to run while cluster resource
services is active
- The caller must have *ALLOBJ authority

It is recommended to:
1. Apply this PTF to all nodes in the cluster.
2. End all CRGs to prevent a failover.
3. End clustering on all nodes in the cluster.
4. Call the program: CALL PGM(QCSTADFIX) PARM(*FIXENCPWD)
on each node in the cluster administrative domain.
Note that the program may take several minutes to complete.
When the program has completed, a summary will be given
indicating how many password attributes were successfully
converted, skipped, or failed. If any warnings or failures
occurred, these will be logged to the joblog of the caller.
5. You may see a CPF9898 message warning "*USRPRF &1 GLOBAL
VALUE FOR PASSWORD ATTRIBUTE IS INCOMPATIBLE FOR ENCRYPTED
PASSWORD CONVERSION". This means that the monitored
resource entry for that user profile was inconsistent
before the cluster modification level increased or there
is a pending change to the user profile.
6. Choose the node with the largest number of successful
password conversions. Start this cluster node first. If
all cluster administrative domain nodes ran the QCSTADFIX
program and reported all successes (no failures or
warnings), then it does not matter which node you choose
to start first.
7. Start all other nodes in the cluster.
8. Start the cluster administrative domain from any node.
9. If no warning or failure messages were present on any
cluster administrative domain nodes after calling the
QCSTADFIX program, then all *USRPRF monitored resource
entries should be consistent after the cluster
administrative domain has completely started.
10. Any user profiles for which a warning or failure message
was sent may still be inconsistent. This can be corrected
by either changing the password of the user profile or
removing the monitored resource entry from the cluster
administrative domain and then adding the monitored
resource entry for this user profile.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI71253 :
=================================================

Before applying this PTF, if the node that this PTF is being installed
on is a member of a cluster administrative domain, ensure that all
nodes in your cluster administrative domain have compatible password
levels.  Password levels 0 and 1 are compatible.  Passwords level 2 and
3 are compatible.  To see the password level for a node display the
QPWDLVL system value.  If this PTF is installed on all nodes in the
cluster administrative domain and the password levels on nodes in the
administrative domain are not compatible, all user profiles in the
cluster administrative domain will be marked as inconsistent.  If this
happens the user profiles cannot be made consistent until all nodes in
the cluster administrative domain are at compatible password levels.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI70313 :
=================================================

Clustering must be ended and restarted on any Cluster node with a REST
Cluster Monitor for the PTF code to be activated.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI69207 :
=================================================

1. On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

2. It is recommended to sign off or end any user job that issued any
cluster command or API. After the fix is applied, the job can be
started or can sign on again.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI74379 :
=================================================

Most customers will not be affected by this change and can ignore these
special instructions.  For customers affected by this change, to get
the change to take effect immediately take the following steps after
the PTF is applied:
1. End clustering on the node where the PTF is applied.
2. Start clustering on the node where the PTF is applied.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI78870      HASM-HA CLUSTER ADMINISTRATIVE DOMAIN TO REMOVE THE *IOSYSCF
   SI78870      Allow cluster policy to be deleted when the associated domai
   SI78698      [INT DR] Notify Db2 Mirror when clustering detects node fail
   SI78678      INCORROUT Cluster switchover and failover should use job que
   SI78602      Retry inconsistent authority list resources when a user prof
   SI78583      Cluster API enhancements
   SI78004      OSP-OTHER-F/RMSLLOCKCHECK-T/QCSTIDX-MSGMCH2601 MCH2601 LOCK
   SI77962      CPFAA0E message from QfpadRtvMonitoredResourceInfo API
   SI77493      OSP-OTHER-UNPRED *ALL PARM MISSING FROM API AT V7R4
   SI77451      IP Address Configuration Object Does Not Vary On/Off Properl
   SI77253      OSP-OTHER-UNPRED QIBM_QSY_CRT_PROFILE EXIT POINT NOT TRIGGER
   SI77253      OSP-OTHER Enhance failover notifications
   SI77162      HASM-HA CRG HANG IN SWITCHOVER PENDING
   SI77162      HASM-HA-WAIT JOB DOING CHGUSRPRF FOR SOME USERS IN ADMINISTR
   SI77024      HASM-HA-INCORROUT DELETE OF OBJECT IN ADMIN DOMAIN FOLLOWED
   SI76841      OSP-OTHER-INCORROUT ENHANCEMENT TO QCSTADFIX PROGRAM.
   SI76818      HASM-HA ADMIN DOMAIN SYNCRONIZE PASSWORD WITH QPWDLVL 2 INCO
   SI76689      Switchover/Failover Progress Monitoring and Notification whe
   SI76544      HASM-HA PASSWORD SET TO *NONE BY ADMIN DOMAIN
   SI76426      OSP-OTHER-UNPRED MRE'S FOR GROUP PROFILES REMAIN INCONSISTEN
   SI76267      HASM-HA JOBS HANGS WHEN RMVCADMRE AND ADDCADMRE IS CALLED WH
   SI76267      Prevent job hang in cluster administrative domain job when c
   SI76267      Fix issues with QCST_CRG_CANCEL_FAILOVER policy
   SI76267      HASM ADMIN DOMAIN PASSWORD CONVERSION TO ENCRYPTED FORMAT FA
   SI76089      OSP-INCORROUT Increase maximum device domain message size
   SI75925      HASM-HA ADMIN DOMAIN ENDED ABNORMALLY CPDBB11 RC4
   SI75925      HASM-HA-INCORROUT ADMIN DOMAIN WILL NOT START, AND MRES NOT
   SI75925      Cluster administrative domain job fails with CPDBB11 RC8
   SI75291      OSP-OTHER-F/QCSTCRGS2-T/QCSTCRGS2-MSGCPF2204 STRCRG HANGS IN
   SI75271      Remove cluster administrative domain checks for QRETSVRSEC s
   SI75271      User profile not created on cluster administrative domain no
   SI75271      Prevent cluster administrative domain errors at CRTCAD time
   SI75174      Minor cluster administrative domain updates
   SI75087      OSP-INCORROUT Improve cluster advanced node failure detectio
   SI75036      Cluster administrative domain improvements
   SI74699      OSP-INCORROUT CHGCLUNODE *CHGSTS does not change status of C
   SI74626      OSP-MSGCHGUSRPRFLCLPWDMGT CHGUSRPRF ON LCLPWDMGT FROM NO TO
   SI74406      Support inconsistent MRE notification
   SI74406      Miscellaneous cluster administrative domain fixes
   SI74406      Enablement for Cluster Modification Level 6
   SI74406      OSP-OTHER Serialize Configuration of Geographic Mirror - Clu
   SI74394      Prevent Admin Domain APIs from being called in the Admin Dom
   SI74278      OSP-INCORROUT-F/QCSTCCUTIL-MSGMCH3601 CFGDEVASP ASPDEV(IASP1
   SI74212      OSP-F/CSTCRGJOB-T/CSTCRGJOB-MSGMCH3601 CLUSTER NODE WILL NOT
   SI74212      INCORROUT Function check MCH0601 during IASP vary on.
   SI74024      OSP-INCORROUT Cluster not always reporting IASP vary on pend
   SI73527      OSP-INCORROUT Improvements in CHGCLURCY command
   SI73436      OSP-OTHER-F/QHACMN-T/QHAWRKCP2-RC7-MSGCPFBBCB ENHANCEMENT TO
   SI73377      CPFBB6C error message when starting device CRG with IP addre
   SI73300      OSP-INCORROUT Miscellaneous CRG Container fixes
   SI73239      OSP-OTHER-F/QCAIFLD-T/QSYUPADOH-MSGCPD2208 ADDCADMRE RESULTS
   SI73171      Support Adding MRE when Node is not Active in Cluster
   SI73138      Improve handling of IP address conflicts when adding device
   SI73137      OSP-OTHER-F/QCAIFLD-T/QSYUPADOH-MSGCPD2208 ADDCADMRE RESULTS
   SI72833      OSP-MSGMCH3601 CRG job may end with MCH3601 when receiving a
   SI72357      MSGMCH3601 Removing last managed CRG in Active container sen
   SI72313      OSP-OTHER-UNPRED PARTIAL PASSWORD ENTRY CONVERSION NOT COMPL
   SI72313      OSP-OTHER-WAIT CLUSTER HANG CONDITION WHEN ENDING A CRG WHEN
   SI72229      OSP-INCORROUT Cluster may hang when changing cluster modific
   SI72194      OSP-OTHER-UNPRED PARTIAL PASSWORD ENTRY CONVERSION NOT COMPL
   SI71872      OSP-INCORROUT Incorrect cluster node status when using CHGCL
   SI71827      OSP-OTHER-WAIT CLUSTER HANG CAUSED BY MISMATCHED ADMINISTRAT
   SI71253      OSP-INCORROUT Add logging to administrative domain
   SI71253      OSP-INCORROUT CRG Container miscellaneous fixes
   SI71253      Add support for IP address configuration objects in device c
   SI71253      OSP-Increase Administrative Domain maximum MRE limit from 45
   SI71253      OSP-Support for replicating Encrypted Password in Cluster Ad
   SI71253      Allow valid IP addresses ending in 255 to be used in the IBM
   SI70313      OSP-INCORROUT HMC REST Cluster Monitor retry if logon fails
   SI70103      Potential security issue
   SI69207      OSP-INCORROUT CHGCRGPRI may fail with hyperswap and global m
   SI70357      OSP-OTHER-F/QHACMN-RC1-MSGCPDBB01 MSGCPDBB01 ENCOUNTERED DUR
   SI70276      OSP-OTHER-F/STRINGHIGHUSE4K-T/QCSTADCMN-MSGMCH0601 MSGMCH060
   SI70045      HASM-HA-F/CSTADCHGS-T/CSTADCHGS-MSGCPF1059 QAUDLVL SET WITH
   SI70047      Remove support for *TRNLIN resource type and obsolete *ETHLI
   SI69699      Cluster related fixes for 7.4
   SI69372      Cluster related fixes for 7.4
   SI74379      Admin Domain job fails with CPFBB47 reason code 1600

Summary Information

System..............................  i
Models..............................  
Release.............................  V7R4M0
Licensed Program....................  5770SS1
APAR Fixed..........................  View details for APAR SE77377
Superseded by:......................  View fix details for PTF SI79846
Recompile...........................  N
Library.............................  QSYS
MRI Feature ........................  NONE
Cum Level...........................  C2125740


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.4.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770SS1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
13 June 2022