IBM Support

SI78289 - BRM-MAINT-INCORROUT Fixes - June 2022

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

BRM-MAINT-INCORROUT Fixes - June 2022


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.

Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS wiki:
https://ibm.biz/ibmi-brms

Fixes in this PTF:
1. In 7.3 and later, parallel backups may report message
MSGMCH0601.
2. In 7.3 and later, RSTOBJBRM(*ALL) may not restore all the
objects which were backed up beginning with the valid naming
character $.
3. In 7.3 and later, DLTLICPGM 5770BR1 fails with message
MSGCPF2407.
4. In 7.3 and later, the function to force an IPL when the
control group ends with MSGCPF1099 using data area Q1AIPLSUB did
not IPL when using the control group attribute IPL after backup
*NO.
5. In 7.3 and later, control group QNFSIPLFUL and QNFSIPLINC
fail to backup the image catalog directories correctly using the
control group attribute IPL after backup *YES.
6. In 7.3 and later, control group backup with *LINK or link
lists fails with MSGBRM2330 RC3525.
7. In 7.3 and later, the missed object policy generates an
invalid missed objects link list when more than 300 IFS objects
fail during the backup.
8. In 7.3 and later, BRMS recovery report has been enhanced to
provide improved reporting for H/A environments.  This support
will provide a way to generate a single BRMS recovery report
using tapes from your backup and production systems in an H/A
environment. See the BRMS wiki for more information at
https://ibm.biz/brms-enhancements.
9. In 7.3 and later, BRMS using IBM Cloud Storage for i has been
enhanced to improve BRMS network support.  The purpose of this
support is to ensure duplicate volume names are not generated
when any system in the BRMS network is in restricted state or
when the BRMS network synchronization job is not working.  See
the BRMS wiki for more information at
https://ibm.biz/brms-enhancements.
10. In 7.3 and later, BRMS has been enhanced with new SQL
services for the BRMS log message distribution and log omits,
media library management, and backup control group information.
See the BRMS wiki for more information at
https://ibm.biz/brms-sqlservices.
11. In 7.3 and later, BRMS has been enhanced to migrate control
groups with GUI object omits to use object list omits.
This function can be enabled before using WRKCTLGBRM *BKU option
3 (Copy), it is not the default behavior.
To Enable:
CALL QBRM/Q1AOLD PARM('SETUPFUN' '*SET' 'Q1AMGROMIT' '*SYS')
which enables the function for all BRMS backups.
CALL QBRM/Q1AOLD PARM('SETUPFUN' '*SET' 'Q1AMGROMIT' '*JOB')
which enables the function for the current signed on job only.
The Create Control Group Based On (Q1ACRTCGBO) API also has a
new optional parameter to migrate to use object list omits.
See the BRMS wiki for more information at
https://ibm.biz/brms-enhancements.
12. In 7.3, enhancements have been made to change the GUI only
control group attributes for Allow activity overrides, Allow
retention overrides, Lotus servers, Integrated Windows servers,
and Guest partitions. See the BRMS wiki for more information at
https://ibm.biz/brms-enhancements

CORRECTION FOR APAR SE76798 :
-----------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.
Note:  ending the http admin servers may affect other non-BRMS
users.

From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

CIRCUMVENTION FOR APAR SE76798 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI77381 :
=================================================

All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI77381      BRM-MAINT-INCORROUT Fixes - December 2021
   SI76737      BRM-MAINT-INCORROUT Fixes - September 2021
   SI76514      BRM-MAINT-INCORROUT Fixes - June 2021
   SI75083      BRM-MAINT INCORROUT Fixes - March 2021
   SI74478      BRM-MAINT INCORROUT Fixes - December 2020
   SI73677      BRM-MAINT INCORROUT Fixes - September 2020
   SI72866      BRM-MAINT INCORROUT Fixes - June 2020
   SI73048      BRM-MAINT-PERFM WHEN INSTALLING PTF SI71974 FOR R730 BRMS, T
   SI71974      BRM-MAINT-INCORROUT Fixes March 2020
   SI71875      BRM-MAINT INCORROUT Fixes - January 2020
   SI71133      BRM-MAINT INCORROUT Fixes - December 2019
   SI70625      BRM-MAINT INCORROUT Fixes - September 2019
   SI70367      BRM-MAINT INCORROUT Fixes - July 2019
   SI69390      BRM-MAINT-INCORROUT Fixes - June 2019
   SI68856      BRM-MAINT-INCORROUT Fixes - March 2019
   SI68846      BRM-MAINT-INCORROUT Fixes - December 2019
   SI68568      BRM-MAINT-INCORROUT Fixes - December 2018
   SI68073      BRM-MAINT-INCORROUT Fixes - September 2018
   SI67946      BRM-MAINT-INCORROUT Fixes - June 2018
   SI67314      BRM-MAINT-INCORROUT Fixes - June 2018
   SI66900      BRM-MAINT-INCORROUT Fixes - March 2018
   SI66286      BRM-MAINT-INCORROUT Fixes-Dec 2017
   SI65676      BRM-MAINT-INCORROUT Fixes-Sept 2017
   SI64250      BRM-MAINT-INCORROUT Fixes-June 2017
   SI64276      BRM-BACKUP-MSGBRM4106 - REQUESTED FUNCTION NOT CORRECT
   SI63720      BRM-MAINT-INCORROUT Fixes-Mar 2017
   SI63592      BRM-MAINT-MSGBRM6714 STRMNTBRM LOOPS WITH CORRUPT BRM6714 ME
   SI63086      BRM-MAINT-INCORROUT Fixes-Dec 2016
   SI61153      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI61153      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI59997      BRM-MAINT-INCORROUT Fixes-June 2016
   SI60601      BRM-RECOVERY-THREADS-MSGCPF3878C BRMS RESTORE FROM PARALLEL
   SI57903      BRM-MAINT-INCORROUT Fixes-March 2016
   SI57903      BRM-MAINT-INCORROUT Fixes-Dec 2015

Summary Information

System..............................  i
Models..............................  
Release.............................  V7R3M0
Licensed Program....................  5770BR1
APAR Fixed..........................  View details for APAR SE76798
Superseded by:......................  
Recompile...........................  N
Library.............................  QBRM
MRI Feature ........................  NONE
Cum Level...........................  NONE


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.3.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770BR1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
18 May 2022