SI77618 - OSP-BASEDIR-INCORROUT IBM Navigator for i Heritage Version

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5770SS1  V7R2M0    SI75348   NONE     0003
PRE  5770SS1  V7R2M0    SI56828   NONE     0003
PRE  5770SS1  V7R2M0    SI56831   NONE     0003
PRE  5770SS1  V7R2M0    SI57344   NONE     0003
CO   5770SS1  V7R2M0    SI51768   NONE     0003



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------

CORRECTION FOR APAR SE76569 :
-----------------------------
Note: this is the last planned Service Pack of IBM Navigator for
i Heritage Version, in which we deliver issue fixes that were
committed to clients.
It is recommended all future usage of IBM Navigator for i
leverage the update interface. Details can be found at:
https://www.ibm.com/support/pages/node/6483299

CIRCUMVENTION FOR APAR SE76569 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

5. It is recommended to install HTTP group instead of installing
this single PTF

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI73958 :
=================================================

This PTF will enable IBM i Navigator for Java 8. To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

5. It is recommended to install HTTP group instead of installing
this single PTF

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI69823 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI67576 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8
will be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the ADMIN2 job under QHTTPSVR
subsystem before applying PTF:

ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

Note: Make sure that ADMIN2 job ended, then you could go to
next step.

2. Apply or remove this PTF (immediate mode).
3. Start the ADMIN2 job by using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
4. It is highly recommended to clear the browser cache after
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI66715 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

Note: Make sure that QHTTPSVR subsystem ended, then you could go to
next step.

2. Apply or remove this PTF (immediate mode).

3. Start the QHTTPSVR subsystem using:
STRSBS SBSD(QHTTPSVR/QHTTPSVR)

4. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

5. It is highly recommended to clear the browser cache after
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI66364 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:

ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after
applying this PTF.


1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


Before applying this PTF, please ensure HTTP PTF Group SF99713 level 20
(or later) is installed.

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


With this PTF, IBM Navigator for i running on admin2 moves to JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


With this PTF, IBM Navigator for i running on admin2 moves to JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI75349      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI74836      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI73958      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI73958      Update xml files for PDI
   SI73286      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI72025      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI71665      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71281      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI70731      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI69823      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI69799      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i (L1C)
   SI68989      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI68989      Set dynamic JAVA_HOME for PGM QINAVMNSRV
   SI68740      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI68740      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I DOES NOT SHOW CORR
   SI68740      OSP-OTHER-UNPRED UNABLE TO MODIFY "DISK STORAGE UTILIZATION"
   SI68740      OSP-BASEDIR-INCORROUT JAVA SCRIPT INJECT XSS ATTACK NAVIGATO
   SI68740      OSP-INCORROUT NAVIGATOR FOR I AFP MANAGER / PAGE SEGMENT / I
   SI67576      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI67576      OSP-BASEDIR-UNPRED USER PREFERENCES NOT REMEMBERED IN NAVIGA
   SI67576      OSP-MSGADDHOST ADDHOST IN INAV FAILS
   SI66715      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI66715      OSP-UNPRED UPLOAD OF OVERLAY VIA IBM NAVIGATOR FAILS WITH ME
   SI66715      OSP-MSGWRONGCONTENT-PAR-940XCOM WRONG DIRECTORY CONTENT SHOW
   SI66364      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI66364      OSP-BASEDIR-INCORROUT IN THE INAV,USERS WITH *PGMR AUTHORITY
   SI66364      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I NAS MANAGE KEYTAB
   SI66364      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I NOT ALLOWING CONNE
   SI66085      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI65704      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI65704      QIWA2 NAVIGATOR FOR I WEB INTERFACE DOES NOT ALLOW TO UPDATE
   SI65704      HTTPSVR-INCORROUT WHEN GETS PROMPTED FOR SERVICE TOOLS SIGN-
   SI65704      OSP-BASEDIR-UNPRED "SOFTWARE ERROR" REPORTED WHEN CLICKING O
   SI65704      OSP-BASEDIR-UNPRED ACCESSING DISK STATUS REPORTS "SOFTWARE E
   SI65704      HTTPSVR-INCORROUT DATABASES ARE NOT SHOWING IN LEFT PANE OF
   SI65704      OSP-INCORROUT FILTER NOT WORKING AS EXPECTED FOR INDEX ADVIS
   SI65704      OSP-PAR-940XMISC APPLICATION ADMINISTRATION PAGE IS BLANK US
   SI65704      OSP-PAR-940XBASE BRMS ENTERPRISE STRRCYBRM MISSING ASP PROMP
   SI65704      OSP-OTHER-INCORROUT WHEN USING MULTIPLE FILTER RULES ONLY TH
   SI65704      OSP-BASEDIR-INCORROUT DHCP MONITOR DOESN'T WORK WHEN *IOSYSC
   SI65527      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI64941      OSP-BASEDIR-INCORROUT NOT ALL SUFFIXES DISPLAY WHEN BROWSING
   SI64941      OSP-XTND EIM MAPPING POLICY IS SHOWING GREYED OUT ON I NAVIG
   SI64941      OSP-BASEDIR-THREADS ERROR OCCURRED WHILE CREATING DOMAIN EIM
   SI64941      OSP-MSGGROUPREGISTRYOPTIONMISSINGFROMEIM GROUP REGISTRY OPTI
   SI64941      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI64941      OSP-BASEDIR-LOOP MESSAGE MONITOR INTERMITTENTLY GOES INTO A
   SI64941      OSP-INCORROUT NAVIGATOR FOR I PTF COMPARE AND UPDATE FUNCTIO
   SI64941      OSP-BASEDIR-INCORROUT ADMIN2 IS CREATING COOKIES WITHOUT THE
   SI63766      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI63766      OSP-BASEDIR-INCORROUT SYSTEM OPERATOR MESSAGES ARE NOT SORTI
   SI63579      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI63579      OSP SOME EIM FUNCITONS USING L1C NAVIGATOR FOR I DO NOT WORK
   SI62073      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI62073      HTTPSVR-UNPRED UPLOAD FUNCTION IN IBM NAVIGATOR FOR I TO PUT
   SI62073      OSP-BASEDIR-INCORROUT WEBADMIN FUNCTION "VIEW AS PDF" IS NOT
   SI62073      OSP-BASEDIR-UNPRED SENDING PTFS FAILS WITH "AN ERROR HAS OCC
   SI62073      OSP-XTND-OTHER-INCORROUT CONFIGURING EIM WITH THE GUI USING
   SI61990      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI61990      OSP-BASEDIR-INCORROUT CWWKZ0404E AND CWWKZ0012I MSGS ARE THR
   SI60247      OSP-INCORROUT COMMAND PROMPTER NOT DISPLAYING ELEMENTS.
   SI60247      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI60247      OSP-BASEDIR YOU ARE NOT AUTHORIZED TO PERFORM THIS OPERATION
   SI60247      OSP-BASEDIR-UNPRED COULD NOT SET MODEM PROFILE WHILE CREATE
   SI60247      OSP-XTND-OTHER-MSGCPF35BE SEND PTF WIZARD FUNCTION FROM THE
   SI60247      OSP-BASEDIR-UNPRED PARAMETER &ENDPOINT DOESN'T REFLECT THE "
   SI60247      OSP-PAR IBM DIRECTOR NAVIGATOR ENTERPRISE IDENTITY MAPPING E
   SI60247      OSP-BASEDIR ADMIN INAV TO CONFIGURE NETWORK AUTHENTICATION T
   SI60247      CA400EXP-OPNAV-OUTPUT-INCORROUT-PRT CAN NOT EXPORT IPDS SPOO
   SI60149      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI59070      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI59070      OSP-BASEDIR-INCORROUT Add a program to add service entry to
   SI59070      HTTPSVR-UNPRED ENABLE TLSV1.2 FOR HTTPADMIN PORT 2005
   SI59070      SP/RCHMGR-UNABLETOSHOWMULTIPLELEVELS UNABLE TO DISPLAY MULTI
   SI58218      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI56747      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI56747      OSP-MSGLANGUAGEISSUE INAVIGATOR FOR I GUI SCREENS JAPANESE I
   SI56747      OSP-BASEDIR-UNPRED INAV - APPLICATION ADMINISTRATION SHOWS N
   SI56747      OSP DHCP MONITOR UNDER ISDN DOESN'T SHOW ANY SUBNET
   SI53771      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI53771      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI53521      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI52843      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI51789      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI51508      OSP-BASEDIR-INCORROUT IBM Navigator for i

Summary Information

IBM i Support