SI77382 - BRM-MAINT-INCORROUT Fixes - December 2021

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.

Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS wiki:
https://ibm.biz/ibmi-brms

Fixes in this PTF:
1. In 7.3 and later, WRKMEDIBRM restores of library objects may
not create the requested restore *OUTFILE set in the recovery
policy.
2. In 7.3 and later, BRMS parallel backups of an object list
using more than 4 stand-alone parallel devices may fail with
MSGSQL0100 and MSGCPF6708.
3. In 7.3 and later, BRMS turnkey created virtual device
descriptions are not refreshed by the command INZBRM
OPTION(*DEVICE) when they are no longer in use.
4. In 7.3 and later, BRMS append volume selection has been
enhanced to select volumes having the same media policy
retention requested by the backup.
5. In 7.3 and later, BRMS has been enhanced with SQL services
that provide a view of the control group backup status.
6. In 7.3 and later, BRMS has been enhanced to manage BRMS SQL
services during FlashCopy processing.
7. In 7.3 and later, email notifications may not be sent when
using the BRMS 'from address' function with installed national
language versions other than English.

CORRECTION FOR APAR 'SE76216' :
-------------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.
Note:  ending the http admin servers may affect other non-BRMS
users.

From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


CIRCUMVENTION FOR APAR 'SE76216' :
----------------------------------
None.


Activation Instructions

None.




Special Instructions


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI76738      BRM-MAINT-INCORROUT Fixes - September 2021
   SI76515      BRM-MAINT-INCORROUT Fixes - June 2021
   SI75084      BRM-MAINT INCORROUT Fixes - March 2021
   SI74479      BRM-MAINT INCORROUT Fixes - December 2020
   SI73678      BRM-MAINT INCORROUT Fixes - September 2020
   SI72867      BRM-MAINT INCORROUT Fixes - June 2020
   SI71975      BRM-MAINT-INCORROUT Fixes March 2020
   SI71876      BRM-MAINT INCORROUT Fixes - January 2020
   SI71134      BRM-MAINT INCORROUT Fixes - December 2019
   SI70626      BRM-MAINT INCORROUT Fixes - September 2019
   SI70368      BRM-MAINT INCORROUT Fixes - July 2019
   SI69391      BRM-MAINT-INCORROUT Fixes - June 2019
   SI69135      BRM-MAINT-INCORROUT Fixes - March 2019
   SI68575      BRM-MAINT-INCORROUT Fixes - 7.4 PTF for NLV Translation

Summary Information
System..............................  i
Models..............................  
Release.............................  V7R4M0
Licensed Program....................  5770BR1
APAR Fixed..........................  View details for APAR SE76216
Superseded by:......................  View fix details for PTF SI78290
Recompile...........................  N
Library.............................  QBRM
MRI Feature ........................  NONE
Cum Level...........................  C2125740

IBM i Support