IBM Support

SI76738 - BRM-MAINT-INCORROUT Fixes - September 2021

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

BRM-MAINT-INCORROUT Fixes - September 2021


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.

Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS wiki:
ibm.biz/ibmi-brms

Fixes in this PTF:
1. In 7.3 and later, BRMS has been enhanced to support Digital
Certificate Manager (DCM) environments when doing cloud disaster
recovery using BRMS with IBM Cloud Storage Solutions for i.
2. In 7.3 and later, BRMS has been enhanced to support parallel
backup and restores when using IBM Cloud Storage Solutions for
i.
3. In 7.3 and later, BRMS has been enhanced to support full
system FlashCopy when using IBM Cloud Storage Solutions for i.
4. In 7.3 and later, spooled file backups may fail with message
MSGMCH1210.
5. In 7.3 and later, BRMS support for Ultrium 9 (LTO9) tape
drives and media has been added.
6. In 7.3 and later, DUPMEDBRM with SBMOPT(*YES) has been
enhanced to delay when submitting multiple jobs to prevent
volume selection collisions.
7. In 7.3 and later, BRMS batch restores may fail with message
MSGCPF0001.
8. In 7.3 and later, the recovery report process was changed to
remove an incorrect instruction to set the Allow object
differences to *NONE or *FILELVL.

CORRECTION FOR APAR 'SE75804' :
-------------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.
Note:  ending the http admin servers may affect other non-BRMS
users.

From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

CIRCUMVENTION FOR APAR 'SE75804' :
----------------------------------
None.


Activation Instructions

None.




Special Instructions


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM Navigator for i (web browser).

Enable the BRMS plug-in for the IBM Navigator for i.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI76515      BRM-MAINT-INCORROUT Fixes - June 2021
   SI75084      BRM-MAINT INCORROUT Fixes - March 2021
   SI74479      BRM-MAINT INCORROUT Fixes - December 2020
   SI73678      BRM-MAINT INCORROUT Fixes - September 2020
   SI72867      BRM-MAINT INCORROUT Fixes - June 2020
   SI71975      BRM-MAINT-INCORROUT Fixes March 2020
   SI71876      BRM-MAINT INCORROUT Fixes - January 2020
   SI71134      BRM-MAINT INCORROUT Fixes - December 2019
   SI70626      BRM-MAINT INCORROUT Fixes - September 2019
   SI70368      BRM-MAINT INCORROUT Fixes - July 2019
   SI69391      BRM-MAINT-INCORROUT Fixes - June 2019
   SI69135      BRM-MAINT-INCORROUT Fixes - March 2019
   SI68575      BRM-MAINT-INCORROUT Fixes - 7.4 PTF for NLV Translation

Summary Information

System..............................i
Models..............................
Release.............................V7R4M0
Licensed Program...............5770BR1
APAR Fixed..........................View details for APAR SE75804
Superseded by:......................View fix details for PTF SI77382
Recompile...........................N
Library.............................QBRM
MRI Feature ........................NONE
Cum Level...........................NONE


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.4.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770BR1","Edition":"","Line of Business":{"code":"LOB08","label":"Cognitive Systems"}}]

Document Information

Modified date:
13 December 2021