SI76181 - OSP-INCORROUT HISTORICAL DATA NOT CREATED

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5770SS1  V7R3M0    SI64970   00/00    0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
Historical data is not created when Collection Services
collection profile is set to *STANDARD.

CORRECTION FOR APAR SE75230 :
-----------------------------
Historical data is created when Collection Services collection
profile is set to *STANDARD.

CIRCUMVENTION FOR APAR SE75230 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI75846 :
=================================================

After applying or removing this PTF, Collection Services must be
ended and restarted for the change to take effect.

1. To end Collection Services, run the following command from the
command line:
ENDPFRCOL FRCCOLEND(*YES)

2. To restart Collection Services, run the following command from the
command line:
STRPFRCOL

Before restarting Collection Services, you should consider other
functions that may be using data provided by Collection Services.
Such functions may be impacted when Collection Services is ended. Error
messages may be produced and the affected functions may need to be
restarted.

Examples of functions that are dependent on Collection Services include
Management Central monitors and applications that use the performance
collector APIs QPMWKCOL and QPMLPFRD. If applications are using the
performance collector APIs, you will find server jobs QPMASERV and
QPMACLCT active on your system.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI74686 :
=================================================

After applying or removing this PTF the Collection Services collector
job (QYPSPFRCOL) must be ended and restarted for the change to take
effect.

1. To end Collection Services enter the following on the command
line:
ENDPFRCOL FRCCOLEND(*YES)

2. To start Collection Services enter the following on the command
line:
STRPFRCOL

Before restarting Collection Services, you should consider other
functions that may be using data provided by Collection Services. Such
functions may be impacted when Collection Services is ended. Error
messages may be produced and the affected functions may need to be
restarted.

Examples of functions that are dependent on Collection Services include
Management Central monitors and applications that use the performance
collector APIs QPMWKCOL and QPMLPFRD. If applications are using the
performance collector APIs, you will find server jobs QPMASERV and
QPMACLCT active on your system.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI68772 :
=================================================

After applying or removing this PTF, Collection Services and any
applications that use the performance collector APIs QPMWKCOL and
QPMLPFRD must be ended and then restarted for the change to take
effect.

1. End any applications using the performance collector APIs QPMWKCOL
and QPMLPFRD.
Note: Make sure that jobs QPMACLCT and QPMASERV are no longer
running.

2. End Collection Services by entering the following on the command
line:
ENDPFRCOL FRCCOLEND(*YES)

3. Rebuild the collection table:
CALL QPMCCRBD PARM('*ALL      ' x'00000000' '<Name of configured
collection library>')
The first parameter, *ALL, must have a length of 10 characters (pad the
end with blanks).
The third parameter, the name of the configured collection library,
must also have a length of 10 characters (pad the end with blanks).
The name of the configured collection library can be displayed by
running the command CFGPFRCOL and hitting F4.

4. Restart Collection Services by entering the following on the
command line:
STRPFRCOL

5. Restart any applications using the performance collector APIs
QPMWKCOL and QPMLPFRD.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI65164 :
=================================================

After applying or removing this PTF, Collection Services and any
applications that use the performance collector APIs QPMWKCOL and
QPMLPFRD must be ended and then restarted for the change to take
effect.

1. End any applications using the performance collector APIs QPMWKCOL
and QPMLPFRD.
Note: Make sure that jobs QPMACLCT and QPMASERV are no longer
running.

2. End Collection Services by entering the following on the command
line:
ENDPFRCOL FRCCOLEND(*YES)

3. Restart Collection Services by entering the following on the
command line:
STRPFRCOL

4. Restart any applications using the performance collector APIs
QPMWKCOL and QPMLPFRD.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI60031 :
=================================================

After applying or removing this PTF the Management Central server job
(QYPSJSVR) must be ended and restarted for the change to take effect.

1. To end the Management Central server job, enter the following on
the command line:
ENDTCPSVR SERVER(*MGTC)

2. To start the Management Central server job, enter the following
on the command line:
STRTCPSVR SERVER(*MGTC)


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI75846      OSP-INCORROUT-Collection Services automatic restart
   SI74686      OSP-INCORROUT Collection Services collection expiration
   SI74422      OSP-INCORROUT Historical Data retention periods
   SI73895      OSP-INCORROUT *MGTCOL IN QMGTC2 NOT DELETED WHEN EXPIRED
   SI71570      OSP-INCORROUT Historical Data not created
   SI71570      OSP-INCORROUT Expired Historical Data fix
   SI68772      OSP-INCORROUT Collection Services expiration times
   SI65164      OSP-OTHER Support for Alerts for IBM i System Limits
   SI64293      OSP-INCORROUT Manage Collections missing *CSFILE collections
   SI62948      OSP-MSGCPF5009, CPF5034, SQL0803 IN JOB QYPSPFRHST
   SI62948      OSP-INCORROUT Historical data failing for expired objects
   SI60031      OSP-INCORROUT Management Central Graph History data missing
   SI59994      OSP-INCORROUT Historical data for *ACTIVE collection
   SI59885      OSP-INCORROUT Historical Performance Data
   SI59023      OSP THE SYSTEM MONITOR DATA SHOULD BE DELETED BY QYPSPFRCOL

Summary Information

IBM i Support