SI73954 - OSP-BASEDIR-INCORROUT updates for IBM Navigator for i

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------

CORRECTION FOR APAR SE74125 :
-----------------------------

CIRCUMVENTION FOR APAR SE74125 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


This PTF will enable IBM i Navigator for Java 8. To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

5. It is recommended to install HTTP group instead of installing
this single PTF

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI69809 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI67573 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.
1. Enter the following command to stop the ADMIN2 job under QHTTPSVR
subsystem before applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
Note: Make sure that ADMIN2 job ended, then you could go to
next step.
2. Apply or remove this PTF (immediate mode).
3. Start the ADMIN2 job by using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
4. It is highly recommended to clear the browser cache after
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI66637 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

Note: Make sure that QHTTPSVR subsystem ended, then you could go to
next step.

2. Apply or remove this PTF (immediate mode).

3. Start the QHTTPSVR subsystem using:
STRSBS SBSD(QHTTPSVR/QHTTPSVR)

4. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

5. It is highly recommended to clear the browser cache after
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI66361 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI64939 :
=================================================

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI63578 :
=================================================

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI62071 :
=================================================

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI58547 :
=================================================

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI73281      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI72014      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71662      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71280      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI70728      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI69809      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI69589      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i (Commo
   SI68990      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI68737      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI67573      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI66637      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI66361      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI65525      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI64939      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI63578      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI62071      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI62071      Create obi files for cs_delta_61.pml and cs_delta_71.pml
   SI60483      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI59043      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI58547      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i

Summary Information

IBM i Support