IBM Support

SI73677 - BRM-MAINT INCORROUT Fixes - September 2020

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

BRM-MAINT INCORROUT Fixes - September 2020


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.

Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS wiki:
ibm.biz/ibmi-brms

Fixes in this PTF:
1. In 7.2 and later, BRMS expected logical files are missing
from QUSRBRM after an upgrade to a new release.
2. In 7.2 and later, cloud full system recovery incorrectly sets
user *PUBLIC with *EXCLUDE authority for the directories in the
BRMS shipped QCLDIPL *LNK list.
3. In 7.2 and later, cloud and automatic virtual backups to
optical that append, may fail with messages MSGOPT2500 and
MSGOPT1321 when the backup spans multiple volumes.
4. In 7.2 and later, RSTLIBBRM may restore the wrong library if
more than 9,999,999 records exist in the history file.
5. In 7.2 and later, the sync job will not process any more
entries until the Q1ABRMNET subsystem is restarted.
6. In 7.2 and later, BRMS has been enhanced to provide SQL
services to view, order, and subset BRMS media.
7. In 7.2 and later, when restoring from a parallel backup, BRMS
incorrectly attempts to restore the *CUM before the *FULL
backup.
8. In 7.2 and later, BRMS created outfiles with the prefix
q1asav in directory '/tmp/brms' are not removed.
9. In 7.2 and later, BRMS move policy has been enhanced to
support the movement of full volumes to a new location.
10. In 7.2 and later, STRMNTBRM with parameter PRTRCYRPT(*ALL)
or PRTRCYRPT(*SAVEXCP) was enhanced to log message MSGBRM1571 in
the BRMS log with severity 0 if zero objects were not saved.
11. In 7.2 and later, WRKOBJBRM has been enhanced with a START()
parameter to specify which saved objects entries to display
first.
12. In 7.3 and later, DSPASPBRM reports the wrong IASP
utilization information while an IASP is being varied off.

CORRECTION FOR APAR 'SE73863' :
-------------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser).

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

CIRCUMVENTION FOR APAR 'SE73863' :
----------------------------------
None.


Activation Instructions

None.




Special Instructions

All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser).
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM System Director Navigator for i5/OS (web browser)

or System k Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for

i5/OS.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS jobs must be ended before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS jobs must be ended before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Please end all BRMS jobs before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI72866      BRM-MAINT INCORROUT Fixes - June 2020
   SI73048      BRM-MAINT-PERFM WHEN INSTALLING PTF SI71974 FOR R730 BRMS, T
   SI71974      BRM-MAINT-INCORROUT Fixes March 2020
   SI71875      BRM-MAINT INCORROUT Fixes - January 2020
   SI71133      BRM-MAINT INCORROUT Fixes - December 2019
   SI70625      BRM-MAINT INCORROUT Fixes - September 2019
   SI70367      BRM-MAINT INCORROUT Fixes - July 2019
   SI69390      BRM-MAINT-INCORROUT Fixes - June 2019
   SI68856      BRM-MAINT-INCORROUT Fixes - March 2019
   SI68846      BRM-MAINT-INCORROUT Fixes - December 2019
   SI68568      BRM-MAINT-INCORROUT Fixes - December 2018
   SI68073      BRM-MAINT-INCORROUT Fixes - September 2018
   SI67946      BRM-MAINT-INCORROUT Fixes - June 2018
   SI67314      BRM-MAINT-INCORROUT Fixes - June 2018
   SI66900      BRM-MAINT-INCORROUT Fixes - March 2018
   SI66286      BRM-MAINT-INCORROUT Fixes-Dec 2017
   SI65676      BRM-MAINT-INCORROUT Fixes-Sept 2017
   SI64250      BRM-MAINT-INCORROUT Fixes-June 2017
   SI64276      BRM-BACKUP-MSGBRM4106 - REQUESTED FUNCTION NOT CORRECT
   SI63720      BRM-MAINT-INCORROUT Fixes-Mar 2017
   SI63592      BRM-MAINT-MSGBRM6714 STRMNTBRM LOOPS WITH CORRUPT BRM6714 ME
   SI63086      BRM-MAINT-INCORROUT Fixes-Dec 2016
   SI61153      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI61153      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI59997      BRM-MAINT-INCORROUT Fixes-June 2016
   SI60601      BRM-RECOVERY-THREADS-MSGCPF3878C BRMS RESTORE FROM PARALLEL
   SI57903      BRM-MAINT-INCORROUT Fixes-March 2016
   SI57903      BRM-MAINT-INCORROUT Fixes-Dec 2015

Summary Information

System..............................i
Models..............................
Release.............................V7R3M0
Licensed Program...............5770BR1
APAR Fixed..........................View details for APAR SE73863
Superseded by:......................View fix details for PTF SI77381
Recompile...........................N
Library.............................QBRM
MRI Feature ........................NONE
Cum Level...........................C0310730


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.3.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770BR1","Edition":"","Line of Business":{"code":"LOB08","label":"Cognitive Systems"}}]

Document Information

Modified date:
13 December 2021