IBM Support

SI72865 - BRM-MAINT INCORROUT Fixes - June 2020

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

BRM-MAINT INCORROUT Fixes - June 2020


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.

Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS wiki:
ibm.biz/ibmi-brms

Fixes in this PTF:
1. In 7.2 and later, ENDOPT(*UNLOAD) does not eject media for
optical devices.
2. In 7.2 and later, after running STRMNTBRM for backups using
the cloud retain media option, cloud restores fail with
MSGCPD4076 and MSGCPF3780.
3. In 7.2 and later, SAVSYSBRM using parameter DEV(*MEDCLS)
fails with message MSGCPD0078.
4. In 7.2 and later, performing a second backup to auto virtual
tape after running a parallel backups using auto virtual tape
media policy QAVVRTTAP and DUPMEDBRM of those virtual tapes may
produce a loop in the second backup.
5. In 7.2 and later, copying a control group to the same name on
the local systems with overwrite *YES incorrectly clears the
control group entries.
6. In 7.2 and later, BRMS changed the sync job to reduce the
amount of time there are locks on the networked related files to
help prevent locks while running STRMNTBRM with parameter
RGZBRMDB(*YES).
7. In 7.2 and later, BRMS has been enhanced to allow the
following values for IFS Backup Control Group Entries on the
Save While Active attribute: *ALWCKWR, *ALWCKSY, *LNKALL,
*LNKALLS.
8. In 7.2 and later, doing a remote multi-library restore from a
parallel save may incorrectly skip restoring 1 of the libraries.
9. In 7.2 and later, CHGMEDBRM incorrectly allows a volume
marked for duplication to be expired by changing the expiration
date.
10. In 7.2 and later, virtual volume cloud transfers that fail
with message MSGICC0004 and MSGCPF9897 incorrectly leave the
volume in *TRF status.
11. In 7.2 and later, when the CRTLIB command defaults are
changed for the ASPDEV parameter, BRMS operations may fail with
messages MSGCPF0001, MSGCPF4102 RC6, MSGRNX1211, MSGRNQ1211, and
MSGRNQ2002.
12. In 7.2 and later, the PRTRPTBRM command using parameter
TYPE(*CLTGRPSTAT) has been enhanced with a new EXPDATE parameter
to allow reporting of active control group data.
13. In 7.2 and later, cloud backup volumes from image catalog
Q1ABRMPOOL are not being cleaned up after being transferred to
the cloud.
14. In 7.2 and later, setting secure DDM using the Node Policy
communications in BRMS Enterprise interface does not honor lower
case password characters resulting in user profiles being
incorrectly disabled.
15. In 7.2 and later, BRMS was ending control groups with
message MSGBRM10A1 if a *SPL list saved a single empty *OUTQ.
16. In 7.2 and later, the PRTRPTBRM command using parameter
TYPE(*CLTGRPSTAT) output report has been enhanced to show if
encryption was used during the backup of any control group
entries.
17. In 7.2 and later, option 4 (Remove) does not work for
WRKPCYBRM *SYS Option 4 (Change network group) when the system
is in restricted state.
18. In 7.2 and later, when backing up *SPL lists messages
MSGCPC3701 and MSGCPI6705 are not added to the BRMS log.
19. In 7.2 and later, viewing details for BRMS web GUI failed
operations may list message MSGCPF2457 for BRMS messages instead
of the correct BRMS message text.
20. In 7.2 and later, RSTLIBBRM and RSTOBJBRM with a SAVASP()
parameter value of an IASP name that does not exist on the
system incorrectly fails with MSGBRM2112.
21. In 7.2 and later, when the Q1ACHKRSIZ to check the restore
size is enabled, spooled file restores may fail with message
MSGBRM3D1B.
22. In 7.2 and later, changes were made in the BRMS recovery
report (QP1ARCY) to streamline the required recovery steps.
23. In 7.2, SAVSAVFBRM with ENDOPT(*UNLOAD) does not unload the
volume.

CORRECTION FOR APAR 'SE73214' :
-------------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


----------------------------------------------------------------
------------------------------------

Enable the BRMS plug-in for System i Navigator Windows/OS
client.
1) Close the System i Navigator application.
2) Open a Windows Command Prompt screen.
3) Enter the following command:
cwbinplg /REMOVE=IBM.BRMSPlugin
4) On the client/PC, start the iSeries Navigator.
5) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main System i
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.

CIRCUMVENTION FOR APAR 'SE73214' :
----------------------------------
None.


Activation Instructions

None.




Special Instructions


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and

users must signoff and on again before using BRMS after the PTF is

applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy

mode for the PTF to apply.

To verify the FlashCopy status of a system is *END, enter the following

command:

CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS

plug-in for the IBM System Director Navigator for i5/OS (web browser)

or System k Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for

i5/OS.

Note: Ending the http admin servers may affect other non-BRMS users

From System i:

1. Enter the command to end the http admin servers:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

2. Wait for the http admin server jobs to end or terminate them.

Use command WRKACTJOB SBS(QHTTPSVR)

3. Restart the http admin servers:

STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.
Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this PTF is being applied and
users must signoff and on again before using BRMS after the PTF is
applied.

Note: When loading BRMS PTFs, the systems needs to be out of FlashCopy
mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the following
command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After ther BRMS PTF is installed, do the following to enable the BRMS
plug-in for the IBM System Director Navigator for i5/OS (web browser)
or System k Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator for
i5/OS.
Note: Ending the http admin servers may affect other non-BRMS users
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate them.
Use command WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS jobs must be ended before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS jobs must be ended before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


Please end all BRMS jobs before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI71973      BRM-MAINT-INCORROUT Fixes March 2020
   SI71874      BRM-MAINT INCORROUT Fixes - January 2020
   SI71132      BRM-MAINT INCORROUT Fixes - December 2019
   SI70624      BRM-MAINT INCORROUT Fixes - September 2019
   SI70366      BRM-MAINT INCORROUT Fixes - July 2019
   SI69389      BRM-MAINT-INCORROUT Fixes - June 2019
   SI68855      BRM-MAINT-INCORROUT Fixes - March 2019
   SI68845      BRM-MAINT-INCORROUT Fixes - December 2019
   SI68567      BRM-MAINT-INCORROUT Fixes - December 2018
   SI68072      BRM-MAINT-INCORROUT Fixes - September 2018
   SI67312      BRM-MAINT-INCORROUT Fixes - June 2018
   SI66899      BRM-MAINT-INCORROUT Fixes - March 2018
   SI66285      BRM-MAINT-INCORROUT Fixes-Dec 2017
   SI65675      BRM-MAINT-INCORROUT Fixes-Sept 2017
   SI64248      BRM-MAINT-INCORROUT Fixes-June 2017
   SI64275      BRM-BACKUP-MSGBRM4106 - REQUESTED FUNCTION NOT CORRECT
   SI63721      BRM-MAINT-INCORROUT Fixes-Mar 2017
   SI63591      BRM-MAINT-MSGBRM6714 STRMNTBRM LOOPS WITH CORRUPT BRM6714 ME
   SI63085      BRM-MAINT-INCORROUT Fixes-Dec 2016
   SI61152      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI61152      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI59998      BRM-MAINT-INCORROUT Fixes-June 2016
   SI60600      BRM-RECOVERY-THREADS-MSGCPF3878C BRMS RESTORE FROM PARALLEL
   SI58957      BRM-MAINT-INCORROUT Fixes-March 2016
   SI57831      BRM-MAINT-INCORROUT Fixes-Dec 2015
   SI57980      BRM PROBLEM REMOVING SYSTEM FROM BRMS NETWORK
   SI57980      BRM-MEDIA-LOOP WHEN APPENDING SAVES TO DUPLICATE MEDIA USING
   SI57214      BRM-MAINT-INCORROUT Fixes-Sept 2015
   SI56278      BRM-MAINT-INCORROUT  Fixes
   SI55731      BRM-MAINT-INCORROUT  Fixes
   SI54787      BRM-MAINT-INCORROUT  Fixes
   SI53306      BRM-MAINT-INCORROUT  Fixes
   SI52668      BRM-MAINT-INCORROUT  Fixes
   SI51641      BRM-MAINT-INCORROUT  Fixes
   SI50936      BRM-MAINT-INCORROUT  Fixes

Summary Information

System..............................  i
Models..............................  
Release.............................  V7R2M0
Licensed Program....................  5770BR1
APAR Fixed..........................  View details for APAR SE73214
Superseded by:......................  View fix details for PTF SI79121
Recompile...........................  N
Library.............................  QBRM
MRI Feature ........................  NONE
Cum Level...........................  C0296720


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.2.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770BR1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
13 May 2022