IBM Support

SI72017 - OSP-XTND-OTHER-UNPRED SEARCH FILTER TEXT CAN'T BE CLEARED

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

OSP-XTND-OTHER-UNPRED SEARCH FILTER TEXT CAN'T BE CLEARED


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5770SS1  V7R4M0    SI72016   NONE     0003



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
The PTF delivers some updates for IBM Navigator for i

- The replacement variable &DATE used in message monitor
trigger command does not have the same format as that in system
values QDATFMT and QDATSEP. For example, &DATE returns the
format MMddyyyy while QDATFMT is set to DMY and QDATSEP is set
to 2(dash).

CORRECTION FOR APAR SE72846 :
-----------------------------

- The problem that the variable &DATE in message monitor
trigger command does not match the system values QDATFMT and
QDATSEP has been resolved in this PTF.


CIRCUMVENTION FOR APAR SE72846 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72720 :
-----------------------------------------------
On IBM Navigator for i, Dashboard job filter can't be cleared

CORRECTION FOR APAR SE72720 :
-----------------------------
This PTF fixed the problem. Job filter on Dashboard can be
cleared.

CIRCUMVENTION FOR APAR SE72720 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72792 :
-----------------------------------------------
IBM Navigator for i only displays first 100 FTP server jobs,
even though there are more than 100 jobs. This happens when the
"Server Jobs" action is selected for the FTP server in TCP/IP
Servers.

CORRECTION FOR APAR SE72792 :
-----------------------------
This PTF fixed the issue and all jobs are now displayed.

CIRCUMVENTION FOR APAR SE72792 :
--------------------------------
Run Command or within AJS, prompting RSTLIBBRM just doesn't
work, with or without any parameters. After selecting "prompt",
the screen just refreshes and the prompt is not shown.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72895 :
-----------------------------------------------
IBM Navigator for i under Network -> Servers -> Host Servers
when going into the Properties for a Host Server and the
Subsystems tab, when attempting to make a change in the All
Clients section with that radio button selected the OK button to
save that change does nothing.

CORRECTION FOR APAR SE72895 :
-----------------------------
This PTF fixed the problem and the function works well now

CIRCUMVENTION FOR APAR SE72895 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE73051 :
-----------------------------------------------
Selecting features from the left hand navigation, Performance ->
Investigate Data, and others
results in the message "Please login to use this Portlet".
User needs to select the same feature a second or subsequent
time before the task is displayed.

CORRECTION FOR APAR SE73051 :
-----------------------------
This PTF fixes the underlying cause of this problem so the error
should not occur any more.

CIRCUMVENTION FOR APAR SE73051 :
--------------------------------
Close tab and relaunch task from left hand navigator until the
correct results are shown.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE73073 :
-----------------------------------------------
Prompting for the RSTLIBBRM command does not work.  This happens
when using the Run Command function, or when prompting within
the Advanced Job Scheduler function.
After selecting "prompt",   the screen just refreshes and the
prompt is not shown.

CORRECTION FOR APAR SE73073 :
-----------------------------
Changes have been made to IBM Navigator for i so that prompting
for the RSTLICBRM command will work as expected.

CIRCUMVENTION FOR APAR SE73073 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE73210 :
-----------------------------------------------
IDS Events do not display when selected in IBM Navigator for i.

CORRECTION FOR APAR SE73210 :
-----------------------------
The problem is fixed in this PTF and IDS Events can display the
events information according to the filter condition now.

CIRCUMVENTION FOR APAR SE73210 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

5. It is recommended to install HTTP group instead of installing
this single PTF

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI69610 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI71661      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71661      OSP-BASEDIR-INCORROUT NAVIGATOR FOR I LOGON USING QSECOFR RE
   SI71661      OSP-BASEDIR-MSGCPF4AC2 PASSWORD DOES NOT MEET ALL PASSWORD R
   SI71661      OSP-BASEDIR-INCORROUT MOVE TO NEW WINDOW
   SI71661      OSP-BASEDIR-UNPRED GO BUTTON FOR COMMAND LIKE DSPJOBLOG DOES
   SI71661      OSP-BASEDIR-UNPRED NAVIGATOR FOR I SHOWS DIFFERENT TIME ON S
   SI71273      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71273      OSP-BASEDIR EIM PASSWORD GETS SET TO "NULL"
   SI70727      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI70727      OSP-OTHER UNABLE TO REMOVE EXISTING IP ADDRESSES FROM AN EXI
   SI70727      OSP-BASEDIR-UNPRED NAVIGATOR FOR I VARIABLES ARE TRUNCATED W
   SI70727      OSP-BASEDIR-UNPRED NAV FOR I SEND PTF TASK FAILED
   SI69610      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i (L1C)
   SI69196      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI69196      Set dynamic JAVA_HOME for PGM QINAVMNSRV

Summary Information

System..............................i
Models..............................
Release.............................V7R4M0
Licensed Program....................5770SS1
APAR Fixed..........................View details for APAR SE72846
View details for APAR SE72720
View details for APAR SE72792
View details for APAR SE72895
View details for APAR SE73051
View details for APAR SE73073
View details for APAR SE73210
Superseded by:......................View fix details for PTF SI79558
Recompile...........................N
Library.............................QSYSDIR
MRI Feature ........................NONE
Cum Level...........................C0303740


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.4.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770SS1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
29 April 2022