IBM Support

SI72015 - OSP-XTND-OTHER-UNPRED SEARCH FILTER TEXT CAN'T BE CLEARED

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

OSP-XTND-OTHER-UNPRED SEARCH FILTER TEXT CAN'T BE CLEARED


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5770SS1  V7R3M0    SI72014   NONE     0003
PRE  5770SS1  V7R3M0    SI62116   00/00    0000
PRE  5770SS1  V7R3M0    SI58548   00/00    0000
PRE  5770SS1  V7R3M0    SI58549   00/00    0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
The PTF delivers some updates for IBM Navigator for i

- The replacement variable &DATE used in message monitor
trigger command does not have the same format as that in system
values QDATFMT and QDATSEP. For example, &DATE returns the
format MMddyyyy while QDATFMT is set to DMY and QDATSEP is set
to 2(dash).

CORRECTION FOR APAR SE72844 :
-----------------------------

- The problem that the variable &DATE in message monitor
trigger command does not match the system values QDATFMT and
QDATSEP has been resolved in this PTF.

CIRCUMVENTION FOR APAR SE72844 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72792 :
-----------------------------------------------
IBM Navigator for i only displays first 100 FTP server jobs,
even though there are more than 100 jobs. This happens when the
"Server Jobs" action is selected for the FTP server in TCP/IP
Servers.

CORRECTION FOR APAR SE72792 :
-----------------------------
This PTF fixed the issue and all jobs are now displayed.

CIRCUMVENTION FOR APAR SE72792 :
--------------------------------
Run Command or within AJS, prompting RSTLIBBRM just doesn't
work, with or without any parameters. After selecting "prompt",
the screen just refreshes and the prompt is not shown.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72720 :
-----------------------------------------------
On IBM Navigator for i, Dashboard job filter can't be cleared

CORRECTION FOR APAR SE72720 :
-----------------------------
This PTF fixed the problem. Job filter on Dashboard can be
cleared.

CIRCUMVENTION FOR APAR SE72720 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72895 :
-----------------------------------------------
IBM Navigator for i under Network -> Servers -> Host Servers
when going into the Properties for a Host Server and the
Subsystems tab, when attempting to make a change in the All
Clients section with that radio button selected the OK button to
save that change does nothing.

CORRECTION FOR APAR SE72895 :
-----------------------------
This PTF fixed the problem and the function works well now

CIRCUMVENTION FOR APAR SE72895 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE73073 :
-----------------------------------------------
Prompting for the RSTLIBBRM command does not work.  This happens
when using the Run Command function, or when prompting within
the Advanced Job Scheduler function.
After selecting "prompt",   the screen just refreshes and the
prompt is not shown.

CORRECTION FOR APAR SE73073 :
-----------------------------
Changes have been made to IBM Navigator for i so that prompting
for the RSTLICBRM command will work as expected.

CIRCUMVENTION FOR APAR SE73073 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE73051 :
-----------------------------------------------
Selecting features from the left hand navigation, Performance ->
Investigate Data, and others
results in the message "Please login to use this Portlet".
User needs to select the same feature a second or subsequent
time before the task is displayed.

CORRECTION FOR APAR SE73051 :
-----------------------------
This PTF fixes the underlying cause of this problem so the error
should not occur any more.

CIRCUMVENTION FOR APAR SE73051 :
--------------------------------
Close tab and relaunch task from left hand navigator until the
correct results are shown.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE73210 :
-----------------------------------------------
IDS Events do not display when selected in IBM Navigator for i.

CORRECTION FOR APAR SE73210 :
-----------------------------
The problem is fixed in this PTF and IDS Events can display the
events information according to the filter condition now.

CIRCUMVENTION FOR APAR SE73210 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

5. It is recommended to install HTTP group instead of installing
this single PTF

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI69810 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI68991 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8
will be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the ADMIN2 job under QHTTPSVR
subsystem before applying PTF:

ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

Note: Make sure that ADMIN2 job ended, then you could go to
next step.
2. Apply or remove this PTF (immediate mode).
3. Start the ADMIN2 job by using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
4. It is highly recommended to clear the browser cache after
applying this PTF.

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

Note: Make sure that QHTTPSVR subsystem ended, then you could go to
next step.

2. Apply or remove this PTF (immediate mode).

3. Start the QHTTPSVR subsystem using:
STRSBS SBSD(QHTTPSVR/QHTTPSVR)

4. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

5. It is highly recommended to clear the browser cache after
applying this PTF.

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.
1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:

ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after
applying this PTF.


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

Before applying this PTF, please ensure HTTP PTF Group SF99722 level 7
(or later) is installed.

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


With this PTF, IBM Navigator for i running on admin2 moves to JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI71663      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71663      OSP-BASEDIR-MSGCPF4AC2 PASSWORD DOES NOT MEET ALL PASSWORD R
   SI71663      OSP-BASEDIR-INCORROUT MOVE TO NEW WINDOW
   SI71663      OSP-BASEDIR-UNPRED GO BUTTON FOR COMMAND LIKE DSPJOBLOG DOES
   SI71663      OSP-BASEDIR-UNPRED NAVIGATOR FOR I SHOWS DIFFERENT TIME ON S
   SI71279      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI71279      OSP-BASEDIR EIM PASSWORD GETS SET TO "NULL"
   SI70729      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI70729      OSP-BASEDIR-UNPRED NAV FOR I SEND PTF TASK FAILED
   SI70729      OSP-OTHER UNABLE TO REMOVE EXISTING IP ADDRESSES FROM AN EXI
   SI70729      OSP-BASEDIR-UNPRED NAVIGATOR FOR I VARIABLES ARE TRUNCATED W
   SI69810      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i
   SI69810      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I DATABASE SCHEMA PO
   SI69810      OSP-BASEDIR-UNPRED RUNTIME ERROR HAS OCCURRED WHEN SELECTING
   SI69810      OSP-BASEDIR-UNPRED DATABASE SECURITY ADMINISTRATOR WITHIN AP
   SI69810      OSP-BASEDIR-UNPRED USER PROFILE GETS DISABLED WHEN USING TAR
   SI69810      OSP-XTND-OTHER-UNPRED SEND PTF PANE FAILS TO LOAD IF BROWSER
   SI69810      OSP-MSGGUIEIMVERIFYFAILS EIM VERIFICATION FAILS IN GUI
   SI69810      OSP-OTHER-MSGCPF3C3A RUNTIME ERROR OCCURRED ON GROUPS IN NAV
   SI69810      OSP-BASEDIR-UNPRED NAVIGATOR FOR I PROMPT RSTOBJ RETURNS MES
   SI69810      OSP-OTHER-INCORROUT RUNTIME ERROR RETURNED FROM NAV FOR I US
   SI69590      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i (L1C)
   SI68991      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI68991      Set dynamic JAVA_HOME for PGM QINAVMNSRV
   SI68991      OSP-OTHER-INCORROUT MONITORS ARE NO LONGER BEING TRIGGERED W
   SI68991      OSP-BASEDIR-UNPRED MESSAGE MONITOR PARAMETERS MSGKEY ENDPOIN
   SI68991      OSP-BASEDIR-UNPRED A TRIGGER COMMAND SPECIFIED IN A MESSAGE
   SI68738      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI68738      OSP-BASEDIR-MSGBRM7003 PROMPTING DUPMEDBRM IN NAVIGATOR FOR
   SI68738      OSP-BASEDIR-MSGCPD70E4 PROMPT CHGJRN COMMAND FROM NAVIGATOR
   SI68738      OSP-PAR-940XCOM JAVA.LANG.NULLPOINTEREXCEPTION ERROR WHEN NA
   SI68738      OSP-BASEDIR-UNPRED STATUS SYSTEM AND MESSAGE MONITOR IN NAVI
   SI68738      OSP-OTHER-UNPRED UNABLE TO MODIFY "DISK STORAGE UTILIZATION"
   SI68738      OSP-BASEDIR-INCORROUT JAVA SCRIPT INJECT XSS ATTACK NAVIGATO
   SI68738      OSP-OTHER CAN'T ADD NONE STANDARD MESSAGE ID TO MESSAGE MONI
   SI68738      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I DOES NOT SHOW CORR
   SI68738      OSP-OTHER-UNPRED NAVIGATOR FOR I - LEFT PANEL BLANK UNTIL LO
   SI67574      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI67574      OSP-BASEDIR-INCORROUT APPLICATION ADMIN WILL NOT LOAD
   SI67574      OSP-BASEDIR-INCORROUT THE INAV SHOWS DIFFERENT DATABASE NAME
   SI67574      OSP-BASEDIR-UNPRED USER PREFERENCES NOT REMEMBERED IN NAVIGA
   SI67574      OSP-MSGADDHOST ADDHOST IN INAV FAILS
   SI66636      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI66636      OSP-UNPRED UPLOAD OF OVERLAY VIA IBM NAVIGATOR FAILS WITH ME
   SI66636      OSP-MSGWRONGCONTENT-PAR-940XCOM WRONG DIRECTORY CONTENT SHOW
   SI66360      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI66360      OSP-BASEDIR-INCORROUT IN THE INAV,USERS WITH *PGMR AUTHORITY
   SI66360      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I NAS MANAGE KEYTAB
   SI66360      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I NOT ALLOWING CONNE
   SI66174      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI65703      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI65703      OSP ACS-NAVIGATOR FOR I-AFP MANAGER NOT ABLE TO BROWSE PC DI
   SI65703      OSP-BASEDIR-UNPRED ACCESSING DISK STATUS REPORTS "SOFTWARE E
   SI65703      HTTPSVR-INCORROUT DATABASES ARE NOT SHOWING IN LEFT PANE OF
   SI65703      QIWA2 NAVIGATOR FOR I WEB INTERFACE DOES NOT ALLOW TO UPDATE
   SI65703      HTTPSVR-INCORROUT WHEN GETS PROMPTED FOR SERVICE TOOLS SIGN-
   SI65703      OSP-PAR-940XBASE BRMS ENTERPRISE STRRCYBRM MISSING ASP PROMP
   SI65703      OSP-BASEDIR-UNPRED "SOFTWARE ERROR" REPORTED WHEN CLICKING O
   SI65703      OSP-INCORROUT FILTER NOT WORKING AS EXPECTED FOR INDEX ADVIS
   SI65703      OSP-BASEDIR-UNPRED NOTHING HAPPENS WHEN SELECTING CENTRAL SE
   SI65703      OSP-PAR-940XMISC APPLICATION ADMINISTRATION PAGE IS BLANK US
   SI65703      Update sql files for PDI Graph History
   SI65703      OSP-OTHER-INCORROUT WHEN USING MULTIPLE FILTER RULES ONLY TH
   SI65703      OSP-BASEDIR-INCORROUT DHCP MONITOR DOESN'T WORK WHEN *IOSYSC
   SI65526      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI64940      OSP-MSGGROUPREGISTRYOPTIONMISSINGFROMEIM GROUP REGISTRY OPTI
   SI64940      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI64940      Update xml & sql files for PDI Graph History
   SI64940      OSP-BASEDIR-INCORROUT NOT ALL SUFFIXES DISPLAY WHEN BROWSING
   SI64940      OSP-INCORROUT NAVIGATOR FOR I PTF COMPARE AND UPDATE FUNCTIO
   SI64940      OSP-XTND EIM MAPPING POLICY IS SHOWING GREYED OUT ON I NAVIG
   SI64940      OSP-BASEDIR-THREADS ERROR OCCURRED WHILE CREATING DOMAIN EIM
   SI64940      OSP-BASEDIR-LOOP MESSAGE MONITOR INTERMITTENTLY GOES INTO A
   SI64940      OSP-BASEDIR-INCORROUT ADMIN2 IS CREATING COOKIES WITHOUT THE
   SI63765      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI63765      Update xml & sql files for PDI Graph History
   SI63765      OSP-OTHER-F/QMHPQSEH-T/QMHPQSEH-MSGCPI2417 MANY CPI2417 MESS
   SI63765      OSP-BASEDIR-INCORROUT SYSTEM OPERATOR MESSAGES ARE NOT SORTI
   SI63577      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI63577      OSP SOME EIM FUNCITONS USING L1C NAVIGATOR FOR I DO NOT WORK
   SI62070      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI62070      Update xml & sql files for PDI Graph History
   SI62070      HTTPSVR-UNPRED UPLOAD FUNCTION IN IBM NAVIGATOR FOR I TO PUT
   SI62070      OSP-BASEDIR-UNPRED SENDING PTFS FAILS WITH "AN ERROR HAS OCC
   SI62070      OSP-XTND-OTHER-INCORROUT CONFIGURING EIM WITH THE GUI USING
   SI62070      OSP-BASEDIR-UNPRED CREATE EIM IDENTIFIER WITH ASSOCIATION TY
   SI61989      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI61989      OSP-BASEDIR-INCORROUT CWWKZ0404E AND CWWKZ0012I MSGS ARE THR
   SI60484      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI59042      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI59042      service entry to service table
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update sql and xml iteration 50 #2
   SI59042      Update sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI58546      Update xml & sql files for PDI
   SI58546      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI58546      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI58546      Update xml & sql files for PDI

Summary Information

System..............................i
Models..............................
Release.............................V7R3M0
Licensed Program....................5770SS1
APAR Fixed..........................View details for APAR SE72844
View details for APAR SE72792
View details for APAR SE72720
View details for APAR SE72895
View details for APAR SE73073
View details for APAR SE73051
View details for APAR SE73210
Superseded by:......................View fix details for PTF SI79560
Recompile...........................N
Library.............................QSYSDIR
MRI Feature ........................NONE
Cum Level...........................C0128730


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.3.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770SS1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
29 April 2022