IBM Support

SI71253 - OSP-INCORROUT Add logging to administrative domain

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

OSP-INCORROUT Add logging to administrative domain


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
Add additional logging to administrative domain to determine
potential administrative domain problems.

CORRECTION FOR APAR SE72279 :
-----------------------------
Additional logging is added to administrative domain.

CIRCUMVENTION FOR APAR SE72279 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72280 :
-----------------------------------------------
UPDATE ME

CORRECTION FOR APAR SE72280 :
-----------------------------
UPDATE ME

CIRCUMVENTION FOR APAR SE72280 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72281 :
-----------------------------------------------
Add support for IP address configuration objects in device
cluster resource groups.

CORRECTION FOR APAR SE72281 :
-----------------------------
Added support for IP address configuration objects in device
cluster resource groups.

CIRCUMVENTION FOR APAR SE72281 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72282 :
-----------------------------------------------
Increase the cluster administrative domain limit on monitored
resource entries from 45000 to 200000.

CORRECTION FOR APAR SE72282 :
-----------------------------
Increased the cluster administrative domain limit on monitored
resource entries from 45000 to 200000.

CIRCUMVENTION FOR APAR SE72282 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72283 :
-----------------------------------------------
Cluster Administrative Domain currently does not support
replicating passwords that are updated using the Set Encrypted
User Password (QSYSUPWD) API
(https://www.ibm.com/support/knowledgecenter/ssw_ibm_i_74/apis/q
sysupwd.htm). As such, user profile monitored resource entries
that are using this API to change their password are marked as
Inconsistent.

CORRECTION FOR APAR SE72283 :
-----------------------------
The Cluster Administrative Domain code was changed to support
replicating encrypted user profile passwords that are set using
the Set Encrypted User Password (QSYSUPWD) API.

CIRCUMVENTION FOR APAR SE72283 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE72473 :
-----------------------------------------------
Currently most cluster commands, including CRTCLU, CRTCRG, and
ADDCRGDEVE, do not allow IP addresses ending in '255' to be used
in the cluster.

CORRECTION FOR APAR SE72473 :
-----------------------------
Cluster code has been modified to allow valid IP addresses
ending in '255' to be used in the cluster.

CIRCUMVENTION FOR APAR SE72473 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


Before applying this PTF, if the node that this PTF is being installed
on is a member of a cluster administrative domain, ensure that all
nodes in your cluster administrative domain have compatible password
levels.  Password levels 0 and 1 are compatible.  Passwords level 2 and
3 are compatible.  To see the password level for a node display the
QPWDLVL system value.  If this PTF is installed on all nodes in the
cluster administrative domain and the password levels on nodes in the
administrative domain are not compatible, all user profiles in the
cluster administrative domain will be marked as inconsistent.  If this
happens the user profiles cannot be made consistent until all nodes in
the cluster administrative domain are at compatible password levels.

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI70313 :
=================================================

Clustering must be ended and restarted on any Cluster node with a REST
Cluster Monitor for the PTF code to be activated.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI69207 :
=================================================

1. On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

2. It is recommended to sign off or end any user job that issued any
cluster command or API. After the fix is applied, the job can be
started or can sign on again.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI70357 :
=================================================

1. On each node in the cluster, end clustering, apply the fix, and then
start clustering.  It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

2. It is recommended to sign off or end any user job that issued any
cluster command or API. After the fix is applied, the job can be
started or can sign on again.

3. After the PTF has been applied, you should also restart the
QPRFSYNCH job on every node in your cluster.  You can restart the
QPRFSYNCH job with the following commands:

CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)


Default Instructions

THIS IS A DELAYED PTF TO BE APPLIED AT IPL TIME.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI70313      OSP-INCORROUT HMC REST Cluster Monitor retry if logon fails
   SI70103      Potential security issue
   SI69207      OSP-INCORROUT CHGCRGPRI may fail with hyperswap and global m
   SI70357      OSP-OTHER-F/QHACMN-RC1-MSGCPDBB01 MSGCPDBB01 ENCOUNTERED DUR
   SI70276      OSP-OTHER-F/STRINGHIGHUSE4K-T/QCSTADCMN-MSGMCH0601 MSGMCH060
   SI70045      HASM-HA-F/CSTADCHGS-T/CSTADCHGS-MSGCPF1059 QAUDLVL SET WITH
   SI70047      Remove support for *TRNLIN resource type and obsolete *ETHLI
   SI69699      Cluster related fixes for 7.4
   SI69372      Cluster related fixes for 7.4

Summary Information

System..............................i
Models..............................
Release.............................V7R4M0
Licensed Program...............5770SS1
APAR Fixed..........................View details for APAR SE72279
View details for APAR SE72280
View details for APAR SE72281
View details for APAR SE72282
View details for APAR SE72283
View details for APAR SE72473
Superseded by:......................View fix details for PTF SI75925
Recompile...........................N
Library.............................QSYS
MRI Feature ........................NONE
Cum Level...........................C0121740


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.4","Product":{"code":"SG15V","label":"PTF Cover Letters - IBM i General"},"Component":"5770SS1","Edition":""},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.4","Product":{"code":"SS9QQS","label":"IBM i 7.4"},"Component":"5770SS1","Edition":""}]

Document Information

Modified date:
15 April 2021