IBM Support

SI69810 - OSP-MSGGUIEIMVERIFYFAILS EIM VERIFICATION FAILS IN GUI

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

OSP-MSGGUIEIMVERIFYFAILS EIM VERIFICATION FAILS IN GUI


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED           PTF/FIX  LEVEL

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
PRE  5770SS1  V7R3M0    SI69809   NONE     0003
PRE  5770SS1  V7R3M0    SI62116   00/00    0000
PRE  5770SS1  V7R3M0    SI58548   00/00    0000
PRE  5770SS1  V7R3M0    SI58549   00/00    0000



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
OSP-BASEDIR-INCORROUT updates for IBM Navigator for i

CORRECTION FOR APAR SE71155 :
-----------------------------
2019 2nd quarter fixes

CIRCUMVENTION FOR APAR SE71155 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE70789 :
-----------------------------------------------
When a Database library ends with #, IBM Navigator for i gives
an error that # is a unaccepted character.

CORRECTION FOR APAR SE70789 :
-----------------------------
A fix will be made to allow a library with a # character in the
name for IBM Navigator for i.

CIRCUMVENTION FOR APAR SE70789 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE70732 :
-----------------------------------------------
After signing on to the IBM Navigator for i, when the customer
clicks "Monitor", then "System monitor" and selects either Start
or Stop menu items from the context menu, the monitor server job
QINAVMNSRV could end abnormally.

CORRECTION FOR APAR SE70732 :
-----------------------------
This PTF fixed the problem so that the Start and Stop menu items
work correctly without causing the monitor server job QINAVMNSRV
to fail.

CIRCUMVENTION FOR APAR SE70732 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE70615 :
-----------------------------------------------
Database Security Administrator within Application
Administration (System -> Application Administration -> Host
Applications Tab -> Expand IBM i -> Expand Database) is not
visible.

CORRECTION FOR APAR SE70615 :
-----------------------------
The ptf fixed this issue and the function works well now.

CIRCUMVENTION FOR APAR SE70615 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE70965 :
-----------------------------------------------
If user has set a target system on IBM Navigator for i, and the
user's password registered for this target system has been
changed, the Navigator for i will fail to connect to the target
system and show the panel target system list instead. The
problem is that the user profile being disabled at the same
time.

CORRECTION FOR APAR SE70965 :
-----------------------------
This PTF fixed this problem and the user profile is not getting
disabled.

CIRCUMVENTION FOR APAR SE70965 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE71125 :
-----------------------------------------------
The final pane of the Send PTF wizard from IBM Navigator for i
fails to load when the browser is set to French language. The
pane fails to show the progress data.

CORRECTION FOR APAR SE71125 :
-----------------------------
This PTF fixed the reported problem so that the Result panel of
the Send PTF wizard can be shown successfully now.

CIRCUMVENTION FOR APAR SE71125 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE70021 :
-----------------------------------------------
EIM verification fails on IBM Navigator for i when the browser
is in Swedish.

CORRECTION FOR APAR SE70021 :
-----------------------------
If the parent distinguished name (DN) of the EIM domain is
"None", it will fail to connect. The text "None" is hard code
and isn't translated. It has been changed to translate to the
appropriate language.

CIRCUMVENTION FOR APAR SE70021 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE71272 :
-----------------------------------------------

The following error could occur when clicking on "Users and
Groups" -> Groups:

*************************************************
Message: Runtime error occurred: Check the error log for the
previous error condition.
Cause: Software error.
Recovery: If this error persists, contact IBM Support.
*************************************************

The following error is logged in Messages.log file: CPF3C3A
Value for parameter 9 for API QGYOLAUS not valid.

CORRECTION FOR APAR SE71272 :
-----------------------------
The fix to the API call has been made so that the Groups list is
displayed correctly.

CIRCUMVENTION FOR APAR SE71272 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE71366 :
-----------------------------------------------
When the following example RSTOBJ command is being entered with
the prompt, followed by clicking on OK, the message CPD37BF -
Starting position requires sequence number is reported.
RSTOBJ OBJ(SAFENETO) SAVLIB(ptf1053c) DEV(*SAVF)
OBJTYPE(*ALL)
SAVF(QRPLOBJ/PTF1053C) RSTLIB(PCSECLIB)

CORRECTION FOR APAR SE71366 :
-----------------------------
Changes are made so that no error is displayed when the
specified RSTOBJ command is prompted, and then OK is pressed.

CIRCUMVENTION FOR APAR SE71366 :
--------------------------------
None.


DESCRIPTION OF PROBLEM FIXED FOR APAR SE71508 :
-----------------------------------------------
Trying to open the AFP Manager > Page Segments features results
in a Runtime Error, Unable to use feature.

CORRECTION FOR APAR SE71508 :
-----------------------------
Code will be changed in Navigator to handle bad data in the user
Registry so the Page Segments list can be shown.

CIRCUMVENTION FOR APAR SE71508 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI68991 :
=================================================

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following commands to stop the ADMIN2 job before
applying PTF:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

2. Apply or remove this PTF (immediate mode).

3. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

4. It is highly recommended to clear the browser cache after
applying this PTF.


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8
will be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the ADMIN2 job under QHTTPSVR
subsystem before applying PTF:

ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

Note: Make sure that ADMIN2 job ended, then you could go to
next step.
2. Apply or remove this PTF (immediate mode).
3. Start the ADMIN2 job by using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
4. It is highly recommended to clear the browser cache after
applying this PTF.

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8
64-bit) is installed before applying this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

Note: Make sure that QHTTPSVR subsystem ended, then you could go to
next step.

2. Apply or remove this PTF (immediate mode).

3. Start the QHTTPSVR subsystem using:
STRSBS SBSD(QHTTPSVR/QHTTPSVR)

4. Start the ADMIN2 job using:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

5. It is highly recommended to clear the browser cache after
applying this PTF.

This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.
1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:

ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after
applying this PTF.


This PTF will enable IBM i Navigator for Java 8.  To ensure Java 8 will
be used, make sure licensed program 5770JV1 option 17 (Java SE 8 64
bit) is installed before applying this PTF.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

Before applying this PTF, please ensure HTTP PTF Group SF99722 level 7
(or later) is installed.

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


IBM Navigator for i running on admin2 uses JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


With this PTF, IBM Navigator for i running on admin2 moves to JDK 64
bit. Before applying this PTF, verify licensed program 5770JV1 option
15 (Java SE 7 64 bit) is installed.

1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


1. Enter the following commands to stop the QHTTPSVR subsystem and
QINAVMNSRV job before applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
CALL PGM(QSYSDIR/QINAVMNSRV) PARM(*STOP)


2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.

1. Enter the following command to stop the QHTTPSVR subsystem before
applying PTF:
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)

2. Apply or remove this PTF (immediate mode).

3. Start the HTTP server(s) using:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

4. It is highly recommended to clear the browser cache after applying
this PTF.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI69590      OSP-BASEDIR-INCORROUT updates for IBM Navigator for i (L1C)
   SI68991      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI68991      Set dynamic JAVA_HOME for PGM QINAVMNSRV
   SI68991      OSP-OTHER-INCORROUT MONITORS ARE NO LONGER BEING TRIGGERED W
   SI68991      OSP-BASEDIR-UNPRED MESSAGE MONITOR PARAMETERS MSGKEY ENDPOIN
   SI68991      OSP-BASEDIR-UNPRED A TRIGGER COMMAND SPECIFIED IN A MESSAGE
   SI68738      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI68738      OSP-BASEDIR-MSGBRM7003 PROMPTING DUPMEDBRM IN NAVIGATOR FOR
   SI68738      OSP-BASEDIR-MSGCPD70E4 PROMPT CHGJRN COMMAND FROM NAVIGATOR
   SI68738      OSP-PAR-940XCOM JAVA.LANG.NULLPOINTEREXCEPTION ERROR WHEN NA
   SI68738      OSP-BASEDIR-UNPRED STATUS SYSTEM AND MESSAGE MONITOR IN NAVI
   SI68738      OSP-OTHER-UNPRED UNABLE TO MODIFY "DISK STORAGE UTILIZATION"
   SI68738      OSP-BASEDIR-INCORROUT JAVA SCRIPT INJECT XSS ATTACK NAVIGATO
   SI68738      OSP-OTHER CAN'T ADD NONE STANDARD MESSAGE ID TO MESSAGE MONI
   SI68738      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I DOES NOT SHOW CORR
   SI68738      OSP-OTHER-UNPRED NAVIGATOR FOR I - LEFT PANEL BLANK UNTIL LO
   SI67574      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI67574      OSP-BASEDIR-INCORROUT APPLICATION ADMIN WILL NOT LOAD
   SI67574      OSP-BASEDIR-INCORROUT THE INAV SHOWS DIFFERENT DATABASE NAME
   SI67574      OSP-BASEDIR-UNPRED USER PREFERENCES NOT REMEMBERED IN NAVIGA
   SI67574      OSP-MSGADDHOST ADDHOST IN INAV FAILS
   SI66636      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI66636      OSP-UNPRED UPLOAD OF OVERLAY VIA IBM NAVIGATOR FAILS WITH ME
   SI66636      OSP-MSGWRONGCONTENT-PAR-940XCOM WRONG DIRECTORY CONTENT SHOW
   SI66360      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI66360      OSP-BASEDIR-INCORROUT IN THE INAV,USERS WITH *PGMR AUTHORITY
   SI66360      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I NAS MANAGE KEYTAB
   SI66360      OSP-BASEDIR-INCORROUT IBM NAVIGATOR FOR I NOT ALLOWING CONNE
   SI66174      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI65703      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI65703      OSP ACS-NAVIGATOR FOR I-AFP MANAGER NOT ABLE TO BROWSE PC DI
   SI65703      OSP-BASEDIR-UNPRED ACCESSING DISK STATUS REPORTS "SOFTWARE E
   SI65703      HTTPSVR-INCORROUT DATABASES ARE NOT SHOWING IN LEFT PANE OF
   SI65703      QIWA2 NAVIGATOR FOR I WEB INTERFACE DOES NOT ALLOW TO UPDATE
   SI65703      HTTPSVR-INCORROUT WHEN GETS PROMPTED FOR SERVICE TOOLS SIGN-
   SI65703      OSP-PAR-940XBASE BRMS ENTERPRISE STRRCYBRM MISSING ASP PROMP
   SI65703      OSP-BASEDIR-UNPRED "SOFTWARE ERROR" REPORTED WHEN CLICKING O
   SI65703      OSP-INCORROUT FILTER NOT WORKING AS EXPECTED FOR INDEX ADVIS
   SI65703      OSP-BASEDIR-UNPRED NOTHING HAPPENS WHEN SELECTING CENTRAL SE
   SI65703      OSP-PAR-940XMISC APPLICATION ADMINISTRATION PAGE IS BLANK US
   SI65703      Update sql files for PDI Graph History
   SI65703      OSP-OTHER-INCORROUT WHEN USING MULTIPLE FILTER RULES ONLY TH
   SI65703      OSP-BASEDIR-INCORROUT DHCP MONITOR DOESN'T WORK WHEN *IOSYSC
   SI65526      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI64940      OSP-MSGGROUPREGISTRYOPTIONMISSINGFROMEIM GROUP REGISTRY OPTI
   SI64940      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI64940      Update xml & sql files for PDI Graph History
   SI64940      OSP-BASEDIR-INCORROUT NOT ALL SUFFIXES DISPLAY WHEN BROWSING
   SI64940      OSP-INCORROUT NAVIGATOR FOR I PTF COMPARE AND UPDATE FUNCTIO
   SI64940      OSP-XTND EIM MAPPING POLICY IS SHOWING GREYED OUT ON I NAVIG
   SI64940      OSP-BASEDIR-THREADS ERROR OCCURRED WHILE CREATING DOMAIN EIM
   SI64940      OSP-BASEDIR-LOOP MESSAGE MONITOR INTERMITTENTLY GOES INTO A
   SI64940      OSP-BASEDIR-INCORROUT ADMIN2 IS CREATING COOKIES WITHOUT THE
   SI63765      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI63765      Update xml & sql files for PDI Graph History
   SI63765      OSP-OTHER-F/QMHPQSEH-T/QMHPQSEH-MSGCPI2417 MANY CPI2417 MESS
   SI63765      OSP-BASEDIR-INCORROUT SYSTEM OPERATOR MESSAGES ARE NOT SORTI
   SI63577      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI63577      OSP SOME EIM FUNCITONS USING L1C NAVIGATOR FOR I DO NOT WORK
   SI62070      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI62070      Update xml & sql files for PDI Graph History
   SI62070      HTTPSVR-UNPRED UPLOAD FUNCTION IN IBM NAVIGATOR FOR I TO PUT
   SI62070      OSP-BASEDIR-UNPRED SENDING PTFS FAILS WITH "AN ERROR HAS OCC
   SI62070      OSP-XTND-OTHER-INCORROUT CONFIGURING EIM WITH THE GUI USING
   SI62070      OSP-BASEDIR-UNPRED CREATE EIM IDENTIFIER WITH ASSOCIATION TY
   SI61989      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI61989      OSP-BASEDIR-INCORROUT CWWKZ0404E AND CWWKZ0012I MSGS ARE THR
   SI60484      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI60484      Update xml & sql files for PDI Graph History
   SI59042      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI59042      service entry to service table
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update sql and xml iteration 50 #2
   SI59042      Update sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI59042      Update xml & sql files for PDI Graph History
   SI58546      Update xml & sql files for PDI
   SI58546      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI58546      OSP-BASEDIR-INCORROUT IBM Navigator for i
   SI58546      Update xml & sql files for PDI

Summary Information

System..............................i
Models..............................
Release.............................V7R3M0
Licensed Program....................5770SS1
APAR Fixed..........................View details for APAR SE71155
View details for APAR SE70789
View details for APAR SE70732
View details for APAR SE70615
View details for APAR SE70965
View details for APAR SE71125
View details for APAR SE70021
View details for APAR SE71272
View details for APAR SE71366
View details for APAR SE71508
Superseded by:......................View fix details for PTF SI79560
Recompile...........................N
Library.............................QSYSDIR
MRI Feature ........................NONE
Cum Level...........................C9311730


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.3.0","Product":{"code":"SWG60","label":"IBM i"},"Component":"5770SS1","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
29 April 2022