PTF Cover Letter
PTF ( Program Temporary Fixes ) Cover letter
BRM-MAINT-INCORROUT Fixes-Mar 2017
Pre/Co-Requisite PTF / Fix List
REQ LICENSED PTF/FIX LEVEL
TYPE PROGRAM RELEASE NUMBER MIN/MAX OPTION
---- -------- --------- ------- ------- ------
NONE
NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels. This PTF may be a prerequisite
for future PTFs. By applying this PTF you authorize and agree to the
foregoing.
This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF. You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.
SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.
The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.
APAR Error Description / Circumvention
-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.
Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS web
page:
www.ibm.com/developerworks/ibmi/brms
Additionally also review the media web page:
www.ibm.com/developerworks/ibmi/media
Fixes in this PTF:
1. N/A.
2. N/A.
3. In 7.1 and later, cloud volumes may not be deleted after
expiration.
4. In 7.1 and later, using STRRCYBRM to restore IFS (*LINK) data
from a parallel save may fail with MSGMCH0603.
5. In 7.1 and later, when specifying an invalid system name in
the FROMSYS parameter on the WRKMEDIBRM command, messages
MSGCPF4101 and MSGRNQ1217 will be posted.
6. In 7.1 and later, BRMS has been enhanced to support user
defined tape media libraries to automatically mount volumes when
using fewer tape drives for restores than what was used for
parallel saves. To enable this function, CRTDTAARA
DTAARA(QUSRBRM/Q1AUSRMLB) TYPE(*CHAR).
7. In 7.1 and later, when running STRMNTBRM or STREXPBRM with
*YES specified for the EXPMED parameter , BRMS may incorrectly
post MSGMCH1202 for versioned volumes.
8. N/A.
9. In 7.1 and later, the BRMS GUI client incorrectly shows
secured volumes as unsecured volumes and unsecured volumes as
secured volumes.
10. In 7.2 and later, control group special values *ALLTEST,
*ALLPROD, and *ASPnn have been enhanced to run a single command
for full saves.
11. In 7.2 and later, cloud backups that span multiple volumes
while saving QUSRBRM may fail.
12. In 7.2 and later, the STRRCYBRM command using
ACTION(*REPORT) with Domino recovery has been enhanced to remove
an IPL step.
13. N/A.
14. In 7.3 and later, the Recovery report ( QP1ARCY) report has
been enhanced to include instructions to change the QSYSOPR
message queue after the sign on in the 'Update System Name in
BRMS Media Information' step.
15. In 7.1 and later, the ANZLIBBRM report (QP1ALA) now has a
better estimate in the summary section for *LINK data.
16. In 7.1 and later, archiving spooled files using STRARCBRM
may post message a MSGCPF0804.
17. N/A.
18. In 7.1 and later, printing BRMS recovery reports (QP1ARCY)
via the STRRCYBRM or STRMNTBRM commands may be slow.
19. In 7.1 and later, when using the IBM Cloud Storage Solutions
for i, BRMS may leave non-turn key volumes in a bad state.
20. In 7.2 and later, incremental saves for spooled file data in
multiple libraries by SAVLIBBRM or backup control groups not
show in WRKSPLFBRM.
21. In 7.1 and later, when using IBM Cloud Storage Solutions for
i, turn key devices for restores are incorrectly created at non
*HOME locations.
22. In 7.1 and later, BRMS has been enhanced to prevent
unlicensed use of cloud backups and saves without a valid
license for IBM Cloud Storage Solutions i. BRMS will send
MSGBRM4106.
23. In 7.1 and later, when using the IBM Navigator for i BRMS
plugin, the Initialize volume function fails with CWLAA6003
portlet error.
24. In 7.1 and later, duplicate libraries may be listed in the
BRMS recovery report (QP1ARCY).
25. In 7.1 and later, STRMNTBRM with RGZBRMDB(*YES) may fail
with MSGBRM4128 RC0099.
26. N/A.
27. In 7.1 and later, saves of QUSRBRM library may post
MSGCPF3761.
CORRECTION FOR APAR 'SE66539' :
-------------------------------
Load and apply this PTF.
Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note: ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command: WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
----------------------------------------------------------------
------------------------------------
Enable the BRMS plug-in for System i Navigator Windows/OS
client.
==== Pre-V6R1:
1) Close the System i Navigator application.
2) On the client/PC, uninstall the BRMS plug-in using the
Client
Access Express "Selective Setup" utility: from the
Windows
"Start", select
"Programs->IBM iSeries Access for Windows->Selective
Setup".
Follow the instructions on the dialogs to uninstall the
BRMS
plug-in. Notes:
a) On the second dialog, select the radio button "Ignore.
I'm
only going to UN-install components".
b) On the next screen, "Component Selection", open the
System i Navigator folder; a list of all installed
System i Navigator components and plug-ins is displayed.
c) Deselect the BRMS plug-in to uninstall it (if you do
not
see the BRMS plug-in, it was not properly installed);
reboot the PC if requested.
3) Start System i Navigator.
4) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main iSeries
Navigator "File" menu and the "My Connections" folder
context/pop-up menu. When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.
=== V6R1 and newer:
1) Close the System i Navigator application.
2) Open a Windows Command Prompt screen.
3) Enter the following command:
cwbinplg /REMOVE=IBM.BRMSPlugin
4) On the client/PC, start the iSeries Navigator.
5) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main System i
Navigator "File" menu and the "My Connections" folder
context/pop-up menu. When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.
CIRCUMVENTION FOR APAR 'SE66539' :
----------------------------------
None.
Activation Instructions
None.
Special Instructions
********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************
All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.
Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note: ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command: WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
Please end all BRMS jobs before applying this ptf.
Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')
After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.
Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note: ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command: WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
All BRMS activity must be stopped while this ptf is
being applied and users must signoff and on again
before using BRMS after the ptf is applied.
Default Instructions
THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.
Supersedes
PTF/FIX NO(S). APAR TITLE LINE
-------------- ------------------------------------------------------------
SI63591 BRM-MAINT-MSGBRM6714 STRMNTBRM LOOPS WITH CORRUPT BRM6714 ME
SI63085 BRM-MAINT-INCORROUT Fixes-Dec 2016
SI61152 BRM-MAINT-INCORROUT Fixes-Sept 2016
SI61152 BRM-MAINT-INCORROUT Fixes-Sept 2016
SI59998 BRM-MAINT-INCORROUT Fixes-June 2016
SI60600 BRM-RECOVERY-THREADS-MSGCPF3878C BRMS RESTORE FROM PARALLEL
SI58957 BRM-MAINT-INCORROUT Fixes-March 2016
SI57831 BRM-MAINT-INCORROUT Fixes-Dec 2015
SI57980 BRM PROBLEM REMOVING SYSTEM FROM BRMS NETWORK
SI57980 BRM-MEDIA-LOOP WHEN APPENDING SAVES TO DUPLICATE MEDIA USING
SI57214 BRM-MAINT-INCORROUT Fixes-Sept 2015
SI56278 BRM-MAINT-INCORROUT Fixes
SI55731 BRM-MAINT-INCORROUT Fixes
SI54787 BRM-MAINT-INCORROUT Fixes
SI53306 BRM-MAINT-INCORROUT Fixes
SI52668 BRM-MAINT-INCORROUT Fixes
SI51641 BRM-MAINT-INCORROUT Fixes
SI50936 BRM-MAINT-INCORROUT Fixes
Summary Information
System.............................. i
Models..............................
Release............................. V7R2M0
Licensed Program.................... 5770BR1
APAR Fixed.......................... View details for APAR SE66539
Superseded by:...................... View fix details for PTF SI79121
Recompile........................... N
Library............................. QBRM
MRI Feature ........................ NONE
Cum Level........................... C7290720
IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.
Was this topic helpful?
Document Information
Modified date:
13 May 2022