SI63085 - BRM-MAINT-INCORROUT Fixes-Sept 2016

TYPE PROGRAM  RELEASE   NUMBER   MIN/MAX  OPTION
---- -------- --------- -------  -------  ------
NONE



NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.
Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS web
page:
www.ibm.com/developerworks/ibmi/brms
Additionally also review the media web page:
www.ibm.com/developerworks/ibmi/media

Fixes in this PTF:

1. N/A
2. In 7.1 and later, media using versioning may not expire
correctly when saved data contents include spooled files saved
via a spool list.
3.  In 7.1 and later, BRMS has been enhanced to send error
message MSGBRM1921 when BRMS operations are attempted without a
valid 57xxBR1 license key.
4. In 7.1 and later, when using native save commands to save
data to BRMS enrolled media, the expiration date for the volume
may not be set to *PERM.
5. In 7.1 and later, BRMS job Q1ACPDST has a memory leak.
6. N/A.
7. In 7.1 and later, when using BRMS functional authority, not
all BRMS functions are locked when using BRMS GUI client.
8. In 7.1 and later, after loading 57xxBR1 PTFs, BRMS working
files may not be deleted.
9. In 7.1 and later, BRMS backups using a control group may hang
when saving the media recovery information.
10. In 7.1 and later, cloud turn key control group names
starting with prefix QCLDBIPL or QCLDBGRP or a cloud control
group using a media class set to *VRTUDF may incorrectly fail
with MSGOPT1487.
11. In 7.1 and later, cloud turn key control group names
starting with prefix QCLDBGRP or QCLDBUSR do not save journaled
objects when specifying cumulative or incremental saves.
12. In 7.1and later, when making changes in BRMS GUI client when
signed on with a user profile that starts with the letter 'Q',
the BRMS GUI client 'Changed by' user profile properties
incorrectly show QUSER.
13. In 7.2 and later, BRMS GUI client system policy updates to
the 'Output queue' and 'Output queue library' attributes are not
being updated in green screen.
14. In 7.1 and later, message MSGBRM1049 may be incorrectly
emailed twice.
15.  In 7.1 and later, when doing an install, the QBRMSYNC job
in the Q1ABRMNET subsystem may have a lot of history updates to
synchronize to other systems in the BRMS network when upgrading
from 6.1 or lower.
16. In 7.1 and later, when doing cloud backups and restores
using turnkey devices, message MSGBRM1294 may be incorrectly
posted.
17. In 7.1 and later, STRMNTBRM will clean up files in QUSRBRM
with a suffix of $$ or #.
18. In 7.1 and later, WRKLOCBRM and BRMS GUI client 'Manage
locations...' will show the current count for volumes and
containers on current system.
19. In 7.1 and later, message MSGCPD0078 may be incorrectly
posted when restoring multiple IFS items using WRKMEDIBRM option
7.
20. In 7.1 and later, STRRCYBRM OPTION(*SYSTEM) ACTION(*REPORT)
for a cloud backup may incorrectly list cloud volumes that were
not moved to the cloud location at the time the report was
created.
21. In 7.2 and later, performance of first incremental save
after a full save of *ALLUSR may be improved when
SAVACT(*SYNCLIB) is specified.
22. In 7.1 and later, STRMNTBRM does not validate input for the
Remove log entries(RMVLOGE) parameter.
23. In 7.1 and later, PRTRPTBRM may post message MSGMCH1210.
24. In 7.1 and later, using option 2 or 5 from the WRKPCYBRM
TYPE(*MED) display may incorrectly post a MSGMCH1202 message.

CORRECTION FOR APAR 'SE66126' :
-------------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


----------------------------------------------------------------
------------------------------------

Enable the BRMS plug-in for System i Navigator Windows/OS
client.
==== Pre-V6R1:
1) Close the System i Navigator application.
2) On the client/PC, uninstall the BRMS plug-in using the
Client

Access Express "Selective Setup" utility:  from the
Windows
"Start", select
"Programs->IBM iSeries Access for Windows->Selective
Setup".

Follow the instructions on the dialogs to uninstall the
BRMS

plug-in.  Notes:
a) On the second dialog, select the radio button "Ignore.
I'm
only going to UN-install components".
b) On the next screen, "Component Selection", open the
System i Navigator folder; a list of all installed
System i Navigator components and plug-ins is displayed.
c) Deselect the BRMS plug-in to uninstall it (if you do
not
see the BRMS plug-in, it was not properly installed);
reboot the PC if requested.
3) Start System i Navigator.
4) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main iSeries
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.

=== V6R1 and newer:
1) Close the System i Navigator application.
2) Open a Windows Command Prompt screen.
3) Enter the following command:
cwbinplg /REMOVE=IBM.BRMSPlugin
4) On the client/PC, start the iSeries Navigator.
5) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main System i
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.

CIRCUMVENTION FOR APAR 'SE66126' :
----------------------------------
None.


Activation Instructions

None.




Special Instructions

********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

Please end all BRMS jobs before applying this ptf.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI61152      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI61152      BRM-MAINT-INCORROUT Fixes-Sept 2016
   SI59998      BRM-MAINT-INCORROUT Fixes-June 2016
   SI60600      BRM-RECOVERY-THREADS-MSGCPF3878C BRMS RESTORE FROM PARALLEL
   SI58957      BRM-MAINT-INCORROUT Fixes-March 2016
   SI57831      BRM-MAINT-INCORROUT Fixes-Dec 2015
   SI57980      BRM PROBLEM REMOVING SYSTEM FROM BRMS NETWORK
   SI57980      BRM-MEDIA-LOOP WHEN APPENDING SAVES TO DUPLICATE MEDIA USING
   SI57214      BRM-MAINT-INCORROUT Fixes-Sept 2015
   SI56278      BRM-MAINT-INCORROUT  Fixes
   SI55731      BRM-MAINT-INCORROUT  Fixes
   SI54787      BRM-MAINT-INCORROUT  Fixes
   SI53306      BRM-MAINT-INCORROUT  Fixes
   SI52668      BRM-MAINT-INCORROUT  Fixes
   SI51641      BRM-MAINT-INCORROUT  Fixes
   SI50936      BRM-MAINT-INCORROUT  Fixes

Summary Information
System..............................  i
Models..............................  
Release.............................  V7R2M0
Licensed Program....................  5770BR1
APAR Fixed..........................  View details for APAR SE66126
Superseded by:......................  View fix details for PTF SI79121
Recompile...........................  N
Library.............................  QBRM
MRI Feature ........................  NONE
Cum Level...........................  C7068720

IBM i Support