PTF Cover Letter
PTF ( Program Temporary Fixes ) Cover letter
HASM-HA-F/QHACMN-T/QHAWRKCPP-RC5-MSGHAE0047 WRKCLU FAILS WIT
Pre/Co-Requisite PTF / Fix List
REQ LICENSED PTF/FIX LEVEL
TYPE PROGRAM RELEASE NUMBER MIN/MAX OPTION
---- -------- --------- ------- ------- ------
PRE 5770SS1 V7R2M0 SI60008 00/00 0000
PRE 5770SS1 V7R3M0 SI60242 00/00 0000
DIST 5770HAS V7R2M0 SE62185 NONE 0000 (SEE MRI PTF/FIX LIST BELOW)
MRI PTF/FIX LIST
----------------
APAR SE62185 AFFECTS THESE LANGUAGES. IF YOU HAVE ANY OF THESE
LANGUAGES INSTALLED, INSTALL THE DISTRIBUTION REQUISITE MRI PTF THAT
CORRESPONDS TO THE LANGUAGE(S) INSTALLED ON YOUR SYSTEM.
-----------------------------------------------------------------
: FEATURE LICENSED PTF/FIX :
: CODE LANGUAGE PROGRAM NUMBER :
: ------- ------------------------------- -------- ------- :
: 2924 ENGLISH UPPER/LOWER CASE SBCS 5770HAS SI57677 :
: 2902 ESTONIAN 5770HAS SI57678 :
: 2903 LITHUANIAN 5770HAS SI57679 :
: 2904 LATVIAN 5770HAS SI57680 :
: 2905 VIETNAMESE 5770HAS SI57681 :
: 2906 LAO 5770HAS SI57682 :
: 2909 BELGIAN ENGLISH 5770HAS SI57683 :
: 2911 SLOVENIAN 5770HAS SI57684 :
: 2912 CROATIAN 5770HAS SI57685 :
: 2913 MACEDONIAN 5770HAS SI57686 :
: 2914 SERBIAN 5770HAS SI57687 :
: 2922 PORTUGUESE 5770HAS SI57688 :
: 2923 DUTCH 5770HAS SI57689 :
: 2925 FINNISH 5770HAS SI57690 :
: 2926 DANISH 5770HAS SI57691 :
: 2928 FRENCH 5770HAS SI57692 :
: 2929 GERMAN 5770HAS SI57693 :
: 2930 JAPAN LOWER CASE 5770HAS SI57694 :
: 2931 SPANISH 5770HAS SI57695 :
: 2932 ITALIAN 5770HAS SI57696 :
: 2933 NORWEGIAN - BOKMAL 5770HAS SI57697 :
: 2937 SWEDISH 5770HAS SI57698 :
: 2938 ENGLISH UPPER CASE DBCS 5770HAS SI57699 :
: 2939 SWISS GERMAN 5770HAS SI57700 :
: 2940 SWISS FRENCH 5770HAS SI57701 :
: 2942 SWISS ITALIAN 5770HAS SI57702 :
: 2954 ARABIC 5770HAS SI57703 :
: 2956 TURKISH 5770HAS SI57704 :
: 2957 GREEK 5770HAS SI57705 :
: 2958 ICELANDIC 5770HAS SI57706 :
: 2961 HEBREW 5770HAS SI57707 :
: 2962 JAPANESE 5770HAS SI57708 :
: 2963 BELGIUM DUTCH 5770HAS SI57709 :
: 2966 BELGIUM FRENCH 5770HAS SI57710 :
: 2972 THAI 5770HAS SI57711 :
: 2974 BULGARIAN 5770HAS SI57712 :
: 2975 CZECH 5770HAS SI57713 :
: 2976 HUNGARIAN 5770HAS SI57714 :
: 2978 POLISH LANGUAGE 5770HAS SI57715 :
: 2979 RUSSIAN 5770HAS SI57716 :
: 2980 BRAZILIAN PORTUGUESE 5770HAS SI57717 :
: 2981 CANADIAN FRENCH 5770HAS SI57718 :
: 2984 ENGLISH UPPER/LOWER CASE DBCS 5770HAS SI57719 :
: 2986 KOREAN 5770HAS SI57720 :
: 2987 TRADITIONAL CHINESE 5770HAS SI57721 :
: 2989 SIMPLIFIED CHINESE 5770HAS SI57722 :
: 2992 ROMANIAN 5770HAS SI57723 :
: 2994 SLOVAKIAN 5770HAS SI57724 :
: 2995 ALBANIAN 5770HAS SI57725 :
: 2996 PORTUGUESE MNCS 5770HAS SI57726 :
: 2998 FARSI 5770HAS SI57727 :
-----------------------------------------------------------------
NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels. This PTF may be a prerequisite
for future PTFs. By applying this PTF you authorize and agree to the
foregoing.
This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF. You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.
SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.
The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.
APAR Error Description / Circumvention
-----------------------------------------------
When attempting to enter the cluster menu via WRKCLU, the
request may fail with MSGHAE0047 RC5 even with proper licensing.
There is a code enhancement being created to avoid this error
and allow access to the cluster menu.
CORRECTION FOR APAR SE65562 :
-----------------------------
The PowerHA license checking will ignore PowerHA options not
installed that are not required for the function being checked.
CIRCUMVENTION FOR APAR SE65562 :
--------------------------------
None.
Activation Instructions
None.
Special Instructions
On each node in the cluster, end clustering, apply the fix, and then
start clustering. It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.
********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI62155 :
=================================================
In order to fix the problems described by this PTF, the PTF must be
applied on all nodes in the cluster.
However,the entire cluster does not have to be ended to do this. One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48770 :
=================================================
Before applying this PTF, the PTF SI46592 for product
5770SS1 must be applied.
Before applying or removing this PTF you must run:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
After applying or removing this PTF you must run:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48919 :
=================================================
Before applying or removing this PTF you must run:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
After applying or removing this PTF you must run:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI45301 :
=================================================
In order for this fix to be fully activated, you must restart the
ADMIN2 instance of the HTTP server. You can do this with the following
commands:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI44995 :
=================================================
You must restart the HTTP server after this PTF is applied:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI43376 :
=================================================
This fix is not activated until you restart the HTTP server ADMIN
instance. This is done by the following two commands:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
Once all of the HTTP server ADMIN instance jobs have ended, do the
following command to activate this fix.
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
When the HTTP server ADMIN instance has completely started, this fix
will be active.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI52984 :
=================================================
The helptext for RTVASPSSN has an incorrect structure for the ASPCPY
parameter. The Number of ASP Copy Descriptions and the Length of each
ASP copy description entry fields have been reversed. The helptext
will be updated in a future release to show the correct layout.
The current help text indicates the field layout is:
Position Length Field
1 4 byte integer Offset from beginning of
ASPCPY to the first ASP copy
description entry
5 4 byte integer Number of ASP copy
description entries
9 4 byte integer Length of an ASP copy
description entry
The correct field layout is:
Position Length Field
1 4-byte integer number Offset from beginning of
ASPCPYLST
to first ASP copy
description list entry
5 4-byte integer number Length of each ASP copy
description list entry
9 4-byte integer number Number of ASP copy
description entries
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48371 :
=================================================
This PTF is an Add Function PTF which must be permanently applied.
Removal of this PTF after step #4 below is not supported.
You must have the most recent level of PTF group SF99368.
Step #1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
Step #2:
You must restart the *ADMIN instance of the *HTTP server. Do this
with the following commands:
ENDTCPSVR SERVER(*HTTP) INSTANCE(*ADMIN)
STRTCPSVR SERVER(*HTTP) INSTANCE(*ADMIN)
Step #3:
Users must sign off any active sessions which may be using,
PowerHA and sign back on after the PTF has been applied.
Step #4:
After the PTF has been applied on all of the nodes in the
cluster which have PowerHA installed, you must upgrade
the PowerHA version to 2.2.
If your cluster is currently at PowerHA version 1.0,
you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1VER)
CLUVER(*SAME)
After your cluster is at PowerHA version 2.0, you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)
After your cluster is at PowerHA version 2.1, you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42638 :
=================================================
In order for the issue to be resolved completely, this fix needs to be
on all the active cluster nodes participating in the cluster
administrative domain. Failure to do so would cause PRTDEV MREs with
IGCFEAT as one of the monitored attributes to go INCONSISTENT in
certain circumstances.
Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.
The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change Cluster
Recovery CL command.
To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)
where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.
You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.
After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)
where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.
After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster. You can restart the QPRFSYNCH job
with the following commands:
CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI36365 :
=================================================
In order to fix the problems described by this PTF, the PTF must be
applied on every node in the cluster. You do not have to end the
cluster to do this. However, you must end the CRG jobs associated with
the cluster administrative domain on every cluster node before you
apply the PTF. You can do this one node at a time.
Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.
The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change Cluster
Recovery CL command.
To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)
where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.
You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.
After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)
where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.
After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster. You can restart the QPRFSYNCH job
with the following commands:
CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI46628 :
=================================================
If you are a multiple system user, and intend on installing this PTF on
a system, then saving and restoring product 5770HAS onto other systems,
then you need to run the following command on the other systems after
restoring product 5770HAS:
QSYS/CALL PGM(QHASM/QPZ1HA03)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48012 :
=================================================
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI45741 :
=================================================
Step 1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
Step 2:
You must restart the ADMIN2 instance of the *HTTP server. Do this
with the following commands:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
Step 3:
Users must sign off any active sessions which may be using
PowerHA and sign back on after the PTF has been applied.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI44148 :
=================================================
This PTF is an Add Function PTF which must be permanently applied.
Removal of this PTF after step #4 below is not supported.
You must have the most recent PTF group SF99368.
You must install PRPQ 5799-HAS in order to use the functions
provided in this PTF.
Step #1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
Step #2:
You must restart the *ADMIN instance of the *HTTP server. Do this
with the following commands:
ENDTCPSVR SERVER(*HTTPSVR) INSTANCE(*ADMIN)
STRTCPSVR SERVER(*HTTPSVR) INSTANCE(*ADMIN)
Step #3:
Users must sign off any active sessions which may be using,
PowerHA and sign back on after the PTF has been applied.
Step #4:
After the PTF has been applied on all of the nodes in the
cluster which have PowerHA installed, you must upgrade
the PowerHA version to 2.1.
If your cluster is currently at PowerHA version 1.0,
you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1VER)
CLUVER(*SAME)
After your cluster is at PowerHA version 2.0, you must:
CHGCLUVER CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI36179 :
=================================================
End Cluster Resource Services on the node using the ENDCLUNOD command,
apply the PTF, signoff/signon, and then restart Cluster Resource
Services using the STRCLUNOD command.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI47000 :
=================================================
In order for this PTF to be fully activated, you must restart
the ADMIN2 instance of the *HTTP server. Do this with the
following commands:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI57302 :
=================================================
In order to fix the problems described by this PTF, the PTF must be
applied on every node in the cluster. You do not have to end the
cluster to do this. However, you should end the CRG jobs associated
with the cluster administrative domain on every cluster node before
you apply the PTF. You can do this one node at a time.
Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix
is available.
The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative
domain jobs without ending your cluster nodes by calling the Change
Cluster Recovery CL command.
To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)
where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.
You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.
After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:
CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)
where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.
After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster. You can restart the QPRFSYNCH job
with the following commands:
CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI54321 :
=================================================
In order to fix the problems described by this PTF, the PTF must be
applied on all nodes (on the same release as this PTF) in the cluster.
However,the entire cluster does not have to be ended to do this. One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.
Note, you must end Cluster Resource Services on the node, apply the
PTF,and then restart Cluster Resource Services before the fix is
available.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI52665 :
=================================================
On each node in the cluster, end clustering, apply the fix, and then
start clustering. It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.
Step #1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job. You can do this by ending and starting the cluster
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Or, you can end the QHASVR job under QSYSWRK subsystem:
ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)
where <job-num> is the job number.
Issue the WRKCLU command to restart the QHASVR job.
Step #2:
In order for this PTF to be fully activated, you must restart
the ADMIN2 instance of the *HTTP server. Do this with the
following commands:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
Step #3:
Users must sign off any active sessions which may be using,
PowerHA and sign back on after the PTF has been applied.
SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI51113 :
=================================================
Step #1:
In order for this PTF to be fully activated, you must end the cluster
and HTTP server. You can do this by ending the cluster node and server
using the commands:
node using the commands:
ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
ENDSBS SBS(QHTTPSVR) OPTION(*IMMED)
Step #2:
Users must sign off any active sessions which may be using,
PowerHA and sign back on after the PTF has been applied.
Step #3:
Start the server and cluster using the commands:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
Default Instructions
THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.
Supersedes
PTF/FIX NO(S). APAR TITLE LINE
-------------- ------------------------------------------------------------
SI62155 HASM-HA-MSGMCH3601 CHGCRGPRI ENCOUNTERS MSGMCH3601.
SI61243 HASM-HA-MSGHAE2057 STRSVCSSN *FLASHCOPY V7000 FAILS HAE2057
SI60530 INCORROUT PowerHA fixes
SI60530 In a DS8000 PowerHA MetroMirror environment, a resume of the
SI60530 HASM-INCORROUT Fix Device Domain Data
SI60530 HASM-INCORROUT Fix Device Domain Data Session Serviceability
SI60530 OSP-OTHER-MSGHAE2040 CHGCRGPRI GMIR SVC FAILS MSGHAE2040
SI57509 HAS-NEW HYPERSWAP FUNCTION MRM
SI57509 Hyperswap LUN Switch Fixes
SI57509 HASM-HA-UNPRED CHGCRGPRI IS NOT DROPPING AND ADDING ALL HOST
SI57509 HASM-HA-MSGCPI096E EVERY TIME THEY IPL THE TARGET FLASH COPY
SI59974 i SW FST: DSPASPSSN Results in a CPF6A39 Message (Variable b
SI57636 HyperSwap Stage 2
SI57636 HASM-HA-UNPRED PREVENT QHAUSRPRF FROM LOSING AUTHORITY TO /Q
SI57636 OSP AFTER UPGRADE TO R720 ON FLASH TARGET - STRFLASH FAILS -
SI55011 HA-INCORROUT RTVASPSSN Value does not match DSPASPSSN value
SI58036 HASM-HA-WAIT LARGE SVC ENVIRONMENT RESULTS IN INELIGIBLE TAR
SI58000 HASM-HA-LOOP DSPASPSSN HANG WHEN A NODE IS IN PARTITION STAT
SI58000 HASM-HA-F/QCARULE-T/QC2SYS-MSGCPD0030 WRKASPCPYD WITH OPTION
SI57958 HA-Adding Support for FlashCopy option -multiinc
SI57302 HASM-HA-UNPRED AUTHORIZATION LIST ENTRIES ARE CHANGED TO *EX
SI57177 OSP-INCORROUT Correct minor PowerHA license problems
SI56917 PowerHA GUI - Support of Liberty infrastructure
SI55982 Fixed a problem on PowerHA GUI that extra messages will pop
SI55603 HASM-INCORROUT MCH3601 RECEIVED ON STRASPSSN AT HA VER 2.2
SI55303 INCORROUT GUI problems - Multiple GUI fixes for PowerHA GUI
SI54321 HASM-INCORROUT INCONSISTENT DEVICE DOMAIN DATA
SI54321 HASM-HA-F/QHACMN-T/QYASPSSN-MSGCPF22E6/MSGCPF22E7 ENCOUNTERE
SI53938 HASM-HA-UNPRED straspssn command parameters not working
SI53938 HASM-HA-LOOP RUNNING ENDSVCSSN RESULTS IN LOOPING CONDITION
SI53638 HASM-WAIT ENDSVCSSN hangs when SVC volume status is degraded
SI53631 HASM-INCORROUT REATTACH of ASP Session inquiry instead of co
SI53608 HASM-HA MULTIPLE LUNS IN 1 VOLUME GROUP AT POWERHA VERSION 1
SI53608 HASM-HA CPFAF02 INTERNAL APPLICATION ERROR. DIAGNOSTIC CODE
SI53480 HASM-HA-INCORROUT CHGCRGPRI GLOBAL MIRROR POWERHA
SI53476 New function to support SVC and Storwize Global Mirror with
SI53476 MSGCPIB711-HLIC-94XXDISK IN MULTIPATH ENVIRONMENT, ENDSVCSSN
SI53003 INCORROUT No target flash copy not allowed when source node
SI52665 INCORROUT - Fixes of the bugs found in PowerHA in 7.2 releas
SI51113 PowerHA 7.2 TVT
SI51913 OSP-INCORROUT PowerHA pre-GA fixes
SI51913 HA-INCORROUT Node Fails to Join Recovery Group when Cluster
Summary Information
System.............................. i
Models..............................
Release............................. V7R2M0
Licensed Program.................... 5770HAS
APAR Fixed.......................... View details for APAR SE65562
Superseded by:...................... View fix details for PTF SI80112
Recompile........................... N
Library............................. QHASM
MRI Feature ........................ NONE
Cum Level........................... C6299730
IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.
Was this topic helpful?
Document Information
Modified date:
29 June 2022