IBM Support

SI58958 - BRM-MAINT-INCORROUT Fixes-March 2016

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

BRM-MAINT-INCORROUT Fixes-March 2016


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED      PTF/FIX  LEVEL

TYPE PROGRAM  REL  NUMBER   MIN/MAX  OPTION
---- -------- ---  -------  -------  ------
PRE  5770SS1  710  SI47250   00/00    0000
DIST 5770BR1  710  SE52441   NONE     0000 (SEE MRI PTF/FIX LIST BELOW)

MRI PTF/FIX LIST
----------------
APAR SE52441 AFFECTS THESE LANGUAGES.  IF YOU HAVE ANY OF THESE
LANGUAGES INSTALLED, INSTALL THE DISTRIBUTION REQUISITE MRI PTF THAT
CORRESPONDS TO THE LANGUAGE(S) INSTALLED ON YOUR SYSTEM.
-----------------------------------------------------------------
:  FEATURE                                   LICENSED  PTF/FIX  :
:  CODE     LANGUAGE                         PROGRAM   NUMBER   :
:  -------  -------------------------------  --------  -------  :
:  2924     ENGLISH UPPER/LOWER CASE SBCS    5770BR1   SI47215  :
:  2902     ESTONIAN                         5770BR1   SI47496  :
:  2903     LITHUANIAN                       5770BR1   SI47497  :
:  2904     LATVIAN                          5770BR1   SI47498  :
:  2905     VIETNAMESE                       5770BR1   SI47499  :
:  2906     LAO                              5770BR1   SI47500  :
:  2909     BELGIAN ENGLISH                  5770BR1   SI47501  :
:  2911     SLOVENIAN                        5770BR1   SI47502  :
:  2912     CROATIAN                         5770BR1   SI47218  :
:  2913     MACEDONIAN                       5770BR1   SI47503  :
:  2914     SERBIAN                          5770BR1   SI47504  :
:  2922     PORTUGUESE                       5770BR1   SI47219  :
:  2923     DUTCH                            5770BR1   SI47220  :
:  2925     FINNISH                          5770BR1   SI47505  :
:  2926     DANISH                           5770BR1   SI47506  :
:  2928     FRENCH                           5770BR1   SI47221  :
:  2929     GERMAN                           5770BR1   SI47222  :
:  2930     JAPAN LOWER CASE                 5770BR1   SI47223  :
:  2931     SPANISH                          5770BR1   SI47224  :
:  2932     ITALIAN                          5770BR1   SI47507  :
:  2933     NORWEGIAN - BOKMAL               5770BR1   SI47509  :
:  2937     SWEDISH                          5770BR1   SI47510  :
:  2938     ENGLISH UPPER CASE DBCS          5770BR1   SI47225  :
:  2939     SWISS GERMAN                     5770BR1   SI47226  :
:  2940     SWISS FRENCH                     5770BR1   SI47227  :
:  2942     SWISS ITALIAN                    5770BR1   SI47513  :
:  2954     ARABIC                           5770BR1   SI47228  :
:  2956     TURKISH                          5770BR1   SI47514  :
:  2957     GREEK                            5770BR1   SI47515  :
:  2958     ICELANDIC                        5770BR1   SI47516  :
:  2961     HEBREW                           5770BR1   SI47517  :
:  2962     JAPANESE                         5770BR1   SI47229  :
:  2963     BELGIUM DUTCH                    5770BR1   SI47230  :
:  2966     BELGIUM FRENCH                   5770BR1   SI47231  :
:  2972     THAI                             5770BR1   SI47518  :
:  2974     BULGARIAN                        5770BR1   SI47519  :
:  2975     CZECH                            5770BR1   SI47232  :
:  2976     HUNGARIAN                        5770BR1   SI47233  :
:  2978     POLISH LANGUAGE                  5770BR1   SI47234  :
:  2979     RUSSIAN                          5770BR1   SI47235  :
:  2980     BRAZILIAN PORTUGUESE             5770BR1   SI47520  :
:  2981     CANADIAN FRENCH                  5770BR1   SI47236  :
:  2984     ENGLISH UPPER/LOWER CASE DBCS    5770BR1   SI47237  :
:  2986     KOREAN                           5770BR1   SI47238  :
:  2987     TRADITIONAL CHINESE              5770BR1   SI47521  :
:  2989     SIMPLIFIED CHINESE               5770BR1   SI47522  :
:  2992     ROMANIAN                         5770BR1   SI47239  :
:  2994     SLOVAKIAN                        5770BR1   SI47523  :
:  2995     ALBANIAN                         5770BR1   SI47524  :
:  2996     PORTUGUESE MNCS                  5770BR1   SI47240  :
:  2998     FARSI                            5770BR1   SI47539  :
-----------------------------------------------------------------




NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
It is important to keep all systems in a BRMS network at the
same level of BRMS PTFs.
Fixes included in this PTF may reference enhancements. More
information on these enhancements can be found on the BRMS web
page:
www.ibm.com/developerworks/ibmi/brms
Additionally also review the media web page:
www.ibm.com/developerworks/ibmi/media

Fixes in this PTF:
1. In 7.1 and later, the Save Object using BRM (SAVOBJBRM)
command may incorrectly include message MSGCPF3763 in the job
log and the BRMS log.
2. In 7.1 and later, when the Work with Devices using BRM
(WRKDEVBRM) command is run, option 2=Change is selected for a
device and F4=Prompt is pressed to list densities for the Allow
densities Read field, not all supported densities are listed.
3. In 7.1 and later, when the Work with Policies using BRM
(WRKPCYBRM) command is run with *MED specified for the Policy
type (TYPE) parameter and option 2=Change is selected for a
media policy, F4=Prompt does not update Automatic duplication
fields.
4. In 7.1 and later, when the Work with Media Information
(WRKMEDIBRM) command is run with option 2=Change specified for a
saved item and the expiration date is changed, the expiration
date for all the saved item's parallel volumes may not be
updated.
5. In 7.1 and later, BRMS has been enhanced to support volume
selection priority for output volumes during BRMS operations.
6. In 7.1, when a BRMS saved item is deleted from a system in a
BRMS network, the saved item may not be deleted from other
systems in the BRMS network.
7. In 7.1 and later, BRMS Enterprise report definitions have
been enhanced to allow values other than *LCL to be specified
for the From system (FROMSYS) on the Print Report using BRM
(PRTRPTBRM) command.
8. In 7.1 and later, the Duplicate Media using BRM (DUPMEDBRM)
command has been enhanced to clarify why the value specified on
the To volume (TOVOL) parameter was changed to *MOUNTED if the
original TOVOL value is not used during the duplication.
9. In 7.1 and later, when the Duplicate Media using BRM
(DUPMEDBRM) command is run with 1 specified for the To sequence
number (TOSEQNBR) parameter for a remote duplication and data
area QUSRBRM/Q1AALWMFDP exists, the job may be incorrectly
interrupted with inquiry message MSGBRM148A.
10. In 7.1 and later, if the Duplicate Media using BRM
(DUPMEDBRM) command is run to do remote duplication when
FlashCopy is configured for independent auxiliary storage pools
(IASP), saved history for IASPs may not be processed and the
DUPMEDBRM resume key may not be set.
11. N/A.
12. In 7.2 and later, when the Migrate using BRM (MGRBRM)
command is run with *SSD or *NONSSD specified for the To asp
(TOASP) parameter and a value other than *OBJ is specified for
the Type (TYPE) parameter, the command will incorrectly fail
with message MSGMCH1202.
13. In 7.1 and later, when the Migrate using BRM (MGRBRM)
command is run with an independent auxiliary storage pool (IASP)
that is varied off specified for To asp (TOASP) parameter, the
message replacement data for message MSGCPF9873 is incorrect.
14. In 7.1 and later, when independent auxiliary storage pool
(IASP) FlashCopy is configured and remote duplication is run by
specifying the From system (FROMSYS) parameter on the Duplicate
Media using BRM (DUPMEDBRM) command, after the duplication
completes, the system that owns the media may incorrectly be set
to the system that performed the remote duplication.
15. In 7.1 and later, when using the Restore Library using BRM
(RSTLIBBRM) command to restore data to a newly created auxiliary
storage pool (ASP), the restore may fail with message
MSGBRM2112.
16. In 7.1 and later, when the Save System using BRM (SAVSYSBRM)
command, the Save Library using BRM (SAVLIBBRM) command or the
Start Backup using BRM (STRBKUBRM) command for a control group
with *SAVCFG/*SAVSECDTA/*SAVSYS entries is run,  volume
information for the saved item may be incorrect.
17. In 7.1 and later, after upgrading systems from 6.1 or
earlier, independent auxiliary storage pool (IASP) FlashCopy
configuration may be lost.
18. N/A.
19. In 7.2 and later, when the Save Object List using BRM
(SAVOBJLBRM) command or the Start Backup using BRM (STRBKUBRM)
command is run using an object list to backup of all objects in
the QSYS library, the save may fail with messages MSGCPF387B and
MSGBRM1820.
20. N/A.
21. In 7.1 and later, when the Work with Media Information
(WRKMEDIBRM) is run and option 7=Restore is specified for a
saved item, and Option 7=Specify object is specified to restore
any object that were saved on a system that is not in the BRMS
network, the option may fail with messages MSGRNQ0121,
MSGMCH0603 and MSGBRM4126.
22. In 7.1 and later, when restoring from media that was saved
using parallel devices, the restore may hang.
23. In 7.1 and later, the Libraries to omit (OMITLIB) parameter
and the Objects to omit (OMITOBJ) parameter have been added to
the  Restore Library using BRM (RSTLIBBRM) command and the
Objects to omit (OMITOBJ) parameter has been added to the
Restore Object using BRM (RSTOBJBRM) command.


CORRECTION FOR APAR 'SE63579' :
-------------------------------
Load and apply this PTF.

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


----------------------------------------------------------------
------------------------------------

Enable the BRMS plug-in for System i Navigator Windows/OS
client.
==== Pre-V6R1:
1) Close the System i Navigator application.
2) On the client/PC, uninstall the BRMS plug-in using the
Client

Access Express "Selective Setup" utility:  from the
Windows
"Start", select
"Programs->IBM iSeries Access for Windows->Selective
Setup".

Follow the instructions on the dialogs to uninstall the
BRMS

plug-in.  Notes:
a) On the second dialog, select the radio button "Ignore.
I'm
only going to UN-install components".
b) On the next screen, "Component Selection", open the
System i Navigator folder; a list of all installed
System i Navigator components and plug-ins is displayed.
c) Deselect the BRMS plug-in to uninstall it (if you do
not
see the BRMS plug-in, it was not properly installed);
reboot the PC if requested.
3) Start System i Navigator.
4) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main iSeries
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.

=== V6R1 and newer:
1) Close the System i Navigator application.
2) Open a Windows Command Prompt screen.
3) Enter the following command:
cwbinplg /REMOVE=IBM.BRMSPlugin
4) On the client/PC, start the iSeries Navigator.
5) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main System i
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system
to install from, select the iSeries that has the new BRMS
PTF installed.

CIRCUMVENTION FOR APAR 'SE63579' :
----------------------------------
None.


Activation Instructions


None.




Special Instructions


********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI57979:
================================================

Note: When loading BRMS PTFs, the system needs to be out of
FlashCopy mode for the PTF to apply.
To verify the FlashCopy status of a system is *END, enter the
following command:
CALL PGM(QBRM/Q1AOLD) PARM('FLSSYSSTS ' '*DISPLAY')

After the BRMS PTF is installed, do the following to enable the
BRMS plug-in for the IBM Systems Director Navigator for i5/OS
(web browser) or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator
for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS
users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI57213:
================================================

All BRMS activity must be stopped while this ptf is

being applied and users must signoff and on again

before using BRMS after the ptf is applied.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI57830      BRM-MAINT-INCORROUT Fixes-Dec 2015
   SI57979      BRM PROBLEM REMOVING SYSTEM FROM BRMS NETWORK
   SI57979      BRM-MEDIA-LOOP WHEN APPENDING SAVES TO DUPLICATE MEDIA USING
   SI57213      BRM-MAINT-INCORROUT Fixes-Sept 2015
   SI56275      BRM-MAINT-INCORROUT  Fixes
   SI55621      BRM-MAINT-INCORROUT  Fixes
   SI54786      BRM-MAINT-INCORROUT  Fixes
   SI53305      BRM-MAINT-INCORROUT  Fixes
   SI52670      BRM-MAINT-INCORROUT  Fixes
   SI51667      BRM-MAINT-INCORROUT  Fixes
   SI51029      BRM-MAINT-INCORROUT  Fixes
   SI50292      BRM-MAINT-INCORROUT  Fixes
   SI50292      BRM-MAINT-INCORROUT  Fixes
   SI50292      BRM-MAINT-INCORROUT  Fixes
   SI49719      BRM-MAINT-INCORROUT  Fixes
   SI48969      BRM-MAINT-INCORROUT  Fixes
   SI47935      BRM-MAINT-INCORROUT  Fixes
   SI47039      BRM-MAINT-INCORROUT  Fixes
   SI46340      BRM-MAINT-INCORROUT  Fixes
   SI45327      BRM-MAINT-INCORROUT  Fixes
   SI44710      BRM-MAINT-INCORROUT  Fixes
   SI43868      BRM-MAINT-INCORROUT  Fixes
   SI42925      BRM-MAINT-INCORROUT  Fixes
   SI42066      BRM-MAINT-INCORROUT  Fixes
   SI42449      BRM-BACKUP-INCORROUT OWNERSHIP OF MEDIA IS CHANGED AFTER BAC
   SI41206      BRM-MAINT-INCORROUT  Fixes
   SI40005      BRM-MAINT-INCORROUT  Fixes
   SI40005      BRM-MAINT-INCORROUT  Fixes
   SI38740      BRM-MAINT-INCORROUT  Fixes
   SI38740      BRM-MAINT-INCORROUT  Fixes
   SI37987      BRM-MAINT-INCORROUT  Fixes
   SI37264      BRM-MAINT-INCORROUT  Fixes
   SI37264      BRM-MAINT-INCORROUT LARGE AMOUNT OF RECORDS PUT INTO QA1ANET
   SI35676      BRM-BACKUP-MSGBRM400F WHEN RUNNING A CONTROL GROUP WITH A *S
   SI35676      BRM-MAINT-INCORROUT  Fixes
   SI35676      BRM-MAINT-INCORROUT  Fixes
   SI35676      BRM-MAINT-INCORROUT  Fixes
   SI35676      BRM-MAINT-INCORROUT  Client Fixes

Summary Information

System..............................i
Models..............................
Release.............................V7R1M0
Licensed Program...............5770BR1
APAR Fixed..........................View details for APAR SE63579
Superseded by:......................View fix details for PTF SI71641
Recompile...........................N
Library.............................QBRM
MRI Feature ........................NONE
Cum Level...........................C6120710


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Type":"MASTER","Line of Business":{"code":"LOB57","label":"Power"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SWG60","label":"IBM i"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.1.0"},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG15V","label":"PTF Cover Letters - OS\/400 General"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R1M0","Edition":"","Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
08 March 2016