IBM Support

SI56937 - PowerHA GUI - Support of Liberty infrastructure

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

PowerHA GUI - Support of Liberty infrastructure


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED      PTF/FIX  LEVEL

TYPE PROGRAM  REL  NUMBER   MIN/MAX  OPTION
---- -------- ---  -------  -------  ------
PRE  5770SS1  710  SI53886   00/00    0000
PRE  5770SS1  710  SI48522   00/00    0000
PRE  5770SS1  710  SI48540   00/00    0000
PRE  5770SS1  710  SI44141   00/00    0000
PRE  5770SS1  710  SI44326   00/00    0000
PRE  5770SS1  710  SI40309   00/00    0000
DIST 5770SS1  710  SI46592   NONE     0003
DIST 5770SS1  710  SI46591   NONE     0003
DIST 5770HAS  710  SE53364   NONE     0000 (SEE MRI PTF/FIX LIST BELOW)

MRI PTF/FIX LIST
----------------
APAR SE53364 AFFECTS THESE LANGUAGES.  IF YOU HAVE ANY OF THESE
LANGUAGES INSTALLED, INSTALL THE DISTRIBUTION REQUISITE MRI PTF THAT
CORRESPONDS TO THE LANGUAGE(S) INSTALLED ON YOUR SYSTEM.
-----------------------------------------------------------------
:  FEATURE                                   LICENSED  PTF/FIX  :
:  CODE     LANGUAGE                         PROGRAM   NUMBER   :
:  -------  -------------------------------  --------  -------  :
:  2924     ENGLISH UPPER/LOWER CASE SBCS    5770HAS   SI48316  :
:  2902     ESTONIAN                         5770HAS   SI48317  :
:  2903     LITHUANIAN                       5770HAS   SI48318  :
:  2904     LATVIAN                          5770HAS   SI48319  :
:  2905     VIETNAMESE                       5770HAS   SI48320  :
:  2906     LAO                              5770HAS   SI48321  :
:  2909     BELGIAN ENGLISH                  5770HAS   SI48322  :
:  2911     SLOVENIAN                        5770HAS   SI48323  :
:  2912     CROATIAN                         5770HAS   SI48324  :
:  2913     MACEDONIAN                       5770HAS   SI48325  :
:  2914     SERBIAN                          5770HAS   SI48326  :
:  2922     PORTUGUESE                       5770HAS   SI48327  :
:  2923     DUTCH                            5770HAS   SI48328  :
:  2925     FINNISH                          5770HAS   SI48329  :
:  2926     DANISH                           5770HAS   SI48330  :
:  2928     FRENCH                           5770HAS   SI48331  :
:  2929     GERMAN                           5770HAS   SI48332  :
:  2930     JAPAN LOWER CASE                 5770HAS   SI48333  :
:  2931     SPANISH                          5770HAS   SI48334  :
:  2932     ITALIAN                          5770HAS   SI48335  :
:  2933     NORWEGIAN - BOKMAL               5770HAS   SI48336  :
:  2937     SWEDISH                          5770HAS   SI48337  :
:  2938     ENGLISH UPPER CASE DBCS          5770HAS   SI48338  :
:  2939     SWISS GERMAN                     5770HAS   SI48339  :
:  2940     SWISS FRENCH                     5770HAS   SI48340  :
:  2942     SWISS ITALIAN                    5770HAS   SI48341  :
:  2954     ARABIC                           5770HAS   SI48342  :
:  2956     TURKISH                          5770HAS   SI48343  :
:  2957     GREEK                            5770HAS   SI48344  :
:  2958     ICELANDIC                        5770HAS   SI48345  :
:  2961     HEBREW                           5770HAS   SI48346  :
:  2962     JAPANESE                         5770HAS   SI48347  :
:  2963     BELGIUM DUTCH                    5770HAS   SI48348  :
:  2966     BELGIUM FRENCH                   5770HAS   SI48349  :
:  2972     THAI                             5770HAS   SI48350  :
:  2974     BULGARIAN                        5770HAS   SI48351  :
:  2975     CZECH                            5770HAS   SI48352  :
:  2976     HUNGARIAN                        5770HAS   SI48353  :
:  2978     POLISH LANGUAGE                  5770HAS   SI48354  :
:  2979     RUSSIAN                          5770HAS   SI48355  :
:  2980     BRAZILIAN PORTUGUESE             5770HAS   SI48356  :
:  2981     CANADIAN FRENCH                  5770HAS   SI48357  :
:  2984     ENGLISH UPPER/LOWER CASE DBCS    5770HAS   SI48358  :
:  2986     KOREAN                           5770HAS   SI48359  :
:  2987     TRADITIONAL CHINESE              5770HAS   SI48360  :
:  2989     SIMPLIFIED CHINESE               5770HAS   SI48361  :
:  2992     ROMANIAN                         5770HAS   SI48362  :
:  2994     SLOVAKIAN                        5770HAS   SI48363  :
:  2995     ALBANIAN                         5770HAS   SI48364  :
:  2996     PORTUGUESE MNCS                  5770HAS   SI48365  :
:  2998     FARSI                            5770HAS   SI48366  :
-----------------------------------------------------------------




NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.





APAR Error Description / Circumvention

-----------------------------------------------
PowerHA GUI needs to support Liberty infrastructure. The PTF
provides the way the deploy the PowerHA GUI under Liberty
environment.

CORRECTION FOR APAR SE61958 :
-----------------------------
With the PTF, PowerHA can run under the environment of Liberty.

CIRCUMVENTION FOR APAR SE61958 :
--------------------------------
None.


Activation Instructions


None.




Special Instructions


********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48770 :
=================================================

Before applying this PTF, the PTF SI46592 for product
5770SS1 must be applied.

Before applying or removing this PTF you must run:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

After applying or removing this PTF you must run:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48919 :
=================================================

Before applying or removing this PTF you must run:
ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

After applying or removing this PTF you must run:
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI45301 :
=================================================

In order for this fix to be fully activated, you must restart the
ADMIN2 instance of the HTTP server.  You can do this with the following
commands:

ENDTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR SERVER(*IAS) INSTANCE(ADMIN2)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI44995 :
=================================================

You must restart the HTTP server after this PTF is applied:

ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI43376 :
=================================================

This fix is not activated until you restart the HTTP server ADMIN
instance.  This is done by the following two commands:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
Once all of the HTTP server ADMIN instance jobs have ended, do the
following command to activate this fix.
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
When the HTTP server ADMIN instance has completely started, this fix
will be active.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI56012 :
=================================================

In order to fix the problems described by this PTF, the PTF must be
applied on all nodes in the cluster.
However,the entire cluster does not have to be ended to do this.  One
node at a time can be ended, the PTF applied, and the node restarted to
join the cluster.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI53002 :
=================================================

On each node in the cluster, end clustering, apply the fix, and then
start clustering. It is not necessary to update all nodes at the same
time, however, any node without the fix will continue to be a potential
source of the problem.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI52984 :
=================================================

The helptext for RTVASPSSN has an incorrect structure for the ASPCPY
parameter.  The Number of ASP Copy Descriptions and the Length of each
ASP copy description entry fields have been reversed.  The helptext
will be updated in a future release to show the correct layout.

The current help text indicates the field layout is:

Position  Length                 Field
1         4 byte integer         Offset from beginning of
ASPCPY to the first ASP copy
description entry
5         4 byte integer         Number of ASP copy
description entries
9         4 byte integer         Length of an ASP copy
description entry

The correct field layout is:
Position  Length                 Field
1         4-byte integer number  Offset from beginning of
ASPCPYLST
to first ASP copy
description list entry
5         4-byte integer number  Length of each ASP copy
description list entry
9         4-byte integer number  Number of ASP copy
description entries

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48371 :
=================================================

This PTF is an Add Function PTF which must be permanently applied.
Removal of this PTF after step #4 below is not supported.

You must have the most recent level of PTF group SF99368.

Step #1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job.  You can do this by ending and starting the cluster
node using the commands:

ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)

Or, you can end the QHASVR job under QSYSWRK subsystem:

ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)

where <job-num> is the job number.

Issue the WRKCLU command to restart the QHASVR job.

Step #2:
You must restart the *ADMIN instance of the *HTTP server.  Do this
with the following commands:

ENDTCPSVR  SERVER(*HTTP) INSTANCE(*ADMIN)
STRTCPSVR  SERVER(*HTTP) INSTANCE(*ADMIN)

Step #3:
Users must sign off any active sessions which may be using,
PowerHA and sign back on after the PTF has been applied.

Step #4:
After the PTF has been applied on all of the nodes in the
cluster which have PowerHA installed, you must upgrade
the PowerHA version to 2.2.

If your cluster is currently at PowerHA version 1.0,
you must:

CHGCLUVER  CLUSTER(<cluster-name>) HAVER(*UP1VER)
CLUVER(*SAME)

After your cluster is at PowerHA version 2.0, you must:

CHGCLUVER  CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)

After your cluster is at PowerHA version 2.1, you must:

CHGCLUVER  CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI49232 :
=================================================

In order to fix the problems described by this PTF, the PTF must be
applied on every node in the cluster. You do not have to end the
cluster to do this. However, you should end the CRG jobs associated
with the cluster administrative domain on every cluster node before you
apply the PTF. You can do this one node at a time.

Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.

The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change
Cluster Recovery CL command.

To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)

where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.

You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.

After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)

where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.

After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster.  You can restart the QPRFSYNCH job
with the following commands:

CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI42638 :
=================================================

In order for the issue to be resolved completely, this fix needs to be
on all the active cluster nodes participating in the cluster
administrative domain.  Failure to do so would cause PRTDEV MREs with
IGCFEAT as one of the monitored attributes to go INCONSISTENT in
certain circumstances.

Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.

The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change Cluster
Recovery CL command.

To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.

If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)

where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.

You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.

After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)

where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.

After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster.  You can restart the QPRFSYNCH job
with the following commands:

CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI36365 :
=================================================

In order to fix the problems described by this PTF, the PTF must be
applied on every node in the cluster. You do not have to end the
cluster to do this. However, you must end the CRG jobs associated with
the cluster administrative domain on every cluster node before you
apply the PTF. You can do this one node at a time.

Note, you must end the cluster administrative domain CRG jobs on each
cluster node, apply the PTF, and restart the CRG job before the fix is
available.

The cluster administrative domain CRG jobs will be ended if you end
Cluster Resource Services for each node in your cluster. Cluster
Resource Services can be ended using the End Cluster Node API or CL
command. Optionally, you can end just the cluster administrative domain
jobs without ending your cluster nodes by calling the Change Cluster
Recovery CL command.

To determine if any cluster administrative domain jobs are active on
your system, use the WRKACTJOB command from the command line of your
system. Look for any system jobs which have the same name as any
cluster administrative domains which you have created in your cluster.
If there are any cluster administrative domain jobs on your system,
they must be ended. You can end just the cluster administrative domain
jobs on every node with this command:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(*ALL)
ACTION(*END)

where <cluster> is the name of your cluster and <admin_domain> is the
name of a cluster administrative domain. You should call this command
once for each cluster administrative domain in your cluster.

You must sign off all sessions where any cluster administrative domain
commands or APIs were used before the PTF can be applied.

After the PTF has been applied on a system, you can restart the cluster
jobs that were ended before the PTF was applied. If Cluster Resource
Services was ended, you can use the Start Cluster Node API or CL
command to start Cluster Resource Services for each cluster node. If
you used the Change Cluster Recovery CL command to end just the cluster
administrative domain jobs, they can be restarted on each cluster node
using the Change Cluster Recovery command as follows:

CHGCLURCY CLUSTER(<cluster>) CRG(<admin_domain>) NODE(<node>)
ACTION(*STRCRGJOB)

where <cluster> is the name of your cluster, <admin_domain> is the name
of the cluster administrative domain, and <node> is the cluster node
name for the system. You should call this command once for each cluster
administrative domain in your cluster.

After the PTF has been applied, you should also restart the QPRFSYNCH
job on every node in your cluster.  You can restart the QPRFSYNCH job
with the following commands:

CALL PGM(QSYS/QFPAPRFJ) PARM(END)
CALL PGM(QSYS/QFPAPRFJ) PARM(START)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI46628 :
=================================================

If you are a multiple system user, and intend on installing this PTF on
a system, then saving and restoring product 5770HAS onto other systems,
then you need to run the following command on the other systems after
restoring product 5770HAS:

QSYS/CALL PGM(QHASM/QPZ1HA03)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI48012 :
=================================================

In order for this PTF to be fully activated, you must end and restart
the QHASVR job.  You can do this by ending and starting the cluster
node using the commands:

ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)

Or, you can end the QHASVR job under QSYSWRK subsystem:

ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)

where <job-num> is the job number.

Issue the WRKCLU command to restart the QHASVR job.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI45741 :
=================================================

Step 1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job.  You can do this by ending and starting the cluster
node using the commands:

ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)

Or, you can end the QHASVR job under QSYSWRK subsystem:

ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)

where <job-num> is the job number.

Issue the WRKCLU command to restart the QHASVR job.

Step 2:
You must restart the ADMIN2 instance of the *HTTP server.  Do this
with the following commands:

ENDTCPSVR  SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR  SERVER(*IAS) INSTANCE(ADMIN2)

Step 3:
Users must sign off any active sessions which may be using
PowerHA and sign back on after the PTF has been applied.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI44148 :
=================================================

This PTF is an Add Function PTF which must be permanently applied.
Removal of this PTF after step #4 below is not supported.

You must have the most recent PTF group SF99368.

You must install PRPQ 5799-HAS in order to use the functions
provided in this PTF.

Step #1:
In order for this PTF to be fully activated, you must end and restart
the QHASVR job.  You can do this by ending and starting the cluster
node using the commands:

ENDCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)
STRCLUNOD CLUSTER(<cluster-name>) NODE(<node-id>)

Or, you can end the QHASVR job under QSYSWRK subsystem:

ENDJOB JOB(<job-num>/QHAUSRPRF/QHASVR) OPTION(*IMMED)

where <job-num> is the job number.

Issue the WRKCLU command to restart the QHASVR job.

Step #2:
You must restart the *ADMIN instance of the *HTTP server.  Do this
with the following commands:

ENDTCPSVR  SERVER(*HTTPSVR) INSTANCE(*ADMIN)
STRTCPSVR  SERVER(*HTTPSVR) INSTANCE(*ADMIN)

Step #3:
Users must sign off any active sessions which may be using,
PowerHA and sign back on after the PTF has been applied.

Step #4:
After the PTF has been applied on all of the nodes in the
cluster which have PowerHA installed, you must upgrade
the PowerHA version to 2.1.

If your cluster is currently at PowerHA version 1.0,
you must:

CHGCLUVER  CLUSTER(<cluster-name>) HAVER(*UP1VER)
CLUVER(*SAME)

After your cluster is at PowerHA version 2.0, you must:

CHGCLUVER  CLUSTER(<cluster-name>) HAVER(*UP1MOD)
CLUVER(*SAME)

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI36179 :
=================================================

End Cluster Resource Services on the node using the ENDCLUNOD command,
apply the PTF, signoff/signon, and then restart Cluster Resource
Services using the STRCLUNOD command.

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI47000 :
=================================================

In order for this PTF to be fully activated, you must restart
the ADMIN2 instance of the *HTTP server.  Do this with the
following commands:

ENDTCPSVR  SERVER(*IAS) INSTANCE(ADMIN2)
STRTCPSVR  SERVER(*IAS) INSTANCE(ADMIN2)


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI49544      HASM-INCORROUT COLUMN HEADINGS INCORRECT IN SYSTEMS DIRECTOR
   SI48770      HASM-INCORROUT Cluster Resource Services MRI loading problem
   SI44002      HASM-INCORROUT Cluster Resource Services GUI errors
   SI39387      Delete Cluster fails when one node is not active in the clus
   SI39387      5761HAS-INCORROUT MSGCPF0C4A incorrect release value
   SI36856      OSP-INCORROUT Fixes for Cluster Resource Services GUI
   SI36339      OSP-INCORROUT Fixes for Cluster Resource Services GUI
   SI48919      HASM-INCORROUT Inventory values displayed incorrectly
   SI45301      HASM-F/QPDSERR-T/QPDSRVPG-MSGCPI93B2 5770 F/QSBROUTER MOD/SB
   SI44995      HASM-HASM-UNPRED *DTAARA (DATA AREA) QUSRHASM/QSTARTAPP NOT
   SI43376      HASM-INCORROUT HASM GUI undo fails if HASMIASP failed to cre
   SI43376      HASM-UNPRED SBG GUI FAILS DURING STEPS CLEANUP ENVIRONMENT
   SI39182      HA-INCORROUT Updated InfoCenter for High Availability Soluti
   SI39182      HA-INCORROUT  HASM GUI Resume task not detecting remote subs
   SI36903      OSP-INCORROUT fixes for High Availability Solution Manager G
   SI36903      OSP-INCORROUT deleted profiles may be shown to be eligible f
   SI36500      OSP-INCORROUT  Fixes for High Availability Solution Manager
   SI56012      HASM-HA-WAIT LARGE SVC ENVIRONMENT RESULTS IN INELIGIBLE TAR
   SI56000      INCORROUT - warning messages show up in the welcome page whe
   SI55613      OSP-OTHER-MSGHAE2040 CHGCRGPRI GMIR SVC FAILS MSGHAE2040
   SI55524      INCORROUT - incorrect removing the PowerHA plugin after remo
   SI54299      HASM-INCORROUT INCONSISTENT DEVICE DOMAIN DATA
   SI54299      HASM-HA-MSGCPI096E EVERY TIME THEY IPL THE TARGET FLASH COPY
   SI54299      HASM-HA-F/QHACMN-T/QYASPSSN-MSGCPF22E6/MSGCPF22E7 ENCOUNTERE
   SI53639      HASM-WAIT ENDSVCSSN hangs when SVC volume status is degraded
   SI53639      HASM-HA-LOOP RUNNING ENDSVCSSN RESULTS IN LOOPING CONDITION
   SI53607      HASM-HA MULTIPLE LUNS IN 1 VOLUME GROUP AT POWERHA VERSION 1
   SI53607      HASM-HA-THREADS DISPLAY COPY DESCRIPTION POWERHA VERSION 1.0
   SI53607      HASM-HA CPFAF02 INTERNAL APPLICATION ERROR. DIAGNOSTIC CODE
   SI53414      HASM-HA-INCORROUT CHGCRGPRI GLOBAL MIRROR POWERHA
   SI53284      PowerHA GUI fix for 7.1f
   SI53002      INCORROUT No target flash copy not allowed when source node
   SI52984      HA-INCORROUT RTVASPSSN Value does not match DSPASPSSN value
   SI52967      MSGCPIB711-HLIC-94XXDISK IN MULTIPATH ENVIRONMENT, ENDSVCSSN
   SI52687      New function to support SVC and Storwize Global Mirror with
   SI52687      HASM-HASMS-F/QSYCHGFU-T/QSI506030Y-MSGCPF228A PTF
   SI50603      HASM-F/QYASPSSN-T/QYASPSSN-MSGHAE9898 STRASPSSN FOR TYPE(*FL
   SI50474      F/QYASSVCCMN-MSGHAE2057-MOD/YASSVCVCT CMMVC6209E FLASHCOPY M
   SI50443      HASM-F/QYASPCMN-T/QYASPCMN-MSGHAE2024 MSGHAE2024 DOING ADDAS
   SI50331      HA-INCORROUT Multiple paths missing after CHGCRGPRI
   SI50202      HA-INCORROUT CMUN00022E sent for STRASPSSN
   SI50119      HASM-INCORROUT DSPSVCSSN NOT CORRECT AFTER SI48371 APPLIED A
   SI50119      OSP-MSGSTRASPSSNLOC(*NONE)-PAR-940XMISC CHGASPCPYD ASPCPY(EC
   SI50119      HA-INCORROUT MSGHAE0045 PowerHA GUI during configure mirrori
   SI48496      ENDSVCSSN COMMAND ARE INFO MESSAGES: CPPEA33 AND CPPEA35
   SI48371      HASM-NF: PowerHA Early 2013 New Function
   SI48371      HASM-NF: PowerHA Early 2013 New Function
   SI48371      HASM-NF: PowerHA Early 2013 New Function
   SI48371      HASM-NF: PowerHA Early 2013 New Function
   SI49232      HASM-F/QCAFLD-T/QHAOH-MSGCPD0085 CPD0085 DURING ADDCADMRE OF
   SI48746      HA-INCORROUT ADMIN DOMIN *PRTDEV NO ERROR MESSAGE IN JOB LOG
   SI46617      HA-INCORROUT ADMIN DOMAIN MRE HAS INCORRECT STATUS
   SI42638      OSP-MSGCPF0001 Adding a monitored resource entry to an admin
   SI36365      OSP-INCORROUT Fixes for Cluster Administrative Domain
   SI46628      HA-INCORROUT MSGCPF2204 User profile QHAUSRPRF not found
   SI48259      OSP-OTHER-UNPRED ENDSVCSSN DOESN'T AUTOMATICALLY REMOVE THE
   SI48012      HA-INCORROUT MSGCPF2407 QHASVR job ends
   SI47047      HASM-MSGCPI096B VARY ON OF FLASHCOPY IASP SUSPENDS GEOGRAPHI
   SI47000      HA-INCORROUT POWERHA GUI SHOWS INCORRECT PRODUCTION COPY CAP
   SI45741      PowerHA: April 2012 New Function
   SI45741      HA-INCORROUT CFGGEOMIR fails with secondary ASPs.
   SI45741      HA-INCORROUT STRSVCSSN fails for a *FLASHCOPY session
   SI45917      HA-MSGHAE9898 CHGCRGPRI IN A POWERHA MMIR V7000 FAILS
   SI45356      HA-INCORROUT QYASDEVHCK program fails during STRCRG
   SI45080      HA-UNPRED Support for SVC/V7000 reverse FlashCopy
   SI44148      HA-NF October 2011 PowerHA New Function
   SI44148      New Function: PowerHA GUI
   SI44148      HA-New Function: Provide CFGGEOMIR command
   SI44148      HA-UNPRED SVC / Storwize V7000 Support
   SI44148      HA-New Function: PowerHA N-2 Version Support
   SI44148      HA-INCORROUT Base enablement for IASP functionality
   SI44148      HA-New Function PowerHA GUI
   SI44148      HA-UNPRED SVC / Storwize V7000 Support
   SI44148      HA-UNPRED SVC / Storwize V7000 Support
   SI44148      HA-UNPRED SVC / Storwize V7000 Support
   SI37239      HA-INCORROUT Enable RTVASPCPYD, RTVASPSSN
   SI43597      HA-MSG4429 Unable to display ASP copy description
   SI43434      HA-INCORROUT XSM Unable to vary on ASP after detach
   SI42888      HA-INCORROUT DSPASPSSN Tracking Space Used is incorrect.
   SI42215      HA-INCORROUT Wrong node name displayed for ASP session
   SI42030      HAS-INCORROUT XSM Flashcopy target not identified
   SI41918      HA-INCORROUT Base Function to Enable Future Extensions
   SI41610      HASM-INCORROUT ENHANCEMENT TO PREVENT LOCK CONDITION.
   SI41277      HA-INCORROUT Fields missing in QYASRTVINF
   SI40497      HA-INCORROUT Base Function to Enable Future Extensions
   SI40180      HA-INCORROUT CHGASPSSN *CHGATTR fails for flash copy
   SI39912      HA-INCORROUT Recovery from LUN level switch fails
   SI39674      HA-MSGCPFBBD3 Error invoking CRG exit programs
   SI39549      HA-INCORROUT Must select async mode when async delivery spec
   SI39236      HA-INCORROUT CHGCRGPRI fails for global mirror
   SI39181      HA-INCORROUT Sync progress not correct for DSPASPSSN
   SI38975      HA-MSGHAE2013 STRASPSSN fails
   SI38609      HA-INCORROUT Flash copy role is not correct
   SI38325      HA-INCORROUT QYASPJNEXT fails on remove node
   SI38321      HA-INCORROUT CHGCRGPRI fails with an active CRG
   SI38147      HA-MSGHAE0045 message text not correct
   SI37995      HA-INCORROUT CHGCRGPRI results in QYASSTESWE failure
   SI37995      HA-MSGCPF9D8D Stream file failed to open
   SI37995      HA-INCORROUT CHGCRGPRI fails
   SI37604      HA-INCORROUT Correct PowerHA replication error checking
   SI36607      HA-INCORROUT Unable to change ASP copy description
   SI36607      HA-INCORROUT QYASPJNEXT fails removing a node from a CRG rec
   SI36607      HA-INCORROUT DSPASPCPYD Fails
   SI36607      HA-MSGCPDBB0E Exit program compare fails
   SI36607      HA-MSGHAE2009 Unable to create a flash copy session
   SI36607      HA-INCORROUT Support for space efficient flash copy
   SI36607      HA-INCORROUT Remove consistency parameters from CHGASPSSN
   SI36416      HA-MSGCPFAF02 Unable to run DSCLI command
   SI39031      HA-RCDSSPN3-MSGCPFAF02 unable to run dscli operations using
   SI36972      HA-INCORROUT CRG site does not become active
   SI36179      correction for problems found during final regression test

Summary Information

System..............................i
Models..............................
Release.............................V7R1M0
Licensed Program...............5770HAS
APAR Fixed..........................View details for APAR SE61958
Superseded by:......................View fix details for PTF SI68260
Recompile...........................N
Library.............................QHASM
MRI Feature ........................NONE
Cum Level...........................C5317710


System i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG15V","label":"PTF Cover Letters - OS\/400 General"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R1M0","Edition":"","Line of Business":{"code":"","label":""}},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG16D","label":"PTF Cover Letters - IBM i 7.1 environment"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R1M0","Edition":"","Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
14 July 2015