IBM Support

SI52670 - BRM-MAINT-INCORROUT Fixes

PTF Cover Letter


PTF ( Program Temporary Fixes ) Cover letter


Order this fix

Abstract

BRM-MAINT-INCORROUT Fixes


Pre/Co-Requisite PTF / Fix List

REQ  LICENSED      PTF/FIX  LEVEL

TYPE PROGRAM  REL  NUMBER   MIN/MAX  OPTION
---- -------- ---  -------  -------  ------
PRE  5770SS1  710  SI47250   00/00    0000
DIST 5770BR1  710  SE52441   NONE     0000 (SEE MRI PTF/FIX LIST BELOW)

MRI PTF/FIX LIST
----------------
APAR SE52441 AFFECTS THESE LANGUAGES.  IF YOU HAVE ANY OF THESE
LANGUAGES INSTALLED, INSTALL THE DISTRIBUTION REQUISITE MRI PTF THAT
CORRESPONDS TO THE LANGUAGE(S) INSTALLED ON YOUR SYSTEM.
-----------------------------------------------------------------
:  FEATURE                                   LICENSED  PTF/FIX  :
:  CODE     LANGUAGE                         PROGRAM   NUMBER   :
:  -------  -------------------------------  --------  -------  :
:  2924     ENGLISH UPPER/LOWER CASE SBCS    5770BR1   SI47215  :
:  2902     ESTONIAN                         5770BR1   SI47496  :
:  2903     LITHUANIAN                       5770BR1   SI47497  :
:  2904     LATVIAN                          5770BR1   SI47498  :
:  2905     VIETNAMESE                       5770BR1   SI47499  :
:  2906     LAO                              5770BR1   SI47500  :
:  2909     BELGIAN ENGLISH                  5770BR1   SI47501  :
:  2911     SLOVENIAN                        5770BR1   SI47502  :
:  2912     CROATIAN                         5770BR1   SI47218  :
:  2913     MACEDONIAN                       5770BR1   SI47503  :
:  2914     SERBIAN                          5770BR1   SI47504  :
:  2922     PORTUGUESE                       5770BR1   SI47219  :
:  2923     DUTCH                            5770BR1   SI47220  :
:  2925     FINNISH                          5770BR1   SI47505  :
:  2926     DANISH                           5770BR1   SI47506  :
:  2928     FRENCH                           5770BR1   SI47221  :
:  2929     GERMAN                           5770BR1   SI47222  :
:  2930     JAPAN LOWER CASE                 5770BR1   SI47223  :
:  2931     SPANISH                          5770BR1   SI47224  :
:  2932     ITALIAN                          5770BR1   SI47507  :
:  2933     NORWEGIAN - BOKMAL               5770BR1   SI47509  :
:  2937     SWEDISH                          5770BR1   SI47510  :
:  2938     ENGLISH UPPER CASE DBCS          5770BR1   SI47225  :
:  2939     SWISS GERMAN                     5770BR1   SI47226  :
:  2940     SWISS FRENCH                     5770BR1   SI47227  :
:  2942     SWISS ITALIAN                    5770BR1   SI47513  :
:  2954     ARABIC                           5770BR1   SI47228  :
:  2956     TURKISH                          5770BR1   SI47514  :
:  2957     GREEK                            5770BR1   SI47515  :
:  2958     ICELANDIC                        5770BR1   SI47516  :
:  2961     HEBREW                           5770BR1   SI47517  :
:  2962     JAPANESE                         5770BR1   SI47229  :
:  2963     BELGIUM DUTCH                    5770BR1   SI47230  :
:  2966     BELGIUM FRENCH                   5770BR1   SI47231  :
:  2972     THAI                             5770BR1   SI47518  :
:  2974     BULGARIAN                        5770BR1   SI47519  :
:  2975     CZECH                            5770BR1   SI47232  :
:  2976     HUNGARIAN                        5770BR1   SI47233  :
:  2978     POLISH LANGUAGE                  5770BR1   SI47234  :
:  2979     RUSSIAN                          5770BR1   SI47235  :
:  2980     BRAZILIAN PORTUGUESE             5770BR1   SI47520  :
:  2981     CANADIAN FRENCH                  5770BR1   SI47236  :
:  2984     ENGLISH UPPER/LOWER CASE DBCS    5770BR1   SI47237  :
:  2986     KOREAN                           5770BR1   SI47238  :
:  2987     TRADITIONAL CHINESE              5770BR1   SI47521  :
:  2989     SIMPLIFIED CHINESE               5770BR1   SI47522  :
:  2992     ROMANIAN                         5770BR1   SI47239  :
:  2994     SLOVAKIAN                        5770BR1   SI47523  :
:  2995     ALBANIAN                         5770BR1   SI47524  :
:  2996     PORTUGUESE MNCS                  5770BR1   SI47240  :
:  2998     FARSI                            5770BR1   SI47539  :
-----------------------------------------------------------------




NOTICE:
-------
Application of this PTF may disable or render ineffective programs that
use system memory addresses not generated by the IBM translator,
including programs that circumvent control technology designed to limit
interactive capacity to purchased levels.  This PTF may be a prerequisite
for future PTFs.  By applying this PTF you authorize and agree to the
foregoing.

This PTF is subject to the terms of the license agreement which
accompanied, or was contained in, the Program for which you are obtaining
the PTF.  You are not authorized to install or use the PTF except as part
of a Program for which you have a valid Proof of Entitlement.

SUBJECT TO ANY WARRANTIES WHICH CAN NOT BE EXCLUDED OR EXCEPT AS EXPLICITLY
AGREED TO IN THE APPLICABLE LICENSE AGREEMENT OR AN APPLICABLE SUPPORT
AGREEMENT, IBM MAKES NO WARRANTIES OR CONDITIONS EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON INFRINGEMENT,
REGARDING THE PTF.

The applicable license agreement may have been provided to you in printed
form and/or may be viewed using the Work with Software Agreements (WRKSFWAGR)
CL command.


APAR Error Description / Circumvention

-------------------------------------------------
Fixes in this PTF:
1. N/A.
2. In V6R1 and above, when using BRMS GUI client to restore
integrated file system (IFS) objects, there is no completion
information in the BRMS log or job log.
3. In V6R1 and above, running the Initialize BRMS (INZBRM)
command, with *RUNPRDINZ specified for the Option (OPTION)
parameter, in two different jobs at the same time may cause one
of the commands to fail with MSGBRM40A5.
4. In V6R1 and above, if the BRMS GUI client is used to Manage
Device Connections, running the Move Media using BRM (MOVMEDBRM)
command may cause the location of media to be incorrect on some
systems in the BRMS network.
5. In V6R1 and above, BRMS has been enhanced to re-mount file
systems after a control group has finished doing backups if the
Start Backup using BRM (STRBKUBRM) command is run using a
control group that has *YES specified for Unmount user-defined
file systems.
6. In V6R1 and above, if the Start Backup using BRM (STRBKUBRM)
command is run with *CTLSBS specified for the Submit to batch
(SBMJOB) parameter, the backup may fail with MSGCPD0085 and
MSGCPF0001 when it attempts to add job queue entry Q1ACTLSBS to
the job queue for the controlling subsystem.
7. In 7.2, when using the BRMS GUI client, clicking Enterprise
Services may cause a ClassNotFoundException error.
8. In 7.2, when using the BRMS GUI client to move a volume, the
user is not allowed to retry the operation by entering new
values.
9. In 7.2, when using the BRMS GUI client to move a volume, if
Home location is selected for the Storage location field, the
operation will fail.
10. In 7.2, when using the BRMS GUI client to connect to a
Target system that is at a release prior to 7.2, automatic
refresh is not supported but the Auto refresh frequency field is
displayed on the Enterprise Hub Center panel.
11. In 7.2, performance of the installation of 5770BR1 LPP has
been improved.
12. In 7.2, when using the BRMS GUI client to Change Omits for a
control group entry, a value can not be entered for the
Attribute field.
13. In 7.2, when using the backup and archive control group
wizards in the BRMS GUI client, resolved values are not
displayed for fields that refer to the Backup, Archive and/or
System Policy.
14. In 7.2, when using the BRMS GUI client to display the
archive control group properties, the Archive criteria tab does
not display the correct value for the Disk Pool Threshold field.
15. In 7.2, after upgrading BRMS, control groups will have the
Asynchronous bring field incorrectly set to *NO instead of
*BKUPCY.
16. In 7.2, the Initialize BRMS (INZBRM) command incorrectly
starts BRMS subsytems when the system is in restricted state.
17. In V6R1 and above, when the Monitor Save While Active
(MONSWABRM) command is used to monitor other BRMS save commands,
the other commands may not use the correct value for the Save
active message queue (SAVACTMSGQ) parameter.
18. In V6R1 and above, performance of the Add List Entry
(Q1AADDLSTE) API has been improved when it is used to append
entries to a BRMS link list.
19. In V6R1 and above, when a restore uses the From system
(FROMSYS) parameter, the restore may incorrectly try to use
alternate volumes which causes the restore to fail with various
messages, including MSGBRM4126 and MSGBRM4123.
20. In V6R1 and above, when the Work with Link Information
(WRKLNKBRM) or Work with Media Information (WRKMEDIBRM) command
is used to work with saved integrated file system (IFS) objects,
the complete list of objects may not be displayed and message
MSGCPDA093 may be in the job log.
21. In V6R1 and above, the BRMS GUI client may not use Secure
Sockets Layer (SSL) for BRMS communications.
22. In V6R1 and above, when the Start Maintenance for BRM
(STRMNTBRM) command is run after a BRMS backup, automatic
duplication may fail with message MSGBRM1944.
23. In V6R1 and above, when running the Start Backup using BRM
(STRBKUBRM) command for a control group that has the Save Domino
Server using BRMS (SAVDOMBRM) command in an *EXIT entry, if
inquiry message MSGBRM148A is sent to the job and the user
responds with 'C' to Cancel, the STRBKUBRM will continue to the
next backup instead of ending.
24. In V6R1 and above, when running the Start Backup using BRM
(STRBKUBRM) command for a control group that has an *ALLUSR
entry with Sync ID specified, the STRBKUBRM may fail with
message MSGCPF37BE.
25. In V6R1 and above, the BRMS network synchronization job,
QBRMSYNC, may go into message wait (MSGW) state while waiting
for a response to inquiry message MSGCPF4528.
26. In V6R1 and above, when the Duplicate Media using BRM
(DUPMEDBRM) command duplicates multiple volumes using a tape
library, it may not release the tape drive resources until the
DUPMEDBRM command finishes. This may cause MSGBRM1033 in other
jobs trying to use the same tape library during the duplication.
27. In V6R1 and above, when a volume contains a QFILE saved
item, the volume is expired and a save uses the volume before
the Start Maintenance for BRM (STRMNTBRM) command is run, the
QFILE saved item may not be removed from BRMS save history.
28. In V6R1 and above, the default size for BRMS flight
recorders is incorrectly set to 500MB when it should 50MB.
29. N/A.
30. In 7.1 and above, when an Enterprise hub is not in a BRMS
network, scheduled reports do not run.
31. In V6R1 and above, saved items created using a save file
media policy that has *YES specified for the Encrypt Data field,
incorrectly indicates the saved data is encrypted. Specifying
*YES for the Encrypt Data field should only cause data written
to tape by a subsequent call to the Save Save Files using BRM
(SAVSAVFBRM) command to be encrypt the saved data.
Additionally, data that cannot be saved using software
encryption, such as saves for *SAVSYS, *IBM, *SAVSECDTA, *SAVCFG
or Q* control group entries, incorrectly allow values to be
specified for the Encrypt Data field.
32. In V6R1 and above, when * is specified for the Output
(OUTPUT) parameter on the Display Log for BRM (DSPLOGBRM)
command, message MSGCPF9999 is not displayed correctly.
Additionally, when *PRINT is specified for the OUTPUT parameter
on the DSPLOGBRM command, the output will not include message
MSGCPF9999.
33. In V6R1 and above, the BRMS GUI client may not display
message details when viewing the results of a BRMS operation.
34. In V6R1 and above, BRMS operations may fail with message
MSGCPA4060, MSGCPF4284, MSGCPF4290 or MSGCPF6772 when a volume
is being selected.
35. In 7.2, recovery reports (QP1ARCY) created using the Start
Recovery using BRM (STRRCYBRM) or Start Maintenance for BRM
(STRMNTBRM) command have been enhanced to list libraries from
independent auxiliary storage pools (IASP) that have not been
saved using BRMS.
Note: The list of libraries from IASPs that have not been saved
can be removed from the recovery report by running the following
command:
CRTDTAARA DTAARA(QUSRBRM/Q1AMISLIBS) TYPE(*CHAR)
36. In 7.1 and above, the BRMS GUI client fails with message
MSGCPF3C81 when restoring integrated file system (IFS) objects
from Tivoli Storage Manager (TSM) saves.
37. In V6R1 and above, when a Saved Item that did not have
object omits is displayed using the Work with Media Information
(WRKMEDIBRM) command, a * may be displayed next to the Number of
objects not saved field to indicate object omits were used
during the save.
38. In V6R1 and above, when using the Restore Object using BRM
(RSTBRM) command with *LIST specified for the Objects (OBJ)
parameter and *DAOS specified for the List (LIST) parameter, the
restore may fail with messages MSGCPD0013 and MSGCPF0001.
39. In V6R1 and above, the performance of Restore Object using
BRM (RSTBRM) command has been improved when *LIST is specified
for the Objects (OBJ) parameter and *DAOS is specified for the
List (LIST) parameter.
40. In V6R1 and above, when running Duplicate Media using BRM
(DUPMEDBRM) with EXPDATE(*FROMVOL), the expiration date is
incorrectly set to *PERM.

CORRECTION FOR APAR 'SE58456' :
-------------------------------
Load and apply this PTF.
After the BRMS PTF is installed, do the following to enable the


BRMS
plug-in for the IBM Systems Director Navigator for i5/OS (web

brower)
or System i Navigator windows client.

Enable the BRMS plug-in for the IBM Systems Director Navigator

for i5/OS.
==== V6R1 and newer only:
Note:  ending the http admin servers may affect other non-BRMS

users.
From System i:
1. Enter the command to end the http admin servers:
ENDTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)
2. Wait for the http admin server jobs to end or terminate
them.
Use command:  WRKACTJOB SBS(QHTTPSVR)
3. Restart the http admin servers:
STRTCPSVR SERVER(*HTTP) HTTPSVR(*ADMIN)


----------------------------------------------------------------

------------------------------------

Enable the BRMS plug-in for System i Navigator Windows/OS
client.
==== Pre-V6R1:
1) Close the System i Navigator application.
2) On the client/PC, uninstall the BRMS plug-in using the
Client

Access Express "Selective Setup" utility:  from the
Windows
"Start", select
"Programs->IBM iSeries Access for Windows->Selective
Setup".

Follow the instructions on the dialogs to uninstall the
BRMS

plug-in.  Notes:
a) On the second dialog, select the radio button "Ignore.
I'm
only going to UN-install components".
b) On the next screen, "Component Selection", open the
System i Navigator folder; a list of all installed
System i Navigator components and plug-ins is displayed.

c) Deselect the BRMS plug-in to uninstall it (if you do
not
see the BRMS plug-in, it was not properly installed);
reboot the PC if requested.
3) Start System i Navigator.
4) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main iSeries
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system

to install from, select the iSeries that has the new BRMS

PTF installed.

=== V6R1 and newer:
1) Close the System i Navigator application.
2) Open a Windows Command Prompt screen.
3) Enter the following command:
cwbinplg /REMOVE=IBM.BRMSPlugin
4) On the client/PC, start the iSeries Navigator.
5) Use the System i Navigator "Install Options->Install
Plug-in"
action. This action is available from the main System i
Navigator "File" menu and the "My Connections" folder
context/pop-up menu.  When prompted for the iSeries system

to install from, select the iSeries that has the new BRMS

PTF installed.

CIRCUMVENTION FOR APAR 'SE58456' :
----------------------------------
None.


Activation Instructions


None.




Special Instructions


********************************************************************
THE FOLLOWING ARE SUPERSEDED SPECIAL INSTRUCTIONS. IF THE SUPERSEDED
PTF HAS ALREADY BEEN APPLIED AND ITS SPECIAL INSTRUCTION FOLLOWED,
IT IS NOT NECESSARY TO FOLLOW THAT SPECIAL INSTRUCTION AGAIN.
********************************************************************

SPECIAL INSTRUCTIONS FOR SUPERSEDED PTF SI50292:
================================================

All BRMS activity must be stopped while this ptf is being applied and
users must signoff and on again before using BRMS after the ptf is
applied.


Default Instructions

THIS PTF CAN BE APPLIED IMMEDIATE OR DELAYED.



Supersedes

PTF/FIX NO(S).  APAR TITLE LINE
--------------  ------------------------------------------------------------
   SI51667      BRM-MAINT-INCORROUT  Fixes
   SI51029      BRM-MAINT-INCORROUT  Fixes
   SI50292      BRM-MAINT-INCORROUT  Fixes
   SI50292      BRM-MAINT-INCORROUT  Fixes
   SI50292      BRM-MAINT-INCORROUT  Fixes
   SI49719      BRM-MAINT-INCORROUT  Fixes
   SI48969      BRM-MAINT-INCORROUT  Fixes
   SI47935      BRM-MAINT-INCORROUT  Fixes
   SI47039      BRM-MAINT-INCORROUT  Fixes
   SI46340      BRM-MAINT-INCORROUT  Fixes
   SI45327      BRM-MAINT-INCORROUT  Fixes
   SI44710      BRM-MAINT-INCORROUT  Fixes
   SI43868      BRM-MAINT-INCORROUT  Fixes
   SI42925      BRM-MAINT-INCORROUT  Fixes
   SI42066      BRM-MAINT-INCORROUT  Fixes
   SI42449      BRM-BACKUP-INCORROUT OWNERSHIP OF MEDIA IS CHANGED AFTER BAC
   SI41206      BRM-MAINT-INCORROUT  Fixes
   SI40005      BRM-MAINT-INCORROUT  Fixes
   SI40005      BRM-MAINT-INCORROUT  Fixes
   SI38740      BRM-MAINT-INCORROUT  Fixes
   SI38740      BRM-MAINT-INCORROUT  Fixes
   SI37987      BRM-MAINT-INCORROUT  Fixes
   SI37264      BRM-MAINT-INCORROUT  Fixes
   SI37264      BRM-MAINT-INCORROUT LARGE AMOUNT OF RECORDS PUT INTO QA1ANET
   SI35676      BRM-BACKUP-MSGBRM400F WHEN RUNNING A CONTROL GROUP WITH A *S
   SI35676      BRM-MAINT-INCORROUT  Fixes
   SI35676      BRM-MAINT-INCORROUT  Fixes
   SI35676      BRM-MAINT-INCORROUT  Fixes
   SI35676      BRM-MAINT-INCORROUT  Client Fixes

Summary Information

System..............................i
Models..............................
Release.............................V7R1M0
Licensed Program...............5770BR1
APAR Fixed..........................View details for APAR SE58456
Superseded by:......................View fix details for PTF SI71641
Recompile...........................N
Library.............................QBRM
MRI Feature ........................NONE
Cum Level...........................C4283710


IBM i Support

IBM disclaims all warranties, whether express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. By furnishing this document, IBM grants no licenses to any related patents or copyrights. Copyright © 1996,1997,1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 IBM Corporation. Any trademarks and product or brand names referenced in this document are the property of their respective owners. Consult the Terms of use link for trademark information.

[{"Type":"MASTER","Line of Business":{"code":"LOB08","label":"Cognitive Systems"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SWG60","label":"IBM i"},"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.1.0"},{"Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"SG15V","label":"PTF Cover Letters - OS\/400 General"},"Component":"","ARM Category":[],"Platform":[{"code":"PF012","label":"IBM i"}],"Version":"V7R1M0","Edition":"","Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
08 May 2014