Troubleshooting
Problem
IBM System x3550 (Type 1013, 1913, 7978) - Power Back Plane installation movie
Resolving The Problem
To install the Power Back Plane:
- Position the assembly in the base using the posts in the base and the keyholes in the card as a guide.r.
- Slide it towards the system board to seat the connector.
- Connect the Hard Disk Drive Back Plane Cable to the Power back plane.
Install the Hot-Swap Power Supplies:
- Position the power supply into the bay and slide it into place until it is secured by the latch.
Install the Top Cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward and secure with the single captive screw.
- Rotate the Fan Door to the closed and latched position.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02DKY","label":"System x->System x3550->1913"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU02QYU","label":"System x->System x3550->1013"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QUOEF4I","label":"System x->System x3550->7978"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074607