Product Documentation
Abstract
Removing the DVD cable movie - IBM System x3250 M4 (type 2583)
Content
Text from the audio portion of the DVD cable removal movie
Removing the DVD cable
- Remove the top cover:
- Turn off the server and peripheral devices, and disconnect all power cords and external cables.
- Press the cover-release button.
- Slide the cover back approximately one half inch.
- Lift the cover off of the server, and set it aside.
- Remove the DVD drive:
- Press the release tab on the rear of the drive-retention clip toward the right side of the server to release the clip. Then, while you press the tab, push the drive out of the bay, and set it aside.
- Press the cable connector latch and slide the DVD cable to the unlock position. Then, disengage the cable from the optical drive cage connector and set it aside.
For specific instructions for the removal and installation of hardware, see:
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW341","label":"System x->System x3250 M4"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5092631