Product Documentation
Abstract
8202-E4B (Power 720) and 8205-E6B (Power 740) - memory dimm removal movie
Content
Memory modules removal
To remove the Memory modules, follow these steps:
- Place the system into the service position.
- Remove the service access cover.
- Disconnect the power source from the system by unplugging the system.
- Remove the memory riser from the system by pulling the locking tabs into the open position and lifting the memory riser out of the system.
- Identify the failing memory module by pushing the blue button on the memory riser. This activates the LED associated with the failing DIMM.
- Unlock the memory module by pushing the locking tabs open. Lift the memory module out of the connector. The lever action of the tabs forces the memory module out of the connector.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HW1P1","label":"Power->Power 720"},"Platform":[{"label":"Platform Independent","code":"PF025"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HW1S1","label":"Power->Power 740"},"Platform":[{"label":"Platform Independent","code":"PF025"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5087135