Product Documentation
Abstract
8202-E4B (Power 720) and 8205-E6B (Power 740) - processor vrm installation movie
Content
Voltage regulator module (VRM) installation
To install the VRM, follow these steps:
- Remove the voltage regulator module from its antistatic package.
-
Install the voltage regulator module by completing the following steps:
- Ensure that the connector tabs are pushed out to the unlocked position before you install a new voltage regulator module.
- Carefully grasp the voltage regulator module along two edges and align it with the connector.
- Insert the voltage regulator module into the connector.
- Secure the voltage regulator module by pushing in the latches
- Replace the service access cover.
- If you are working on a rack-mounted system unit, ensure that the system cables are routed through the cable-management arm correctly.
- Reconnect all power and signal cables to their respective connectors.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HW1P1","label":"Power->Power 720"},"Platform":[{"label":"Platform Independent","code":"PF025"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HW1S1","label":"Power->Power 740"},"Platform":[{"label":"Platform Independent","code":"PF025"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5086918