Operator information panel assembly installation movie - IBM System x3850 X5 (7145, 7146), System x3950 X5 (7145)

Content

• Movie player help

Text from the audio portion of the operator information panel assembly installation movie

To install the Operator Information Panel Assembly:

1. Insert the Operator Information Panel into the server until latched in place.
   
   
2. Connect the cable to the Operator Information Panel.
   
   
3. Install the Memory Cards or Filler Panels in slots 6, 7, and 8
   
4. Insert the memory card into the server using the guides for alignment.
   
   
5. Rotate the retention levers to the closed position and slide the blue release latch toward the front of the server until latched.
   
   
6. Insert the filler panels using the guides for alignment.
   
   
7. Install the Front Bezel:
   
   
   1. Position the bezel on the server using the pins on the bezel and the holes in the chassis for alignment and then press the bezel in until secured by the latches.
      
      Here is a closer look at one of the three alignment pins on the bezel and a hole in the chassis.
      
      
8. Install the Top Cover:
   
   
   1. With the cover release latch in the open position place the cover on top of the server so that the tabs on the cover align with the slots in the chassis.
      
      
   2. Slide the top cover forward while closing the release latch.
      
      

• View the operator information panel assembly removal movie
• Return to matrix

For specific instructions for the removal and installation of hardware.

• Problem Determination and Service Guide - IBM System x3850 X5, x3950 X5 (7145, 7146)