Product Documentation
Abstract
IBM System x3850 X5, System x3950 X5 - Adapter Installation Movie
Content
Text from the audio portion of the adapter installation movie
To Install an Adapter:
- Align the adapter with the connector on the I/O board and press down until seated. Secure the card in place by rotating the black retaining plate and blue retention latch, down insuring that the pin on the plate seats in alignment hole in the chassis.
Here is a closer look at the pin on the retaining plate and the hole in the chassis.
-
Install the Top Cover:
- With the cover release latch in the open position place the cover on top of the server so that the tabs on the cover align with the slots in the chassis. Slide the top cover forward while closing the release latch.
- With the cover release latch in the open position place the cover on top of the server so that the tabs on the cover align with the slots in the chassis. Slide the top cover forward while closing the release latch.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SRF","label":"System x->System x3850 X5->7146"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SRO","label":"System x->System x3850 X5->7145"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SZB","label":"System x->System x3950 X5->7145"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5086314