IBM Support

Front hot-swap fan installation movie - IBM System x3850 X5 (7145, 7146), System x3950 X5 (7145)

Product Documentation


Abstract

IBM System x3850 X5, System x3950 X5 - Front Hot-swap Fan Installation Movie

Content

Text from the audio portion of the front hot-swap fan installation movie

 

To install a front hot-swap fan:

  1. With the fan release handle in the open position slide the fan into the server, using the slots in the fan and the pins on the chassis for alignment.

  2. Rotate the handle up until it latches in place.

    Here is a closer look at an alignment pin on the chassis and the cam action of the release handle.

  3. Install the Front Bezel:

    1. Position the bezel on the server using the pins on the bezel and the holes in the chassis for alignment and then press the bezel in until secured by the latches.

    2. Here is a closer look at one of the three alignment pins on the bezel and a hole in the chassis.

For specific instructions for the removal and installation of hardware.

Document Location

Worldwide

Operating System

System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SRF","label":"System x->System x3850 X5->7146"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SRO","label":"System x->System x3850 X5->7145"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SZB","label":"System x->System x3950 X5->7145"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-5086285

Page Feedback