IBM Support

Hot-swap fan installation movie - IBM System x3650 M2 (7947), x3650 M3 (7376, 7945)

Product Documentation


Abstract

IBM System x3650 M2, x3650 M3 - Hot-swap fan installation movie

Content

Text from the audio portion of the hot-swap fan installation movie

To install a Hot-swap Fan:

Note that the air baffles have been removed to provide a better view.

  1. Place the fan into the fan assembly bracket using the connector and the vertical tabs on the fan for alignment, then press down on the fan until it is seated.
  2. Use the same procedure to install any additional fans if required
    Here is a closer look at the rails on the fan and the channels on the fan cage bracket.
  3. Install the Top Cover:
    1. With the cover release latch in the open position place the cover over the chassis so that the tabs in the cover align with the slots in the chassis.
    2. Slide the cover forward while rotating the cover release latch down to the closed position.
      Here is a closer look at a tab on the cover and a slot in the side of the chassis.

For specific instructions for the removal and installation of hardware.

 

Document Location

Worldwide

Operating System

System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WCX","label":"System x->System x3650 M2->7947"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SLL","label":"System x->System x3650 M3->7945"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-5085958

Page Feedback