Product Documentation
Abstract
IBM System x3650 M2, x3650 M3 - USB Hypervisor memory key installation movie
Content
Text from the audio portion of the USB Hypervisor memory key installation movie
To install a USB Hypervisor Memory Key:
- Insert the memory key into the connector, and then slide the collar forward to secure the memory key in place.
-
Install the Top Cover:
- With the cover release latch in the open position place the cover over the chassis so that the tabs in the cover align with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch down to the closed position.
Here is a closer look at a tab on the cover and a slot in the side of the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WCX","label":"System x->System x3650 M2->7947"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SLL","label":"System x->System x3650 M3->7945"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5085947