IBM Support

USB Hypervisor memory key removal movie - IBM System x3650 M2 (7947), x3650 M3 (7376, 7945)

Product Documentation


Abstract

IBM System x3650 M2, x3650 M3 - USB Hypervisor memory key removal movie

Content

Text from the audio portion of the USB Hypervisor memory key removal movie

To remove a USB Hypervisor Memory Key:

  1. Turn off the server and peripheral devices, and disconnect all power cords and external cables.
  2. Remove the Top Cover:
    1. Push in on the button to release the top cover latch and then rotate it up. The cover will move approximately one-half inch to the rear.
    2. Lift the cover off and set it aside.
  3. Remove the USB Hypervisor Memory Key:
    1. Slide the blue locking collar on the connector toward the riser card to unlock it and then pull the key out of the connector.

For specific instructions for the removal and installation of hardware.

Document Location

Worldwide

Operating System

System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WCX","label":"System x->System x3650 M2->7947"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SLL","label":"System x->System x3650 M3->7945"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-5085946

Page Feedback