IBM Support

DIMM installation movie - IBM System x3650 M2 (7947), x3650 M3 (7376, 7945)

Product Documentation


Abstract

IBM System x3650 M2, x3650 M3 - DIMM installation movie

Content

Text from the audio portion of the DIMM installation movie

To install a DIMM:

  1. Ensure that the retention latches are in the open position.
  2. Insert the DIMM straight into the slot, pressing down on both corners at the same time until secured by the latches.
  3. Use the same procedure to install any additional DIMMs if required.
  4. Install the DIMM Air Baffle:
    1. Using the DIMMs and the back of the fans for alignment lower the baffle into place.
  5. Install the Top Cover:
    1. With the cover release latch in the open position place the cover over the chassis so that the tabs in the cover align with the slots in the chassis.
    2. Slide the cover forward while rotating the cover release latch down to the closed position.
      Here is a closer look at a tab on the cover and a slot in the side of the chassis.

For specific instructions for the removal and installation of hardware.

 

Document Location

Worldwide

Operating System

System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WCX","label":"System x->System x3650 M2->7947"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SLL","label":"System x->System x3650 M3->7945"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-5085943

Page Feedback