Microprocessor 2 air baffle installation movie - IBM System x3650 M2 (7947), x3650 M3 (7376, 7945)

Content

• Movie player help

Text from the audio portion of the microprocessor 2 air baffle installation movie

To install the microprocessor 2 air baffle:

1. Using the tab on the side and the pin on the bottom of the baffle for alignment lower it into place in the server.
   Here is a closer look at the tab on the side of the baffle.
   Here is a closer look at the alignment pin on the bottom of the baffle.
   
   
2. Install the PCI Riser Card Assembly 2:
   1. Carefully align the connector and tabs on the riser card with the socket on the system board and the slots on the chassis then press down on the assembly until fully seated.
      Here is a closer look at the tabs on the riser card and the slots in the chassis.
      
      
3. Install the Top Cover:
   1. With the cover release latch in the open position place the cover over the chassis so that the tabs in the cover align with the slots in the chassis.
   2. Slide the cover forward while rotating the cover release latch down to the closed position.
      Here is a closer look at a tab on the cover and a slot in the side of the chassis.

• View the microprocessor 2 air baffle removal movie
• Return to matrix

For specific instructions for the removal and installation of hardware.

• Problem Determination and Service Guide - IBM System x3650 M2