Product Documentation
Abstract
IBM System x3400 M2, x3500 M2 - Hot-Swap Fan installation movie
Content
Text from the audio portion of the Hot-Swap Fan installation movie
To install a Hot-Swap Fan:
- With the locking handle in the open position slide the fan into the server then rotate the handle to the closed position.
- Use the same procedure to install any additional fans if required.
-
Install the side Cover:
- Position the channel on the cover over the rail on the bottom edge of the chassis.
- Rotate the cover toward the chassis and then press down on the cover release latch and close the cover.
- Lock the side cover if required.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03XIC","label":"System x->System x3400 M2->7836"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU03XIF","label":"System x->System x3400 M2->7837"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03XIH","label":"System x->System x3500 M2->7839"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5085847