Product Documentation
Abstract
IBM System x3400 M2, x3500 M2 - Hot-Swap Hard Disk Drive installation movie
Content
Text from the audio portion of the Hot-Swap Hard Disk Drive installation movie
To install a Hot-Swap Hard Disk Drive:
- Ensure that the drive tray handle is in the open position.
- Align the drive tray assembly with the guide rails in the bay.
- Carefully push the assembly into the bay until it is seated, then rotate the drive tray handle to the closed position.
- To install a filler panel, position the panel into the bay and press in until seated.
- Use the same procedure to install any additional drives or filler panels if required.
-
Close the Bezel:
- Rotate the left side of the bezel towards the server until closed.
- Lock the side cover if required.
For specific instructions for the removal and installation of hardware.
- Problem Determination and Service Guide - IBM System x3400 M2
- Problem Determination and Service Guide - IBM System x3500 M2
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03XIC","label":"System x->System x3400 M2->7836"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU03XIF","label":"System x->System x3400 M2->7837"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03XIH","label":"System x->System x3500 M2->7839"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5085845