DVD Drive removal movie - IBM System x3400 M2, x3500 M2

Content

• Movie player help

Text from the audio portion of the DVD Drive removal movie

To remove a DVD Drive:

1. Remove the Side Cover:
   1. Turn off the server and peripheral devices, and disconnect all power cords and external cables.
   2. Unlock the side cover if required
   3. Press the cover-release latch down while rotating the top edge of the cover away from the server and then lift the cover off the server and set it aside.
2. Open the Bezel:
   1. Position your finger on the depressed area on the left side of the bezel and rotate the bezel away from the server.
3. Remove the DVD Drive:
   1. Disconnect the signal and power cables from the drive.
   2. Squeeze the blue tabs on each side of the drive and pull the drive from the bay.
   3. Release the spring retainer and lift the rails from the drive.
   4. Use the same procedure to remove the other retainer

• Problem Determination and Service Guide - IBM System x3400 M2
• Problem Determination and Service Guide - IBM System x3500 M2