Cache battery pack installation - 8233-E8B (Power 750), 8236-E8C (Power 755)

Content

• Movie player help

Cache battery pack installation

To install the cache battery pack, follow these steps:

1. Install the cache battery pack.
   1. Slide the cache battery pack into the mounting guides on the controller until it is seated in the battery connector.
2. After the battery is seated in the connector, move the lever to the latched position to fully seat the battery into the connector.
3. Replace the service access cover.
   1. Place the service access cover on the top of the system unit, approximately 25 mm (1 in.) from the front of the system unit.
   2. Hold the service access cover against the system unit, and slide it toward the front of the system.
   3. Tighten the screws located at the back of the cover.
4. Place the system in the operating position.
   1. To unlock the rail safety latches, slide the latches toward the front of the system.
   2. Push the system unit back into the rack until both system-unit release latches lock into position.
   3. Replace and tighten the two screws that secure the system unit to the rack.

• View cache battery pack removal movie
• Return to components list

• Power Hardware Information Center