Product Documentation
Abstract
9117-MMB (Power 770) - RAID cache battery pack "removal" movie
Content
RAID cache battery pack removal
To remove the RAID cache battery pack, follow these steps:
-
Remove the front cover.
- Pull out the latches located on both sides of the cover.
- Pull off the cover to remove it from the system unit.
-
Remove the cache battery pack.
- Do not remove the cache battery if the LED is flashing (green) because this indicates cache data exists.
- There are two cache battery packs on this card. Replace only the specific failing battery.
- Push tab fully to the right to disengage the battery retaining tab.
- Pull on the label tab of the cache battery pack to remove it from the controller.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HW1L1","label":"Power->Power 770"},"Platform":[{"label":"Platform Independent","code":"PF025"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"HW1M1","label":"Power->Power 780"},"Platform":[{"label":"Platform Independent","code":"PF025"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5083684