IBM Support

USB/video cable removal movie - IBM System x3550 M2 (7946), x3550 M3 (7944)

Product Documentation


Abstract

IBM System x3550 M2, x3650 M2 - USB/video cable removal movie

Content

Text from the audio portion of the USB/video cable removal movie

To remove the USB/video cable:

  1. Turn off the server and all peripheral devices, and disconnect all power cords and external cables.

Remove the top cover:

  1. Press down firmly on the blue tab on top of the cover and slide it to the rear until it disengages from the chassis.
  2. Lift the cover off the server and set it aside.

Remove the bezel:

  1. Remove the four screws that secure the bezel to the server.
  2. Remove the two hex studs that secure the video connector to the bezel.
  3. Rotate the top of the bezel away from the server and lift it off.

Remove the USB/video cable:

  1. Disconnect the usb video cable from the system board
  2. Push the cables forward to release the usb connector from the tabs in the chassis and then carefully pull the cable out of the server.

For specific instructions for the removal and installation of hardware.

Document Location

Worldwide

Operating System

System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WKC","label":"System x->System x3550 M2->7946"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SMA","label":"System x->System x3550 M3->7944"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-5082262

Page Feedback